Audio and visual sample rates

hello
everytime i capture using FCE it comes up with the warning that my rates do not match and says 'make sure the audio sample rate of your capture preset matches the sample rate of your tape'.
when i ignore this warning, the visual and audio often match nonetheless. then at times they do not, and there is a definite lag.
i posted a question about this before and the reply was to change the settings in Easy Setup to DV-NTSC. however, this did not work. i bought my camera in the uk (it is a sony DCR PC330E PAL) and so can't really see why ntsc would work.
im sure this is a simple problem, but i am too inept to solve it! can anyone offer any help?
thanks in advance

Hi(Bonjour)!
It's important to match video and audio format between your sequence(project) and your shooted material(camcorder settings).
If you camera support PAL or NTSC, select the correct video format in easy setup dialog. That's the video format.
Check your camera settings for audio format: there are 2 options 12 or 16 bit (in standard DV). It's preferable to use 16 bit with FCE.
Select the correct audio format in easy setup dialog: if your shooted in 12 bit, select 32 kHz in easy setup. If you shooted in 16 bit, select 48 Khz in easy setup. That's the audio format
Michel Boissonneault

Similar Messages

Error message trying to synchronise audio and midi sample rate 42463

I have a Rode Podcaster mic that is terrific. It has been working fine in GB. suddenly I am getting this when I try to record my podcast:
'Error message trying to synchronise audio and midi sample rate 42463 recognised. Check conflict between Garageband and external device'
Has anyone experienced this before? How do I resolve it? I'm still using my Version 6.0.5.
Apple, is this a way of forcing me to upgrade to V10?

Just click the icon on each track that stops it acting as a live input. It looks like a sound wave. Only have them clicked orange when using the track to record! I don't know if that will solve your problem!

Error while trying to sync audio and MIDI, sample rate 39100 recognised??

When I press record a message appears saying 'error while trying to syncronise audio and MIDI, sample rate 39100 recognised. Check conflict between garage band and external device. I'm using a Behringer UMC-202 interface. The inputs are selected as the device but no audio is present either.

Just click the icon on each track that stops it acting as a live input. It looks like a sound wave. Only have them clicked orange when using the track to record! I don't know if that will solve your problem!

After detaching audio, audio and visual shift

After I detached the audio from the video in a trimmed clip, the audio and visual both shifted from what point in the clip they were located before, making the person repeat what they just said. How can I fix this? I know better than to hope for a magical preference setting that will solve everything, but why does this happen? And how can I fix it? Are other people experiencing this issue?

What part don't you understand?
I have a trimmed clip that I detached the audio from. The portion of the video and the audio that is being displayed is a different part of the raw footage (<1 sec off).

Psych 08:01 SD severe audio and visual desyncronization and stuttering.

I bought the Standard Definition Version of Psych 08:01, and I am getting severe audio and visual desyncronization and stuttering. I even tried downloading it and redownloading it, but to no avail. I also tried running itunes without anything else on, but that didnt work either.
OS Name: Microsoft Windows 7 Professional
Version: Service Pack 1
System Type: x64-based PC
Processor: AMD FX(tm)-4130 3.8 Ghz Quad-Core Processor
RAM: 8.00 GB
GPU: EVGA GeForce GTX 650 2GB Superclocked 2048 MB, 128 bit GDDR5, 5000 MHz (effective), 80 GB/s Memory Bandwidth 384 CUDA Cores, 1202 MHz GPU, 38.4GT/s Texture Fill Rate

Hello Rcannon95,
Thanks for using Apple Support Communities.
Please follow the directions in the article below to report a problem about your recent iTunes Store purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Take care,
Alex H.

How to change audio capture devices sample rate

I am going to develop a online voice chat applet. Now everything works fine. But I didn't find anyway to capture audio in a lower sample rate. The default sample rate is 441000Hz. I am using MediaLocator to capture audio and pass it into Processor.
MediaLocator ml = new MediaLocator("dsound://");
DataSource ds;
DataSource clone;
try {
ds = javax.media.Manager.createDataSource(locator);
} catch (Exception e) {
return "Couldn't create DataSource"+e.getMessage();

Use GSM format and do it with setting of BitRateControl. It is better than convert the sample rate of your capturing device. I suppose that you try to reduce load of network traffic with changing sample rate, right?
Best regards from Germany,
r.v.

