Authenticate/Authorize a proxy user in Workflow.

Are there any methods to Authenticating a Proxy User in Workflow. I am running some workflow in the anonymous user context. In that context i do not have the privileges run for example the password generator. It works fine when i am an enduser or admin. I would like to use a proxy user so that the password generator will work. Any idea on how to proceed with this in workflow.
Thanks

Hi donjosh, were you able to solve this issue?
Is there a way to change context from anonymous context to end user context?
I'm authenticating users with siteminder and I want to automatically create users that don't exists in IDM running a process as anonymous user and then redirecting to the end user interface, how this can be done??
thanks,

Similar Messages

Have OAM authenticate/authorize users against diff dir servers

Hi folks,
Is there a way to have OAM authenticate/authorize users against diff dir server under single OAM instance?
We have standalone OAM 10_1_4_3_0 w OHS11g installed on linux and connected to a particular directory server (sun ldap). We also have an OAM-protected app which authenticate/authorizes users against the same dir server. Can we somehow configure rules/policies/etc, so that users accessing app B will be authenticated/authorized against dir server B; users accessing app C will be authenticated/authorized against dir server c; etc, without having multiple OAM instances?
Any help is greatly appreciated
Thank you, Roman

OVD will not be able to figure out what directory servers its getting authenticated to. OVD is a virtual directory server which can talk to different data sources and fetch a match according to the request.
For instance, if OVD is configured to AD, SunOne LDAP, OID and Oracle DB. When you call OVD for authentication, it will make a call to all the data sources (AD/OID/LDAP/DB) and gets a match and provides to OAM. If you have 2 Auth modules one with Sun LDAP and other with Oracle DB, OVD will not remember to which data source it should make a call. All it does is dynamically makes calls to all the configured data source and gets a matching results.
To tell you in more detail - Consider App A is configured to authenticate against SunOne LDAP and App B is configured to get authenticate against Oracle DB. When user tries to login to App A; OAM makes a call to OVD and OVD [OVD don't have capability of maintaining the info of users and where they reside] will make a call to both SunOne LDAP and Oracle DB and when SunOne returns a matching record, OVD sends the authentication info to OAM.
For better results, try to maintain the same set of schema across all your data sources.

[OIM] Proxy User with groups

Dear people,
I have a scenario where there is a resource with an approval workflow, with 2 steps: in the first the Manager of the requester is the one who must approve. In the second step, a group is assigned as the one who has to make the approve.
I give a proxy to the Manager and another proxy to one of the group members.
When the workflow reaches the Manager approval step, it is automatically assigned to the proxy (what I expected).
The problem arises when the workflow reaches the group approval step, the assignment is still made to the user that is member of the group, not to his proxy user. Is this an OIM limitation? Some workaround?
Thanks!

Hi,
when we assign the task to a group then if the proxy user is the part of that particular group then he has that task automatically why to duplicate the task and if proxy user is not the memeber of the group then he is not authorize to have that task because he is not the member of that group. As user set him as proxy user for him not for group.
I hope this answer your query....
Regards
Alabhya Goel

A network error when i tested the connection of a proxy user

Good evening
I 'd created a 3 appliances Filer system . Filer 1.1.0.653
The Filr Apl is in DMZ and every ports are open between it and the 2 Windows boxes (AD and File Sharing)
Every thing seems well. I could inport AD users, create filr users, and work ...
But when i want to create a NetFolder server, impossible to pass the connection test
Name : Cn=Administrateur, cn=Users,dc=arcdom,dc=arcane-inf,dc=com (Administrateur because i'm French :=)
or
Name : Administrateur
or
Name = arcdom\Administrateur
Click on test connection => an network error occurs
I'd try with a "Filr" ADuser with same ACL as Administrateur, same ...
The Novell-FAMT is running. (I tried to restart it without succes)
Help .......
LP Irovetz

