Authorisation Error - Hierarchy Node

Hi All,
I have the following error when I try to run a report, there are madatory fields on the variable screen for Cost Centre Hierachy & Cost Element Hierarchy. When using BEx Analyser I can enter passed this error message & the report will display results, however when I use the Portal, a different error message appears.
I need this report to run successfully in the Portal, please can you help
BEx ANALYSER ERROR MESSAGE
Diagnosis
The system has determined the authorized areas (nodes) for the characteristic and the hierarchy (,). It also determined that you do not have authorization for any of these areas.
System Response
If this situation was determined while a variable was being filled, the query cannot be executed or the hierarchy is not displayed.
Procedure
You have to have authorization for at least one node or leaf for the characteristic and the hierarchy (,) so that something can be displayed.
If the selection only comprises end nodes ("leaves") and all of these leaves are covered by value authorizations, a query result is still displayed.
Procedure for System Administration
PORTAL ERROR MESSAGE
WARNING EYE (019): No authority for the node from characteristic ASCH407D, hierarchy YIR BI-KPIGRP (00000000,)
MSGV1: ASCH407D
MSGV2: YIR BI-KPIGRP
MSGV3: 00000000
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
& it will not display results

Hi,
Using the T-code SU01 check what are the authorization do you have. Identify the authorization which is related to cost center/cost element. In the T-code PFCG check if that authorization includes that cost center/cost element hierarchy node or not?
In order that query should run in Portal, relevant authorization must be transported to portal.
Hope it helps.
Regards,
Prakash

Similar Messages

Authorisation in Hierarchy node variable type

Hi,
Is it possible to have a Hierrachy Node variable that is processed by Authorisations ?
Regards,
Saurabh Diwakar

https://wiki.sdn.sap.com/wiki/display/BI/AuthorizationinSAPNWBI
Create BEX variable for authorization
1. Right click on the IO -> choose 'Restrict'
2. Choose 'Selection' = 'Single Value' and 'from Hierarchy' = 'flat list'
If a hierarchy exists, select the hierarchy for the IO
3. Go on the variables tab -> Right click -> 'New variable'
4. For a restriction without hierarchy, the type of variable is 'Characteristic Value' and if you have choose a hierarchy, the type of variable is 'Hierarchy node'
5. Select a variable name & a description
6. Choose 'Processing by': = 'Authorization' then check the characteristic and click 'next'
7. Choose the display area for the variable -> Variable represents: = 'Single Value' or 'Selection Option'
8. Choose if the variable entry is Optional or mandatory,
9. Don't select 'Ready for input' and 'Can be changed in query navigation
10. Next to the end
Hope this would help you ...

DB error with Authorisation on Hierarchy

Hi,
In both web reporting and BeX I get an error that says:
"An exception with the type CX_SY_FILE_AUTHORITY occurred, but was neither
handled locally, nor declared in a RAISING clause
Message no. RS_EXCEPTION000"
It occurs when expending a hierarchy node in one hierarchy, when a (authorisation) filter is set on a node in another hierarchy.
Problem does not occur when using profile sap_all / sap_new
When going to system logs I see the error in the DB occuring:
BY2 Database error -471 at EXE
BY0 > DSNT408I SQLCODE = -471, ERROR: INVOCATION OF FUNCTION OR
BY0 > PROCEDURE SYSPROC .DSNUTILS FAILED DUE TO REASON
BY0 > 00E7900C DSNT418I SQLSTATE
BY0 > 55023 SQLSTATE RETURN CODE
BY0 > DSNT415I SQLERRP = DSNX9WCA SQL PROCEDURE DETECTING ERROR
BY0 > DSNT416I SQLERRD = 0 0 0 -1 0 0 SQ
BY0 > DIAGNOSTIC INFORMATION DSNT416I SQLERRD =
BY0 > X'00000000' X'00000000' X'00000000' X'FFFFFFFF'
Any ideas how this can be resolved?
thanks,

Hi,
A PROCOBJ is a procedural object. There are objects in a database the can't be exported in a normal way so there are annonymous pl/sql blocks written that the datapump code calls. These anonymous blocks will generate the infromation that the datapump needs to export and then import these types of objects. It looks like this anonymous block has an error in it.
I would talk to Oracle customer support and tell them what is happening.
You could always restart the job
impdp user/password attach=user.jobname
The user.jobname is the information it gave you at the beginning of the job. If you didn't specify job_name, then it would be something like:
SYS_IMPORT_SCHEMA_01
SYS_IMPORT_FULL_01
etc. When you get to the impdp prompt do this:
start=skip_current
It will continue the job, but skip the current object being worked on.
Hope this helps
Dean

