Audit of success or failure certification services

hello
i have a scenario that i'm using a adcs server and i cannot see any audit of success or failure
i wish to get some more information about how to exposing an events on my server for
certification services auditing
thanks in advanced
morgan

Hey Morgan
Thanks for posting ,
By default the ADCS server on his certification services auditng not configured ,
to be able to see an events You'v must Enable the auditing as the follow below:
after doing changes please update.
I'd be glad to answer any question

Similar Messages

How to check the Success or Failure of a command

Hi,
I have forms 10g in which I made delete button on a tabuler canvas behind the button I wrote DELETE_RECORD buil-In, I want to know how can I make sure the delete process is successful or fail.
Thanks in advance.
Khawar

Hi Francois,
I will check detail in Help for Form Success and Failure, Thanks for reply.
Khawar

Need to send success or failure message to BAPI of SQL query action block

Hi All,
I need to send success or failure message(i.e. 1 or 0) to BAPI which has been called below sql query action block in transaction
Here in SAP, i have created on BAPI with one import parameter and one export parameter.
In the sql query action block, it insert records in the database table. If it fail or success, that message(numeric value 1 or 0) has to send to SAP program through BAPI.
I have created a SAP ABAP program which sends message to MII Message listener through RFC then in the process rule message it will call transaction, in transaction, sql query will insert records into database table. if it success or fail, it will pass to BAPI. And i calling that BAPI in the same SAP ABAP Program to show in the output screen.
Here the issues, i am not getting the value from BAPI which has send by the transaction in MII.
SAP Jco, I have mapped in conf. links --> BAPI input with sql query sucess
Thanks,
Kind Regards,
Praveen Reddy M

Dear All,
I am facing problem regarding completion notifications in Oraclr r12, when user click the upon completion generated notifications it can only be viewd once, second time user cannot view the notifications.
I have find that fnd_file_temp table store this information and deleted it.
Plz help me how to view this URL again.
thanks
regards,
Zubyr

Reporting success or failure of labview command line build

We've set up a nightly build for our project, using a batch file for compiling the C++ code in our project on Windows. Thanks to some other posts on this subject, we've gotten the command-line build to work in Labview 8.2. I'd like to add the Labview build command to same batch file as the C++ build. We found how to check within Labview if the project built or failed; however, I didn't see a way to report the success or failure status of the build from the Labview environment back up into the calling batch file (as/just before Labview exits).
One option is to have the batch file check for the existence of the Labview output executable file(s). Does anyone have a more elegant solution?
Thanks,
Adam

