Audio Buffer error with command line app

I run a program called SBAGEN, which is a binaural beat frequency program that runs from Terminal.app - lately, when I invoke one of the scripts for this program, I get this error:
Set audio output buffer size failed, status = 1852797029
any ideas as to how to solve this?
Thanks

Resolved this issue on my own:
*SYSTEM PREF—-> SOUND —–> SOUND EFFECTS*
I needed to make sure that under +SOUND EFFECTS+, that the following was selected in the drop down menu +“Play sounds and alerts from”+: *SELECTED SOUND OUTPUT DEVICE*

Similar Messages

Package command line app with AIR app

Forgive me if I seem completely dense, but I've been googling and forum finding and hair pulling all day on this.
I wrote a command line application and I call it from my air application. It all works just fine, but right now the location of the command line application is hard coded. I want to know:
1) What is the actionscript that allows me to refer my nativeProcess call to a an application that is packaged with the air app when I export?
2) Where do I place the command line application in the file system of flash builder to bundle it with everything when I export?
I realize it'll be different for mac and windows, but I need to do both. I'm starting with the mac. Right now as far as I know I can put the command line app in the source folder and that all ends up in the .app/contents/resources folder, but I'm not exactly sure how to reference that in actionscript or if I can or if I should? I don't know. Clue me in?

Can you not use File.applicationDirectory.url as a base?

[SOLVED] gcc: error: unrecognized command line option '-V'

