Authschemes and portal / iviews - need help

I am aware that when I logon to the SAP portal, normally due to authschemes.xml configuration the default authscheme is used to authenticate the user (which uses the ticket auth template). I am interested to know if it is possible to configure the portal so that by entering a different url, I can use a new iview, and the iview will specify a non-default authscheme. This would allow me to logon using one method by entering the normal portal login URL and by another auth method by entering a different URL.
From what I understand about iviews (not much) I think this is possible, but I don't know for sure, and how to make it work. Can you help ?
Regards,
Tim

Patrick,
Sorry, but I am now very confused. I was under the impression that authschemes were configured in authschemes.xml and available for use in any J2EE authentication requirement, not just for portals. I have seen references before to using authschemes for non-portal login, and can see nothing which is portal specific.
My understanding of what you said before is :
1. user accesses portal
2. portal login page redirects to our servlet, which may ask the user some questions or give them options before deciding what type of authentication to use.
3. our servlet triggers the authentication via UME API
4. The auth stack is processed based on the authscheme name given in UME API, and CreateTicketLoginModule will be used to issue an SSO2 ticket for SSO purposes.
5. The servlet will then redirect back to the portal page and the SSO2 ticket in browser will allow the logon to complete.
Is the above what you were suggesting, or if not, can you help me understand where I am getting this confused/wrong ?
The part we are having problems with is step 3 where we are unable to pass the authscheme we want to use as a parameter.
Thanks,
Tim

Similar Messages

I have printers at home and work. i need help programing my macbook print utility so computer knows which printer to use depending on where i am. thanks

i have printers at home and work. i need help programing my macbook print utility so computer knows which printer to use depending on where i am. thanks

Look for cloud solutions such as DropBox, OneDrive, SugarSync or others. They are all cloud based services that sync documents between computers via the cloud. Of course another solution is simply a flash drive formatted in exFat so that Macs and Windows computers can read it.

Issue setting up iview - Need help

Hi,
I'm setting up an iview to surface a SAP BW report through SAP NetWeaver 7.0 (2004s)
I've tested the iview with the following value in the "BEx Web Application Query String" property of the iview
and am able to view my BW report in the portal iview as expected
CMD=LDOC&TEMPLATE_ID=Z_CCA_UK_FIB_OPEX_TOTAL&VAR_NAME_1=ZPERRESP&VAR_VALUE_EXT_1=W123456
I now want to use a variable so that the VAR_VALUE_EXT_1 property of the url is generated at runtime
The VAR_VALUE_EXT_1 property is the user's login id (which must be uppercased for the BW report) so my url now becomes
CMD=LDOC&TEMPLATE_ID=Z_CCA_UK_FIB_OPEX_TOTAL&VAR_NAME_1=ZPERRESP&VAR_VALUE_EXT_1=<User.userID[UPR_CASE]>
The above however fails to give me a report.
On debugging the url at the report end I can see that
&VAR_VALUE_EXT_1=<User.userID[UPR_CASE]> is being presented to the report rather than the user's actual login id
being substituted at run time as expected
I'm using the information here
http://help.sap.com/saphelp_nw04/helpdata/en/36/5e3842134bad04e10000000a1550b0/frameset.htm
as a guide but am unable to get my report to work with the runtime url parameter substitution
Has anyone come across this before and have a solution?
Thanks in advance
Krishna

Hello,
It sounds like you have almost everything set up but the vlan tagging on the ports. You will need to have inter-vlan routing disable which it seems like you have already done (enabling this feature will allow vlans to talk to one another). You may need to take a screen shoot of how everything is set up under L2 switch. Make sure all the ports are set to untagged and set to access port, you will need to put VLAN 1 on ports 1 and 2 and VLAN 2 on ports 3 and 4. As long as all the ports are set to access ports and untagged you should be fine at this point.
If you are still having issues take some screen shoots so we can check and see how it is set up.
Edit: while looking at the admin guide I see they are not called access ports. Guess its been a while since I've checked out a RVS4000.
Hope that helps!
Thanks,
Clayton Sill