Run Time Error when trying to select hierarchy node

Hy all,
the situation is the following:
i attempt to create a variable of type "hierarchy node" (for cost center cha) in my planning area, i used the replacement type "user defined value", check on "input allowed by user" and then i create the user entry, in selection condition i run match code and when i try to select a single cost center (not a hierarchy node) expanding the hierarchy tree the system goes dump with the following message:
Runtime Errors         MESSAGE_TYPE_X
Error analysis
Short text of error message:
Program is inconsistent -> see long text
Technical information about the message:
Diagnosis:
An inconsistent program status has occurred. The program cannot be continued.
System response:
The system crashes.
Procedure
         1. Look in OSS for a note under the error message UPC099.
         2. When you open a problem message, send the first pages of the
             system crash message including the section 'Source code excerpt
             ' with the message.
     Procedure for System Administration
    Message classe...... "UPC"
    Number.............. 099
Selecting a hierarchy node (not a single cost center but a text node grouping more cost conter) this problem does not occur.
I appreciate (and reward) any hints.
Thanks in advance
Fabio

Hi,
Go through the oss notes with error message UPC099
Dump during hierarchy selection:<b>536694</b>
Dump when reading a hierarchy with intervals :<b>423953</b>
Regards-
Siddhu
Message was edited by: sidhartha

BW / HR Authorisations errors

We have managed to implement structural authorisations in BW however we are still getting authorisation errors. When running the query using RSRT in the back end, we can see the correct employees and org units are being passed to the query from the ODS 0PA_DS02(values).
A couple of points which could explain the problem.
1. When I generate the authorisation object in RSSM the following errors can be seen.
InfoObject/field 0AP_CRIT does not exist in the system
InfoObject/field 0AP_SCHEME does not exist in the system
2. When running the query the folllowing errors are displayed.
No authority for the node from characteristic 0ORGUNIT, hierarchy ORGEH (
WYou do not have authorization to read object ZBW_HR_SA 'BW HR Structural
Do the users need to have the auth object within a role within their user ID? And is so what values should it have?
regards,
Sanjay

Guys,
Just to let you know we managed to get it working, and the main problems were due to validity dates not filled in the ODS's for Values and Hierarchies. Second issue was we needed to create 2 auth objects one for Org unit and Org Hierarchy and the 2nd for Position and Employee. We are now able to switch between org hierarchy view and flat list view, although are still in testing phase to see it this really is working as it should. Thanks for all your help. And good luck.
regards,
Sanjay

Issue with hierarchy node variable and multiple SAP hierarchies

Hello experts,
We are currently facing an issue when using two SAP hierarchies in Web Intelligence and one of them is restricted with a hierarchy node variable.
The systems we use are a SAP BI 7.01 (SPS 05) and a Business Objects Enterprise XI R3.1 SP2 (fix pack 2.3). I want also to point out that the fix pack 2.3 has been applied to all BOE related components: the SAP integration Kit, client tools, and enterprise (server and client).
The universe used in our scenario is based on a BEX Query with two hierarchies (non-time dependent hierarchies, intervals allowed) loaded on their corresponding characteristics. One of these characteristics is restricted with a hierarchy node variable (manual input, optional, ready for input, multiple single values allowed).
Prerequisites for replicating the problem:
1) When building the web intelligence query select several levels from both hierarchies (they have seven levels each) and the only amount of the InfoCube that the BEX query (that was used to create our universe) relies on.
2) In the hierarchy node variable prompt select a hierarchy node entry (not an actual InfoObject value that exists as transactional data in the InfoCube )
By executing the query built above, all characteristics are returned null (no value) and the key figure with value u201C0u201D. No error messages, no partial results warnings. Now if we go back to u201CEdit queryu201D and select levels of only one of any of the two hierarchies the query runs normally (by selecting the exact same value for the hierarchy node variable prompt).
Any ideas on the matter?
Regards,
Giorgos

Hi,
Have you ever got a solution for this problem?
I have a similar one.
Thanks,
regards, Heike

How to pass a hierarchy node variable value over OpenDocument?

