Sales office for an employee is displayed wrong for an activity.

Hello,
I am facing problem in Activity Moniter.
An activity is maintained in the Tcode CRM_BUS2000126.So while monitering that activity through Activity moniter ,the Sales office for that particular employee is shown wrong and this sales office is not at all needed .
So can i delete it.
If I delete it will there be any problem .
OR
where can I make changes for Sales office if the sales of is wrong.
Hint:In our Org structure the one userid is assigned to more than 2 Sales office.
So please say whether this may be the problem or not.
Regards,
divya.

As said in the preceding reply, if the status of the document is in simulation then you can delete else if it has been created, then document reversal needs to be done by selecting that particular document ID.

Similar Messages

How to exclude sales office for combination sales order type/division?

Hi experts,
I would appreciate if you could advise: How to exclude sales office for combination sales order type/division in ECC 6.0 ?

Hi
Standard SAP functionality would not be able to cater to this. Ideally create a Z table with sales order type and sales office combination. Put in entries for combinations that are allowed. In Sales order program MV45AFZZ use the exit USEREXIT_MOVE_FIELD_TO_VBAK. In this exit write down the logic passing the sales office determined and the order type and check if the entry is there or not. If the entry is there then it should go on to the next step. If it does not then pass an error message. You need to use the help of your ABAP er for this.
Thanks
Indranil

Not reflecting the sales offices for top down manual planning hierarchy

Hi Experts,
Please help me on this issue.
I hava an Hierarchy like from District to Offices
for eg: for district-                'ZBHDEL' I have salesoffice like 100, 101, 102, 103,105.
like wise for other district          'zbhyd' i have salesoffices like 200, 201, 202.
I have created the Mannual layout with Hierachy datamodel with BPS characteristics, TOP-DOWN, AND enabled check entry.
In the additional setting i have select All Possible combinations.
District at Headerlevl, along with Product and Division
and selected salesoffice at Leadcoloumn.
My Planning levell and package contains : for sales office slected Hierarchy at planning level.
BRAND
Base Unit
Company code
Country
Currency
Division
Fiscal year/period
Fiscal Year Variant
PRODUCT
SIZE
Sales District
Sales Office
Segment
Version
*The Prolem is when i input some plan for a district ZBHDEL from the other layout, WHEN I RUN THE sALES OFFICE hIERARCHY
Mannual Layout its not reflecting the sales office where i have to plan for the salesoffices by seeing the values
of planned District.
where as for one district i can able to see the sales offices. even i have maintained the masterdata at Infoobject level.
Can anybody please help me out.
thanks
Deenu
Edited by: deenu prasad on Aug 4, 2010 7:07 AM

Create hierarchy for sales district info-object in following way.
Sales District         Text Node                          Level 1
Sales Distirct         Characteristics Node         Level 2
                              value 1 = ZBHDEL
                              value 2 = ZBHYD
sales Office          Characteristics Node         Level 3
                              values will be according to district (include diff sales offices for diff districts in level 2)
restrict district to this hierarchy in planning level and plan according by both approaches (create 2 seperate layouts):
Top down - to plan at main node i.e. sales district
bottom up - to plan at sub node i.e. sales office

Authorization in Webclient on Sales Office for Opportunity and Activity

Hi all,
I am trying to set up ou authorization scenario in CRM 2007 Webclient.
I would like to restrict the access to Opportunities and Activities based on the Sales Office of the user.
I have set up the following objects:
CRM_ORD_LP and CRM_ORD_OE.
The USER is assigned to a Business Partner (Employee) which is assigned to a Position which is assigned to a Sales Group -> Sales Office -> Sales Org.. etc.
In SAP GUI this is working fine but in the Webclient I am able to create/edit and display opportunities and activities for all Sales Offices.
Please let me know!
BR,
//Anders
Edited by: Anders Grönwald on Dec 4, 2008 12:49 PM
Edited by: Anders Grönwald on Dec 4, 2008 12:55 PM

Hi Anders
Were you able to resolve this issue
If so could you indicate how this was achieved
Regards
Eddie

Restriction on Sales Office for Sales Transaction

Dear All
We have a requirement to restrict our derived roles for SD modules on division and Sales office. By default , division (org element) is coming in Auth tab , however sales office is not populated. Hence , as of now we are able to restrict on Division only.
To restrict on Sales office as well, i have followed below options:
1) Manually added object "V_VBKA_VKO" in profile and maintained field "VKBUR". ---- Didn't work.
2) Added object "V_VBKA_VKO" for va01 in su24. Then added va01 in role and restricted it for Sales office through "VKBUR" field. --- Didnt work.
Please help , how can we restrict this based on Sales Office also.
Regards
Urvish Patel

