Audio configuration trouble

Hi
As you can see in the attached image, I don`t have available the sound throug speaker and I can´t select it in the list of device for sound output.
Additionally, I can´t plug headphone in the minijack!! it is in only to the half of the mini-jack plug
Could you give me some advice?
Tam

I'm having the same problem - iTunes 10 uninstalled my audio driver and I can't seem to re-install it. I get no sound on anything.
Dell laptop, Windows XP

Similar Messages

Audio Configuration Trouble= No playback!

The following statement is popping up before Itunes opens..."itunes has detected a problem with your audio configuration audio/video playback may not operate properly" How do i fix this??

I'm having the same problem - iTunes 10 uninstalled my audio driver and I can't seem to re-install it. I get no sound on anything.
Dell laptop, Windows XP

Help! trouble with audio configuration

Ok, so here's my story. I got a virus that supposidly was only suppose to screw up with my msn. I did a system restore, but after that, I was no longer able to open up my iTunes. It said i had an error(-200), whatever that was. So then I removed my iTunes, and reInstalled it. But I still can't open it and now it says iTunes has detected a problem with my audio configuration. So I went to my control pannel and into my audio devices and all it really is is adjusting volumes and speakers and mics, and I don't know how to fix my iTunes problem. I just want my music back! Please help!
-Jessica

you've actually got the same error here as you had before. the -200 error displays as an "audio configuration" message in itunes 7.0.2.16.
they are typically caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.) so let's try swapping out your QuickTime.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

ITunes won't open because of audio configuration error

I updated iTunes, and now it says "iTunes cannot run because it has detected a problem with your audio configuration."
How do I fix this?

my itunes just wont open at all. i've done a MILLION trouble shooting steps, i've uninstalled and reinstalled a bunch of times.. and still when i click on it, it wont open. i downloaded a disk i had from buying my ipod and that older version of itunes worked but my ipod couldnt be used with it because "the ipod is too advance" and says to upgrade or something.. then when i do upgrade i return to the same problem, that it doesnt open! helpppp!

ITunes cannot run because it has detected audio configuration problem?

I've got Windows XP, recently did a system restore and was forced to re-install iTunes afterwards. After installation, I click the iTunes icon and get a pop up "iTunes cannot run because it has detected a problem with your audio configuration." I went to the iTunes support page and found a similar trouble shooting scheme. I applied both options and both failed. I tried re-installing again to repair, but after the repair, the problem still remains. I found a major difference in the trouble shooting scheme however and I wander if that could be it. The web page shows quick time's audio channels as "Stereo (L R)", however my quick time control panel doesn't feature that channel. Instead, there are 7 "LayoutTags" to choose from, each containing 7 digits. I'm no computer whiz, so I'm going to need help on this one.

replying to lowriderpharaoh.
hmmmmm. it's sounding like you've still got a damaged version of QuickTime in the PC. (or at least, there's something going wrong with the quicktime.)
let's try swapping out the QuickTime again. we'll take a few additional explicit precautions this time.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll try to get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
if it doesn't launch properly, are you still getting the unusual display effects in the QT preferences?

Itunes cant open due to Audio Configurations

I was Messing with my sound settings because of an over the internet Voice program called Ventrillo I don't think that the Program has anything to do with the error but I don't know how to get either itunes to open or how to get my sound settings back to default

Does this help?
iTunes has detected an audio configuration problem

ITunes wont open due to audio configuration.

Hopefully someone can help me, when I click to open iTunes, a message pops up saying "iTunes cannot run because it has detected a problem with your audio configuration." I have windows vista and dont know what I need to change or where I change it. Please help!
Nicole.

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Itunes starts but fails to open due to audio configuration problem

Hi
I have been running itunes 7.1 quite successfully until today. Running on windows xp/toshiba laptop.
Problem occurs when i select itunes on desktop, itunes appears on task bar below, after a number of seconds the following error message appears "itunes cannot run because it has detected a problem with your audio configuration", once I click ok on this message itunes terminates.
No changes have been made to my audio configuration (to the best of my knowledge), i can run Windows Media Player and that works fine, so too real player.
I reinstalled itunes, but this did not resolve the problem. I also ran itunes from another logon on my laptop and that presented the same error. I checked all my audio settings in the control panel and also ran the diagnostics on each device and all appears to be fine.
Has anybody faced the same issue, and could anybody advise on any diagnistic tool that could assist in pinpointing the configuration problem?.
Thanks
Toshiba Satellite Windows XP Pro

Hi
Got it resolved, thanks for the prompt responses all!.
Resolved by removal current version of Quicktime thru the control panel (add/remove programs), and then reinstalled from the website.
Phew!
Toshiba Satellite Windows XP Pro

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

Problem with audio configuration after upgrading to iTunes 7.5

After being forced to upgrade to iTunes 7.5 (when downloaded a new song form the Music Store), an error message is displayed when I launch the application, "ITunes cannot run becuase it has detected a problem with your audio configuration". The application exits immediately.

Try the instructions in this article.
(26574)

Itunes doesn't work because of my audio configuration...

I downloaded itunes to update my current one and I have been using itunes for a while now when I try to open it it says "iTunes cannot run because it has detected a problem with your audio configuration" What should I do?

Hey Jontheruler,
Try the tips in this article: http://docs.info.apple.com/article.html?artnum=304424 , they should get rid of that error message.
Jason

Failure to launch...audio configuration issue!

I just upgraded to 7.0.2 and now iTunes will not launch. When I try to open iTunes I get the following message: "iTunes cannot run because it has detected a problem with your audio configuration."
This has never ocurred before and I don't know how to fix this annoying problem. I've tried a few of the troubleshooting options but none of them worked.
What should I do???
Dell Inspiron 6000 Windows XP

"iTunes cannot run because it has detected a problem with your audio configuration."
that one is typically associated with a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
so let's first try swapping out your QuickTime.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Problem with audio configuration

when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
instructions at: http://docs.info.apple.com/article.html?artnum=93698
Thanks giterdone

Audio configuration trouble

Similar Messages

Maybe you are looking for