Hello,
I have been unable to link to an instance with matching parameters with opendocument with hierarchy node variables.
Has anyone attempted this or been successful?
Please reference this post I had in the Web Intelligence forum. sInstance=Param not working for sap bw query based reports (FWM 02020)
Here's some background information
We've created 2 new crystal reports based of sap queries.
Report 1, single prompt, no hierarchy.
Result : Can link to specific instance with matching parameters. Great!
Report 2, single prompt, hierarchy based.
Result: Cannot link to specific instance with matching parameters
Parameter list for report 2
[!V000001} : Cost Center/Gr{oup (Multiple) = {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
However when I go into the history and look at the successful instance parameters used, it seems to be picking up an extra parameter ( my guess is node)
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
We have attempted to use the entire string, the first portion, second portion, and just the technical response. No luck.
Any help or pointers would be appreciated!
Nick

Hello Ingo,
I'll explain the situation more clearly,
Report 2, single prompt, hierarchy based.
Result: Cannot link to specific instance with matching parameters with a response from the Bus Objects server
An error has occurred: The object with ID -1 does not exist in the CMS or you don't have the right to access it (FWM 02020)
We have 1 parameter for report 2
{!V000001} : Cost Center/Group (Multiple)
We selected a single value:
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
(The XXX, XXX, & XXX is the description)
We ran a successful instance.
However when I go into the history and look at the successful instance parameters used it displays the following:
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
An extra description seems to appear (The first XXX, XXX & XXX;) Our original selection was only {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
We attempted to build variations of the open document strings
1. We tried the entire parameter response,
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
2. The first description that was not part of the original selection,
XXX, XXX & XXX
3. The technical name and description
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
4. The technical name
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE}
Please let me know if you need more details.
Regards,
Nick

Creation of Hierarchy Node for 0WBS_ELEMT

Hi All,
I am new to creating Hierarchy structures, my Master Data Hierarchy Loads Process chain is failing at 0WBS_ELEMT with Error Message "Node ID 00019537 has not been included in the hierarchy". can any one please Explanin step by step for adding this node to 0WBS_ELEMT.
Thanks in Advance
Satya

Hi satya,
for adding the node go to the Infobject maintainance screengo to Hierarch tab- go to Maintain hierarchy. there select your hierachy and then change. it shows the available structure there u can add ur required node.and then execute the Process chain
Regards
SK

Refreshing Hierarchy node variable in BEx query with change in hierarchy

Hi all,
We have used a hierarchy node variable on Characteristic ZECCSAC (user-defined) and used it in a BEx query with default value set to a particular node value. Upto this, it is working fine.
The hierarchy used in the query, with the hierarchy node variable, was later changed ( and in future it can undergo changes ). Since the number of records in the hierarchy are changing, the nodenames of the hierarchy nodes are changing. But the hier node variable default value is still set to the earlier nodename for that node description. So at runtime it is giving an error "ECCS Account Number is invalid"!
Can anyone suggest how to refresh a hierarchy node variable default value each time a query is run so that the latest nodename is always taken ?
Quick reply will be appreciated.
Thanks

Hi,
You get this with User exits.
Thnaks

Assignment of documents to hierarchy nodes???

Hi,
We are using a NW2004s BI system. After executing a query (BEx Launcher) and when the "Comments" button is selected, we receive the following error:
===========================================================
Assignment of documents to hierarchy nodes is not supported in current KM repository for BU documents (/bw_document/InfoProviderData).
Document will be created without assignment for characteristic OPROFIT_CTR. Migrate documents to a CM repository
===========================================================
Any hints/directions would help me a lot as we are nearing go-live.
Thanks in advance.
Best Regards,
Praveen

The problem is that the KF is not assigned to the hierarchy. We ran in exactly same problem. We solved it by assigning the hierarchy to the KF of which you want to create the document even though you are not showing the hierarchy.
By the way, it seems that we are both using documents .. do you know how to change the assignment template of the document. WHere to customise the document settings ?!
Mikkel Søndergaard

Hierarchy node variable in BPS planning level

Hi gurus,
I have a set of planning levels and packages that are meant for all users. The users currently are segregated by 0costcenter hierarchy nodes, i.e. groups of users are belonging to different nodes within the 0costcenter hierarchy. These group of users each have its respective authorisation profile assigned based on hierarchy node.
The planning levels and packages are configured so that 0costcenter is one of the header characteristics in the layout.
Is there a way for the characteristic 0costcenter in the planning level and packages to derive the cost centers from the authorisation profiles ?
Advice appreciated.
Thanks.

