AUSST fresh synchronization - server not responding ...

Thanks Sumita and Philadendron.
I have tried both fresh and incremental sync at various times of the day up to about 11pm AEST. They have all failed at around the 20 items mark.
As 99.9% of our staff work 8am to 6pm, bandwidth after 6pm is not a problem. As i indicated before, we also have a 10Mb Ethernet over Fibre connection. My firewall (pfsense) graphs the bandwidth in realtime. When I start AUSST, I see the bandwidth reach 10Mb until AUSST fails and the bandwidth use returns to its normal very low level.
I usually have no problems downloading large programs from companies such as Autodesk or Linux (4GB) DVD ISO files from CentOS etc. This is something I usually do during the evening and find the bandwidth available more than adequate.
I think my setup is somewhat different to yours, Philadendron. Here are some details:
Our fibre terminates at a Cisco router (don't recall model) configured as a bridge. This is connected to a dedicated NIC on one our ESX4 hosts. Our firewall is pfSense 2.0.3 running as a VM on the ESX host. Our ESX hosts connect to the LAN through a HP 2810-24G switch. Our ESX hosts are HP DL380G6's with a mix of Intel and Broadcom NICs. I'm not sure which NIC is dedicated to the WAN.
The first machine i tried AUSST on was Windows Server 2003 running as a KVM VM on a CentOS 6.4 (x64) host. This host hardware is an old Dell Poweredge 840. It is connected to the same HP2810 switch as the ESX hosts.
The other machine I have tried is a HP Probook 6560b laptop running Windows 7 Pro x64. It is connected to a small desktop switch in my office. This in turn is connected to LAN switch in the server room. The LAN switch is connected to the HP2810 via 2 x 1Gb aggregated links.
In both cases, the LAN IP of both machines is configured to completely bypass the firewall proxy server (squid). In fact, I have even disabled squid completely to see if this made any difference. It didn't.
There is no bandwidth throttling. In fact, I was wondering if bandwidth throttling might work. Perhaps the adobe update server is getting overwhelmed by the speed of the requests. That doesn't seem plausible but when nothing else seems to be working, I usually start looking at the less plausible options. When I get a chance, I may try AUSST from a regional office using a Telstra ADSL2+ WAN link. These are considerably slower than our 10Mb fibre link. However, I don't really expect any difference.
I also don't want our staff all downloading the updates individually. However, at this stage we only have 4. So it is somewhat easier to manage than 20+!
If I think of anything, I will update this thread. However, I don't believe it is at our end unless something is going on with our service provider (Telstra). This is highly unlikely though.
Regards
Ian.

Similar Messages

Download error server not responding

I keep getting a download error "server not responding correctly" when I try to download creative cloud. I had it on my old system, buy now I've installed a new hard drive and can't get creative cloud downloaded.

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Mail Problems - SMTP server not responding: "offline"

I am currently testing DSL service for a month; set up Mail just before I downloaded the 10.7.3 release. Tested it once and it worked; did not use it to send emails since because I am only testing this (including the email address). I have been receiving emails (which I forwarded to myself from my cable provider's website); today, I wanted to send an email and a 6 hour troubleshooting saga began....
Total of 2 hours with Centurylink tech support; 1 1/2 hours with Applecare, and another 30 minutes with Centurylink.
During that time, all different settings were tried, turned on/off. POP server ok, SMTP server not responding. With Applecare, tried it on both the iMac and the Macbook; also tried it after booting into Snow Leopard - SMTP server not responding ("offline"). Applecare tech stated that it has to be the server since we tried it on two machines as well as SL. Centurylink insists there is nothing wrong with their server, but it's Mail's fault.
So, I finally gave up for the evening, but wonder if there is something amiss with Mail in 10.7.3 (both machines are on the same version) and during the troubleshooting, I noticed an anomaly: in a new message window, there was no choice to choose an account to send from which I thought was odd.
I was thinking of a new install or to clone back? My clones are up to date though, I have no older clones. I do have a fresh install but it's also the latest one from MAS. Or I could just boot from the fresh install and set up Mail to see if it would work?
Grateful for any ideas....