Hi.. this is my first post but I always read the forum to solve my problem! ;) thank you to all!!!! sorry for my bad english in advanced...
This is my problem:
I have Archlinux x86_64 with Gnome (last version).
I try to install the driver for my printer epson sx218 but when I compile the bash show:
checking for gcc... gcc
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
now, I see the config.log file and I see the line:
gcc: error: unrecognized command line option '-V'
my makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl, -O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j2"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs libtool staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
this is my full config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by epson-inkjet-printer-filter configure 1.0.0, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure LDFLAGS=-Wl, -O1,--sort-common,--as-needed,-z,relro -Wl,--no-as-needed --prefix=/opt/epson-inkjet-printer-workforce-320-sx218
## Platform. ##
hostname = localhost
uname -m = x86_64
uname -r = 3.9.3-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Sun May 19 22:50:29 CEST 2013
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin/core_perl
## Core tests. ##
configure:1989: checking for a BSD-compatible install
configure:2045: result: /usr/bin/install -c
configure:2056: checking whether build environment is sane
configure:2099: result: yes
configure:2127: checking for a thread-safe mkdir -p
configure:2166: result: /usr/bin/mkdir -p
configure:2179: checking for gawk
configure:2195: found /usr/bin/gawk
configure:2206: result: gawk
configure:2217: checking whether make sets $(MAKE)
configure:2238: result: yes
configure:2480: checking for gcc
configure:2496: found /usr/bin/gcc
configure:2507: result: gcc
configure:2745: checking for C compiler version
configure:2752: gcc --version >&5
gcc (GCC) 4.8.0 20130502 (prerelease)
Copyright (C) 2013 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2755: $? = 0
configure:2762: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.8.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.8-20130502/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --enable-gnu-unique-object --enable-linker-build-id --enable-cloog-backend=isl --disable-cloog-version-check --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --with-linker-hash-style=gnu --disable-install-libiberty --disable-multilib --disable-libssp --disable-werror --enable-checking=release
Thread model: posix
gcc version 4.8.0 20130502 (prerelease) (GCC)
configure:2765: $? = 0
configure:2772: gcc -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:2775: $? = 1
configure:2798: checking for C compiler default output file name
configure:2825: gcc -march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl, -O1,--sort-common,--as-needed,-z,relro -Wl,--no-as-needed conftest.c >&5
cc1: error: argument to '-O' should be a non-negative integer, 'g', 's' or 'fast'
configure:2828: $? = 1
configure:2866: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "epson-inkjet-printer-filter"
| #define PACKAGE_TARNAME "epson-inkjet-printer-filter"
| #define PACKAGE_VERSION "1.0.0"
| #define PACKAGE_STRING "epson-inkjet-printer-filter 1.0.0"
| #define PACKAGE_BUGREPORT "epson@localdomain"
| #define PACKAGE "epson-inkjet-printer-filter"
| #define VERSION "1.0.0"
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2873: error: C compiler cannot create executables
See `config.log' for more details.
## Cache variables. ##
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=set
ac_cv_env_CXXFLAGS_value='-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_F77_set=
ac_cv_env_F77_value=
ac_cv_env_FFLAGS_set=
ac_cv_env_FFLAGS_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value='-Wl, -O1,--sort-common,--as-needed,-z,relro -Wl,--no-as-needed'
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=yes
## Output variables. ##
ACLOCAL='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run aclocal-1.10'
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run tar'
AR=''
AUTOCONF='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run autoconf'
AUTOHEADER='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run autoheader'
AUTOMAKE='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run automake-1.10'
AWK='gawk'
CC='gcc'
CCDEPMODE=''
CFLAGS='-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4'
CORE_LIBRARY_PATH=''
CORE_RESOURCE_PATH=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CUPS_IMAGE_LIBS=''
CUPS_LIBS=''
CUPS_SERVER_DIR=''
CXX=''
CXXCPP=''
CXXDEPMODE=''
CXXFLAGS='-march=native -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4'
CYGPATH_W='echo'
DEFS=''
DEPDIR=''
DL_LIBS=''
DSYMUTIL=''
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
F77=''
FFLAGS=''
GREP=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LDFLAGS='-Wl, -O1,--sort-common,--as-needed,-z,relro -Wl,--no-as-needed'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LN_S=''
LTLIBOBJS=''
MAKEINFO='${SHELL} /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run makeinfo'
NMEDIT=''
OBJEXT=''
PACKAGE='epson-inkjet-printer-filter'
PACKAGE_BUGREPORT='epson@localdomain'
PACKAGE_NAME='epson-inkjet-printer-filter'
PACKAGE_STRING='epson-inkjet-printer-filter 1.0.0'
PACKAGE_TARNAME='epson-inkjet-printer-filter'
PACKAGE_VERSION='1.0.0'
PATH_SEPARATOR=':'
RANLIB=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STDCPP_LIBS=''
STRIP=''
VERSION='1.0.0'
ac_ct_CC='gcc'
ac_ct_CXX=''
ac_ct_F77=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE=''
am__include=''
am__isrc=''
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='$(SHELL) /home/liberato/Scaricati/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='/usr/bin/mkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/opt/epson-inkjet-printer-workforce-320-sx218'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
#define PACKAGE_NAME "epson-inkjet-printer-filter"
#define PACKAGE_TARNAME "epson-inkjet-printer-filter"
#define PACKAGE_VERSION "1.0.0"
#define PACKAGE_STRING "epson-inkjet-printer-filter 1.0.0"
#define PACKAGE_BUGREPORT "epson@localdomain"
#define PACKAGE "epson-inkjet-printer-filter"
#define VERSION "1.0.0"
configure: exit 77
any idea to solve? I searched around but can not find anything.. :'(
Last edited by liberato83 (2013-05-24 13:25:18)

