Authorization issue with VA02 radio buttons
Hello All,
We are stuck at one authorization issue. The user navigates using tcode VA02.
1) Execute Tcode -VA02=>
2) 2) puts order number # 100001 =>
3) press enter =>
4) press enter =>
5) Screen: Change (Company Name) Return 100001: Overview =>
6) Option: Display doc. Header details (looks like a magnifying glass beside PO_date) =>
7) This bring us to Change (Company Name) Return 100001: header Data =>
8) select status tab =>
9) on Status tab lower end there is a button u201CObject Statusu201D =>
10) Press it =>
11) Come to Change Status :
12) On this screen There is Status with status no. on the right side with 7 options
e.g:
u2022 1 BLK Approval Required for,
u2022 2 BL1 Approval for Credit,
u2022 3 BL2 Approval for material Replacer
We need to restrict the radio button access for user for which we are unable to find the authorization object.
Could any one help.
Thanks & Regards
gab
Hi,
Use ST01 to trace the user activities and check which objects its hitting when you click on those buttons, then you can restrict radio buttons using those objects.
I have'nt run the tcode myself and performed the steps you mentioned, but if you think its calling other transaction from those buttons you can manage tht in SE97, or add the t-code VA02 in the S_tcode auth object in PFCG.
Hope this should get you going
Thanks,
Vijay
Similar Messages
-
Dear all,
I have an authorization issue with two ODS.
One I activated for BEx reporting --> Is working fine in Dev, but I get error with
missing authorization in QUA, althought some authorizations.
Same issue with a newly created ODS, which works in Dev, but gives an error
with missing authorization in QUA.
What can be the reason for this? Any input is highly appreciated!
Cheers,
ClaudiaHi,
check that the role(s) are transported from your DEV and your QA, and that the user has the correct role(s)
Check as well in your QA transaction RSSM for your ODSs objects; it might be that by transporting the ODS, some authorizations have been applied by default.
hope this helps...
Olivier. -
When installing my new HP printer I received the following error message when I inserted the software install disk: "The disk you inserted was not readable by this computer" with 2 radio buttons "Ignore" or "reject" I was able to eject the disk but the message remains. Now every time I start up the printer this error message pops up on my computer. I have since used the disk drive successfully for music CD's etc. How can I get rid of this message?
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.
You can send it in to them: https://expresslane.apple.com/GetproductgroupList.action?PRKEYS=PF3
-
Me and my brother have been messing with Assistive Touch on and off since iOS 5 canme out. We been noticing that when we actually move to use the home button, sometimes it doesnt respond. Though I'm all for thinking my home button my be on the fritz, it wouldnt explain how mine and my brother suddenly have issues with our home buttons at the same time. Both of us had a time where the home button didnt respond at all. and its been intermittent ever since. Anybody that has an answer or another case like this I' d like some information
Reset Home button steps:
(1) Tap Settings App, when it is open:
(2) Hold Power button until "slide to power off" bar appears.
(3) Don't slide it, release power button.
(4) Gently, continuously press Home button for few seconds until home screen appears.
(5) Done.
If this does not help, further points to Hardware Problem. -
How do I fix the buffering issues with the radio app?,
How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes. I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?
msbroome wrote:
How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes. I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?
What is your Internet data rate? -
Issue in using radio button in module pool
For same field I need 2 different search help. Based on radio button on screen I need company codeu2019s from different table. Issue is, at execution radio button remains blank. Radio button works only when I use them in PAI under CASE SY-UCOMM. WHEN u2018DONEu2019. IF Normal_Run = u2018Xu2019u2026u2026
Can I use radio button with the below code. Please refer the below code.
PROCESS ON VALUE-REQUEST.
FIELD COMP_CODE MODULE POPULATE_COMP_CODE.
MODULE POPULATE_COMP_CODE INPUT.
IF REPEAT_RUN = 'X'.
PERFORM COMP_CODE_POPULATE.
ELSEIF NORMAL_RUN = 'X'.
PERFORM COMP_CODE_POPULATE_N.
ENDIF.
ENDMODULE.
FORM COMP_CODE_POPULATE .
SELECT COMP_CODE
FROM ZIFRS_D_PROCESS
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB_CC
WHERE PROC_NAME = 'DEPRECIATION RUN'.
READ TABLE VALUES_TAB INDEX 1.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'COMP_CODE'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'COMP_CODE'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB_CC.