Originally Posted by LPIROVETZ
Good evening
I 'd created a 3 appliances Filer system . Filer 1.1.0.653
The Filr Apl is in DMZ and every ports are open between it and the 2 Windows boxes (AD and File Sharing)
Every thing seems well. I could inport AD users, create filr users, and work ...
But when i want to create a NetFolder server, impossible to pass the connection test
Name : Cn=Administrateur, cn=Users,dc=arcdom,dc=arcane-inf,dc=com (Administrateur because i'm French :=)
or
Name : Administrateur
or
Name = arcdom\Administrateur
Click on test connection => an network error occurs
I'd try with a "Filr" ADuser with same ACL as Administrateur, same ...
The Novell-FAMT is running. (I tried to restart it without succes)
Help .......
LP Irovetz
From the docu:
Click the Authentication tab, then specify the following information:
Proxy name and password: Specify the fully qualified, comma-delimited name and password for the proxy user used to access the OES, NetWare or Windows, server. (You can use the Browse icon next to the Proxy field to browse the LDAP directory for the proxy user that you want to use.)
IMPORTANT:Before you specify a proxy name and password for the Net Folder server, ensure that you review the information in Section 8.1.2, Planning the Net Folder Server Proxy User.
Test connection: Click this button to ensure that the path is accurate and that the credentials are valid, then click OK after the test succeeds.
Sometimes proxy users with the incorrect context pass this test. Ensure that the context for your proxy user is correct, as described in Expected Name Format for File Servers.
Authentication type: Select the authentication service for the file server that you are connecting to. This option corresponds with the Server type setting that you selected on the Configuration tab. If you selected OES or NetWare as the server type, only Novell NMAS is available as the authentication type. If you selected Windows as the server type, you can select either Kerberos, NTLM, or Auto detect as the authentication type. (Auto detect means that it tries authenticating with Kerberos first, and if that fails, authenticates with NTLM.)
NOTE:If Kerberos is selected as the authentication type, ensure that the DNS name server is able to resolve DNS queries for the Active Directory domains.
If the Kerberos port (port 88) is disabled on the Windows server, select NTLM as the authentication type.
So you should use comma delimited name for the username... Did you also try browsing for the user using the icon there?
Does is log any specific error message in /opt/novell/filr/apache-tomcat/logs/appserver.log file when you try to test the connection?
Thomas

Using Proxy User Authentication in Sql Developer

Hi!
Is it possible to use proxy user authentication in SQL Developer? I'm thinking that if I'm clever enough, I can craft a custom jdbc URL that will allow my users to proxy authenticate into my Oracle 10gR2 database while using SQL Developer.
Unfortunately, I'm not feeling all that clever. ;)
Can anybody help me out here? Is it even in the realm of possibility?
Thanks!
Kevin Ferlazzo
DBA
VA Department of Juvenile Justice

I found the possibility that proxy authentication of both accounts can be enforced:
SQL> alter user appuser grant connect through personaluser AUTHENTICATION REQUIRED;
I guess that this is the motivation for implementing the 2-session proxy connection method in SQL Developer.
Regards,
Martin

How do I run a scheduled task as a specific user (proxy user)

I am a little stumped here.
We have some Taskdefinition that we can schedule so they run every N minutes or once a day and so forth... works fine...
How can I set which user it is supposed to run as?
I dont want it to run as me or any of the other admins, I wan tit to run as a specific proxy user so that it is easy to see which task that did what changes to a user or resource.
I know that the reconcilliations and active syncs can use a proxy account, and I noticed that I can change a tasks user by editing it in debug after it is scheduled.
But I would like to add it in the taskdefinition itself, trying to find info on how to do that....
either I am missing it in the manuals or I am blind...
/dhurgan

1. WARNING: This procedure is for advanced users only. Some third-party software may not work as expected, or may not work at all, if the home folder is moved.
2. Back up all data.
3. Copy your home folder to the desired location, which must be on a volume of type "Mac OS Extended (Journaled)" with file ownership enabled, as shown in the Finder Info dialog. Encryption is optional. The volume must be on a local storage device, not on the network, and it must be mounted automatically at startup — before any user logs in. A disk image will not work.
The name of your home folder is your short user name. Do not rename it. Do not copy the "Users" folder.
5. Select
 ▹ System Preferences ▹ Users & Groups
Click the lock icon and authenticate. Right-click or control-click your name in the account list, and select Advanced options from the popup menu. In the sheet that opens, change the location of the home directory. Log out and log back in.
6. Test. If you have problems, reverse the above steps. If you got this far, you should have no trouble doing that. If everything works as you expect, delete the original home folder.

Necessary Roles/authorizations required to Userid for workflow assignment.