The whole audio sync/weird sample rate/drift issue (FCP6)

I can tell this question is doomed to fail on account of viewing the other unanswered questions on the subject in the forums, but I'll try nonetheless!
So yeah, importing longer DV clips....audio rate winds up being 'weird' (as in 48003.9kHz instead of 48). Any way of straightening that out that doesn't require a buncha hoops? I've already tried re-exporting it from QT at 48kHz and a few other things. Do I just have to capture in separate chunks instead of one big go?
I found a doc that says, "In previous versions of Final Cut Pro, the "Sync Adjust Movies Over [n] Minutes" option could be enabled in the preferences, triggering an adjustment in the audio sample rate based on the amount of audio recorded to disk during capture. In Final Cut Pro 4 [and up, I'm guessing] this preference has been replaced by automatic audio rate analysis, specific to DV media..."
Apparently this rate analysis ain't working as well as it should...or something...
Anyone?
Thanks,
E

If your footage was shot with the Panasonic dvx100 camera, there is a known audio sync issue. You can install a patch from disc 1 of the FCP install discs inside of the "extras" folder. I've had this problem from time to time and I capture DVCPRO 50, so it's not just a mini DV issue. I usually get an audio rate slightly below 48, like 47.89999 or so. Are you using capture now? I used to get this problem a lot more when using capture now as opposed to log and capture. My solution has always been to always use log and capture and keep clips 15 minutes or shorter. I've tried trashing prefs and all that jazz, swapping out hard drives, but log and capture and shorter clip lengths always seem to clear it up.

Audio Midi Setup Sample Rate not Saving

Hi Folks,
I have Propellerhead Reason, Logic Express 8 and Line 6 gearbox running on my Macbook Pro, but every time I access the Audio/Midi Setup and change the sample rate to 48kHz, it reverts back to 44.1kHz whenever I restart my computer. It's absolutely driving me up the wall as none of my audio works (even in iTunes) until I reset it back to 48kHz. I've set all of my preferences in each of the apps to 48kHz, so I really don't understand why it's not saving in the A/M Setup. Oh, I have also tried deleting the library script for A/M Setup to let it generate a new one, but still no improvement.
Please can someone help?
Best,
Deac.

Mouse was attached to the wrong port.
When I removed the usb mouse cable from the computer and attached it to the keyboard port then attached the iMic cable directly to the computer--my Input suddenly made an appearance. *dances to the music*
Problem solved.

FCP Stops Capturing and Gives Sample Rate Error

I've just installed FCP 6 and began capturing from MiniDV. After 9:25;23, the capture stops "due to lack of disc space" and then tells me that the audio sample rate for the capture clip doesn't match that of the source.
This is a new install, but the previous install on another machine didn't have that problem.
Help me. My hair is getting thinner from tearing it out.

What are you capturing to? An external drive? Is it formatted macosextended? Are you connecting to it via firewire? Have you run diskwarrior on the drive? Is the audio on the minidv 48k 16 bit or 32k 12 bit? Does the capture preset match this?

Out of sync audio and visual when streaming

over the last week all streaming through netflix, BBC iplayer and YouTube appsthe audio and video out of sync. The visual lag behind gets progressively further behind the longer you watch. Anyone having this problem and got a fix? Thanks

Hey Gem_stone,
Welcome to Apple Support Communities.
It sounds like there is an issue with audio and video being out f sync in several apps on your iPad. The article linked below provides a lot of general troubleshooting tips that will resolve most issues like that.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
I hope this helps.
-Jason

Converting Units in LabView and specifying sampling rate with Universal Library functions

Hi,
I am having trouble converting units in LabView 7.0 and having it write to a file / output on a chart in Nm instead of in volts. I can't seem to find any straightforward instructions, eventhough it seems like a simple task.
Another task that would seem rather simple is changing the sampling rate with the XAIn program from the Universal Library for LabView (this is version 5.40).
If anyone could help me out, I would greatly appreciate it - I have tried other sources without much luck!
Thanks
Jenna

Are you really needing to change units or do you need to scale the voltages read from your sensors? If it's scaling, it would be trivial to set this up in mAX or with the DAQ Assistant if you were using an NI board. Since you are not, then you could use the Scaling and Mapping Express VI. The y axis of a chart is just a label. You can use the text tool to change it to anything you want.
I have no idea how to change sample rate for your board. Have you asked the vendor?

