Audio Disappears from Viewer

Three years running this program here's a new one:
Clip in the Viewer. Moving back and forth in the clip (I use long clips and set In and Out points as needed) with audio playing fine. Drop edits into Timeline, all fine
"Suddenly" I lose the audio in the Viewer. Drop the clip into the Timeline, audio is fine. If I shut down and relaunch FCE, all good again. This has happened twice now in twelve hours
Perhaps my big fingers have hit something but I can't figure what. When I click on Audio in the Viewer, the levels are set correctly, but when I play the clip there, no audio in the speakers, no audio in the Level Meters. Yet, if I drop it into the Timeline, all is good. I don't seem to see anything in the Modify menu that is set incorrectly.
Audio all matches in Sequence, Project etc. As I said, never had this prob before.
PS .. .this is all happening on the G5.
Cheers

Yeh ... I haven't solved it either. But tomorrow I start a new project so we will do the the Trash Prefs dance and see how it goes
Any other thoughts, as always, much appreciated

Similar Messages

Clicking links in emails in Thunderbird, Firefox disappears from view

When clicking links in emails in Thunderbird Firefox disappears from view along with its task bar button. Firefox is still open and works, if you know what you are clicking on and prevents other still visible windows being worked with as the mouse only "sees" the Firefox window invisible to human eye!

The irony that you sent me an email to confirm my post...by clicking a link... is not lost on me.

When selecting playback from itunes library on Mac (purchased album from itunes!) i get random song played from that album and my selected song disappears from view. Nothing to do with shuffle.Mac OSX 10.6.8. Help, doing my nut in!!

When selecting playback from itunes library on Mac (purchased album from itunes!) i get random song played from that album and my selected song disappears from view. Nothing to do with shuffle.Mac OSX 10.6.8. Help, doing my nut in!!

What is your iTunes version?
If iTunes 11, have you checked the "Up Next" list? If it is not empty, try if clearing "UP Next" will help:

My library keeps disappearing from view when I open itunes

I recently bought a laptop and have transferred all my music from my old PC computer to my laptop. I have noticed that when I open itunes from time to time my library has disappeared from view. It's annoying as I have to keep bringing my library back in from my music folder, importing my playlists and then the podcasts have to be resubscribed. It also means I keep losing my play counts and history. It has happened about 4-5 times now. Then when I restore the library and I link my classic ipod to sync all the content has to be reloaded, which all takes time. Is there something silly that I have not done. I have been searching to see where I am going wrong and now about to lose the plot alltogether! My laptop is using Windows Vista, my PC was Windows XP. Any help much appreciated. I'm sure it's something simple!

Hello Goldie24,
And welcome to Apple Discussions!
I don't have any direct answers for you when it comes to this issue, but I can point you somewhere where others might. Check out this older thread. It may end up leading you to another older thread, but it should lead you to the solution needed for this issue.
http://discussions.apple.com/message.jspa?messageID=9345281
Hope this helps.
B-rock

"Reload" disappeared from "View" dropdown- asking again

Can't find my already-asked question posted on forum so I'm asking again: "Reload" option has disappeared from "View" drop-down in navbar. I have tried all of the following, as suggested by a contributor:
Restarting with Add-Ons Disabled
Restarting with "Reset" option
Disabling hardware acceleration
Completing entire troubleshooting protocol for add-ons & extensions
Nothing has restored the "Reload" option. The Add-Ons Manager tells me there are no extensions installed, so there's nothing I can follow to troubleshoot there.
What else can I do? If nothing, I'm switching to Safari for default browser. Don't want to as I've liked Firefox, but I use "Reload" a LOT and this situation is not sustainable for me.
Really stuck and really

If your talking about the reload button that Refreshes the page your on you can do one of two options
'''Reload the page using the shortcut:'''
Mac: Command+R
Windows: CTRL+R Or F5
Liunx: CTRL+R
'''Pressing the Reload Button'''
On the default Firefox Layout (no custom toolbars, Buttons, ECT, installed)
You can do so by pressing this button here(see pic):
<img src="http://i1085.photobucket.com/albums/j428/tyr5678/34d92e00-e024-4399-be2c-893d8ff052d4_zps3b46e294.jpg" border="0" height="30px" alt=" photo 34d92e00-e024-4399-be2c-893d8ff052d4_zps3b46e294.jpg"/>

How to open Viewer from other apps? - App 'URL Scheme' has disappeared from Viewer Builder!

