Execution of a planning function for a row selection of a hierarchy node

Hi all!
Has anyone accomplished to make a configuration, where a planning function would have been executed for a hierarchy node selection and this selection would have been made by a row selection in an analysis item? I can filter the characteristic in a lowest level by selecting rows in analysis item, but if I would select a hierarchy node, the value for the characteristic is empty. I have set the selection state by binding the item_characteristic of analysis item to filter of the other characteristics.
I tried first to reach this functionality by filtering the characteristic with variables in planning modeller filter and determining the values of the variables during runtime by the selection of the analysis item row selection. But I can not implement it as the display hierachy and the hierarchy node selection in the analysis item are variables and modeller does not allow selection of a hierarchy node and hierarchy by variables - even thoug it let's you do it (I receive error message saying "field hienmflag with value 5 is not correct").
Greatful for any working solutions tips you have made up!
Sari

Thanks for the explanation. I come from BPS background and there are few changes when it comes to planning functions in IP. In BPS, the planning function is a bit loosely tied to Planning Package in a sense that a planning function can use any planning package under the planning level to which it belongs. Same is the case in IP (technically), but in BPS the planning package contains all the characteristics and key figures of the planning level and hence the function can execute correctly. What I see in IP is that planning function is very loosely tied to Filter. It can use any filter under the aggregation level even though they differ in the characteristics and key figures. I have tried a PF with different filters and it executes with everyone of them! This doesnu2019t sound right! Am I missing something here?
Also, you can only execute a IP planning function if it is included in a planning sequence. An extra step! The modeling is so intuitive in BPS that IP is a bit repulsive.

Similar Messages

BI IP --- Planning function for File Upload

Hai All,
In BI IP , When I am trying to load the data (text file) by using Planning function for File Upload. I am getting an error message When I am clicking on Update .
Error Message : Inconsistent input parameter (parameter: <unknown>, value <unknown>).
In Text file I am using Tab Separation for each value
Anyone help me out.
Thanks,
Bhima

Hi Bhima
Try one of these; it should work:
1. If you are on SP 14 you would need to upgrade to SP 15. It would work fine
2. If not, then -
a] apply note 1070655 - Termination msg CL_RSPLFR_CONTROLLER =>GET_READ_WRITE_PROVIDS
b] Apply Correction Instruction 566059 [i.e: in Object - CL_RSPLFR_CONTROLLER GET_READ_WRITE_PROVIDS,
delete the block: l_r_alvl = cl_rspls_alvl=>factory( i_aggrlevel = p_infoprov ).
and insert block - l_r_alvl = cl_rspls_alvl=>factory( i_aggrlevel = i_infoprov ).
Goodluck
Srikanth

Execution of a planning function with the used dimension values in a crosstab

Hello,
would like to execute planning functions within Design Studio but I don't really know how I combine this execution with the used dimension values in a crosstab for the .
Here the requirement:
3 Planning functions which should use the same filter (all values of all dimensions in the crosstab) and which should run one after another:
// open data slice
PF_1.execute();
// generate combinitions
PF_2.execute();
// close data slice
PF_3.execute();
Many thanks in advance.
Kind regards,
Tobias

Hi Arun,
in general it is not possible to nest planning functions. The inner function would update the data in the plan buffer without the outer function knowing about it. Also the inner function might be on a different aggregation level which would make things very tricky.
Alternatively you can include ABAP logic into a FOX formula:
http://help.sap.com/saphelp_nw70/helpdata/en/47/94eb78b6394befe10000000a42189d/frameset.htm
Or just create the complete logic in one ABAP planning function type.
Regards,
Marc
SAP NetWeaver RIG

Variable screen in Planning Function for Integrated Planning

Hi all.
I have created a planning application with the WAD, based on an Input_ready Query. Manual planning works fine and even planning functions go well, using the command wizard.
However, if I try to use a variable in a planning function and I set the parameter to pop-up the variable screen within the command wizard for a planning function, I get an 'uncaught exception'. An almost blank IE-window pops up which is supposed to display the variables, but it fails.
Does anybody know how to solve this?
Gr.,
Marc.

Hello Marc,
do you still have this error? I encountered the same problem with SPS 9. Maybe you should install at least SPS 10. The variable popup works correct there.
Best regards
Martin

Can I use Concatenate function for multiple rows?

I have a lead list that contains 5000 leads. The format of this list contains address data that is saved in separate columns (ie: address, address 2, city, state, zip). I need this data in 1 column. I tried to use the concatenate function to combine the data for 1 row and it worked perfectly. I tried to do this for multiple rows and the function is greyed out. Is there a work around or way that I can combine this data for all 5000 rows without doing it 1 by one?