Conflict between the saved data and the sampling rate and samples to read using PXI 6070e

Hello, I am using PXI 6070e to read an analog voltage. I was sampling at 6.6 MHz and the samples to read were 10. So, that means it should sample 10 points every 1.5 um. The x-axis of the graph on the control panel was showing ns and us scale, which I think because of the fast sampling and acquiring data. I use "write to measurement file" block to save the data. However, the data was saved every 0.4 second and as 35 points data at the beginning of each cycle (e.g. 35 points at 0.4 sec and 35 at 0.8 sec, and so on) and there was no data in between. Can anyone help me how there are 35 reading points every cycle? I could not find the relation between the sampling rate and samples to read, to 35 points every 0.4 second!
Another thing, do I need to add a filter after acquiring the data (after the DAQ assistant block)? Is there anti-aliasing filter is built in PXI 6070e?
Thanks for the help in advance,
Alaeddin

I'm not seeing anything that points to this issue. Your DAQ is set to continuous acquire. I'm not sure if this is really what you want because your DAQ buffer will keep overwriting. You probably just want to set to Read N Samples.
I'm not a fan of using the express VIs. And since you are writing to a TDMS file, I would use the Stream to TDMS option in DAQmx. If you use the LabVIEW Example Finder, search for "TDMS Log" for a list of some good examples.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

MHP(XletView) streaming audio and video sample

I need some sample which uses streaming audio and video for Xletview, where can find it??

Hi,
If you want some examples check the pege:
http://www.mhp-interactive.org/code/codesamples.shtml
Have a nice playing
Regards, Martinez

16 bit or 24 bit and what sampling rate?

Hi there
I have a Metric Halo Mobile I/O ULN-2 and an Intel iMac dual processor with 2Mb RAM. Should I be using 24-bit recording because I'm capable of doing so or is there no real world benefit? Also, what about the sample rate?
I'm producing music for CD and MP3.
Any thoughts welcome!
Thanks.
Steve

Always 24 bit. I'd rather have less tracks at 24 bits than more tracks at 16 bits. It's a difference most people, even non-musicians and engineers, can hear.
Sample rate: Most people will pick a sample rate based on the delivery format (44.1 for CD, 48 for DVD, etc.) if you don't know where the files will end up, 44.1 or 48 are both fine for rock and pop. Personally, I like 48. I used to do everything at 44.1 because 99% of the recording I do is for bands putting out CD's, which have a sample rate of 44.1.
Recently I have discovered that I like the way 48 sounds a little better. Maybe the machine likes it better, or something. I did a bunch of recording at 96 and 88.2 for a while but the files were huge and the extra dynamic range was not worth the extra trouble, IMO. That said, there are times when you'd want to use higher rates. In any case, I'm gonna say go with 24/48 unless there's a reason to use something else. I would also say experiment and listen so you are familiar enough with your gear that you'll know when to deviate from the norm.
-John

IChat audio and visual won't connect on my home network, but will on others

Hi there,
So here's my problem: When I try to connect via audio or video with iChat 5.0.3 it returns and error saying iChat can't connect. Text chatting works just fine. It only does this on my home network; I can take it work and connect to work's network and iChat functions just fine. My wife also has a mac using snow leopard and her iChat doesn't work either. We can connect to each other on our home network and use audio and video chat, but just can't connect to other networks. I'm using ATT&T U-verse and their 2wire modem/wireless router (model 3600hgv) that came with it, along with an airport extreme.
After carefully studying the other posts about iChat, I disconnected the airport and just used the 2wire, modifying the port settings as per the port forward website. I realized that the airport could have been using DHCP in addition to the 2wire, that's why I disconnected it. After doing these things, iChat still doesn't work. I'm not sure where to go from here.
Any help would be VERY much appreciated

Hi,
Nice info.
Does the 2WIre device you have include having UPnP ?
Different manufactures put it in different places so it could be anywhere in the set up pages.
If not does it have Port Triggering (Special Applications) ?
You will need to use this as you want to use two computers with the same ports.
This needs a different set up to Port Forwarding.
Alternatively put the 2Wire in DMZ (This opens all the ports to one IP)
List the IP the Airport device gets.
(It would be better yet if the DHCP was turned Off - the Airport would then need to be set up for Static routing (Manually) to keep the same IP)
This is the closet number to your model
http://portforward.com/english/routers/port_forwarding/2wire/3800HGV-B/iChat.htm
Did you set all the ports ? (These are the iChat 3 set but cover all the ones iChat 4 and 5 use)
Did you do the bit at the bottom ? (move the items to the right hand list that you want to use - listing both computers at the text field that reads "JoannasDell" (one at a time if it allows two computers by this method)
10:37 PM Monday; February 7, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Audio and visual sample rates

Similar Messages

Maybe you are looking for