Hello Adam,
Based on what you have described, your method seems to be the simplest way to do it. You can not only check whether the executable files were created, but you can also check to see the modification dates to make sure that they are from the latest build.
body { margin: 0 0 0 0; padding:0 0 0 0 }
td,div { font-family:Arial;font-size:10pt;vertical-align:top }
body { margin: 0 0 0 0; padding:0 0 0 0 }
.transcript { background-color:#d2d2d2; }
.messageBlock { margin-left:4px; margin-bottom:3px }
.message { margin-left:100px; word-wrap:break-word; white-space:-moz-pre-wrap; _white-spacere; }
.messageCont { margin-left:100px; word-wrap:break-word; white-space:-moz-pre-wrap; _white-spacere;}
.other { color:#39577a;vertical-align:top;font-weight:bold;font-style:normal;float:left; width:95px; }
.myself { color:#da8103;font-style:normal;font-weight:bold;font-style:normal;float:left; width:95px; }
.otherCont { font-size:8px;text-align:right; color:#39577a;font-family:Arial,Lucida Grande;font-style:normal;vertical-align:top;font-weight:bold;float:left; width:95px; }
.myselfCont { font-size:8px;text-align:right; color:#da8103;font-family:Arial,Lucida Grande;font-style:normal;vertical-align:top;font-weight:bold;float:left; width:95px; }
.system { margin-left:4px; word-wrap:break-word;color:#da8103;font-style:normal;font-weight:normal; white-space:-moz-pre-wrap; _white-spacere; }
.showTimestamp { margin-right:3px; float:right; color:#999999;font-style:normal;font-weight:normal; }
.other1 { color:#ac2000;vertical-align:top;font-weight:bold;font-style:normal;float:left; width:95px; }
.otherCont1 { font-size:8px;text-align:right; color:#ac2000;font-family:Arial,Lucida Grande;font-style:normal;vertical-align:top;font-weight:bold;float:left; width:95px; }
.other2 { color:#3c9fa8;vertical-align:top;font-weight:bold;font-style:normal;float:left; width:95px; }
.otherCont2 { font-size:8px;text-align:right; color:#3c9fa8;font-family:Arial,Lucida Grande;font-style:normal;vertical-align:top;font-weight:bold;float:left; width:95px; }
.other3 { color:#e25614;vertical-align:top;font-weight:bold;font-style:normal;float:left; width:95px; }
.otherCont3 { font-size:8px;text-align:right; color:#e25614;font-family:Arial,Lucida Grande;font-style:normal;vertical-align:top;font-weight:bold;float:left; width:95px; }
.other4 { color:#0b6ac8;vertical-align:top;font-weight:bold;font-style:normal;float:left; width:95px; }
.otherCont4 { font-size:8px;text-align:right; color:#0b6ac8;font-family:Arial,Lucida Grande;font-style:normal;vertical-align:top;font-weight:bold;float:left; width:95px; }
.other5 { color:#b23290;vertical-align:top;font-weight:bold;font-style:normal;float:left; width:95px; }
.otherCont5 { font-size:8px;text-align:right; color:#b23290;font-family:Arial,Lucida Grande;font-style:normal;vertical-align:top;font-weight:bold;float:left; width:95px; }
.other6 { color:#02e7c7;vertical-align:top;font-weight:bold;font-style:normal;float:left; width:95px; }
.otherCont6 { font-size:8px;text-align:right; color:#02e7c7;font-family:Arial,Lucida Grande;font-style:normal;vertical-align:top;font-weight:bold;float:left; width:95px; }
.other7 { color:#5b3284;vertical-align:top;font-weight:bold;font-style:normal;float:left; width:95px; }
.otherCont7 { font-size:8px;text-align:right; color:#5b3284;font-family:Arial,Lucida Grande;font-style:normal;vertical-align:top;font-weight:bold;float:left; width:95px; }
.tsDisplay { display:block }To check if they exist, you can use the following batch command to check if a file exists:
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
IF EXIST some.txt DOSOMETHING
Good luck!
Kameralina
Ask NI (ni.com/ask)
Search The KnowledgeBase
NI Developer Zone
Measure It. Fix It. ni.com/greenengineering/
NI Vision ni.com/vision/

Success and Failure messages Report

Hi All,
Could you advice if it is possible within SAP XI to generate a report or list of messages with sender party, receiver party and timestamp for reference. Say end of day we need to run a report of how many successful message passed thru XI and the messages that failed. In XI we can see that, but can we generate a report out of automatically at the end of the day, or mail it to a particular e-mail address?
Can I create a spreadsheet report of all the success and failure messages with the time, sender party, receiver party automatically whenever desired.
Thanks in advance
Ravijeet

It is possible. Have a look at this blog have more idea on the table that needs to be used to pick the messages and the details.
[How-to enrich XI monitor's output|How-to enrich XI monitor's output]
Thanks
SaNv...

SSIS Package execution completes without giving any success or failure message

Hi,
We are using SSIS to load some 100k records from flat file to Oracle Destination. We are using Oracle 10g client.
But during the execution after some 5hrs or 6hr with 900k records upload we are getting the message Package execution completed. In the Execution results there is no message related to success or failure and the tasks in the Data Flow where yellow in color. What might be the problem? Any information regarding this case will be helpful for us.
Regards,
Roopa.