Thanks to everyone; as you can imagine, all settings/configurations were tried yesterday (even booting into SL); Apple said it's Centurylink's fault, and they insisted there was nothing wrong with their server.
FWIW, I unplugged my Comcast cable (it is still active though and I'm getting TV reception, just unplugged the modem for now); right now, my internet access and email account are with Centurylink for the test. I still access my Comcast mail via their web interface email account.
Anyway, thanks to a good friend's idea, I decided to check keychain access and to make it short: the issue is fixed and the problem definitely had something to do with the OS because:
When I first checked keychain, this is what I saw:
I then checked Comcast settings and there were two: one was checked "allow all apps..." and the other had the "confirm" with Mail listed under the applications.
So I figured it's so screwed up, I probably can't make it any worse, so I deleted the Internet Accounts and added Mail to the smtp.centurylink...:
And......... it then worked! These default "internetaccounts" obviously aren't being recognized by Centurylink's server?
And, to make sure that was it, I not only did the same thing on the Macbook, but also booted into a pristine "backup" fresh install (no added apps or files, just default OS), launched Mail and couldn't send. Launched Keychain, changed the apps to Mail, and I was able to send email.
I would call that a bug? Or not? In any case, I'll be calling back Applecare and tell them to add the above to the very long log from yesterday and to make a note that "internetaccounts" doesn't work with everything.

Could not download application Illustrator a Flash builder. Server write "Server not responding try again later" - 5 day

Have a nice day
I can not download Adobe Illustrator cc 2014 and Update for the Admin Console to create an installation package. Also not download Flash Builder Premium. On both writes System Server not responding try again later and it takes five days. You can fix the error?
thank you

Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Problem with premiere and encore export, Adobe QT32 Server (Not Responding)

I could help.
When exporting to Encore or Premiere, the program block.
In the Activity Monitor shows me these two errors:
Adobe QT32 Server (Not Responding)
PPro Headless (Not Responding)
Technical Specifications:
MAC OS X 10.9.5
Adobe Suite CS6
graphics card: AJA KONA LHi
Can you help me please
Thank You

Have you checked out this post from Adobe? I know it says for After Effects but it definitely applies to Premiere too. We have some AJA cards whose components in /library/QuickTime were causing similar Adobe QT32 server hangups; removing them solved our issue but also broke compatibility with older apps like FCP 7.

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

ACC Setup Error - Remote Server not Responding in the Proper Manner - Windows 7 Pro

Hello -
I was able to install the CC upgrades to all my software on my laptop without issue. Whenever I try to upgrade them on my desktop I recieve the attached error. I am running Windows 7 Professional. My guess this is being caused my my company's firewall however my IT director claims he set me up to bypass the firewall when trying to install this.
Thank you for your help.

Hi Mike603,
Please refer to the following help document on error " Remote Server not responding".
http://helpx.adobe.com/creative-suite/kb/remote-server-responding-installing-aam.html
Hope this helps.
Please let me know in case of any problem.
Regards,
Sumit Singh

TS4006 Phone deactivated - My iphone 5 has on its' own de-activated itself. It requires my apple id and password to re-activate. Upon this command, I press next, to which it says: server not responding. Rendering my phone useless...please help

Iphone de-activated itself - it won't accept the ID and password as it says: server not responding, rendering the phone useless...please help

i'm in the same situation. waiting for an answer.

Exchange Server not responding - please try later

Hi there
Can anyone please help with my E75.
I have had the phone over a year and since day 1 it has syncd perfectly well with my Outlook at work.
Until a couple of days ago!!!
Since then, it has refused to sync my calendar and contacts. It is still syncing e mail but about half way through the syncing process (once it has synced the e mails) I get the error message “exchange server not responding – please try later”.
I have asked my work IT helpdesk but they have said speak to the mobile provider. They also said there’s nothing wrong with their servers but I got the feeling they hadn’t really checked.
My problem is that I don’t know where to start.
Is the problem to do with:-
My phone?
Its settings?
Orange’s servers?
My work’s servers?
Nokia’s servers?
I’m confused – please help.
Ps I can’t believe it is my phone's settings as I haven’t changed these and it worked fine for a year. And, anyway, my credentials must be ok because it is still syncing my e mails.
Thanks in advance
Ian

hi
as i am still facing this problem also from couple of day one of my customers was complaining about yahoo messenger version 9 couldnt sign in after i make good troubleshooting i fond a massage in yahoo site and the massage is '
Yahoo! Search Search:
Welcome, ksatcw[Sign Out, My Account]
Messenger Home -
Help
Go Back to Yahoo! Messenger
Yahoo! Messenger > Yahoo! Messenger > Messenger9 > Messenger
Is my Use Proxies Enable HTTP Proxy setting the reason why I cant sign into the Yahoo! Messenger Beta?
Yes. If your connection to the internet requires proxy authentication, then you won't be able to sign in with the current version of Yahoo! Messenger Beta. Instead, we recommend using Messenger version 8.1 for now. Sorry for the inconvenience! And thanks for reaching out early for the Beta. Well get this resolved as soon as possible.
Email this page Print this page
Was this article helpful?
Yes
No
Contact Customer Care Click to contact Customer Care for further assistance.
Top Questions
Questions about the closure of Yahoo! Messenger version 5.6?
Why do I need to upgrade to Yahoo! Messenger 9.0 if I have a firewall?
How do I install Yahoo! Messenger?
How do I configure my firewall/proxy server?
Yahoo! Messenger crashes when I launch it.
but if i disable my proxy the working fine without any problem and what i think is yahoo service the change some settings which not compatible with proxy settings or server .