Hi all,
Am working on a Custom workflow assignment.
This is the first time, customer is working on workflows in this system.
Henceforth, we need to do basic setup/configuration, before starting actual work.
I want to know, what all Roles/authorizations are required for my userid throughout the assignment.
Currently, we have got,
EXX_BC_SAP_ALL_RESTRICTED :: All authorization without basis
SAP_BC_BMT_WFM_ADMIN::Administrator for Business Workflow
SAP_BC_BMT_WFM_DEVELOPER::Developer for Business Workflow
SAP_SWFMOD_ADMIN::Workflow Modeler Administrator
Are these sufficient or do we need any other roles?
With above authorizations, i am unable to access below mentioned t-codes,
SWNCONFIG                     Extended notifications for business workflow
SWU3                             Automatic Workflow Customizing
SWWCOND_INSERT     Schedule background job for work item deadline monitoring
SWWCLEAR_INSERT     Schedule background job for clearing tasks
Pls let me know the role, i need to get for above t-codes.
Kindly go thru your SU01 t-code & let me know what all roles are used in your workflow system.
cheers.
santosh.

Hi,
I recommend you to have roles related to SWLD tcode (SAP menu Workflow). The basis must know what are the exact names.
These are some roles:
SAP_BC_BMT_WFM_ADMIN                    --> Administrator for Business Workflow
SAP_BC_BMT_WFM_CONTROLLER         --> Process Controller for Business Workflow
SAP_BC_BMT_WFM_DEVELOPER                --> Developer for Business Workflow
SAP_BC_BMT_WFM_GP_ADMIN                --> Role for Guided Procedure Business Workflow Administrators
SAP_BC_BMT_WFM_GP_SERVICE_USER -->Service User for Guided Procedures Business Workflow API
SAP_BC_BMT_WFM_PROCESS              --> Business Workflow Implementation Team
SAP_BC_BMT_WFM_UWL_ADMIN              --> UWL: Administrator for Workflow Functionality
SAP_BC_BMT_WFM_UWL_END_USER         --> UWL: End User for Workflow Functionality
SAP_SWFMOD_ADMIN                              --> Workflow Modeler Administrator
SAP_SWFMOD_TRANSPORT                         --> Access to transport manager
SAP_SWFMOD_USER                              --> Workflow Modeler Administrator
SAP_WF_ADMINISTRATION                         --> Business Workflow: Work for administrator
SAP_WF_CONTROLLER                              --> Business Workflow:Work for process controller
SAP_WF_EVERYONE                              --> Business Workflow: Work for Everyone
SAP_WF_IMPLEMENTATION                         --> Business Workflow: Work for Implementation Team
Regards,

How we can acess GOS to pop up automatically to user from workflow is our a

we plan to implement invoice verification workflow to start when an invoice is scanned and placed in holder in OAWD. So that workflow will start from then onwards with SAP archive link.
Please let us know how we can link scanner and SAP Archive link so that we can place the scanned document directly in to OAWD. how we open the image automatically when approver or AP clerk execute the workitem.
The process we want to follow is
1. Scan document and place in OAWD
2 Workflow is started based on the document type of Archive link( we want to use BKPF)
3 AP clerk receives workitem and execute it. APclerk see the transaction code FV60 to enter document and image of the scan automatically
4 AP clerk fill the document and park the document.
5 Workitem is sent to approver based on the rule specified
6 Approver execute the transaction invoice iamge is opened and sap document is displayed.
7 Approver check both image and sap docuemnt and take decision
8 Approver approves document , sap document is posted and ready for payment
9 If rejected go back to AP clerk.
Here issue is when user or approver execute the workitem ,how we can open image automatically along with sap screen.
or how we can acess GOS to pop up automatically to user from workflow is our another isssue

Hi,
It is possible to launch the stored image as soon as workitem is executed. You will need to maintain the archivelink customization to display stored document. Check the following link
[Displaying Stored Document|http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/993685446d11d189700000e8322d00/content.htm]
Hope this helps
Cheers!!!
Samanjay

OSB db-adapter: how to pass a proxy user or something like this?