Usually you will have a red object somewhere in your package if there was a failure. Make sure you are looking in both the Control Flow and all the Data Flows in the package for a red object. In the execution results in the far right tab, usually you will see several warning messages somewhere in the list of steps, followed by a message that says you have exceded the number of errors for the package and that it is failing. This is not at the bottom but where the errors actually occur in the flow of messages.
I don't know if that helps, but that is about all I can add. Good luck.

A plea to those successfully using Comcast 8Mbs service

I just had a Comcast installer tell me that "their modems don't work with Airport". I've seen quite a few postings here and elsewhere that leads me to believe they're just feeding me a line.
To those of you successfully using Comcast 8Mbs service, could you let me know what model Comcast "cable-modem" you have and what Airport settings were needed to make it work? That way, I can walk the installer through his job.
Thanks!
PowerMac G5, dual 1.8GHz Mac OS X (10.4.6)

Wendel48 wrote:
I am glad all is going well for you, Valetlinksys. For many users the new firmware may be what they needed despite the risks. My only complaint was that I did not have a choice about leaving the old firmware. I would not have purchased this router had Cisco disclosed thier master plan and the intrusive Terms of Usage.
Fortunately the old EA3500 firmware is being worked on by creative minds. I think if you follow the progress those of us who are back on the original (non cloud) firmware may have some nice surprises coming
The router didnt actually work for me the 1st time I access the user interface . Patience is a virtue .. and it worked .. I had problems creating the cisco connect cloud account . After creating an account I encountered problems on my other wireless devices , called tech support . They were able to assist me well with my concern even though I was a lil bit irate already but they were able to manage the issue well .
I was a bit disappointed when it ask me to create an account. They were able to explain it to me how it works and what benefits can I get from it .
I believe that I can make it

Custom success and failure messages on quiz results slide

I'm trying to create a custom success and failure message on the quiz results slide, using certain colours in the text caption to reflect our company's brand. So I've added an advanced action on entering the slide so that if the quiz percentage is 80% or more, the success message shows, and the failure message hides. It seems that this should work, but for some reason, only the failure message displays, regardless of whether I fail or pass. Has anyone else tried this with any success?
Thanks for your help!

I've changed the retake and continue buttons to image buttons, then added my custom success and failure captions which I've named 'fail_f' and 'pass_f':
And here is my advanced action on entering the quiz results slide:
The hide-button, is a white rectangle that I added so that I could place it over the retake button if they passed the quiz successfully.

Quiz Success and Failure Captions

Is it possible to set the length of time a quiz success or
failure caption is displayed for the user? I thought I saw settings
somewhere but for the life of me can't figure out where to do this.
Thanks - Helen

Hi betty's mom
Unfortunately this is the way it has always worked in
Captivate. Actually, version 2 is a step better, as the caption
text is no longer misleading. (In Captivate 1, the text said
Correct/Incorrect - Click to continue, which implied you had to
click directly on the caption in order to proceed.)
If you strongly feel you should have the abiity to have them
simply disappear after a pre-determined period of time, please
submit an Enhancement Request. You may do this by
clicking
here.
Cheers... Rick

Advanced auditing turned on for both success and failure and overide setting enabled, but no failure audits showing.

Just wondering if anyone else has had this issue and found a solution. the policy has been applied
and enforced through the default domain policy. New category success events are showing up, but
no failure audits.