Hello
The 'URL Scheme' option in the Viewer Builder did let me to specify a url that made other apps open my viewer. But this option has disappeared from the newer version of Viewer Builder. So. How do I do now to let other apps open my viewer?

Is there a spacial reason that the URL scheme option was taken away from ordinary Multi-issue viewers? It was there in earlier version. I'll explain our situation:
Our client want to publish corporate information; annual reports etc, with DPS. Not really magazines or newspapers you subscribe to.
We are making another app where they publish news articles, videos etc. In that app, we want to have a link which opens the viewer with their publications.
To make this simple thing work, we have to create a 'subscription' to content which is not relly good for subscribing (it is free and announced with push anyway). We also have to tell the client to create Privacy Policys etc for this. A lot of hassle for something we do not really want.
Any chance that this option will come back in v19?

Issue with Random Blocks of Audio disappearing from Timeline

I am having a problem with seemingly random blocks of audio tracks disappearing from my edit. I will be scrolling through somewhere I haven't worked on or even looked at, in a few hours or days, and I'll be missing chunks of audio. At first I thought I was just losing my mind, but I can see that transitions that I've tacked on at the ends to fade in/out are still there in their "storylines", just floating by themselves. Its almost like they were just straight up deleted by hand. But I know that I didn't do any such thing. So, what is going on? This isn't the first time its happened, and its impossible to know when it does, so I could end up losing hours of work reverting to a backup. But it is equally frustrating (slowly) flicking back and forth between two projects to copy the audio tracks back every few days. It also mostly seems to happen on audio with transitions/crossfades, but I have found a few places where it has just been reduced to 1 frame. Weird.
I am working on a fairly complex film about 45 minutes in length, with compound clips of synced interviews cut up in the "Main" storyline, then with action shots and info stacked on top, and some 1-3 minute music tracks and video-less narrations below. Working on a 5 month old MBP, 10.9.5, 16gb ram, everything's up to date
I just need this to stop happening is the main thing. What can I do about it? It is very frustrating that these bugs are still popping up all the time. Not a thing that should be expected from a "pro" application.
Thanks for any insight.
Screen Shot below is example: you can see where 4blocks have been deleted, just leaving the crossfades hanging. Extremely annoying, and time wasting.

This is a user forum. I have not seen the issue you describe before.
You could use the Provide Feedback command in the application to give feedback to Apple.

Airport Express won't join network and disappears from view once configured

Hi. I am having trouble getting my brand new Airport Express to connect to my network. I would appreciate any help you can provide. Here are the details:
Computer: iMac, G5 running OS X Tiger.
Network: Cable modem hooked to a netgear wireless b/g router. The router is configured to use WEP 128 bit encryption. I have connectivity on the router throughout the house on several computers and handheld devices (iPhone, etc).
Airport Express Version: 5.3.1
My goal is to add the AE to my current network in order to stream music from iTunes to my receiver.
When I initially opened up the airtunes utility to set up the AE the setup program was able to find the AE and walk through the configuration process. I followed the steps, entered the correct network name, encryption algorithm, password, etc. When I completed setup and hit the update AE button the AE disappeared from the setup application and the device began to flash yellow. While troubleshooting I have reset the AE dozens of times over the past couple of days. I have done both the reset with power on (press reset for 10 seconds waiting for the quickflash) and the hard reset (plugging the AE in with the reset button depressed until the quickflash starts). In either case, the AE is rarely detected by the setup utility (about 1 in 10 times). When it is detected, I walk through the set up and get the same results. I have attempted configuration using both the manual configuration option and the automatic "wizard-like" method.
I have tried to configure the AE wirelessly with it plugged in next to the computer and using a direct hookup via ethernet cable. Both methods produce the same results - flashing yellow light with AE undetectable by any Airport applications.
I have also tried to load an older version of the firmware (5.3) on the AE. When I hit the update AE button after configuring the update to go from the current version to version 5.3 I get an error message stating that "an error occured while attempting to update."
Thanks in advance for any help you can provide.