Hello, on OSB with a Oracle db-adapter, I'd like to do some database updates. Usually the db-adapter is set up with a technical database user.
But on database side, this way I don't know exactly which user has been updating my table because only the technical user will be inserted into "Created_by" Column
(select USER from dual ==> technical user).
Now I thougt about using Proxy Users. But there exists some other Problems:
- every proxy user has to be initially created in the database
- how can I pass proxy user and technical user from OSB to the database?
(using JCA, JNDI and JDBC Data Sources)
... on JDBC datasources I can only specify hard coded userid/password (--> technical user)
Any help would be appreciated. Maybe some good white papers or tutorial exists in the web, but I can't finde a good one.
Thanks
Best regards

You can pass in the adapter header property "jca.db.ProxyUserName". That way you can specify a user for each invoke.
I got confirmation that OSB supports setting these properties. The sample adapters-db-201-MovieImages on soasamples.samplecode.oracle.com > Adapters shows working with header properties but with Mediator.
Thanks
Steve

Proxy User - Forms 11.1.2 and Oracle Database (version 10.1.0.5) ??

Hi,
we are migrating from Forms 6i to 11.1.2. Our database version is very old (Enterprise Edition, version 10.1.0.5) because this is the latest version of the DB that Forms 6i runs, and we will migrating to 11g in phases. So 6i and 11g will co-exists for a while (accesing the same DB).
I am trying to use proxy users feature to login to database.
So I did this:
- I created a user PROXY_USR to be the proxy user:
SQL> create user PROXY_USR identified by PROXY_PASW;*
- I grant create session for the user:
SQL> grant create session to PROXY_USR;*
- I changed the application users (eg APPUSER01), to connect via proxy user:
SQL> alter user APPUSER01 grant connect through PROXY_USR;*
The comand in Forms module to login is:
+LOGON('PROXY_USR[APPUSER01]','PROXY_PASW@DB01');+*
The logon built is being performed and the connection being made, without erros.
But when I verify in what user the application is logged on, the result is not
what was expected:
I did the follwing PL/SQL inside Form module:
begin*
select user into v_user_DB from dual;*
MESSAGE('User Connected: '||v_user_DB,ACKNOWLEDGE);*
exception*
when others then*
MESSAGE('ERR: '||SQLERRM,ACKNOWLEDGE);*
end;*
The result from this select, is PROXY_USR and not APPUSER01 (that would be the correct):
*>>Result: "User Connected: PROXY_USR"*
Some more commands that were also performed inside Forms module:
begin+
select sys_context('userenv','current_user') v_current_usr from dual+
MESSAGE('Current User: '||v_current_usr,ACKNOWLEDGE);+
exception+
when others then+
MESSAGE('ERR: '||SQLERRM,ACKNOWLEDGE);+
*>>Result: "User Connected: PROXY_USR"*
begin+
select sys_context('userenv','proxy_user') v_proxy_user from dual;+
MESSAGE('Current User: '||v_proxy_user,ACKNOWLEDGE);+
exception+
when others then+
MESSAGE('ERR: '||SQLERRM,ACKNOWLEDGE);+
*>>Result: "Proxy User: "*
OBS: when a connect via SQL*Plus, in a 11g database (Express), and run the commands above, the results are OK. The
APPUSER01 is returned.
Any ideas ?? I will open a SR in Metalink, but I think they will first request a database upgrade,
which is not feasible for us at the moment ...
Thanks in Advance.
Franco

Unfortunately besides trying on a certified combination (maybe use the Developer Database VM and import the required schemas for trial) and going through the documentation at http://docs.oracle.com/cd/E24269_01/doc.11120/e24477/sso.htm I can't offer more. I don't have a 10gR1 database anymore and also I don't have OID to play with.
cheers

How do i set the proxy user in FF 3.6.13, this entry was existing earlier its gone now. using IE with entries in user account pwds works while FF doesn't.

How do i set the proxy user in FF 3.6.13.
previous versions had an entry for proxy user.
its gone now.
using IE with entries in user account pwds works while FF doesn't.
too bad have to change back to IE :-(

You can find the connection settings in Tools > Options > Advanced : Network : Connection
See "Firefox connection settings":
*[[Firefox cannot load websites but other programs can]]