> and enforced through the default domain policy. New category success
> events are showing up, but no failure audits.
Maybe there is no failure event?
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

BODS 3.1 :SMTP configuration to send email for success or failure of job

Hi.
This is further to this post : http://forums.sdn.sap.com/thread.jspa?threadID=1965129&tstart=0
Thanks to all for the help.
I did not find a complete set of information as things to do (for a person who is new to BODS).
Hence sharing the workflow which works for me when tested on a simple workflow :
Pre-requisite : SMTP service to be made available on the BODS server and port 25 to be opened up.
This is done by the IT dept of the company.
When smtp service is activated and port 25 is opened up, telnet IP address 25 should say, service is available.
Suggestion : create a email group like : bods at company.com which can be used to be used for the BODS JOBs. Which does not prompt for a password. This also is done by the IT dept of the company.
1) On the BODS server :
1) Click open Data Services Server Manager
2) SMTP settings for smtp_to functions :
Add the IP Address of the SMTP server
Add the email address of the sender. Eg. bodsjobs at companyname,com
3)Apply/Restart the server.
2) Login to BODS Designer :
Create a test job :
TRY ==>DF===> Script for success ===> CATCH script for failure
In the script for success : add the following :
print (' IN TRY BLOCK Before email ' );
smtp_to('bodsjobs at abc,com', ' SUCCESS OF JOB : '
|| job_name(),'Job completed successfully ', 0, 0);
print('After Email ');
In the script for Catch add the following :
print (' IN CATCH BLOCK Before email ' );
smtp_to('bodsjobs at abc,com', 'FAILURE OF JOB : '
|| job_name(),
error_number( ) || 'Error message: ' || error_message( ) ||
'check details', 50, 50);
print('After Email ');
Note : In the catch : select all exceptions on the check box.
Save all.
Click on the job and say execute.
The job will run and if it is successful. You will receive the succes mail.
If there is any error in the DF before the catch, you will receive a mail, which says failure.
The above workflow, when tested atleast works for me.
Hope this helps.
Regards
indu

Hi Arun.
Am really not aware as to how to make things work from the console.
I work on windows environment both at client and on the server.
It looks like you got a bit confused on suggestion of a email group account.
I never did anything on outlook configuration for activation of smtp for bods.
I think you should not mess with outlook.
I dont know from the client side how things work.
But i have worked directly on the BODS server where the bods installation was done.
It is relatively very simple to do and to test.
But to even test why you get that error.
All you need is just a email id. Which could be yours ???
Put your email id as the source of email in that box in the job server.
And put only your email id in smtp_to and test it.
Run a test job. If it completes successfully. You will receive a mail.
In the catch, if you have checked all the boxes for error capture,
if the job fails, it would throw a dump of the errors in the email.
Once everything works well and you receive emails for any jobs you are running.
Then you could decide for the source of your email id and for the receipients of your emails of the jobs.
You could put a group id of your team as source. And also in smtp_to script in case you want everyone to receive the alert that the job has been done or it has errors.
Or include only those email ids in the smtp_to whom you feel, should receive the mail.
Hope this idea helps.
Please dont mess with outlook for any smtp activation for bods.
It is not required if you are working on a windows environment.
You just need a email id for testing.
Outlook configuration does not come into picture at all.
if there is any other unix environment involved. I have no idea.
And i really do not know how things would be from a client side to configure.
Server configurations i do from the server.
I did all configurations on the main server machine. Not from the client.
And I have only one job server so i did everything there.
I did not do anything from management console.
I use management console only for monitoring of jobs on a daily basis, the dashboard which gives you details of the data pulled, time taken etc etc.
cheers
indu.
Edited by: Indumathy Narayanan on Oct 22, 2011 8:05 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:09 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:17 AM
Edited by: Indumathy Narayanan on Oct 22, 2011 8:18 AM

How to display success message after Remote service call

Hi ,
I am currently using Flex form for adding/updating user
personal details.On submit button click ,i am submitting details to
server by calling RPC remote service.For calling remote service i
am using penneframework. On penneframework, Remote service call
result are populated in RemoteResult object. It dont have any other
event method for handling result event.For errror handling, i have
defaultHandler for displaying error message.
Here i am having two requirements
1. I should be able to track RPC response, so that i can
display success message to user along with DB generated ID.
2. I need to reset all form field after receiving RPC
response.
Here my question is
1.How i can track server response, so that i can display
success or error message.
2. Is their any event or coding technique which i can use for
solving this issue.
Thanks
Kumar

you can do following way :
quote:
var token:AsyncToken =
YourRemoteClass.remoteMethod(param1,param2);
token.addResponder(new AsyncResponder(
function(data:Object, token:Object):void {
// tadaaa response
function(info:Object, token:Object):void {
//ooooo , noo, failure
token