Hi guys,
I think I'm having the same problem as you all, and its driving me crazzzzy!. I added an AX to my existing network with a AEX all thru gigabyte switch, including the new AX. I set the brand new AX up with all the settings, hit update, all settings were configured and its working fine (i can see it in iTunes, stream music to it, all works fine) EXCEPT when i go to AU and try to go into the manual setting of the AX it just hangs, and after about 2 min, i get an error message:
"An error occurred while reading the configuration. Please make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6722)"
I have tried resetting it hard/soft/default but not sure if it really does reset it, still keeps same password, and network settings. Tried connecting it next to my existing AEX incase the AX is trying to communicate via WIFI instead of the hard wired ethernet. I'll try hard wiring it directly to my mac as some have had success.
I have tried using OX 10.5.3, but still misbehaves as b4 with OSX.4.11. So its not my mac setup.
I'll try to find the old firmwares as some have described, that might work....????
This seems a common problem to many, I hope that Steve & the Apple engineers have got these messages and are fixing the problem as we speak.
marc

All emails in yahoo somehow disappeared from view. Unaware, I made some change.

My yahoo email was normal until the left vertical page bar came into view. I moved it all the way to left hiding inbox outbox, Trash etc.
Trying to correct this, I inadvertently clicked something unknown
that hid all my emails from view. The emails are still there, I just can't figure out what to do to bring them back visibly to my email page. Computer shows that I made a change, but doesn't tell me what change I made.

Most likely the now missing mail files were not in the PCV archive in the first place (for whatever reason).
I do not use MozBackup, but I believe a user can (or has to) choose what items are to be included in the backup.
You may look at the MozBackup support site for anymore details.
http://mozbackup.jasnapaka.com/support.php
Unless you still find those missing mail files in another backup I'm afraid they are gone.

Why is audio disappearing from Extracted Sound Track File?

I extracted the +Sound Track+ from a .mov file which was originally a .wmv file I'd edited and saved in QT Pro. Regarding the original movie from which I extracted the Sound Track, +Movie Properties+ indicated the +Video track+ as being +Sorenson H.263.+ The Sound Track extracted was +MPEG Layer 3.+
+MovieProperties/Audio Settings+ displayed Sound Track as a Mono audio track.
The extracted sound track appeared in a new QT Window/Player as "Untitled".
I hit play and the audio track played. I saved it as a Self-Contained Movie, hit play and it played again, no problem.
( +Movie Properties+ still displayed the +Sound Track+ Format as MPEG Layer 3/Mono)
I quit QT Pro and turned my attention to other projects in other applications.
Later, when I booted QT Pro and tried to listen to the Extracted Sound Track File, I hit play and the playhead moved, but there was no audible audio, or indication of audio in the equalizer display. It was as if the audio had disappeared. Opening +Movie Properties,+ the +Extracted Sound Track+ still appeared as MPEG layer 3/Mono and the track was still enabled.
On a hunch, I opened and played the original Movie from which I'd extracted the sound track. After that, I hit play again on the Extracted Sound Track Window/Player and voila! -- the audio miraculously reappeared and was fully audible. I don't understand. Why is this happening? I did save the Extracted Sound Track file as a self-contained movie. It doesn't make sense.
More to the point, _how does one extract a sound track and save/process it such that the extracted sound track remains intact with full playback capability, without first having to play the original movie from which it was extracted in order to make the Extracted Sound Track file playback._

Thanks RT...
The curious thing is, if I boot the computer and open the +Extracted Sound Track+ file in Quicktime, it's hit or miss. Sometimes the audio is there. Sometimes it's not. If I however, play ANY other Quicktime Movie on my computer and THEN open the +Extracted Sound Track+ File, the audio miraculously reappears. What can it be?
I've got Streamclip. Haven't used it much but I'll try your approach and export the file back to a Quicktime Format.

Audio disappears from clips after moving them around in between track Premiere

I was working with multiple video clips and movement them around not paying attention to how it was overlapping the audio sometimes. When I finally finished my audio from alot of the clips I cropped have disappeared.
How do I get/link them back?
Videos are Estill there just no sound

I'm guessing you accidentally overlayed some of them while you were working.
A quick way to fix this is to put your playhead (CTI) over a clip you want to add the sound back to, select it, and then press 'f' to match frame back to the original. This will load the original clip with the in and out marks set in your source window and you can drag it down to overlay the clip with the missing audio. This will replace the original clip and audio.

