Authentication failed. Cannot get kdc for realm
There is something missing from the log file that I need to see. When a user logs in you should see what was submitted in the std.out (since you have enabled JDK tracing with debug=true in the bsclogin.conf)
"Cannot get kdc for realm ECM-INC.COM"
Without seeing the entire error message it seems that java cannot communicate with the KDC you have defined under the ECM-INC.COM realm (this would be the suspect KDC ECM-ADC.ECM-INC.COM) can you ping it? is it a domain controller?, is the global catalog enabled?
run the set command from a DOS window and try replacing that ECM-ADC part with the value in the logon server (all CAPS).
Also verify the problem exists by typing BOinstall\javasdk\bin\kinit username
Regards,
Tim
Hi Tim,
I am getting the following error, I have a case in with SAP but have not recieved a response. I noticed that you are an SAP employee, is it possible to get you involved with my case? Either way below is the error I'm getting.
C:\Program Files (x86)\Business Objects\javasdk\bin>kinit.exe CHI\biadauth
Password for CHI\[email protected]:######
Exception: krb_error 6 Client not found in Kerberos database (6) Client not foun
d in Kerberos database
KrbException: Client not found in Kerberos database (6)
at sun.security.krb5.KrbAsRep.<init>(KrbAsRep.java:66)
at sun.security.krb5.KrbAsReq.getReply(KrbAsReq.java:486)
at sun.security.krb5.KrbAsReq.getReply(KrbAsReq.java:444)
at sun.security.krb5.internal.tools.Kinit.sendASRequest(Kinit.java:310)
at sun.security.krb5.internal.tools.Kinit.<init>(Kinit.java:239)
at sun.security.krb5.internal.tools.Kinit.main(Kinit.java:106)
Caused by: KrbException: Identifier doesn't match expected value (906)
at sun.security.krb5.internal.KDCRep.init(KDCRep.java:133)
at sun.security.krb5.internal.ASRep.init(ASRep.java:58)
at sun.security.krb5.internal.ASRep.<init>(ASRep.java:53)
at sun.security.krb5.KrbAsRep.<init>(KrbAsRep.java:50)
... 5 more
A little bit of background on this. We use a single lable domain with multiple forest and multiple domains in those forest. I realize that the kinit.exe tool only test a single domain so I picked out only one domain to test with but I still get the error above. Any thoughts?
Thanks,
Tammy
Similar Messages
-
Cannot get kdc Krb_0 error
Hi,
I am getting this error with below krb5.ini file, i am not able understand what can be the problem ?
Regards,
Jasmi
[libdefaults]
default_realm = DOMAIN.ORG
dns_lookup_kdc = true
dns_lookup_realm = true
[realms]
DOMAIN.ORG = {
kdc = HOSTNAME.DOMAIN.ORG
default_domain = DOMAIN.ORGAlso this is complete error i get :
Exception: krb_error 0 Cannot get kdc for realm domain.org No error
KrbException: Cannot get kdc for realm domain.org
at sun.security.krb5.KrbKdcReq.send(KrbKdcReq.java:133)
at sun.security.krb5.KrbKdcReq.send(KrbKdcReq.java:106)
at sun.security.krb5.internal.tools.Kinit.sendASRequest(Kinit.java:300)
at sun.security.krb5.internal.tools.Kinit.<init>(Kinit.java:239)
at sun.security.krb5.internal.tools.Kinit.main(Kinit.java:106) -
BO XI 3.1 : Active Directory Authentication failed to get the Active Directory groups
Dear all
In our environment, there are 2 domain (domain A and B); it works well all the time. Today, all the user belong to domain A are not logi n; for user in domain B, all of them can log in but BO server response is very slowly. and there is error message popup when opening Webi report for domain B user. Below are the error message:
" Active Directory Authentication failed to get the Active Directory groups for the account with ID:XXXX; pls make sure this account is valid and belongs to an accessible domain"
Anyone has encountered similar issue?
BO version: BO XI 3.1 SP5
Authenticate: Windows AD
Thanks and RegardsPlease get in touch with your AD team and verify if there are any changes applied to the domain controller and there are no network issues.
Also since this is a multi domain, make sure you have 2 way transitive forest trust as mentioned in SAP Note : 1323391 and FQDN for Directory servers are maintained in registry as per 1199995
http://service.sap.com/sap/support/notes/1323391
http://service.sap.com/sap/support/notes/1199995
-Ambarish- -
I cannot get Icloud for windows update 4.0.2 to install on my Win 8.1 PC
I cannot get Icloud for windows update 4.0.2 to install on my Win 8.1 Pro PC its an AMD 64 bit processor.
I get a message that saysI cannot get Icloud for windows update 4.0.2 to install on my Win 8.1 Pro PC
I get the update notification and authorize its installation and it try's but fails.
I have down loaded the update and tried installation manually but it doesn't work.
I get the following message after it fails:
Errors occurred while installing the updates. If the problem persists, choose Tools > Dowmnload only and try installing manually.