Error when connect proxy user

i using ODP.NET connect to oracle database with proxy user, when i connect with a password not correct then i can't again connect with password correct after.
string[] cs = new string[2];
cs[0] = "Data Source=orcl;User Id=user1;Password=pass1;"+
"Proxy User Id=proxyuser;Proxy Password=pass;Pooling=true";
cs[1] = "Data Source=orcl;User Id=user1;Password=pass2;"+
"Proxy User Id=proxyuser;Proxy Password=pass;Pooling=true";
using (OracleConnection oc = new OracleConnection(cs[0]))
try
oc.Open();
catch (OracleException ex)
oc.Close();
using (OracleConnection oc = new OracleConnection(cs[1]))
try
oc.Open();
catch (OracleException ex)
oc.Close();
using (OracleConnection oc = new OracleConnection(cs[0]))
try
oc.Open();
catch (OracleException ex)
oc.Close();
Part 3: always wrong. it can't open
Please help me.
Message was edited by:
bvnhan

Hi,
I tested the following and got the expected results (doenst connect). I'm using 10.2.0.2 ODP, and got the same behavior pointing to 9206 db and 10.2.0.2 db.
I did a quick check and dont see any obvious related bug fixes in ODP, but if you're not using 10.2.0.2 ODP, you might want to try that.
Here's exactly what I tested.
Cheers
Greg
CODE
==========================
drop user proxyacct cascade;
drop user puser1 cascade;
create user proxyacct identified by pass;
create user puser1 identified by pass;
grant connect, resource to proxyacct;
grant create session to puser1;
ALTER USER puser1 GRANT CONNECT THROUGH proxyacct AUTHENTICATED USING PASSWORD;
using System;
using System.Data;
using Oracle.DataAccess.Client;
public class testproxy
public static void Main()
string goodstring ="data source=orcl;user id=puser1;password=pass;proxy user id=proxyacct;proxy password=pass";
string badstring = "data source=orcl;user id=puser1;password=;proxy user id=proxyacct;proxy password=pass";
using (OracleConnection oc = new OracleConnection(goodstring))
try
     oc.Open();
     Console.WriteLine("con1 connected");
catch (OracleException ex)
     Console.WriteLine("exception caught1 " + ex.Message);
using (OracleConnection oc = new OracleConnection(badstring))
try
     oc.Open();
     Console.WriteLine("con2 connected");
catch (OracleException ex)
     Console.WriteLine("exception caught2 " + ex.Message);
     // still need this to work around the problem
     // of next connection getting the same error this one did
     OracleConnection.ClearPool(oc);
using (OracleConnection oc = new OracleConnection(goodstring))
try
     oc.Open();
     Console.WriteLine("con3 connected");
catch (OracleException ex)
     Console.WriteLine("exception caught3 " + ex.Message);
MY OUTPUT
===============================
con1 connected
exception caught2 ORA-28183: proper authentication not provided by proxy
con3 connected

Authentication and authorization for AD users in UCM11g

Hi all
we are using webcenter content server 11g. I read some where that for 11g users authentication is done in weblogic server environment, mean content server for 11g in now managed by weblogic server only, am i right?. we have successfully integrated Active Directory with weblogic sever and user of AD are able to log-in UCM but they don't have any role like contributor or Admin. How to do this role mapping for AD user in UCM i.e. authorization for these users. Please provide any guidence on this issue any doc or blog, we are new to webcenter suite.
Thanks
Somesh

As you already have weblogic integrated with AD, remains only role mapping and Single Sign-On integration. For authorization, AD must contain groups with exact names as roles in the Content Server. Those groups should be where Group Base parameter in the weblogic ActiveDirectoryAuthenticator point (like OU=Roles,OU=Oracle,DC=example,DC=com). Assigning AD user to the AD group named contributor, will add contributor role to logged Content Server user.
As for SSO, refer to the:
http://docs.oracle.com/cd/E23943_01/web.1111/e13707/sso.htm
and
http://docs.oracle.com/cd/E23943_01/doc.1111/e10792/c05_security.htm#autoId21
Procedure steps are:
Create a user account for the hostname of the web server machine in Active Directory
Create krb5.ini file, and locate it in the C:\Windows directory at both machines (Domain Controller and WLS host)
Generate the keytab file
Create a JAAS Login File named krb5Login.conf
Put both keytab and krb5Login.conf files to …/user_domains/domains/my_domain/
Configure the Identity Assertion Provider
Adjust Weblogic Server startup arguments for Kerberos authentication
Redeploy CS (and optionally other servers) server with the documentation given deployment plan
Check web browser configuration (IE and Firefox only)
Take a deep breath and test
If successful have a cake and cup of coffee else goto step one
Regards,
Boris

How to pass Proxy user dynamically in Toplink proxy authentication?