You may consider any of the following:
1. BPS variables with authorization replacement type.
2. BPS variables with user defined values replacement type.
Ravi Thothadri

Execution of a planning function for a row selection of a hierarchy node

Hi all!
Has anyone accomplished to make a configuration, where a planning function would have been executed for a hierarchy node selection and this selection would have been made by a row selection in an analysis item? I can filter the characteristic in a lowest level by selecting rows in analysis item, but if I would select a hierarchy node, the value for the characteristic is empty. I have set the selection state by binding the item_characteristic of analysis item to filter of the other characteristics.
I tried first to reach this functionality by filtering the characteristic with variables in planning modeller filter and determining the values of the variables during runtime by the selection of the analysis item row selection. But I can not implement it as the display hierachy and the hierarchy node selection in the analysis item are variables and modeller does not allow selection of a hierarchy node and hierarchy by variables - even thoug it let's you do it (I receive error message saying "field hienmflag with value 5 is not correct").
Greatful for any working solutions tips you have made up!
Sari

Thanks for the explanation. I come from BPS background and there are few changes when it comes to planning functions in IP. In BPS, the planning function is a bit loosely tied to Planning Package in a sense that a planning function can use any planning package under the planning level to which it belongs. Same is the case in IP (technically), but in BPS the planning package contains all the characteristics and key figures of the planning level and hence the function can execute correctly. What I see in IP is that planning function is very loosely tied to Filter. It can use any filter under the aggregation level even though they differ in the characteristics and key figures. I have tried a PF with different filters and it executes with everyone of them! This doesnu2019t sound right! Am I missing something here?
Also, you can only execute a IP planning function if it is included in a planning sequence. An extra step! The modeling is so intuitive in BPS that IP is a bit repulsive.

Unable to move article between the Hierarchy nodes

Hai Guys,
When I try to move an article from one Article Hierarchy node to another I am getting the following error. I am unable to dig into this also from the "Performance Assistant". Can somebody help me in this regard?
"BW extraction: Incorrect update of material 000000000085007602 with node H8-R095236"
Thanks in advance for your help.
Regards,
Maheshwaran. I

As already stated, iDevices are NOT backup devices.
La Jolla wrote:
I am not using the ITouch as a back-up device.
Yes you are.
In your own words:
La Jolla wrote:
I still cannot replace files lost from my PC but retained on the ITouch.
Syncing is one way, computer to iDevice. The only exception is content acquired via iTunes.
With the device connected to the computer select File > Transfer Purchases

How to filter hierarchy node in BEX query designer

Dear experts
We are working on FI balance sheet with hierarchy infoobject 0GLACCEXT. Example of our balance sheet is as follow:
Parent Node A = 20
     Sub-parent Node A1 = 10
         Leaf A11 = 5
             Leaf A12 = 5
Parent Node B = 20
     Sub-parent Node B1 = 10
               Leaf B11 = 5
               Leaf B12 = 5
We require only:
    Sub-parent Node A1 = 10
    Leaf B12 = 5
So I filter those out in BEX restriction; however, after we examine the report in tcode RSRT, "Sub-parent Node A1" is not shown in BEX Report, and the result is as follow：
Parent Node B = 5
     Sub-parent Node B1 = 5
             Leaf B12 = 5
Are there solutions for us to show merely A1 and B12 ?

Hi Chu
Try the following steps.
Initial Output
In this example I will restrict the query for only displaying Node 8603 and leaf 9000
Proceed to restrict the Characteristic. Please be aware of the difference between hierarchy nodes and leaf characteristic values. Also set the Hierarchy display properties to expand up to level 1.
Execute the query again:
Please be aware that users will still be able to expand node 8603 and see the lower level nodes/leaf. In order to restrict users from doing this set up users authorizations.
Regards,
Carlos

DSO or ODS "Insert New Hierarchy Nodes" under Data Fields

When you insert info objects under the Data Fields in DSO right mouse click on the Data Fields icon and you will find Insert New Hierarchy Nodes . I created a hierarchy node with infoobjects associating with it which will be visible under the Filters Folder in BEx Query designer as a seperate folder. I can add them to the infoobjects from this folder into the query. I did not know how to apply this functionality in Queries and what it really does. My guess was you can create dynamic hierarchy using characteristic infoobjects from transactional data.Any ideas or links to documentation. This option was available from 7.X in DSO's and i think even in 3.x ODS.

Hi,
May help you:----
http://help.sap.com/saphelp_nw70/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
You could feel the flexibility of using this hierarchial display in the Query. Try to create any Query on this DSO.
Regards,
Suman

Authorisation Error - Hierarchy Node

Similar Messages

Maybe you are looking for