User entered data disappears from view in fields after entry in Reader 9

This is a repost. The form was recreated and same problem (see below) has occurred. The person who has created these forms is a basic user, and so is not changing any settings or doing any programming, just adding fill-in fields (text boxes) and check boxes, then distributing by email through Acrobat. The problem also occurs with other forms. I cannot find any information on this problem anywhere. Any new ideas? File is attached.
A simple form with basic text boxes is created in LiveCycle ES and distributed with Acrobat Pro 9. All users have been upgraded to Acrobat Reader 9. But when the user fills in the form in Reader, the text disappears when they tab or enter into the next field. Check boxes are fine. The user also does not see the data when printing. But, after submission, the data can be seen and printed from Acrobat Pro 9 by the original sender.

This form image was created using a Toshiba MFP and had form fields added with Acrobat. There appears to be a font problem. I saved the form in Acrobat Pro Extended 9. When I opened the form in Reader 9 I was asked to install Japanese fonts since the form uses the KozMinPrN6-Regular font.
After dismissing the install request, the form fields behaved predictibly in Reader 9 (with the exception of requesting 10MB of Japanese fonts).
Steve

Folio has disappeared from Viewer

I'm producing a mag using the latest production tools (previously I was using Drop 10)
Basically, my folio hasn't updated (although it's updated fine through InDesign's Folio Builder) - the updates have not transferred to the Adobe Viewer app even though I'm logged in correctly in Safari / Indesign / Adobe Viewer...
I thought it may have been a problem with the viewer, so I deleted the app and re-installed it - hoping that would cure any hiccups.
Except the folio has disappeared now... (even though I can see the bloody thing perfectly well in the Folio Organizer through Safari...)
Any tips?
Rob

If you used the newest tools, they are not compatible with the viewer version on iTunes. Unfortunately Apple drags their feet when it comes to approving the viewers.
Bob

IDVD 6 - Audio Disappears from video at 49:55 time!?

I hope you can help me out!
I've been working on a DVD that is just over 55 minutes in length.
The single video file is a DV-NTSC QuickTime Movie with chapter markers, as exported from Final Cut Pro 6. I know FCP inside and out, as well as QT, but the iDVD situation is puzzling.
So, all audio plays fine in the FCP timeline, QuickTime movie with chapter markers, and iDVD menu editing area.
The audio abruptly quits at the 49:55 minute mark when a DVD is compressed and burned with iDVD 6. The same happens when I make a Disc Image and play the image with DVD Player-- the audio stops at exactly the same time.
All other iDVD projects work fine!
What are your thoughts on this?
Thanks,
Andrew

Interesting. What is happening at 49:55 in your video? At 55 minutes, you're pretty close to a full disk at max quality -- are your preferences set for Best Quality (1hr+ productions) or Best Performance (<60 min, but depends some on how many menus, menu music, DVD-ROM, etc.). You might try best quality to see if that makes a difference.
John

Built-In Audio disappears from Audio/MIDI

I'm trying to edit a project in Logic (7), get a warning message that my previously used audio device cannot be found, Logic continues to load and finishes at the arrange window as normal. When I go into Audio Prefs in Logic, there are NO sound cards listed to choose from.
Now as to why I'm posting here and not the Logic board: Back into Audio MIDI Setup window, Default Input is grayed out and says "None". Same with "Properties For:" drop-down. The space under Audio Input and Audio Output at the bottom of the window says "Input is not supported" and "Output is not supported".
So then into System Profiler, it DOES list the Audio (Built-In) with a Texas Instruments TAS3004.
I've tried a few reboots and, past that, I really don't even know where to begin. Any thoughts? Thanks in advance!

Hi Cam
Did you try to reset [PRAM|http://support.apple.com/kb/HT1379?viewlocale=en_US] and [PMU|http://support.apple.com/kb/HT1431?viewlocale=en_US]?
Hope that helps P

Audio Disappears from Viewer

Similar Messages

Maybe you are looking for