I have tried this many times to no availI have been getting the same message for a few days now. Apple must have an a bug in this update
-
OSD: pxe boot fails with "failed to get infromation for MP:/"
Hi,
We face an issue on pxe boot. It boots into pxe then tries to apply network settings but then reboots.
Ipconfig is ok, smsts.log says "failed to get information for MP:/oursccmserver.
Troubleshooting:
*PXE is working fine when client as well as sccm-server are in same subnet, it fails when in different subnets.
*Firewall is fully opened, no connections blocked.
*Ping to sccm-server works fine on dns
Please advise.
J.
smsts.log:
Missing root CA environment variable from variables file TSPxe 26/03/2014 16:37:11 288 (0x0120)
Support Unknown Machines: 0 TSPxe 26/03/2014 16:37:11 288 (0x0120)
Custom hook from X:\\TSConfig.INI is TSPxe 26/03/2014 16:37:11 288 (0x0120)
No hook is found to be executed before downloading policy TSPxe 26/03/2014 16:37:11 288 (0x0120)
Authenticator from the environment is empty. TSPxe 26/03/2014 16:37:11 288 (0x0120)
Need to create Authenticator Info using PFX TSPxe 26/03/2014 16:37:11 288 (0x0120)
Initialized CStringStream object with string: {40AB3050-A926-4BA5-9D17-7423F93CBCD5};2014-03-27T00:37:11Z. TSPxe 26/03/2014 16:37:11 288 (0x0120)
Set media certificate in transport TSPxe 26/03/2014 16:37:11 288 (0x0120)
Set authenticator in transport TSPxe 26/03/2014 16:37:11 288 (0x0120)
CLibSMSMessageWinHttpTransport::Send: URL: oursccmserver.ourcompany.com:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA TSPxe 26/03/2014 16:37:11 288 (0x0120)
[TSMESSAGING] AsyncCallback(): ----------------------------------------------------------------- TSPxe 26/03/2014 16:37:11 288 (0x0120)
[TSMESSAGING] AsyncCallback(): WINHTTP_CALLBACK_STATUS_SECURE_FAILURE Encountered TSPxe 26/03/2014 16:37:11 288 (0x0120)
[TSMESSAGING] : dwStatusInformationLength is 4
TSPxe 26/03/2014 16:37:11 288 (0x0120)
[TSMESSAGING] : *lpvStatusInformation is 0x8
TSPxe 26/03/2014 16:37:11 288 (0x0120)
[TSMESSAGING] : WINHTTP_CALLBACK_STATUS_FLAG_INVALID_CA is set
TSPxe 26/03/2014 16:37:11 288 (0x0120)
[TSMESSAGING] AsyncCallback(): ----------------------------------------------------------------- TSPxe 26/03/2014 16:37:11 288 (0x0120)
WinHttpReceiveResponse (hRequest, NULL), HRESULT=80072f8f (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8927) TSPxe 26/03/2014 16:37:11 288 (0x0120)
failed to receive response with winhttp; 80072f8f TSPxe 26/03/2014 16:37:11 288 (0x0120)
m_pHttpTransport->Send (0, 0, pServerReply, nReplySize), HRESULT=80072f8f (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,5159) TSPxe 26/03/2014 16:37:11 288 (0x0120)
MPKeyInformation.RequestMPKeyInformationForMedia(szTrustedRootKey), HRESULT=80072f8f (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,9410) TSPxe 26/03/2014 16:37:11 288 (0x0120)
Failed to get information for MP: http://oursccmserver.ourcompany.com. 80072f8f. TSPxe 26/03/2014 16:37:11 288 (0x0120)
Jan HoedtHi,
Have you check Mpcontrol.log on the MP server and Smspxe.log?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Slmodem/wvdial: cannot get information for serial port
Hi,
I have the following problem when trying to set up my Intel WinModem with arch:
After configuring wvdial I get an error when trying to launch it
/dev/ttySL0: Cannot get information for serial port
Does anybody know about this problem? There is absolutely no information about it on the internet.
Thanks for any help!!!!!Hi,
I have the following problem when trying to set up my Intel WinModem with arch:
After configuring wvdial I get an error when trying to launch it
/dev/ttySL0: Cannot get information for serial port
Does anybody know about this problem? There is absolutely no information about it on the internet.
Thanks for any help!!!!! -
I want to change my Apple ID for IPad because forgot password and all email addresses changed so cannot get informations for password reset. What can I do?
I was wondering if you ever figured this out. I have the same issue. When I try to use the support communities, there are so many with the same problems and never seem to be any replys?? Not very helpful and I can not get Apple to return my emails.
-
Failed to get procs for sound track -2126
What is the meaning of the error message of "Failed to get procs for sound track -2126"? I am attempting to convert a Quicktime movie file that uses Sorenson Video & QDesign Music 2 codecs.
Certainly someone must know the meaning for this error message. Is there a list of error messages for compressor and QT??
-
Failed to get pprocs for sound track -2126
What is the meaning of the error message of "Failed to get procs for sound track -2126"? I am attempting to convert a Quicktime movie file that uses Sorenson Video & QDesign Music 2 codecs.
You've got to give us a little bit more to go on.