Are you using AUR https://aur.archlinux.org/packages/epso … 320-sx218/ ?
I updated the PKGBUILD to remove the line that says 'gcc -V >&5' from the configure file
libtoolize
sed -i 's/gcc -V >&5//' configure
chmod +x configure
but it still doesn't build:
==> Starting build()...
libtoolize: putting auxiliary files in `.'.
libtoolize: linking file `./ltmain.sh'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 1572864
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for dlopen in -ldl... yes
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for memset... yes
checking for strdup... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating src/raster/Makefile
config.status: creating src/raster/blendSource/Makefile
config.status: creating src/memory/Makefile
config.status: creating src/pagemanager/Makefile
config.status: creating src/filteropt/Makefile
config.status: creating config.h
config.status: executing depfiles commands
cd . && /bin/sh /home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run automake-1.10 --gnu
/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing: line 54: automake-1.10: command not found
WARNING: `automake-1.10' is missing on your system. You should only need it if
you modified `Makefile.am', `acinclude.m4' or `configure.ac'.
You might want to install the `Automake' and `Perl' packages.
Grab them from any GNU archive site.
cd . && /bin/sh ./config.status Makefile
config.status: creating Makefile
cd . && /bin/sh /home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/missing --run autoheader
rm -f stamp-h1
touch config.h.in
cd . && /bin/sh ./config.status config.h
config.status: creating config.h
make all-recursive
make[1]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0'
Making all in src
make[2]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src'
cd .. && /bin/sh ./config.status src/Makefile depfiles
config.status: creating src/Makefile
config.status: executing depfiles commands
make[2]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src'
make[2]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src'
Making all in memory
make[3]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src/memory'
cd ../.. && /bin/sh ./config.status src/memory/Makefile depfiles
config.status: creating src/memory/Makefile
config.status: executing depfiles commands
make[3]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src/memory'
make[3]: Entering directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src/memory'
/bin/sh ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../ -D_FORTIFY_SOURCE=2 -fsigned-char -O2 -MT memory.lo -MD -MP -MF .deps/memory.Tpo -c -o memory.lo memory.c
../../libtool: line 482: CDPATH: command not found
libtool: Version mismatch error. This is libtool 2.4.2, but the
libtool: definition of this LT_INIT comes from an older release.
libtool: You should recreate aclocal.m4 with macros from libtool 2.4.2
libtool: and run autoconf again.
make[3]: *** [memory.lo] Error 63
make[3]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src/memory'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/karol/test/foo/epson-inkjet-printer-workforce-320-sx218/src/epson-inkjet-printer-filter-1.0.0'
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...

Launch executable with command line arguments

I have a programmer that I need to launch in my cvi code. I tried the system command and lauchexecutable command but cannot get the programmer to lauch correctly. If I run it from the command prompt or create a windows shortcut it works fine. Here is the shortcut I created:
C:\TPD\SAVS20P3\asix\up\up.exe /e c:\tpd\savs20p3\q33.hex/erase /q /p
I'm trying to run the up.exe software with /e c:\tpd\v20_hex\v20.hex /erase /q /p as the command line paramters.
I tried the following code which created the above path with command line
strcpy(filename,"C:\\tpd\\savs20p3\\asix\\up\\up.exe /e c:\\tpd\\savs20p3\\hex_ee\\"); ///e c:\\tpd\\savs20p3\\hex_ee\\"");
strcat(filename, hfile);//hex file name will change dynamically
strcat(filename, "/q /p");
I then tried LaunchExecutable(filename) and system(filename). The system functions gives an error. Its trying to lauch the /e c:\tpd\v20_hex\v20.hex file
any suggestions. I beieve its a simple syntax error.

Well, apart evident typos in the code you posted, which is not creating the command line you stated, I can only think that before "/q" you should add a space to separate the option from the filename.
This code should create the correct command line:
strcpy (hfile, "c:\\tpd\\v20_hex\\v20.hex");
strcpy (filename, "C:\\tpd\\savs20p3\\asix\\up\\up.exe /e ");
strcat (filename, hfile);
strcat (filename, " /erase /q /p");
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

SQL Server 2008 Express Installation with command line options , FAILED.