Hi,
I'm using Toplink Proxy Authentication with my ADF JSF application and want to pass the Proxy user dynamically to the preLogin(..) method of mySessionEventListener (Currently proxy user is hard coded).
This is to make my application user as the Proxy user.
I have tried to do this in two ways:
1) In my Login screen Backing Bean, I retrieve the session as
session = sessionFactory.acquireSession(); and set the application user in it as
session.setProperty("proxyUser1", inputText1.getValue());
But,
session.getProperty("proxyUser1") returns null in the preLogin(..) method
2) I add a loginUser property to the mySessionEventListener class and create a constructor to set it.
Then I call the constructor from my Login Backing Bean as
mySessionEventListener eventMgr = new mySessionEventListener(<proxy_user>);
session.getEventManager().addListener( eventMgr );
But, the loginUser property seeems to be transient and does not retain value when retrieved in preLogin(..) method.
Please indicate if anything is wrong. Also, is there any other way to get this done?
Thanks in advance.
Vikas

Hi Vikas,
Probably your sessions.xml defines a ServerSession, and acquireSession method returns a ClientSession. ServerSession is the object that connects to the database, it may have any number of ClientSessions associated with it - all of them use connections provided by ServerSession's connection pools.
So if you'd like to alter the serverSession before login, acquireSession is too late - it triggers login of the ServerSession and returns a ClientSession.
To get the ServerSession before login:
// the first param indicates that the session shouldn't be connected
Session serverSession = sessionFactory.getSharedSession(false, false);Now you have a serverSession on which login hasn't been called yet.
You can set the property into the session, or directly into its login.
In fact you may choose to do whatever you wanted to do in preLogin right here - in this case no preLogin event would be required of course.
Finally to get a ClientSession, call the same api did:
// the first param indicates that the session shouldn't be connected
Session clientSession = sessionFactory.getSession();On the first such call the ServerSession will be connected.
Note that because all the ClientSessions will connect through the connections provided by the same ServerSession they will all use proxyUser1.
If you are interested in using different proxy users for different ClientSessions http://www.oracle.com/technology/products/ias/toplink/doc/1013/main/_html/dblgcfg008.htm#BABDABCF lists several scenarios for that.
Andrei

Url link in User Decision workflow step

Hi Experts,
I had created a workflow for "Employee transfer" process using SWDD tcode.
I had a created a workflow step with type as "User Decision".I had included "Approve" & "Reject" decision options.
Now i want to include URL link along with "Approve" & "Reject" in the user decision workflow step (i.e) The manager needs to see the URL link along with "Approve" & "Reject" in his SAP workflow inbox.
Can anyone guide me...
Regards,
Krishna Balaji T

Hi Krishna,
I understand your issue. I have faced a similar issue in my project.
Here is the solution!
To add link of a URL you need to have the binding with the BO of the transaction your are refering to. To do this, you need to bind your BO event (triggering event) to the workflow container and then the workflow container to task container. This BO value should flow from event-> workflow -> task container to get the link in the User Decision.
To do the binding you need to follow the following steps:
1. Go to t-code SWDD and open your workflow template.
2. Go to Basic Data (cap sign button at the top of the screen) or click Ctrl + F8
3. Go to Start Events tab.
4. In the Object type enter your BO name (BO for the transaction you need to add as link), in Event of object enter the BO event. This would serve as the triggering event for your workflow.
5. Click on 'B' i.e. Binding Defined, click on generate automatic binding. It would automatically generate the appropriate binding for the workflow. You can also alter the binding as per requirement. This binding would ensure that the URL comes under 'objects and attachments' section.
6. Click on 'C' i.e. Start Condition. A dialog would open, select the appropriate start condition for the workflow. Check the condition before saving (recommended).
6. Click on 'A' to Activate the binding and start condition. All 'A', 'B' and 'C' would get green.
7. Save the changes made and activate your workflow.
8. Do the binding between the workflow and the user decision step. Select automatic binding (recommended).
You can also refer to the similar thread that I had provided solution to. This would help you resolve the issue!
Re: URL of site has to be attached along with the mail
Hope this helps!
Regards,
Saumya

Authenticate/Authorize a proxy user in Workflow.

Similar Messages

Maybe you are looking for