What, exactly, are you doing? Converting your Sorenson Video 3-codec QT file in Compressor? What version of Compressor? What happens if you try this same thing in QT Pro? -
Cannot get workspace for compartment
Hi
I'd created a track in CE EHP2.
While creating any of the project from NWDS, i'm getting erorr
Cannot get workspace for compartment abc_DEMOCE2_1
Exception getting workspace by URL:Internal problem. See trace for details
The exception was caught in the attached stack.
com.sap.ide.dii05.util.api.log.Stacktrace
at com.sap.ide.dii05.util.api.log.LogManager.internalCreateCaughtStatus(LogManager.java:326)
at com.sap.ide.dii05.util.api.log.LogManager.createCaughtStatus(LogManager.java:297)
at com.sap.ide.dii05.lib.internal.util.DtrLegacyUtil$1.doInWorkerThread(DtrLegacyUtil.java:146)
at com.sap.ide.dii05.util.api.job.JdiJob$1.doInWorkerThread(JdiJob.java:77)
at com.sap.ide.dii05.util.internal.job.InternalJdiJob$3.run(InternalJdiJob.java:215)
at com.sap.ide.dii05.util.internal.job.BusyBackgroundIndicator.showWhile(BusyBackgroundIndicator.java:74)
at com.sap.ide.dii05.util.internal.job.InternalJdiJob.internalRun(InternalJdiJob.java:189)
at com.sap.ide.dii05.util.internal.job.InternalDiiJob.runInternal(InternalDiiJob.java:306)
at com.sap.ide.dii05.util.internal.job.InternalDiiJob.runR(InternalDiiJob.java:204)
at com.sap.ide.dii05.util.internal.job.InternalDiiJob.run(InternalDiiJob.java:192)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Please share some pointers on this.
Thanks
PuneetHello,
please take care about the description letters of the track. If you use special character you cannot import the track in nwds. (i.e. no "ü", "ä" ...)
Cheers -
CDSSO Invalid Agent: Could not get agent for realm
Hi,
This post follows on from a previous post (http://forum.java.sun.com/thread.jspa?threadID=5276012) but describes a subsequent problem.
I'm getting the following error in my amCDC log. I believe it is related to the post (http://forum.java.sun.com/thread.jspa?threadID=5162908&messageID=9623898)
03/18/2008 10:17:58:826 AM GMT: Thread[httpSSLWorkerThread-443-0,10,Grizzly]
CDCServlet.doGetPost: Query String received: goto=http%3A%2F%2Fbonecrusher.test.local%3A80%2F%3FsunwMethod%3DGET&RequestID=20798&MajorVersion=1&MinorVersion=0&ProviderID=http%3A%2F%2Fbonecrusher.test.local%3A80%2Famagent&IssueInstant=2008-03-18T10%3A18%3A09Z
03/18/2008 10:17:58:826 AM GMT: Thread[httpSSLWorkerThread-443-0,10,Grizzly]
SSOException caught: com.iplanet.sso.SSOException: Invalid session ID.
03/18/2008 10:17:59:091 AM GMT: Thread[httpSSLWorkerThread-443-0,10,Grizzly]
Forwarding for authentication to: /UI/Login?goto=%2Famserver%2Fcdcservlet%3FTARGET%3Dhttp%253A%252F%252Fbonecrusher.test.local%253A80%252F%253FsunwMethod%253DGET%26RequestID%3D20798%26MajorVersion%3D1%26MinorVersion%3D0%26ProviderID%3Dhttp%253A%252F%252Fbonecrusher.test.local%253A80%252Famagent%26IssueInstant%3D2008-03-18T10%253A18%253A09Z
03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
CDCServlet.doGetPost: Query String received: TARGET=http%3A%2F%2Fbonecrusher.test.local%3A80%2F%3FsunwMethod%3DGET&RequestID=20798&MajorVersion=1&MinorVersion=0&ProviderID=http%3A%2F%2Fbonecrusher.test.local%3A80%2Famagent&IssueInstant=2008-03-18T10%3A18%3A09Z
03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
WARNING: Advice List is : null
03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
CDCServlet.doGetPost: targetURL = http://bonecrusher.test.local:80/?sunwMethod=GET
03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
CDCServlet.doGetPost: gotoURL = http://bonecrusher.test.local:80/?sunwMethod=GET
03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
CDC Servlet: Directory matches for http://bonecrusher.test.local:80/ is:{AMIdentity object: id=TestCDSSOAgent,ou=agent,dc=test-sun,dc=local={objectclass=[person, inetorgperson, organizationalperson, inetuser, top], sunIdentityServerDeviceKeyValue=[agentRootURL=http://bonecrusher.test.local:80/, agentRootURL=http://bonecrusher.test.local/], sunIdentityServerDeviceStatus=[Active], userpassword=[Q8Ea8sKa1CMyUaxgkqhC0PVeKV8=]}}
03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
CDC Servlet: Restriction string for: http://bonecrusher.test.local:80/ is: id=TestCDSSOAgent,ou=agent,dc=test-sun,dc=local [bonecrusher.test.local, bonecrusher.test.local]
03/18/2008 10:18:04:482 AM GMT: Thread[httpSSLWorkerThread-443-2,10,Grizzly]
ERROR: CDCServlet.doGetPost:Exception occured
java.lang.Exception: Invalid Agent: Could not get agent for the realm
at com.iplanet.services.cdc.LdapSPValidator.validateAndGetRestriction(LdapSPValidator.java:200)
at com.iplanet.services.cdc.CDCServlet.redirectWithAuthNResponse(CDCServlet.java:303)
at com.iplanet.services.cdc.CDCServlet.doGetPost(CDCServlet.java:262)
at com.iplanet.services.cdc.CDCServlet.doGet(CDCServlet.java:208)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:718)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
Based on the previous post I believe it has something to do with the validity checks performed by the CDC. The post describes 3 checks and I believe my solution is failing one of these, however I am not sure which.