HI,
I Have SQL Server 2005 Express instances on my PC. Now i am trying to install 2008 Express edition with Advance Services(Reporting.)
I am trying to install the SQL Server 2008 Express with command line Options.
/qs /Action=Install /Hideconsole /SecurityMode=SQL /Features=SQL,Tools,RS /InstanceName=XXXXXX /SAPWD="StrongPassword" /SQLSYSADMINACCOUNTS="Builtin\Administrators" /SQLSVCACCOUNT="NT AUTHORITY\SYSTEM" /RSSVCACCOUNT="NT
AUTHORITY\SYSTEM" /BROWSERSVCSTARTUPTYPE=Automatic /TCPENABLED=1 /NPENABLED=1
But installation exits. It says the previous version 2005 tool are already exists, Remove them to Continue the 2008 Server Installation.
please suggest me how to avoid that check and continue installation by replacing the older tool with 2008 automatically.
regards
Pratap M:)

Have you found any error in event logs?
In my case even after uninstalling all 2005 related components it didn't worked. I had to resort to a brute force way and
remove following registry keys
32 Bit OS: HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\90
64 Bit OS: HKLM\Software\Wow6432Node\Microsoft\Microsoft SQL Server\90
Check below threads
http://stackoverflow.com/questions/175881/sql-server-express-2008-install-side-by-side-w-sql-2005-express-fails
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/5fc58507-9f40-4213-acbd-32a57c8822d7/cant-uninstall-sql-server-2005-express-tools?forum=sqlsetupandupgrade
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Import biar file with command line

Hi
I am trying to import biar file with command line on unix environment with BOXI R3.1 and Oracle DB
The biar file include one universe and it's connection (eFashion), one report and one user
when I run the command line:
java -jar /BO/boxi/bobje/java/lib/biarengine.jar /BO/boxi/test.properties
I recive the following error:
Failed to commit objects to server : Undefined Info Store error
An error occurred at the server during security batch commit:
Request 6 of type 36 failed with server error : Object not found (1433)
Request 11 of type 36 failed with server error : Object not found (1433)
Request 20 of type 38 failed with server error : Object not found (1433)
Request 26 of type 38 failed with server error : Object not found (1433)
Do you have any idea , what is the problem?
Thank you

Hi Denis
I found out after I create a biar file ,with only the user, through a command line. that the user did import since it was in a concurrent connectiontype , a type that not exit in the target environment.
But after I fix this in the source environment and saw that a biar file with only the user is loaded , I recreate the biar file with all the objects as before (user, universe, report , folder) and I still got the same error message as before.
So now I try to create the biar file with all those object through the command line. and I get a new errer message "Required dependencies not found on target system : '[AZK_.9sbf_lMgdQRpsbZfVw]"
I check it , and understand that the object is the report , but I do not see what missing..... : (
Those are the quries in the properties file:
exportQuery= SELECT * FROM CI_APPOBJECTS where si_kind = 'Universe' and si_name='eFashion'
exportQuery= SELECT * FROM CI_APPOBJECTS WHERE SI_ID in ( 894,926)
exportQuery= SELECT * from CI_SYSTEMOBJECTS WHERE SI_KIND = 'user' and SI_Name='repadmin'
exportQuery= SELECT * FROM CI_INFOOBJECTS WHERE si_kind= 'Folder' and SI_name = 'test'
exportQuery= SELECT * FROM CI_INFOOBJECTS WHERE SI_ID IN (2188)
Can you tell what is missing?

Flo – A command line app for organizing events, to-dos, and deadlines

Example
$ flo watch movie,d020
Ids are updated.
$ flo eat lunch,d11100-d11130
Ids are updated.
$ flo
0 08-16 20:00 d0 watch movie
1 08-17 11:00 d1 eat lunch
11:30 d1
Usage
flo [-a] [-c id] [-f from] [-r id] [-t to] [-w what] [what[,from][-to]]
Options
-a all items
-c id change item
-f from from date
-r id remove item
-t to to date
-w what
When changing an item, setting -f or -t to r removes the field.
Date formats
YYYYMMDDhhmm, MMDDhhmm, DDhhmm, DDhh, and DD are the valid date
formats. Replace DD with dn to set the date n days from today's date.
If the year or the month isn't specified, the current year and month is used.
For formats without a month, if the date specified is before today's date, the
month is set to the next month.
The value for hours and minutes is set to 00 if no other value is specified.
flo runs fast since it's written in C, and the goal is to keep it as simple as possible. It uses between 1–2 milliseconds to start when it's cached by the OS.
The package is named flo-git in AUR. The development happens on GitHub.
Last edited by alexanderte (2010-08-22 10:50:05)