Hi,
Please troubleshoot as below,
Check if respective sales structure is maintained in SPRO to control it on sales office.
Put ST01 trace and see if any object is coming in the trace for sales office.
You have to maintain that object with respective sales office.
If you want sales office to come as org level you will have to define this field as org field with PFCG_ORGFIELD_CREATE report, (Please note once you convert this as org field it will be reflected for all objects which has this field.
Hope this helps you.
BR,
Mangesh

How to maintain a customer for one sales office

Dear All,
One customer was assigned to more than 1 sales office. Due to this collection report which customized based on sales office was showing wrong data. We need to maintain only one sales office for one customer.
If we change in master data all transactions done previously may change.So they ask to change in reference table and check the report.
Tell me where can we find the reference table. How to maintain like above.
Regards,
Ganesh

So they ask to change in reference table
What do you mean by this ?? If you want to check what are all the changes made to a customer master, then check in XD04.
thanks
G. Lakshmipathi

Authorization object for sales office

Hi,
We have a requirement, we have one our head office and there are around 20 sales office, for each sales office there is a different user id (two user logins per sales office ), in customer master for each customer we are assignning one sales office, and only the user of that office is responsible for all types of transaction for that customer, we want that sales office assignment to user, and that user should not able to see the any details of customer like sales orders, billing details order booking etc. which is not in there sale sales office , so which authorization object, or how we can get this,
regards,
zafar

Hi
Sometimes when you add a new authorisation object with some specific value, system still allow to do the transaction for other values which is not available in that authorisation object, because may be in some other Profile same Authorisation Object is available and where user has complete rights, so kindly take the help of Basis Consultant and check that same Object is not availbale in some other profile of User with complete authorisation.
Thanks and regards,
Amitesh Anand

Sales Office Master - Country, Region and Time Zone

Dear All,
In one of the Project, for some config-settings, I need to create Sales Offices. Here, Sales Offices is basically the Countries, to which business is happening.
For example,
Jordan
Mexico
Colombia
etc...
Now, while maintaining Sales Office records, System prompts for Sales Office Address. Initally, i maintained Country as per the Sales Office, for example:
For Sales Office Nepal, Country Nepal
For Sales Office Mexico, Country Mexico
etc...
Now, when i checked previously maintained entries in to System, I found that:
For Sales Office New Hampshire, Country India
For Sales Office California, Country India
etc...
When, I inquired about the same to concern Persons, within particular Organization, they are unable to explain, as these entries are maintained by Previous Implementation-Partner.
Can anyone explain, what entry needs to be maintained as Address - Country, Region and Time Zone, for International Offices? Is there particular logic for the same?
Best Reagrds,
Amit

Dear All,
Thanks for the Support, provided.
Let me explain, my scenario, in detail.
I am maintaining Profit Center, in Sales Order, based upon Substitution Rule.
For that, I have to maintain Profit Center, based upon Sales Area and Sales Office combination.
suppose, If my combination is:
1. if Sales Area is 10100107 and Sales Office is Colombia, then Profit center would be X
2. if Sales Area is 10100107 and Sales Office is Mongolia, then Profit center would be Y
Now, Important aspect is all Sales Organizations are maintained under Company Code ABC; and Company ABC is maintained under Country INDIA. Whereas, Sales Offices are both, Domestic, as well as International.
My queries are:
1. What effect has gone be made, if Sales Org is maintained under India and Sales Office, under some other country, in Sales Order?
2. Also, based upon Sales Office, System must pick the Transaction Currency, in Sales Order?
Best Regards,
Amit

Sales Office wise Billing

Hi
For different Sales Offices i need to create invoces with the same Billing document type ZF2,
but the number series of invoice should be different for differnet sales office
for Eg: For Sales Office A the invoice number should start like 82000000. and for Sales office B it should be 93000000.
How can i do this ?

Hi Raja,
Ask you ABAP person to create a ZTABLE through transaction SM30.
You can include 3 columns in the ZTABLE such as sales office,billing document type and the number range.
Instead of picking the number range from the standard configuratin,write a code so that system should pick number range from the ZTABLE.
We did the same in one of my project and it worked fine.
Reward points if it helps.
Regards
Karan

Sales office differ in header n cust.master how to get error message

hi all,
i have a problem regarding sales office. in our project we define branch offices as sales office in SAP.sales n deliveries will be done through branch office. for that we created branch office as plant as well as sales office. we assign sales groups to customers.when creating sales order we r entering S.O, D.C, DIV N sales office.when ever sales office differs from customer master and what we r entering at the time of sales order automatically system taking header sales office it is not considering customer master sales office. for our project if sales office differs system should give error message, should not allow the user to create sales order. i think u people can help me.
thanks in advance

HI Chanakya.,
In order we dont give the sales office as it is picked directly from the customer master record ,If your client pressurise for that requirement of error message ,contact your ABAPERS so that they can satisfy the requiement
REWARD if helpfull
Thanks & Regards
Narayana

How to define a user to raise sales orders in given sales office.