As far as I understand it my logs above demonstrate that the agentRootURL is correctly set, but I'm not sure what other values are needed.
Any advice would be greatly received.
RQuick follow up :)
This problem was caused by the Access Manager instance not being able to resolve the IP address for 'bonecrusher.test.local'
After I added the entry for this into the hosts file everything worked.
R -
802.1x port authentication failing after getting a access-accept packet
Hi all,
Im not 100% sure what the hell is going on here.
Any idea's or help will be appreciated.
Heres the topology.
1 x windows 2012 NPS
1x 3750X
1x Windows 7 x64
data flow
<laptop> - - [gi 1/0/13]<3750X>[gi 1/0/48]- -[gi 5/39]<6513>[po 1] - - [po 4]<6509><5/1> - - <VMWARE>[NPS Server]
The switch that is doing the authentication is the 3750X. Here is the IOS version.
Switch Ports Model SW Version SW Image
* 1 54 WS-C3750X-48 15.2(1)E C3750E-UNIVERSALK9-M
A wireshark trace on the NPS server shows that the packets are arriving and being sent back
Wireshark on a mirror of the trunk port connecting the 6513. It also shows packets being sent and arriving. access-accept packets are being recieved.
As you can see in the debug output, the switch is getting a access-accept, then it is stating a AAA failure.
here is a debug output as you plug in the laptop.
Oct 24 10:53:44.653: dot1x-ev:[Gi1/0/13] Interface state changed to DOWN
Oct 24 10:53:44.653: dot1x-ev:[Gi1/0/13] No DOT1X subblock found for port down
Oct 24 10:53:45.643: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to down
Oct 24 10:53:46.641: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to down
Oct 24 10:53:47.538: dot1x-ev:[Gi1/0/13] Interface state changed to UP
Oct 24 10:53:47.564: dot1x-packet:[6431.500e.9b00, Gi1/0/13] queuing an EAPOL pkt on Auth Q
Oct 24 10:53:47.572: dot1x-ev:DOT1X Supplicant not enabled on GigabitEthernet1/0/13
Oct 24 10:53:47.572: dot1x-packet:EAPOL pak rx - Ver: 0x1 type: 0x1
Oct 24 10:53:47.572: dot1x-packet: length: 0x0000
Oct 24 10:53:47.572: dot1x-ev:[Gi1/0/13] Dequeued pkt: Int Gi1/0/13 CODE= 0,TYPE= 0,LEN= 0
Oct 24 10:53:47.572: dot1x-ev:[Gi1/0/13] Received pkt saddr =6431.500e.9b00 , daddr = 0180.c200.0003, pae-ether-type = 888e.0101.0000
Oct 24 10:53:47.572: dot1x-ev:[Gi1/0/13] Couldn't find the supplicant in the list
Oct 24 10:53:47.572: dot1x-ev:[6431.500e.9b00, Gi1/0/13] New client detected, sending session start event for 6431.500e.9b00
Oct 24 10:53:47.572: AAA/BIND(00000047): Bind i/f
Oct 24 10:53:47.580: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Sending create new context event to EAP for 0x15000045 (6431.500e.9b00)
Oct 24 10:53:47.580: EAP-EVENT: Received context create from LL (Dot1x-Authenticator) (0x15000045)
Oct 24 10:53:47.580: EAP-AUTH-EVENT: Received AAA ID 0x00000047 from LL
Oct 24 10:53:47.580: EAP-AUTH-AAA-EVENT: Assigning AAA ID 0x00000047
Oct 24 10:53:47.580: EAP-AUTH-AAA-EVENT: CTS not enabled on interface Gi1/0/13
Oct 24 10:53:47.580: EAP-AUTH-EVENT: Received Session ID "C0A846660000004700DF6030" from LL
Oct 24 10:53:47.580: EAP-AUTH-EVENT: Setting authentication mode: Passthrough
Oct 24 10:53:47.580: eap_authen : initial state eap_auth_initialize has enter
Oct 24 10:53:47.580: EAP-EVENT: Allocated new EAP context (handle = 0xE8000047)