Look at this table;
In B9, the formula is;
=B2&" "&C2&" "&D2&" "&E2&" "&B3&" "&C3&" "&D3&" "&E3
Yvan KOENIG (VALLAURIS, France) dimanche 18 octobre 2009 20:51:47

Error during the execution of a planning function in BI 7

Dear All,
I created an input ready query and took it into a workbook.
I have to execute a planning function (by a button) which calculates some new data but I get the following error after I clicked on the button message:
Error when inserting or changing in a sorted table
And the BW server closes the connection.
Any help?
Thanks in Advance,
Dezso

You seem to be having a multi-mapping involved.
The operation mapping has to produce at least the start and end tag.....even if the entire message is not present
Ex:
<SRC>
<First>
<Middle>
<Last>
</SRC>
If above is the structure, then it should be ensured that at least <SRC></SRC> is created by your mapping program....however in your case this is not happening....the tags that you see Messages and Message1 are due to the multi-mapping program and your message should be more than this.
if you say that occurence is 0..1 then what you can do is map this 0..1 node (root) with at least a blank Constant.
Unless you create a message (even though empty) you will continue to receive the error message.
Regards,
Abhishek.

Calling DB function for each row in a report

I'd like to call a function inside a database package from my Oracle Report. My report is a very simple tabular listing and I'd like to pass one the row's column value as a parameter to my function call.
Where would i have to write this block of code? How do I get the value of a particular column in the report? I need to pass the value to the function call.
Thanks

Depends what you want to do in this function. There are several possibilites:
- Add a formula column to your data model.
- Directly call the function in your query:
select col1, col2, my_package.my_function(col1) return_value
from my_table
where ...The 2nd option would be my preferred one.

A Listener For JTable Row Selection Changed?

Never mind... Thought of a couple other things after I posted and found ListSelectionListener. This looks like it fulfills my requirement nicely. - cimmerian76
>>>
TableModelListener isn't what I am looking for here. Basically, I'm looking for something that behaves in a way that is analogous to
TreeSelectionListener's valueChanged(...). Perhaps I'm looking in the wrong places, but the only things I've found were RowSet listener (not even close)
and TableModelListener (not exactly what I'm looking for - I'm not concerned about data in the table changing).
The tool I'm writing displays additional information about the object in the row selected in an adjacent panel.
This display should change every time a user selects a different row.
I can mimic the behavior I want using a mouse listener on the table, so this isn't an emergency.
It's more about curiosity. If I can find something that produces this functionality directly, I would prefer to use that.
<<<
Message was edited by:
cimmerian76

Hi,
you can use this to handle selection events for the table:
yourTable.getSelectionModel().addListSelectionListener(... );
Now e.g. the class containing your main can implement interface ListSelectionListener.

How to disable resize function for multiple rows of inputText?

I have a multiple rows inputText component like below:
<af:inputText label="#{ZccToolbarGenBundle['OLabel.TransferNote']}"
id="it1" autoSubmit="true" columns="150"
immediate="true" simple="true" rows="5"
binding="#{transferBean.transferNoteText}"/>
How can I turn off the resizing icon on the bottom of right hand side of this input text box?
Thanks for any help.

Timo, the bug that I filed has been changed to 'not a bug'. The reason of that is 'That correct as it is not a valid CSS style on all browsers'. I sent email to ADF faces team and got following answers: 1. StyleClass that has agent specific setting for this setting. 2. You put the style class in a skin file and reference it. you can not use the inline style notation. It wants a Style Class.
My question is what kind of StyleClass or skin file do you use so that you can use contentStyle="resize:none;"? Thanks.

Procedure or function for insert into select ...

Hi!
We need to know if we can create a procedure or function that will run the following script:
insert into agent.train_schedule
select 4000, '06:25' ,trunc(sysdate, 'year')+t.n
from agent.trains, (select rownum -1 n from dual
connect by level <= 365) t
where agent.trains.id = 4000 and
agent.trains.weekday like '%'||to_char(trunc(sysdate, 'year')+t.n, 'd',
'nls_date_language=AMERICAN')||'%';
The script inserts the train schedule dates into the train schedule table in accordance to the trains table.
Any help would be appreciated.
Thanks!