Hi,
Kindly help.
We have a requirement that we need to restrict some of the users from creating sales orders in some of the sales offices.We have a scenario in which all the sales offices are assigned to single sales organisation.But in authorisation tab,we do not have an option to restrict the sales office for VA01(Sales order T-code).We can only restrict any off the below given parameters but no sales office.
-Sales organisation
-Division
-Distribution channel
-Controlling area.
Please let us know how can we define a user to create sales orders in only some of sales offices.
Kindly help.
Thanks and Regards
Syamkrishnan
SAP Basis

hi,
u can control the same using basis authorisation. u can put the restriction on hte basis of the doc type and the sales order.
saurabh

Merge of Sales Offices?

Hi,
There are 2 comp's running in SAP. Now both are merged.
for this, they want to use one office as consolidated ( so far, they r using 2 sales offices in different comp codes, after merge sales office will be common for both, then as per their req, client wants to have only one sales office for both)
these sales offices maintianed in all Customer master data of both the comp's.
now if they want to consolidate we have to update all the CMR with one Sales office?
can we use BDC for this? or MASS usage?
Please let me know the table name for condition records where it will store?( they maintained some records specific to sales office, i have to find out how many condtion records exist for sales office specific)
Can any one have idea?
plz ,

Here are some tables list, however i didn't quite get your requirement clearly. Condition record, do you mean pricing condition reconrds...
Just to be on safer side i am posting all relevant which came to my mind at this time.
Customer master data
KNA1          Customer master
KNB1          Customer / company
KNVV          Customer sales data
KNBK          Bank details
KNVH          Customer hierarchy
KNVP          Customer partners
KNVS          Shipment data for customer
KNVK          Contact persons
KNVI          Customer master tax indicator
SD
TVKO          Sales organisation / company code
TVTW          Distribution channel
TVBUR          Sales office
TVKBT          Sales office text
TVKGR          Sales group
TVGRT          Sales group text
T171T          Sales district text
TVKBZ          Sales office to sales area
TVBVK          Sales group to sales office
Pricing :
KONH          Conditions header
KONP          Conditions items
KONV          Procedure ( billing doc or sales order)
KOND
Hope it helps
Regards

Partner determination based on Employee Responsible for Sale Office

Hi,
In our Project We triggering work flow from lead to sales manager. The Sales Manager is assigned to sales office. We used access sequence CH08 to determine the sales manager in Partner determination but the work flow is triggered to Employee responsible for Sales Group.
The access determines the Employee responsible for org unit and sales group is selected as org unit in lead document. So the employee below the sales Group is selected in sales manager in Partner determination.
Can any one suggest how to select employee from Sales Office in Partner determination.
With regards
Selvam T

Hi,
I created my own role and modified a standard FM.

From where the sales office data is fetched in Activity moniter for an empl

Hello ,
An activity is maintained for an employee who has been maintained in CRM .So the sales office data that is displayed is fetched from which table or Tcode.It dislayed automatically while monitering the Activity in Activity Moniter.
If i want to change the sales office where to change it.
Regards,
divya

Hi Natarajan,
Thanks for your reply.
So what exactly you want me to do ,if i want to change the sales office which is displayed wrong for Bussiness partner ie. Employee.
Please say me the procedure or path to change the Sales office.
Could you please say me "what is Organisation Data profile?"
Regards,
Divya

Is there any heirarchy for retreiving theorg unit or sales office data for

Hello,
If there is only one crm user which is assigned to different sales offices,then while monitering any activity from which sales office or org unit does the data is displayed.
Is there any heirarchy for retreiving theorg unit or sales office data for an employee?
regards,
divya

IF NOT it_vbrk[] IS INITIAL.
Fetching Material no, sub-family, tint and coating codes
    SELECT vbeln posnr fkimg vrkme prsdt netwr matnr arktx mwsbp subfam
           codcol codcoat epaiscom codtyp length width
           INTO CORRESPONDING FIELDS OF TABLE it_vbrp
                       FROM vbrp
                           FOR ALL ENTRIES IN it_vbrk
                           WHERE vbeln   = it_vbrk-vbeln AND
                                 subfam IN s_subfam AND
                                 codcol IN s_codcol AND
                                 codcoat IN s_coat AND
                                 epaiscom IN s_thick.
endif.

Sales office for an employee is displayed wrong for an activity.

Similar Messages

Maybe you are looking for