Oct 24 10:53:47.580: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Created a client entry (0x15000045)
Oct 24 10:53:47.580: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Dot1x authentication started for 0x15000045 (6431.500e.9b00)
Oct 24 10:53:47.580: %AUTHMGR-5-START: Starting 'dot1x' for client (6431.500e.9b00) on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
Oct 24 10:53:47.580: EAP-EVENT: Received EAP event 'EAP_AUTHENTICATOR_START' on handle 0xE8000047
Oct 24 10:53:47.580: eap_authen : during state eap_auth_initialize, got event 25(eapStartTmo)
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_initialize -> eap_auth_select_action
Oct 24 10:53:47.580: eap_authen : during state eap_auth_select_action, got event 20(eapDecisionPropose)
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_select_action -> eap_auth_propose_method
Oct 24 10:53:47.580: eap_authen : idle during state eap_auth_propose_method
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_propose_method -> eap_auth_method_request
Oct 24 10:53:47.580: eap_authen : idle during state eap_auth_method_request
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_method_request -> eap_auth_tx_packet
Oct 24 10:53:47.580: EAP-AUTH-EVENT: Current method = Identity
Oct 24 10:53:47.580: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_CUSTOMIZE_ID_REQUEST' on handle 0xE8000047
Oct 24 10:53:47.580: eap_authen : idle during state eap_auth_tx_packet
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_tx_packet -> eap_auth_idle
Oct 24 10:53:47.589: EAP-AUTH-TX-PAK: Code:REQUEST ID:0x1 Length:0x0005 Type:IDENTITY
Oct 24 10:53:47.589: EAP-EVENT: Started 'Authenticator ReqId Retransmit' timer (30s) for EAP sesion handle 0xE8000047
Oct 24 10:53:47.589: EAP-EVENT: Started EAP tick timer
Oct 24 10:53:47.589: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_TX_PACKET' on handle 0xE8000047
Oct 24 10:53:47.597: dot1x-ev:[Gi1/0/13] Sending EAPOL packet to group PAE address
Oct 24 10:53:47.597: dot1x-ev:[Gi1/0/13] Sending out EAPOL packet
Oct 24 10:53:47.597: dot1x-packet:EAPOL pak Tx - Ver: 0x3 type: 0x0
Oct 24 10:53:47.597: dot1x-packet: length: 0x0005
Oct 24 10:53:47.597: dot1x-packet:EAP code: 0x1 id: 0x1 length: 0x0005
Oct 24 10:53:47.597: dot1x-packet: type: 0x1
Oct 24 10:53:47.597: dot1x-packet:[6431.500e.9b00, Gi1/0/13] EAPOL packet sent to client 0x15000045
Oct 24 10:53:47.606: dot1x-packet:[6431.500e.9b00, Gi1/0/13] Queuing an EAPOL pkt on Authenticator Q
Oct 24 10:53:47.606: dot1x-packet:EAPOL pak rx - Ver: 0x1 type: 0x0
Oct 24 10:53:47.606: dot1x-packet: length: 0x001F
Oct 24 10:53:47.606: dot1x-ev:[Gi1/0/13] Dequeued pkt: Int Gi1/0/13 CODE= 2,TYPE= 1,LEN= 31
Oct 24 10:53:47.606: dot1x-ev:[Gi1/0/13] Received pkt saddr =6431.500e.9b00 , daddr = 0180.c200.0003, pae-ether-type = 888e.0100.001f
Oct 24 10:53:47.606: dot1x-packet:EAPOL pak rx - Ver: 0x1 type: 0x0
Oct 24 10:53:47.606: dot1x-packet: length: 0x001F
Oct 24 10:53:47.606: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Response sent to the server from 0x15000045
Oct 24 10:53:47.606: EAP-EVENT: Received LL (Dot1x-Authenticator) event 'EAP_RX_PACKET' on handle 0xE8000047
Oct 24 10:53:47.606: EAP-AUTH-RX-PAK: Code:RESPONSE ID:0x1 Length:0x001F Type:IDENTITY
Oct 24 10:53:47.606: Payload: 47454E4552414C5C72616E64792E636F ...