ENDFORM. " COMP_CODE_POPULATION
FORM COMP_CODE_POPULATE_N .
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = '/BI0/SCOMP_CODE'
FIELDNAME = 'COMP_CODE'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'COMP_CODE'.
ENDFORM. " COMP_CODE_POPULATE_N
Moderator Message: Please use "code" tags to format the code snippet.
Edited by: Suhas Saha on Nov 23, 2011 5:13 PMHi
You need to make the Grouping for these Radio button on the screen
Search for how to make Radio buttons grouping
radio buttons in screen painter
http://help.sap.com/printdocu/core/print46c/en/data/pdf/BCDWBTUT/BCDWBTUT.pdf
and search for Radio button Group in this document
assign a Function Code for one of the radio buttons(It allows for only one Radio Button)
This triggers automatic PAI so when you take the F4 Help this is readily available
In TOP include make sure you define the variables corresponding to the Radio buttons on the screen and also provide default value X to one of the Radio buttons
Hope this serves your purpose
Cheerz
Ramchander Rao.K -
Report With Multiple Radio Button ,How to reset the values of when selected
Reaching out to the experts here. I have a report which i created a radio group which saves the value rownum when the radio buton is selected to a hidden item based on an on click event. There are currently 3 radio button , i need to be able to "reset" the value of the other items when more than of the button are selected .I.E. There are 3 buttons, user clicks button one , but then decides they need to click button two , then realizes they really wanted to perform button 3 , I want to be able to "reset" the value of the 1st two hidden items so the only value populated is the 3rd hidden item. I am new to working with these features and scenarios so any and help would be appreciated.
Here is the report
SELECT APEX_ITEM.RADIOGROUP(1, ROWNUM, NULL,NULL,'onclick="javascript:$x(''P5_HIDDEN1'').value=' || ROWNUM|| '"') UPDATE_RECORD
,APEX_ITEM.RADIOGROUP(1, ROWNUM, NULL,NULL,'onclick="javascript:$x(''P5_HIDDEN2'').value=' || ROWNUM|| '"') DELETE_RECORD
,APEX_ITEM.RADIOGROUP(1, ROWNUM, NULL,NULL,'onclick="javascript:$x(''P5_HIDDEN3'').value=' || ROWNUM|| '"') SET_PRIMARY
,papf.first_name
,papf.last_name
,hl.meaning
,pp.phone_number
,case when phone_type is not null then (select meaning from hr_lookups where lookup_type ='PHONE_TYPE' and pp.phone_type=lookup_code)
end as phone_type
,emrg.primary_contact_flag
from hr.per_all_people_f papf
,apps.hr_lookups hl
,apps.per_contact_relationships pcr
,apps.per_phones pp
,(select contact_person_id,primary_contact_flag
from apps.per_contact_relationships pcr
where pcr.person_id = :P5_PERSON_ID
and contact_type = 'EMRG') emrg
where pcr.contact_person_id in emrg.contact_person_id
and pcr.personal_flag='Y'
and contact_type <> 'EMRG'
and trunc(sysdate) between date_start and NVL(date_end,'31-DEC-4712')
and pcr.contact_type = hl.lookup_code
and hl.lookup_type='CONTACT'
and pcr.contact_person_id = papf.person_id
and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
and pcr.contact_person_id = pp.parent_id
and pp.phone_type in (select lookup_code from hr_lookups where lookup_type ='PHONE_TYPE')Related thread here How to Pass values from SQL Report into TEXT ITEM ?
Regards, -
Issue with Print Properties button not responding in Adobe Reader 10.1.10
We've recently been upgrading Adobe Reader 9.4.4 to 10.1.10 and started having a few reports of the Print -> Properties box in Adobe Reader not responding. When this happens Adobe Reader will crash if you click on the Print button. If you go into Devices and Printers and try and access the Printer Properties you are prompted to install the driver for the device. It does seem to be quite random, it will work fine for days and the suddenly happen. I've done testing and have been able to get it happen by opening Outlook, Word or Excel but it is completely hit and miss. Sometimes the issue will happen and other times no matter how many times you open and close the various applications it's fine.
Fortunately it only seems to be an issue when accessing Properties, if you just print there are no options which is probably why we don't have more complaints. Unfortunately this didn't come to light until we'd rolled it out to 2000+ machines across 8 locations.