alexanderte wrote:
Installation
git clone git://github.com/alexanderte/flo.git
cd flo
make
cp flo /usr/local/bin/
# optional
echo "alias f='flo'" >> ~/.bashrc
You should always use Pacman to install packages on Arch. Here's a PKGBUILD:
# Contributor: Xyne
pkgname=flo-git
pkgver=1
pkgrel=1
pkgdesc="A command line app for organizing events, to-dos, and deadlines."
arch=('i686' 'x86_64')
url="http://github.com/alexanderte/flo"
license=('ISC')
makedepends=('git')
provides=('flo')
conflicts=('flo')
_gitroot="git://github.com/alexanderte/flo.git"
_gitname="flo"
build() {
cd "$srcdir"
if [ -d "$_gitname" ] ; then
cd "$_gitname" && git pull origin
else
git clone "$_gitroot" "$_gitname"
cd "$_gitname"
fi
make
install -Dm755 flo "${pkgdir}/usr/bin/flo"
You can learn more about PKGBUILDs in the wiki: http://wiki.archlinux.org/index.php/PKGBUILD
I recommend that you upload it to the AUR as well, with any changes that you deem necessary. Don't forget to add yourself as the maintainer at the top of the file.

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.
iMac, OS X Mountain Lion (10.8.4), trying to get Logic Pro X

Hello jst84,
The following article may be helpful in getting your purchase to complete.
Mac App Store: "An unknown error occurred (100)" when purchasing
http://support.apple.com/kb/TS3637
Cheers,
Allen

How to convert XPS file to a PDF one via Adobe Acrobat XI Pro with command line?

Hello,
How to convert XPS file to a PDF one via Adobe Acrobat XI Pro with command line?

It is not good. If I need to export some hundred of separate *.XPS files to hundred separate *.PDF files, I need to do this manually with each file. It is stone age.

Can I add a New Folder to existing Business Area with Command Line?

Hi,
Can I add a New Folder to existing Business Area with Command Line in Discoverer (java or executable)? I am trying to do this with /load...
/connect walkep_apps/walkep@smpdev1
/load Visualizations /eul walkep_apps /user smp_naps_apps /object VISUAL_20K /capitalize /remove_prefix /insert_blanks
/aggregate DETAIL /show_progress
... but this creates a new business area, "Visualizations 1", which is not what we want! We want to add the VISUAL_20K to the existing "Visualizations" business area. Many thanks in advance.
Phil

Bang on. thanks
three's always an obvious solution.
I'll post another question about how to attached a file into a Mail message which is automatically compressed/zipped. Or do i have to find the file in Finder, compress it and then attached it?

How To Run An External .exe File With Command Line Arguments

Hiya, could anyone tell me how I can run an external .exe file with command line arguments in Java, and if possible catch any printouts the external .exe file prints to the command line.
Thanks.

Using the Runtime.exec() command. And read this:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

Cc1plus: error: unrecognized command line option "-m64"

I'm running a build script and getting the error below.. My colleges dont get that error building on ubuntu.. I'm running 64 bit arch..
Could this be a missing package or something?
cc1plus: error: unrecognized command line option "-m64"
make[2]: *** [qlog.o] Error 1
make[1]: *** [sub-common-core-all-ordered] Error 2
make[1]: *** Waiting for unfinished jobs....

but I've been trying to look at the build scripts and I cant find where it adds the -m64 option? Could it be that its added automaticaly by the arch build system somewhere?
And the build script will always build 32 bit so I dont get why they would ever add the -m64 option in our script
Last edited by nanook (2012-09-04 12:53:10)