Oct 24 10:53:47.606: eap_authen : during state eap_auth_idle, got event 1(eapRxPacket)
Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_idle -> eap_auth_received
Oct 24 10:53:47.606: EAP-AUTH-EVENT: EAP Response received by context 0xE8000047
Oct 24 10:53:47.606: EAP-AUTH-EVENT: EAP Response type = Identity
Oct 24 10:53:47.606: EAP-EVENT: Stopping 'Authenticator ReqId Retransmit' timer for EAP sesion handle 0xE8000047
Oct 24 10:53:47.606: eap_authen : during state eap_auth_received, got event 10(eapMethodData)
Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_received -> eap_auth_method_response
Oct 24 10:53:47.606: EAP-AUTH-EVENT: Received peer identity: GENERAL\randy.coburn.admin
Oct 24 10:53:47.606: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_IDENTITY' on handle 0xE8000047
Oct 24 10:53:47.606: eap_authen : during state eap_auth_method_response, got event 13(eapMethodEnd)
Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_method_response -> eap_auth_select_action
Oct 24 10:53:47.606: eap_authen : during state eap_auth_select_action, got event 19(eapDecisionPass)
Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_select_action -> eap_auth_passthru_init
Oct 24 10:53:47.606: eap_authen : during state eap_auth_passthru_init, got event 22(eapPthruIdentity)
Oct 24 10:53:47.614: @@@ eap_authen : eap_auth_passthru_init -> eap_auth_aaa_req
Oct 24 10:53:47.614: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_GET_PEER_MAC_ADDRESS' on handle 0xE8000047
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Adding Audit-Session-ID "C0A846660000004700DF6030" to RADIUS Req
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Added Audit-Session-ID
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Adding IDB "0x070B90F8" to RADIUS Req
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Added IDB
Oct 24 10:53:47.614: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_CUSTOMIZE_AAA_REQUEST' on handle 0xE8000047
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: eap_auth_aaa_authen_request_shim aaa_service 19, eap aaa_list handle 0, mlist handle 0
Oct 24 10:53:47.614: AAA/AUTHEN/8021X (00000000): Pick method list 'default'
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Request sent successfully
Oct 24 10:53:47.614: eap_authen : during state eap_auth_aaa_req, got event 24(eapAAAReqOk)
Oct 24 10:53:47.614: @@@ eap_authen : eap_auth_aaa_req -> eap_auth_aaa_idle
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000):Orig. component type = Invalid
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute hwidb
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute aaa-authen-type
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute aaa-authen-service
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute clid-mac-addr
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute target-scope
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute aaa-unique-id
Oct 24 10:53:47.614: RADIUS(00000000): Config NAS IP: 0.0.0.0
Oct 24 10:53:47.614: RADIUS(00000000): sending
Oct 24 10:53:47.614: RADIUS/ENCODE: Best Local IP-Address 192.168.70.102 for Radius-Server 192.168.19.121
Oct 24 10:53:47.614: RADIUS(00000000): Send Access-Request to 192.168.19.121:1645 id 1645/21, len 288
Oct 24 10:53:47.614: RADIUS: authenticator F1 BA E5 31 71 54 BF 1A - A2 B1 5E 1A 63 72 1E 72
Oct 24 10:53:47.614: RADIUS: User-Name [1] 28 "GENERAL\randy.coburn.admin"
Oct 24 10:53:47.614: RADIUS: Service-Type [6] 6 Framed [2]
Oct 24 10:53:47.614: RADIUS: Vendor, Cisco [26] 27
Oct 24 10:53:47.614: RADIUS: Cisco AVpair [1] 21 "service-type=Framed"
Oct 24 10:53:47.614: RADIUS: Framed-MTU [12] 6 1500
Oct 24 10:53:47.614: RADIUS: Called-Station-Id [30] 19 "AC-F2-C5-75-7D-0D"
Oct 24 10:53:47.614: RADIUS: Calling-Station-Id [31] 19 "64-31-50-0E-9B-00"
Oct 24 10:53:47.614: RADIUS: EAP-Message [79] 33
Oct 24 10:53:47.614: RADIUS: 02 01 00 1F 01 47 45 4E 45 52 41 4C 5C 72 61 6E 64 79 2E 63 6F [GENERAL\randy.co]
Oct 24 10:53:47.622: RADIUS: 62 75 72 6E 2E 61 64 6D 69 6E [ burn.admin]
Oct 24 10:53:47.622: RADIUS: Message-Authenticato[80] 18
Oct 24 10:53:47.622: RADIUS: EE 52 4D ED B9 06 F3 CE 63 AC 9D 73 24 1B A7 ED [ RMcs$]
Oct 24 10:53:47.622: RADIUS: EAP-Key-Name [102] 2 *
Oct 24 10:53:47.622: RADIUS: Vendor, Cisco [26] 49
Oct 24 10:53:47.622: RADIUS: Cisco AVpair [1] 43 "audit-session-id=C0A846660000004700DF6030"
Oct 24 10:53:47.622: RADIUS: Vendor, Cisco [26] 20
Oct 24 10:53:47.622: RADIUS: Cisco AVpair [1] 14 "method=dot1x"
Oct 24 10:53:47.622: RADIUS: NAS-IP-Address [4] 6 192.168.70.102
Oct 24 10:53:47.622: RADIUS: NAS-Port [5] 6 60000
Oct 24 10:53:47.622: RADIUS: NAS-Port-Id [87] 23 "GigabitEthernet1/0/13"
Oct 24 10:53:47.622: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
Oct 24 10:53:47.622: RADIUS(00000000): Sending a IPv4 Radius Packet
Oct 24 10:53:47.622: RADIUS(00000000): Started 10 sec timeout
Oct 24 10:53:47.622: RADIUS: Received from id 1645/21 192.168.19.121:1645, Access-Accept, len 66