Photoshop elements 12 Installation Failure - Shared Services

Have tried twice to install (second time switching off my virus checker) get a failure to install shared services then it rolls back and uninstalls the programs.
Downloaded Support Advisor - Failed to find any issue.
Opened the "PSE12 STI Installer 12.0 10-26-2013.log.gz" file - gobbledygook to me but no obvious Error Code. Last few lines imply successful installation (copied below)
========================================================================================== ====
Restarting your computer is recommended:
In order to complete the installation, please restart the computer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Call PostSession Custom Hook
Begin cleaning up local media db.
Deleting local media db.
Done cleaning up local media db.
:: END TIMER :: [Total Timer] took 10539.3 milliseconds (10.5393 seconds) DTR = 38730.1 KBPS (37.8224 MBPS)
Uninstalling AAM
AAM Uninstall Status: 0 and 0
Exit Code: 0 - No error.
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
========================================================================================== ======
OS: Windows 7 Home Premium (64bit)
Norton 360
2 month old Lenovo
Help?????????????????? ................
Thanks

Resolved using CHAT with an agent. Seetharam was excellent.
Involved:
NAVIGATING the DVD, opening the PSE 12 folder (If you download then it should be in the Photoshop Elements folder).
RUNNING the ElementsSTIInstaller to install it then
NAVIGATING to "C/Program file (X86)/Common file/Adobe/"
RENAMING the OOBE folder as oldOOBE.
AUTORUNNING the DVD
It is now fully installed....

Reply with Success or Failure in ALSB/OSB

Hi,
What is the difference between Reply with Success and Reply with Failure.
In the error handler of a proxy service I have a "Raise Error" action and after that I have Reply Acton.
Response is the same whether I do reply with success or reply with Failure.
Please help me, when should I use Reply with Success and Reply with Failure and what is the difference between the two.

Reply with Success:
tran:response-code in the response metadata will be set to '0' specifying a successful operation.
In case of HTTP service the HTTP response code will be set to 200
Response will contain contents of $body
Any consumer of the service will see the call as being successfully completed.
In case of JMS transport the JMS Queue or Topic will get an ACK back and message will be removed from the destination.
This is usually used when you are able to properly handle an error and take any alternative actions needed to complete the request.
Reply with Failure:
tran:response-code in the response metadata will be set to '1' specifying a Failed operation.
In case of HTTP service the HTTP response code will be set to 500
Response will contain contents of $body NOT $fault. If you need to send back content of $fault you will have to replace contents of $body with those of $faults before using reply with failure.
Any consumer of the service will see the call as being failed and depending on the error handling in the consumer code error processing will be activated.
In case of JMS transport the JMS Queue or Topic will receive a NACK back but the message will NOT roll back and will be removed from the destination just like in case of Reply with Success. This happens because using a Reply action is considered as an exception being handled properly and a commit will be sent back to the JMS destination. To roll back the message ensure that you use Raise Error instead of a Reply action.
Hope this helps. Please let us know if you have any more doubts.

Display Success Message in Web Service

Hi All,
I Have created web service for function module, when executing web service in navigator its working fine. Here Exception message display in output but success message not display. Success message working in Function Module but not display in Web service. How to display success message in web searvice.
Code used for success message in Function Module:
Message S001(ZMSG).
Thanks,
Chandra

Hello,
Dont think you can use custom message classes in RFC's. Try using a generic message and check if the message is being populated.
Vikranth

Audit of success or failure certification services

Similar Messages

Maybe you are looking for