Try the below:
Create Or Replace procedure test_proc(p_train_no number, p_train_time varchar2) as
begin
insert into agent.train_schedule
select p_train_no, p_train_time ,trunc(sysdate, 'year')+t.n
from agent.trains, (select rownum -1 n from dual
connect by level <= 365) t
where agent.trains.id = p_train_no and
agent.trains.weekday like '%'||to_char(trunc(sysdate, 'year')+t.n, 'd',
'nls_date_language=AMERICAN')||'%';
end;
Call the procedure from the gui also pass the train number and the train time.
Regards,
Samujjwal Basu

Integrated Planning: Planning Functions in the Web - Issues with Binding

Hi
We are on SPS 11 and are having some difficulties getting our Planning Functions to execute corerctly in the web templates.
I have created a simple planning function that performs a distribution.
The Planning Function works as expected using the plannning wizard and ristricts the data based on the Filter that I have created on the Aggregation Level as well as the Planning Function Selections.
I have created a query and web template that contains the same restriction as the filter in my aggregation level. The Agg Level filter / planning function and Query Filter all contain the Hierarchy Node Variable ZN_CC1 for the standard Cost Center Hierarchy.
I have created the following 4 Planning Buttons to test the execution of the Planning Function in the Web:
1. Planning Function Simple. Binding ref to the DP_1 (Query), Variable = Hierarchy Variable ZN_CC1, Planning Function ZDistrib1.
2. Planning Function Simple. Binding ref to the DP_1 (Query), Variable = Variable Input String Default ZN_CC1, Planning Function ZDistrib1.
3. Planning Function Simple. Binding ref to the DP_1 (Query), Variable = Hierarchy Variable ZN_CC1, Planning Function ZDistrib1. Display variable property selected.
4. Planning Function Simple. Binding ref to the DP_1 (Query), Cost Center Characteristic Data Provider Selection Default, Planning Function ZDistrib1.
When the query is executed and a node representing a group in the hierarchy is selected the query is executed and is input ready for the selected group. This is a subset of the hierarchy.
When the above planning fucntions are executed the following results display.
1. The planning function is executed however it is not restricted to the selection based on the hierarhcy variable node selected by the user. The planning function is executed for the entrire hierarchy. It is not restricted by the cost center hierarchy node variable value.
2. The planning function is executed however it is not restricted to the selection based on the hierarhcy variable node selected by the user. The planning function is executed for the entrire hierarchy. It is not restricted by the cost center hierarchy node variable value.
3. The variable popup displays and a hierarchy node is selected. The planning function is executed however it is not restricted to the selection based on the hierarhcy variable node selected by the user. The planning function is executed for the entrire hierarchy. It is not restricted by the cost center hierarchy node variable value, that was entered when prompted.
4. The planning function is executed however it is not restricted to the cost center selection based on the query DP1. The planning function is not restricted by the cost center selections.
HOWEVER,
If I goto to the filter web item and edit the cost center filter by selecting and adding all available cost centers to the filter. (This list of cost centers is restricted to the cost centers subordinate to the hierarhcy node selected in the variable)
When the above the planning functions are executed the function is now restricted to the cost centers added to the filter as explained above.
If anyone has had a similar issue with Planning Functions executing for data outside of the Dataprovider Selections I would be interested to know how you managed to get the planning function to retrict to the DP Selections that include hierarchy node variables.
If anyone from SAP can comment before I raise this as an OSS issue it would be much appreciated.
Thanks in advance.
Ian

Hi
Just wondering if this is the correct forum to post BI IP questions?
Any comments if this the right forum.
Thanks
Ian

BPS planning folder; Scroll to top after execution of planning function

Hi All,
After execution of a planning function, or after saving data in a planning folder, the layout jumps back to the top and displays the first row, even if the user was positioned on another row.
I know BPS does this because it recalculates the data and tries to display it.
However, it is not very user friendly.
Did anyone ever solve this ?
How do you remain positionned on the line you are working on after saving or execution a BPS planning function?
Thanks in advance for your answer,
Points will be rewarded to solutions.
Filip Ledoux


Hi 
There are some APIs which BPS uses internally to save data. You can make a Planning Function of Type EXIT using function moule of your own calling API_SEMBPS_POST (to save data). 
You can call this EXIT Function as a step next to your copy function in your Global Planning Sequence. 
Please refer to Note 422998 - SEM-BPS processing large data volumes if you need further details for implementing this solution.
 
Hope it helps. 
Cheers Abhijit
It's a good habit to reward someone with points in SDN if you think his/her
response was helpful to you

IP - Fox Code - Planning Function -How to do a mass upload for filters ?

Hello Guys,
I have a question regarding executing a planning function.
I have a planning function with filters
Profit center
Sales Order no
Line Item No
Fiscal Period/Year
From Indicator
To Indicator
This planning function is ideally used to change few records where the user enter a sales order no and line item no, profit center and all above parameters. It works fine.
But one user has a requirement where he has to do a mass update. I have to do it in batch or mass update for example about 100 line items
Sales Order   Line Item
100                 10
100                 20
200                10
300                30
300                40
plus the profit center , from indicator and to indicator.It will be very tedious for the user to enter the values and it can't work . because it will take more time time to execute the planning function for each sales order and line item.
How to create the filter for above values. I will be getting a excel spreadsheet. I can ask the user to give in the above format like
sales order, line item, profit center, from indicator, to indicator,Fiscalyear/period.
Then I have to upload the excel spreadsheet to create the filter values and then execute the planning function.
We are using the Integrated Planning tool and planning function is in fox code.
Can you guys throw some pointers how to achieve the above solution.Thanks
Senthil