So far I've tried the following:
1. Upgraded to Adobe Reader 11.0.9 and same issue
2. Created a test print queue using a different print driver (my machine has a different driver again and is using a different print server)
3. Uninstalled a number of applications that have caused us issues with Office 2010 due to dodgy addins (Workshare and HP Filesite)
4. Rolled back to 9.4.4 and seems OK. Problem here is that they receive PDFs in formats not compatible with older than X.
System is Windows 7 Enterprise SP1 32bit, Office Professional 2010, printing is to Ricoh Equitrac (Follow You)
Anyone have a fix for this or come across this before. I'm going to try testing with a Postscript driver to see if that helps, which is the last item on Adobe's troubleshooting list.Select a PDF file, CMD+I, check the Open With section, and ensure that AR is selected. If not, then select it and click on the Change All button. Alternatively, select Preview, which is my default PDF reader.
-
Creation of selection screen with 2 radio button groups
Hi All,
I have following selecton screen to be created:
1. Radio Button for File
A. Radio Button for PC File
- Parameter for PC File Input
B. Radio Button for UNIX File
- Parameter for Unix File Input
2. Radio Button for Material
- Material Select-Option
As per above Either of Radio Buttons 1/2 File/Material will be selected.
If 1(File) Selected Radio Button for PC File/Unix File will be selected, No other radio buttons will be active.
If 2(Material) Selected Material Select-option input will be given, No other radio buttons will be active.
How can we write the selection screen code for above design.
Thanks in advance.
Thanks,
Deep.Hi,
go through the following example-----
**************************************INTERNAL TABLE DECLERATION**************************************
DATA: BEGIN OF ITAB2 OCCURS 0,
VALUE(250) TYPE C,
END OF ITAB2.
**************************************DATA DECLERATION************************************************
DATA: PATH LIKE DYNPREAD-FIELDNAME.
DATA : P TYPE STRING,
D TYPE STRING.
DATA : V_DATASET LIKE FILENAMECI-FILEEXTERN.
**************************************SELECTION SCREEN***********************************************
PARAMETERS: V_PATH TYPE RLGRAP-FILENAME DEFAULT 'C:\Documents and Settings\vchaturvedi\Desktop\vijay.txt'.
PARAMETERS: D_PATH TYPE RLGRAP-FILENAME.
SKIP 5.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS: PC_ONE RADIOBUTTON GROUP RAD1 DEFAULT 'X',
PC_OTHER RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR V_PATH.
HELP FOR SEARCHING FILES PATH************************************************
IF PC_ONE = 'X'.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = 'Z8VIJAY_SHADOWER_COVERSIONDATA'
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = PATH
IMPORTING
FILE_NAME = V_PATH.
*******CONVERT IN TO STRING************
P = V_PATH.
ENDIF.
**************************************SELECTION SCREEN VALIDATION***********************************
AT SELECTION-SCREEN.
IF V_PATH = ''.
MESSAGE E014. "FILE PATH NOT FOUND!!!!!!!
ENDIF.
IF D_PATH = ''.
MESSAGE E016. "TARGET FILE NOT FOUND!!!!!!!
ENDIF.
*******************FOR DOWNLOAD**********
AT SELECTION-SCREEN ON VALUE-REQUEST FOR D_PATH.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = 'Z8VIJAY_SHADOWER_COVERSIONDATA'
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = PATH
IMPORTING
FILE_NAME = D_PATH.
***************CONVERT INTO STRING***********
D = D_PATH.
*******************************************MAIN LOGIC************************************************
START-OF-SELECTION.
IF P = ''.
P = 'C:\Documents and Settings\vchaturvedi\Desktop\vijay.txt'.
ENDIF.
******************UPLOAD DATA FROM OTHERS TO INTERNAL TABLE****************
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = P
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = ITAB2
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc = 1.
MESSAGE E014. "FILE PATH NOT FOUND!!!!!!!
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
******************************DOWNLOAD DATA FROM INTERNAL TABLE TO OTHERS******************************
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
FILENAME = D
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
TABLES
DATA_TAB = ITAB2
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF PC_OTHER = 'X'.
****************************8FOR ONE SERVER TO ANOTHER************************************************
OPEN DATASET V_DATASET FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC = 0.
DO.
READ DATASET V_DATASET INTO ITAB2.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
APPEND ITAB2.
ENDDO.
ENDIF.
ENDIF.
*********************************PRINTING DATA *********************************************************
LOOP AT ITAB2.