Wish I didn't upgrade! and now I need help to figure out how to make it wor

I have a Windows XP Pro 2nd edition with IE ver 6.0.2 (but I normally use FireFox)
I've never had any trouble with iTunes until iTunes "forced" me to upgrade my iTunes applicaiton to version 6 if I wanted to "purchase" music. (note to self: Purchase music from stores it's much safer)...
I upgraded and received no error messages. Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
I have uninstalled and installed 5 different times and ways.
First uninstall was "typical" uninstall. THat didn't fix it.
Second uninstall was "typical" unistall from the Control Panel, and then I removed the folders from the "program File" folder. Still wouldn't work.
Third unintall was "typical" then I removed folders from local drive and removed all "known" registry "itune" keys. That didn't work.
Fourth uninstall was first a "repair" to itunes, and then a "typical" uninstall, then I removed folders, removed registry (does anyone know all of itunes registry keys? Maybe I am missing a few.. the only ones I know of is the "itune" reg). Then I looked through my start up menu from "msconfig" and took a look at my firewall program to see if there was anything preventing the program from running...
Fifth uninstall pretty much fruitless as my previous attempts.
I know it HAS to be a registry key of some sort.. here's why:
When I uninstall and reinstall (no matter how thourough) every time I install the iTunes program Windows XP has never ONCE recognized the new install of iTunes as a "NEW PROGRAM" and it should!
I need help... what registry keys should I be removing? ANyone suggest for me to remove Quick Time too? What about the ipod updater software? Any connection?
HELP??????????????????
THanks
W.

hi wmchisholm!
Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
hmmm. is itunes.exe persisting in Task Manager? if so, first check up on these two possibilities:
iTunes 6 won't open on a Windows computer if firewall software is not up-to-date
iTunes for Windows doesn't open after upgrading
but if itunes.exe is disappearing after a few seconds, try the following technique:
Using MSCONFIG to troubleshoot conflicts in Windows
... and let us know the names (exact spelling please) of the start-up items that you had to disable in order to get itunes to launch. (there's a nasty piece of malware out there that has been causing "error-less" itunes launch failures since late October.)
love, b

I recently sold my iphone 4s back to at&t and bought a galaxy s5 but my brother still has an iphone and when he sends me a text it dosnt always go through and i really need help on what to do next please

I recently sold my iphone 4s back to att and they whiped it clean and now i have a galaxy s5 and my brother still has the iphone but when he sends me texts they dont always go through and i need help on what to do next

See if this helps:
iMesssage to old phone
If you move to another phone and forget to turn off iMessage then read “if you no longer have the device inhttp://support.apple.com/kb/HT5661 If you still cannot resolve it call Apple http://support.apple.com/kb/HE57
To deactivate iMessage http://support.apple.com/kb/ts5185
Read http://m.samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00053450&fm_s eq=62995

So i have Two account on my imac OS X Lion 10.7.5 and dont have administrator and its locked need help asp please Someone!

I have a Imac and i cant acces adminastrator Becuase my two users dont have becuase i took them i dident know that would happen and need help i dont wanna loose all the stuff in the imac so if you can help please message me asp

Use the directions given here:
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

No ACL deny logs for Traffic not matched by Static Object NATs and ACL. Need Help.

I start noticing that I do not see any denied traffic coming in on my ACL. To better explain, lets say I have this config.
### Sample Config ###
object network webserver
host 192.168.1.50
nat (dmz, outside) static X.X.X.X service tcp www www
access-list inbound extended permit ip any4 object webserver eq www
If I generate a traffic from the outside let's say a traffic that is trying to access X.X.X.X via TCP Port 8080 which obviously does not have any NAT entry to it going to my DMZ, I don't see the ACL denies it anymore but instead comes back with a Drop Reason: (nat-no-xlate-to-pat-pool) . On the packet trace I got this. (Below) it seems that does not even hit the ACL as there is no xlate found for it, at least to what the drop reason says.
Phase: 1
Type: CAPTURE
Subtype:
Result: ALLOW
Config:
Additional Information:
MAC Access list
Phase: 2
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 3
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 0.0.0.0 0.0.0.0 Outside
Result:
input-interface: Outside
input-status: up
input-line-status: up
output-interface: Outside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (nat-no-xlate-to-pat-pool) Connection to PAT address without pre-existing xlate
Before, using a regular Static PAT on ASA Versions 8.2(5) below, I could get the deny logs (ASA-4-106023). Generally, I use these logs, and are quite important for us specially during auditing.
My question is how can I generate logs for these type of dropped traffic on the ASA 9.1 Version?
Any comments/suggestions are gladly appreciated :)
Regards,
John

I believe, but am not 100% sure, that the reason you are not seeing the ACL drop but a no NAT matched is because of the changes from 8.2 to 8.3 in the order of how things are done. In 8.3 and later you need to secify the real IP address when allowing packets in, and this is because NAT happens before the ACL is matched. So since there is no match on the NAT the packet is dropped then and there, never reaching the stage where ACLs are checked.
As to seeing drops in the ACL log...You might want to try adding an ACL that matches the NATed IP...but I don't think you will have much success with that either. My guess is that there is no way around this...at least no way I know of.
Please remember to select a correct answer and rate helpful posts