Mail server not responding. Need help how to verify my account

Mail server not responding. Need help how to verify my account

There are instructions on this page for how to create a new account without giving credit card details (the instructions won't work with existing accounts) : http://support.apple.com/kb/HT2534
Unless an account is created via those instructions then credit card details will need to be entered on it before the account can be used.

Mail server not responding, have checked details in mail settings, i pkone 4s

Mail server not responding, have checked my details, help

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this: Delete the account in Mail and then set it up again.
 Cheers, Tom

The server not responding

Frequently, the server not responding at the logins of the users. It's not hanging but not responding. All the Oracle services is running and the Event Viewer not record any error or warning. I need to know if there are someone Oracle log where I can check this. Thanks.

That could be a hardware problem with the WiFi antenna. Contact Apple Support for assistance: Contact Us

7410 NFS server not responding

Greetings,
Anyone seeing "NFS server ... not responding" from a client of a 7410?
I have a 7410 with a single J4400 (22 1TB drives @ RAID1, 1 spare, 1 logzilla). It's running 2009.09.01.3.0,1-1.8, which I believe is the latest and greatest. There is one client, a T2000 running Solaris 10. We're using NFS v3 to mount four shares from the 7410. Mount options look like this:
box-nge2:/export/oracle/data - /oradata/data nfs - yes rw,bg,hard,nointr,rsize=32768,wsize=32768,proto=tcp,vers=3,noac,forcedirectioA fairly large (~1TB) Oracle database lives here (although there was very little activity in the database when the following occurred).
Today I was cleaning up some old data files from a now unused Oracle instance. Pretty simple: rm -rf /oradata/data/DO-NOT-WANT/ . I was surprised to see the command appear to hang, and the "NFS server kwaltz-nge2 not responding still trying" message appear. Control-C eventually got me my prompt back.
When the system became responsive again a few minutes later I tried deleting files one at a time. Deleting some "large" data files (i.e 200GB or more) was taking more than 2 minutes, and caused the NFS server not responding message. Smaller files would take a few seconds.
Why is a simple "rm" command bringing the 7410 to its knees? Any thoughts? Thanks.
Edited by: roymcmorran on Dec 23, 2009 3:44 PM

After some update issues, we also lost NFS. I created a test share and exported it to one of our Solaris 10 hosts. I got an rpcbind failure. This failure wasn't corrected by restarting the NFS service, nor rebooting the 7410. Rather, I had to DISABLE the NFS service, then re-enable it. After that, all connectivity returned.
Charles

Unable to connect, server not responding

Hello,
We've resurrected a machine running 10.4.x from the dead back into use but it isn't happy with our network. It is configured correctly as far as I can tell. It responds to pings, can browse websites, and can mount other drives; however, when I try to mount the 10.4.x machine's drive from another machine I get the following:
"Unable to connect - server not responding." Which I know is completely untrue after testing ping.
I only entered the ip address in the Go > Connect to Server dialog. When attempting to connect from another machine I see a little more output:
"The finder cannot complete the operation because some data in "afp://10.0.1.7" could not be read or written. (Error code -36)"
I am lost here, any help or observations are highly appreciated.

Hi kssi89, and a warm welcome to the forums!
Well, in pure Apple File System talk... -36 ioErr I/O error (bummers)
Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
http://fuzzy.wordpress.com/2006/12/10/ioerror-36/
But, in this instance I think it's not even starting to.
Assuming Personal File Sharing is on on that machine & Internet Sharing is OFF, I might try trashing these, reboot and set it up again...
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist

With 3g, I keep getting "server not responding" on my iPad2...what do I do?

at home, where I do not have WIFI, I have been unsuccessful for the last day to get an internet connection via 3G. Getting emails is not a problem, but when I try to access the internet, all I get is "server not responding".....do I contact ATT or is there something else I can try? This problem appeared out of the blue.

If you have a very slow 3 g signal, or worse, a signal so bad that it falls back to 2 g or edge, many servers will time out before you can get the data. There are some apps that will let you test your connection speed, such as speed test.
If you are in a real congested area, or wayyyy out in the sticks, this may be the problem. A good way to test is to goto a known good signal area, like a starbucks, join their wifi, and see if the pages work. Then leave the wifi, but in a known good 3 g area, see if the it is better.

AUSST fresh synchronization - server not responding ...

Similar Messages

Maybe you are looking for