WRITE :/5 ITAB2-VALUE.
ENDLOOP.
****do reward if usefull
Regards,
vijay -
Getting Computer authorization issue with 11.4!
When I try to synch my IPhone 5S on Windows 8.1 / iTunes 11.4, I keep getting a message that "This computer is not authorized for the apps that are installed on our iPhone" and when I de-authorize and authorize it again, it still does not work...keep getting this message...
Hey Ashfromsea,
Thanks for the question. I understand that you are experiencing issues with iTunes Store authorization. The following resources may provide a solution:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Thanks,
Matt M. -
Computer Authorization issue with iTunes 11.4
When I try to synch my IPhone 5S on Windows 8.1 / iTunes 11.4, I keep getting a message that "This computer is not authorized for the apps that are installed on our iPhone" and when I de-authorize…
Hey Ashfromsea,
Thanks for the question. I understand that you are experiencing issues with iTunes Store authorization. The following resources may provide a solution:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Thanks,
Matt M. -
Authorization issue with Inbound Delievries
Hi,
Can we control authorization of Inbound Delivery creation/Change (VL31N/VL32N) based on receiving point or storage location.
Currently we are only able to control authorization at Plant level which is wide open and client needs restriction at Receiving Point or Storage Location Level.
Let us know the Autho Object to resolve thie security restriction issue.
Regards,Hi,
As i know, we can control the authorization at the Receiving Point level, but i am not sure about the Storage Location level.
You need to check the authorization object with Basis people.
Thanks
Aktar -
Authorization issue with upload functionality
Hi,
I have issue with authorization with upload functionality.
we have country as authorization relavant field. if we are giving some country authorization to user it is giving authorization error at upload functionality.
But if we give all country authorization than it is working fine.
Could you guide me how to avoid this situation. We can not give all country authorization to all the users.
Thanks,
Naman ShahHi Naman,
For SAP BPS
Here while defining a variable you can set the user authorization and can determine which all records can be seen by the user.
For eg. Create a variable for country with replacement type User-specific values. Here you can assign values to a particular user id.
Please check for more details:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/548bafbc0f357ee10000000a11466f/frameset.htm
For SAP IP
Please Check: User Authorization in SAP IP
Regards, Rishi
Edited by: Rishikesh Sinha on May 6, 2009 8:01 AM -
Sap bi authorizations issue with query designer..
i am using bw 3.x and bi 7 query designer with different kind of probs?...
i am able to see the info provider in query desinger 3.x. but i can see only cubes .i am not able to find dso or infosets or multiprovider.. can anyone suggest is there any authorizations issues..please suggest.
and with BI 7 query designer i am not able to see info providers in info areas folder to design a query..
please suggest if any authorizations should be added or nothi suman chakravar,
thanks for replying,
can u be little bit clear about the steps.
i went to tcode su01 and entered profile 0bi_all..it doesnt work.
and executed tcode su56.there i can find list of BI related authorization profiles
i added s_rs_all profile to my user. even then i face the same problem.
i can see only queries in query designer of bi 7 format and i can not view info providers.
i can view only cube and infosets and i can not view dso and multiproviders in bw 3.x type query designer
Edited by: satishchow on Dec 14, 2011 3:23 PM
Maybe you are looking for
-
I would like to install Boot Camp on my MacBook. I can't find any XP discs in my files although I have legal XP on my old PC. I do have a copy of Windows Millennium. What to do?
-
10.5 beautiful OS, but still disappointingly unstable
Just had my first OS freeze under 10.5.4. Right-clicking a (Fireworks) .PNG file in the Finder to open it in FireForks made the Finder keel over and display its too-well-known Wheel Of Death. Every other open app on the system followed - one can swit
-
Passing values to form bean string array from dynamic added textboxes
Hi, I am unable to pass values to form bean string array from a jsp in which I have incorporated dynamically adding of textboxes in javascript. I have given add/delete row option in the jsp. If there is single row, this is working fine. But after add
-
Hi, To analyze Lync issues I have installed these applications in my windows 7 x64 laptop 1) network monitor 3.4 2)Lync network monitor parser 3)nmdecrypt2.3 4)network monitor parser3.4 Installtion got completed successfully but when I try to start c
-
Hi, Is it possible to set the window id or title for an adf dialog. This dialog opens when a button is clicked <af:commandButton action="dialog:openDialog" useWindow="true" /> Thanks in advance.