Few errror/doubts in Primary and Standby server - Need Help

Hi All,
I am having below doubts/errors. I need help to solve all the below questions.
I configured Dataguard successfully. Now the sync is upto date using the below parameters (using 11g):
at primary:
log_archive_dest_1=
log_archive_dest_2='SERVICE=standby.123 arch'
standby_file_management=auto
at sandby:
log_archive_dest_1=
standby_file_management=auto
Still i face below messages in the alertliog. Can anybody clearly explain me all the points.
Primary:
ORA-1652: unable to extend temp segment by 640 in tablespace NEWTEMP
I get this error when my archvie destination got filled up, later we released the enough space, the archived are generating. Still i see this message once in between. Need to solve this.
Primary:
Checkpoint not complete ( i see this message very often, want to get rid of this)
standby:
kcrrvslf: active RFS archival for log thread 1 sequence (sometimes i see this KCRRVSLF)
standby:
check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is defined to a value that is sufficiently large enough to maintain afequate log switch information to resolve archivelog gaps. (also get this message in between the alertlog file in standby)
Standby:
FAL[client]: Error fetching gap sequence, no FAL server specified (this is very often message. How to remove this, what needs to be added. Do i need to add the below parameters)
FAL_CLIENT
FAL_SERVER
Thanks in advance.
Pas Moh
[email protected]

Pas Moh wrote:
Hi All,
I am having below doubts/errors. I need help to solve all the below questions.
I configured Dataguard successfully. Now the sync is upto date using the below parameters (using 11g):
at primary:
log_archive_dest_1=
log_archive_dest_2='SERVICE=standby.123 arch'
standby_file_management=auto
at sandby:
log_archive_dest_1=
standby_file_management=auto
Still i face below messages in the alertliog. Can anybody clearly explain me all the points.
Primary:
ORA-1652: unable to extend temp segment by 640 in tablespace NEWTEMP
I get this error when my archvie destination got filled up, later we released the enough space, the archived are generating. Still i see this message once in between. Need to solve this.This error has absolutely nothing to do with the handling of archive logs, the status of archivelog destination, or primary/standby. Any relation you thought you saw was pure coincidence.
>
>
Primary:
Checkpoint not complete ( i see this message very often, want to get rid of this)
Here is the very first hit I got when I googled "oracle checkpoint not complete". Tom says it better than I would have.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:69012348056
standby:
kcrrvslf: active RFS archival for log thread 1 sequence (sometimes i see this KCRRVSLF)
A quick google of that one, and it looks like it is not even an error, but rather simply an informative
>
standby:
check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is defined to a value that is sufficiently large enough to maintain afequate log switch information to resolve archivelog gaps. (also get this message in between the alertlog file in standby)
In that case I would check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is defined to a value that is sufficiently large enough to maintain adequate log switch information to resolve archivelog gaps.
How big is that? Well, at least bigger than it is now. Beyond that, it would have to be "large enough to maintain adequate log switch information to resolve archivelog gaps" Just play with it until you get the result you want.
>
Standby:
FAL[client]: Error fetching gap sequence, no FAL server specified (this is very often message. How to remove this, what needs to be added. Do i need to add the below parameters)
FAL_CLIENT
FAL_SERVER
Thanks in advance.
Pas Moh
[email protected]

I have EMS 3.5 installed and functioning. Need help with where to go next!

Hello All,
I am brand new to this and need a very basic push in the right direction.
I have FMS 3.5 installed on my server and I am ready to begin testing with it.
My website has a page with descriptions of videos and links to those videos.
When a link is selected, I want a new page to open and the video to play in the FMS player.
I have absolutely no idea how to go about this. I need some meaty information here. I read tom Green's tutorials, and although I found that they were informative, they are also quite general.
I have Flash Professional CS4 and I just need to know what the heck to do next.
Any and all help will be supremely appreciated.
Sincerely,
wordman

Gentlemen,
Thank you for the answers, I will definitely look into what you both suggested.
My next step is getting a player into a separate page that plays selected videos through RTMP.
The player that comes with FMS would be fine, but I do not know how to alter it, change colors, etc.
Then I was looking into Real Eyes' REOPS player, and the white papers alone stopped me in my tracks. I realize it's probably easy, but now ehrn you are a novice, to understand it.
Then I saw Adobe Strobe, the OSMF-based player and thought that might be good for me.
The biggest problem I see is that Adobe's resources are not always easy to find on this website, same goes fo rthe OSMF site. Not very well structured sites for a software company.
Bottom line is, I need to get a player on a page that plays though RTMP. Any thoughts there? I'm completely new to Flash.
Thank you all!!!
Sincerely,
wordman

On my MacBook Pro I forgot my user password and I didn't enable Apple ID recoveries and I urgently need help finding a way to recover the password.

I urgently require help in recovering my user password for my MacBook Pro on OS X Lion, I forgot my password and Apple ID recoveries aren't enabled and I can't enable them as I don't know my password and my hint didn't help me at all, I really, really need help!

Also, a solution may be found if you search in the "More Like This" section over in the right column.Solution may be found if you search in the "More Like This" section over in the right column.