Permission problems with command line CVS and Java CVS App

Greetings,
I'm part of a moderately sized website development team which recently upgraded to MacBook Pros (dual core) running OS 10.4.9. One of the primary tools we use in our day to day work is the open source concurrent versioning system (CVS). We've noticed a distressing issue running CVS on our macbook pros: there seems to be a problem with the way these new machines handle permissions on the directories/files that CVS uses to manage files.
The error occurs when the CVS application, in this case both command line CVS and GUI CVS application named SmartCVS, tries to rename a temporary file named Entries~ to its new name Entries (no ~). It looks like this:
java.io.IOException: Could not rename file
/Users/[USER]/Sites/[MODULE]/lib/CVS/Entries~ to
/Users/[USER]/Sites/[MODULE]/lib/CVS/Entries
at smartcvs.JP.a(SourceFile:125)
at smartcvs.JP.a(SourceFile:113)
We've noticed that if we open up a get info window on the directory we're downloading, and choose "Apply to enclosed items" right when we start the download process, the issue will be resolved, presumably because the permissions are being set on the subdirectories as the download is taking place.
We've checked the permissions on the overall ~/Sites/ directory numerous times, and they always seem to be set correctly as drwxr-xr-x. It's within this folder that CVS creates a directory with the CVS module name and downloads all the contained files, so we don't see why it would be having issues completing this successfully. We also checked to ensure the GUI CVS application is running under the current user on the machine: it does.
Has anyone run into issues like this in the past? Is there more information I could provide to further clarify the problem we're having?
Thanks for any input you have!

Thanks for asking Jeff, yes one place we are seeing this error is Java application SmartCVS, though the results posted here are from a normal command line CVS checkout.
===
Checkout command:
cvs co [MODULE]
===
Error:
cvs [checkout aborted]: cannot rename file CVS/Entries.Backup to CVS/Entries: No such file or directory
===
ID:
uid=502([USER]) gid=502([USER]) groups=502([USER]), 81(appserveradm), 79(appserverusr), 80(admin)
===
LS -ALN
Computer:~/Sites [USER]$ ls -aln
drwxr-xr-x 28 502 502 952 Jun 4 13:11 Sites
Computer:~/Sites/[MODULE] [USER]$ ls -aln
drwxr-xr-x 38 502 502 1292 Jun 4 13:33 www_root
Computer:~/Sites/[MODULE]/www_root [USER]$ ls -aln
drwxr-xr-x 32 502 502 1088 Jun 4 13:33 [SUBDIR1]
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1] [USER]$ ls -aln
drwxr-xr-x 5 502 502 170 Jun 4 13:33 [SUBDIR2]
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2] [USER]$ ls -aln
drwxr-xr-x 4 502 502 136 Jun 4 13:33 [SUBDIR3]
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2]/[SUBDIR3] [USER]$ ls -aln
drwxr-xr-x 6 502 502 204 Jun 4 13:33 CVS
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2]/[SUBDIR3]/CVS [USER]$ ls -aln
total 32
drwxr-xr-x 6 502 502 204 Jun 4 13:33 .
drwxr-xr-x 4 502 502 136 Jun 4 13:33 ..
-rw-r--r-- 1 502 502 45 Jun 4 13:33 Entries
-rw-r--r-- 1 502 502 45 Jun 4 13:33 Entries.Log
-rw-r--r-- 1 502 502 48 Jun 4 13:33 Repository
-rw-r--r-- 1 502 502 63 Jun 4 13:33 Root
MacBook Pro / MacPro Mac OS X (10.4.9)

Setting audio output levels automatically at login (even with command-line)

When I log in, the audio level seems to be at the level set by the last user. Is there a way to get this to automatically set to my preferred level when I log in?
A related question: Is there a command-line method of setting the audio level?
Thanks in advance,
Paul
Power Mac G5 Quad Mac OS X (10.4.8) 2GB ECC Memory

u could use scripting...
sudo osascript -e "set Volume 20"
using that at the command line will change the volume level to 20.
you could put that in a script or something and have it launch at login.
Beavis2084

Audio Buffer error with command line app

Similar Messages

Maybe you are looking for