Oct 24 10:53:47.622: RADIUS: authenticator 92 F6 07 AF C1 AB 0B 4C - 1D 9E A0 D1 01 36 27 26
Oct 24 10:53:47.622: RADIUS: Class [25] 46
Oct 24 10:53:47.622: RADIUS: 76 E3 06 66 00 00 01 37 00 01 02 00 C0 A8 13 79 00 00 00 00 00 00 00 00 00 00 00 00 01 CE CF F8 1F 7B 75 41 00 00 00 00 00 00 00 50 [ vf7y{uAP]
Oct 24 10:53:47.622: RADIUS(00000000): Received from id 1645/21
Oct 24 10:53:47.622: EAP-EVENT: eap_aaa_reply
Oct 24 10:53:47.622: EAP-AUTH-AAA-EVENT: Reply received session_label 72000033
Oct 24 10:53:47.622: EAP-EVENT: Received AAA event 'EAP_AAA_FAIL' on handle 0xE8000047
Oct 24 10:53:47.622: eap_authen : during state eap_auth_aaa_idle, got event 8(eapAAAFail)
Oct 24 10:53:47.622: @@@ eap_authen : eap_auth_aaa_idle -> eap_auth_failure
Oct 24 10:53:47.631: EAP-EVENT: Received get canned status from lower layer (0xE8000047)
Oct 24 10:53:47.631: EAP-AUTH-TX-PAK: Code:FAILURE ID:0x1 Length:0x0004
Oct 24 10:53:47.631: EAP-AUTH-EVENT: FAIL for EAP method ID: 1, name: , on handle 0xE8000047
Oct 24 10:53:47.631: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_FAIL' on handle 0xE8000047
Oct 24 10:53:47.631: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Received an EAP Fail
Oct 24 10:53:47.639: %DOT1X-5-FAIL: Authentication failed for client (6431.500e.9b00) on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
Oct 24 10:53:47.639: dot1x-packet:[6431.500e.9b00, Gi1/0/13] Added username in dot1x
Oct 24 10:53:47.639: dot1x-packet:[6431.500e.9b00, Gi1/0/13] Dot1x did not receive any key data
Oct 24 10:53:47.639: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Processing client delete for hdl 0x15000045 sent by Auth Mgr
Oct 24 10:53:47.639: dot1x-ev:[6431.500e.9b00, Gi1/0/13] 6431.500e.9b00: sending canned failure due to method termination
Oct 24 10:53:47.639: EAP-EVENT: Received get canned status from lower layer (0xE8000047)
Oct 24 10:53:47.639: dot1x-ev:[Gi1/0/13] Sending EAPOL packet to group PAE address
Oct 24 10:53:47.639: dot1x-ev:[Gi1/0/13] Sending out EAPOL packet
Oct 24 10:53:47.639: dot1x-packet:EAPOL pak Tx - Ver: 0x3 type: 0x0
Oct 24 10:53:47.639: dot1x-packet: length: 0x0004
Oct 24 10:53:47.639: dot1x-packet:EAP code: 0x4 id: 0x1 length: 0x0004
Oct 24 10:53:47.639: dot1x-packet:[6431.500e.9b00, Gi1/0/13] EAPOL canned status packet sent to client 0x15000045
Oct 24 10:53:47.639: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Deleting client 0x15000045 (6431.500e.9b00)
Oct 24 10:53:47.639: %AUTHMGR-7-STOPPING: Stopping 'dot1x' for client 6431.500e.9b00 on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
Oct 24 10:53:47.639: %AUTHMGR-5-FAIL: Authorization failed or unapplied for client (6431.500e.9b00) on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
Oct 24 10:53:47.648: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Delete auth client (0x15000045) message
Oct 24 10:53:47.648: EAP-EVENT: Received free context (0xE8000047) from LL (Dot1x-Authenticator)
Oct 24 10:53:47.648: dot1x-ev:Auth client ctx destroyed
Oct 24 10:53:47.648: EAP-EVENT: Received LL (Dot1x-Authenticator) event 'EAP_DELETE' on handle 0xE8000047
Oct 24 10:53:47.648: EAP-AUTH-EVENT: Freed EAP auth context
Oct 24 10:53:47.648: EAP-EVENT: Freed EAP context
Oct 24 10:53:48.621: EAP-EVENT: Stopped EAP tick timer
Oct 24 10:53:49.485: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to up
Oct 24 10:53:50.491: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to up
Oct 24 10:53:53.528: dot1x-ev:[Gi1/0/13] Interface state changed to DOWN
Oct 24 10:53:53.528: dot1x-ev:[Gi1/0/13] No DOT1X subblock found for port down
Oct 24 10:53:54.518: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to down
Oct 24 10:53:55.524: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to downHi Jatin,
See below the data that you have requested.
show run bits.
aaa new-model
aaa authentication dot1x default group radius
aaa session-id common
clock timezone BST 0 0
clock summer-time UTC recurring last Sun Mar 1:00 last Sun Oct 2:00
dot1x system-auth-control
interface GigabitEthernet1/0/13
switchport access vlan 80
switchport mode access
authentication port-control auto
dot1x pae authenticator
spanning-tree portfast
interface GigabitEthernet1/0/48
switchport trunk encapsulation dot1q
switchport trunk native vlan 70
switchport mode trunk
radius server NPS1
address ipv4 192.168.19.121 auth-port 1645 acct-port 1646
timeout 10
key thesecret
ip default-gateway 192.168.70.1
SW1-randy#show auth sessions interface gig 1/0/13
Interface MAC Address Method Domain Status Fg Session ID
Gi1/0/13 803f.5d09.189e N/A UNKNOWN Unauth C0A846660000002F00251DBC
SW1-randy#Show mac address-table Interface GigabitEthernet1/0/13
Mac Address Table
Vlan Mac Address Type Ports
80 803f.5d09.189e DYNAMIC Drop
SW1-randy#ping 192.168.19.121
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.19.121, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/8 ms
Here is a wireshark of the accept packet.