Bought yearly subscription for Tech suite, unable to down load and installl/activate -need help-Vanita

Hi there,
I have bought yearly subscription for Tech suite which expires in May 2015, however I am unable to download or install/activate it. I am paying monthly however cant use it!
need help- Is there an email or phone number I can reach ---
Thanks
-Vanita

BobLevine wrote:
[....] If you find something out, please do come back and update us.
Thanks for your willingness to help, but I got some great news!!!
I finally managed to find the cause for that deactivation problem. It's called the "Update Root Certificates" component, which somehow was unchecked on my machine. Although I had previously installed the Adobe HTTPS (SSL) certificate for secure connections between my computer and Adobe servers, used while signing in on my account, each time I had to click YES to confirm manually that this certificate was valid and safe.
Now, while deactivating from an application, such confirmation is not displayed and therefore the application considers a certificate (and thus connection as well) as invalid or unsafe. The result is: "Internet Not Found... Unable to Connect..." message.
Here's what I did to fix it:
1. clicked Start, and then pointed to Settings and then clicked Control Panel
2. double-clicked Add or Remove Programs
3. clicked Add/Remove Windows Components (on the left)
4. scrolled down the list of components to Update Root Certificates, and checked the check box for that component
5. clicked Next, and followed the instructions to complete the Windows Components Wizard.
After turning that on, the deactivation was almost like a blink of an eye.
So if anyone has a similar problem, make sure you have that system component turned on.
Matt

Security Questions and Rescue Email "need help"

The AppStore won't let me purchase anything and it keeps asking for my security question but I donn't remember it and the rescue email is not the one I choosed. Please somebody help I just added money to the account too need help A.S.A.P.

You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106703)

Dynamic Forms and Flowing subforms -- Need help/Advice

Hello All -
I am creating a form for instructors at our college to complete. It has 3 pages, some static text, some required drop-down boxes, and three "comment" type areas which I would like to create so that they "flow" and display the entire contents when printed.
I've read everything I could find so far, but I think I am missing something quite basic.
I've created master pages, with a content subform on each one. I've placed all my content into subforms under that main content subform, named and ordered them the way they need to be. Most of it should appear as positioned. Only where there is one of the comment sections do I want/need the "flow content" option.
I tried following the directions I found in another thread. If I set the subform with the comment area to flow, then I never get the page break option (and it is needed) - it's always grayed out. When I try to set the underlying subform on the page to 'flow content', ALL of the content from all three pages ends up on one page, everything on top of each other.
What am I doing wrong?
Can anyone give me some tips as to where at least to start looking for what I've not done or done wrong?
Thanks in advance for any information -- it will be soooo appreciated!
Lauren

Hi Lauren,
You only need one Master page, and there's no need to put anything on it unless you want a header/footer that repeats on each page.
If you want to have things flow from page to page, create one body page object, and set its content type to Flowed (the body page is itself a subform). In it you put subforms with text, fields, and so on in them. Since your form will spill from page to page based on how much text the instructors type into the expandable comments fields, break up the forms content into sections (subforms) such that the layout can break between the subforms without taking away from the readability. These subforms should have a content type of Position. Even though there's only one body page object in your design, since you have three pages worth of stuff, it will spill onto three pages.
Now for the comments fields, which you want to wrap and expand. Make sure that each of your comments fields is in its own subform. Set the field to allow multiple lines and, in the layout tab, click the box to Expand to Fit (height). For the subform that contains the comments field, set the height to auto-fit (layout tab). Also for the subforms that contain comments fields, experiment with the "Allow Page Breaks Within Content" checkbox on the Subform tab. If you expect an instructor to blab on for more than an entire page of text, you will have to select this box, but otherwise I suggest leaving it unselected so that the entire comment remains together.
Jared Langdon
www.jlangdon.ca

Problems with IOS 7.0.4 and ipad 2 need help

Need help with problems caused by downloading IOS 7.0.4 onto my ipad2

To answer, we'll need to know what problems you're having.

ReDeploying Portal Content - Need Help Plz.

Hello All,
Is there is way to redeploy all Portal Content. All of a sudden the Links and Iview in the my Portal are not working it keep saying that it cannot find the iViews and the Application is missing, can some one please help me with this.
Best Wishes,
John.
Message was edited by: John Bray

Hi John,
if you have a backup of your portal server file system you could restore from the backup the ...\irj\root\WEB-INF\deployment directory (with subfolder) and remove from every PAR-File the .bak extension.
By that all PARs will be deployed on the next server startup.
If the PCD content (iViews,Pages,etc) is missing, you need to restore the DB or you could import a transport package from another server.
Hope this helps,
Robert

Authschemes and portal / iviews - need help

Similar Messages

Maybe you are looking for