Hello Senthil,
There is a standard functionality of file upload ,which can be used in your scenario.
You can give the hyperlink directly to user either in WAD or excel where in that link user can select the varaible values for profit center ,sales order no etc for upload and at the back of this functionality you will be using the file upload planning function to load the data.
Can check the link below for more details:-
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-2
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90cef248-29e0-2910-11bb-df8dece7e22c

Fox formula for actual/plan data - Planning function

Hello,
I am working on the following scenarios for developing a planning functions for a monthly forecast.
It is rolling montly forcast where user starts the planning in Jan and he has to show the actaul value for the month of Jan and blank values for the remaining 11 months of the year and then the user post his new forecast values for the remain 11 of the year(to replace initial balnk values) so that the data will be saved to real time cube with version v108
In Feb, Jan & Feb months has to show the act values and remaining 10 months has to show last month forecast data. The the user may revise the forecast for the 10 months and then we have to write the data to the real time cube with version v208
In Mar, Jan, Feb and Mar has to show the actual values and the reamining 9 months has to show the last month forecast and then users may revise the forecast data and then i have to write back to the cube with version v308.
I want to automate this process for all the months and all years without manual intervention. So, i decideed to write a fox formula for this scenario with following draft code.
I will get the fy period & year as a variable values and then take the system date into the variable
for each fy period
if the fy perio <= sys date.
{version, infoprovider,value type,amount} = {0,act cube, 10, 0amount)
else
{version, infoprovider,value type,amount} = {result,plan cube, 20, 0amount)
endif.
result will be calculated on the separe routine and populated here
case (fy per)
when 01.
concatenate v1 with fy+2(2) into y
result = v1+y
when 02.
concatenate v2 with fy+2(2) into y
result = v2+y
when 03.
concatenate v3 with fy+2(2) into y
result = v3+y
when 04.
concatenate v4 with fy+2(2) into y
result = v4+y
when 05.
concatenate v5 with fy+2(2) into y
result = v5+y
when 06.
concatenate v6 with fy+2(2) into y
result = v6+y
when 07.
concatenate v7 with fy+2(2) into y
result = v7+y
etc...for all months
So, can you please let me know the best way to implement this (either by fox formuls or exits)...your inputs are really appreciated
Thanks,
Srini
Edited by: srini on Mar 28, 2008 12:05 PM

Hi Srini,
If I 've understood u r problem clearly ,You have to write two Fox Functions and you can call exit variable in both to check the system date.
I think first you should create exit varriable which would return the system date,use the same variable in data slice to lock the data till current period.
After that create one fox restricted with any one version where you can copy the data for planning .for example:-
1)First Fox:-
DATA TIM_FISCPER TYPE 0FISCPER.
TIM_REF_FISCPER = VARV(ZEXIT_FPER).
Get the last month
version using modlue or any another logic .(v108)
FOREACH TIM_FISCPER.
 IF TIM_FISCPER <= TIM_REF_FISCPER.
{0amount,version(001) ,tim_fiscper} = {0amount,version(000) ,tim_fiscper}.
else.
{0amount,version(001) ,tim_fiscper} = {0amount,version(v108) ,tim_fiscper}.
 endfor.
Its just n example use the granularity according to the requirement.
2)Second fox would save the changed plan data:-
DATA TIM_FISCPER TYPE 0FISCPER.
TIM_REF_FISCPER = VARV(ZEXIT_FPER).
Get the last month
version using modlue or any another logic .(v208)
FOREACH TIM_FISCPER.
 IF TIM_FISCPER > TIM_REF_FISCPER.
{0amount,version(v208) ,tim_fiscper} = {0amount,version(001) ,tim_fiscper}.
 endfor.
Here ZEXIT_FPER is an exit variable created using cmod and populated with system date.
Hope it will helpful for u.
Rgds,
Indu

Rsplan filter for planning function

Hi.
When creating button in bex analyzer for launching some planning function there is point Use selection from Data Provider
where I see only providers based on queries, but none of filters created in transaction rsplan.
What i am doing wrong?

Hi,
Search "Creating Planning Applications in the BEx Analyzer" in help.sap.com or google.
In the context menu of the button, choose Properties. The first dialog box for the command wizard appear
   a.      Select Planning-Specific Command, and choose Next ->.
   b.      Choose the required planning-specific command:
                i.       Select Execute Planning Function.
                ii.       Select the required planning function and data provider DP_01 as the filter.
Regards,
Michael

Execution of a planning function for a row selection of a hierarchy node

Similar Messages

Maybe you are looking for