Message was edited by: randy coburn
Added wireshark trace -
Cannot Get Mail for more than 5 accounts at a time
I have a total of 9 POP email accounts setup in Mail. The problem is that my dedicated server doesn't allow for more than 5 simultaneous send/receives per IP (which unfortunately cannot be changed). When I click on "Get Mail", I see it tries to get mail for all accounts at once, and I need to somehow change that within Mail. Ideally I need it to check accounts individually or, as you can do in Entourage, group it into send/receive schedules with 4 per group.
I am desperate, someone please help!If App Store has an app that can make, e.g., zip archives of multiple photos, then it could help (you package a bunch of photos in a zip file, and then you send only one attachment; the zip file).
Disclaimer: I don't know the App Store apps nor the iPhone SDK well enough to know if such an app exists or if it is even possible. -
SecLDAP plugin failed to get name for the entry XIR2 SP2
When a user who is in the ldap store attempts to log into InfoView, after about 10 minutes, he gets a message as follows:
Account Information Not Recognized: An error occurred at the server: the secLdap plugin failed to get the name for the entry with dn=cn= with what appears to be appropriate information. This user does not appear to have a presence in BO (does not have an inbox, favorites, etc) nor does he appear in the ldap userlist in the CMC.
Can you describe the functionality contained in this plugin ? It's function ?
Thank you,
Vicki StanfieldHi,
if you need a functional overview, check this SAP Note:
https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3133383439313526
You need a S-User for Login.
Regards
-Seb. -
Deploy Monitoring reports Fail Cannot get the ReportServerWebService URL
Hi, I am deploying the monitoring reports in a single host different to FE or Backend
When I launch the wizard the installation fail with the message:
> Deploying Monitoring Reports... This might take a few minutes.
The Monitoring Database is using SQL instance "mendbsql3\ARCHLYNC2013".
The data source is using SQL instance "(local)\ARCHLYNC2013".
System.Runtime.InteropServices.COMException (0x800700A4) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException (0x800700A4)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()Cannot
get the ReportServerWebService URL. Verify that Reporting Services is deployed and configured properly on the target SQL instance:"mendbsql3\ARCHLYNC2013", and that WMI is included on the exception list of firewall setting on the server that is running
Reporting Services.
I check the configuration of the reporting services configuration, all see OK. I probe the URL in the server that I want to configure like a monitoring reporter
and I can explorer and administrate the Reporting Services. The firewall into the servers is off.
Somebody else have this problem.
THX.Hi Lapatinogo
This is how I install Monitoring in my lab series.
http://lyncme.co.uk/microsoft-lync-server-2013/the-complete-home-lync-lab-part-3-installing-lync-2013-monitoring-and-lync-edge-server/
Navigate –> Lync Server –> Your Site –>
Lync Server 2013 –> Standard Edition Front End Servers –>
Your Server
Right Click –> Edit Properties –> Scroll Down to Monitoring
Tick Monitoring –> Press New –> Enter your
SQL Server FQDN –> Specify your instance –> Untick
This SQL instance is in mirroring relation (As stated in Part 1 you should already have a SQL Server with an instance available) –> Press
OK
Press OK –> Press Action –> Press
Topology –> Press Publish
Press Next
Press Next –> This should complete successfully –> Press
Finish
Launch Lync Deployment Wizard
Press Yes –> Click Deploy Monitoring Reports
Press Next
Press Specify a User Account and Password that has rights to the instance –> Press Next
Press Specify User Group (I will be using the default group) –> Press
Next
Press Finish
Launch the Lync Server Control Panel
Login with an account that is apart of the CSAdministrator
Click View Monitoring reports –> Click your SQL Server FQDN
You should now see the below window Successful deployment of Lync Monitoring
Maybe you are looking for
-
FD33 - Receivable Field in Customer master is not getting updated
FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check? In SD
-
I upgraded to 8.1 and now I keep getting error messages when I try to receive email
One I upgraded I am continually having problems trying to receive email via outlook. An error message appears. Any ideas on how to fix this?
-
Error Message: iTunes library cannot be saved (50) and then iTunes crashes
I am running 64 bit windows vista, with itunes 10.7. I get the error message "Error Message: iTunes library cannot be saved (50)" once or twice and then iTunes crashes entirely. this occurs after a random amount of time using iTunes, and the librar
-
SQL Server 2008 Cumulative update
Hi All, Please let me know if Cumulative Update 9 for SQL Server 2008 SP1 has been certified or not. Also what is an ETA. Thanks. Regards, Raghu.
-
Icons disappear in Download stack fan
When I fan out my downloads stack, the icons and file names do not appear. They appear in grid, but not fan. I have repaired permissions, restarted computer, but nothing works. How do I fix it?