Issue setting up iview - Need help

Hi,
I'm setting up an iview to surface a SAP BW report through SAP NetWeaver 7.0 (2004s)
I've tested the iview with the following value in the "BEx Web Application Query String" property of the iview
and am able to view my BW report in the portal iview as expected
CMD=LDOC&TEMPLATE_ID=Z_CCA_UK_FIB_OPEX_TOTAL&VAR_NAME_1=ZPERRESP&VAR_VALUE_EXT_1=W123456
I now want to use a variable so that the VAR_VALUE_EXT_1 property of the url is generated at runtime
The VAR_VALUE_EXT_1 property is the user's login id (which must be uppercased for the BW report) so my url now becomes
CMD=LDOC&TEMPLATE_ID=Z_CCA_UK_FIB_OPEX_TOTAL&VAR_NAME_1=ZPERRESP&VAR_VALUE_EXT_1=<User.userID[UPR_CASE]>
The above however fails to give me a report.
On debugging the url at the report end I can see that
&VAR_VALUE_EXT_1=<User.userID[UPR_CASE]> is being presented to the report rather than the user's actual login id
being substituted at run time as expected
I'm using the information here
http://help.sap.com/saphelp_nw04/helpdata/en/36/5e3842134bad04e10000000a1550b0/frameset.htm
as a guide but am unable to get my report to work with the runtime url parameter substitution
Has anyone come across this before and have a solution?
Thanks in advance
Krishna

Hello,
     It sounds like you have almost everything set up but the vlan tagging on the ports. You will need to have inter-vlan routing disable which it seems like you have already done (enabling this feature will allow vlans to talk to one another). You may need to take a screen shoot of how everything is set up under L2 switch. Make sure all the ports are set to untagged and set to access port, you will need to put VLAN 1 on ports 1 and 2 and VLAN 2 on ports 3 and 4. As long as all the ports are set to access ports and untagged you should be fine at this point.
If you are still having issues take some screen shoots so we can check and see how it is set up.
Edit: while looking at the admin guide I see they are not called access ports. Guess its been a while since I've checked out a RVS4000.
Hope that helps!
Thanks,
Clayton Sill

Similar Messages

  • Serious Issue with Linkage..Need help ASAP!

    OK, I have big deadline for Monday and I can't figure this
    out. I have a bunch of movieclips that are set up with linkage for
    actionscript and set to export in first frame. Everything was fine
    and dandy for a week. Now all of a sudden Flash hangs when I try to
    export the swf. If I turn off the export in first frame everything
    is fine. The problem then is that my move clips aren't available
    for the attachmovie call. What I don't understand is why it was
    fine, then all of a sudden this happened for no apparent reason.
    Has anyone got a workaround or solution for this? I need help with
    this ASAP. Thanks.
    --Paul

    Sadly nothing you can do. The file must be corrupted.
    sometimes files that need saving corrupt themselves (product of
    voltage variations or some other physical things) making some
    objects "BAD", maybe you can save your work if you determine what
    is the only object that is corrupting all the file and delete and
    and redraw it.

  • 2 issues with my phone need help !!

    I am having problems with my app store, when I am downloading an app it is always stuck on 92% that's 1 issue,  my second issue is my messages when I send a message it keeps saying sending I don't know why. I need help with these 2 issues Please & Thank You

    What phone?

  • Blank page in iview - need help

    Hi All,
    I really need your expertise..Actually, I've issue with my users, where few of them encountered missing page in their iView. I tried to to find 'user setting option'  but unfortunately, it gave nothing..only windows option,i.e, print, view source code, properties and so on.and amazingly there was no error message,it just give them an empty screen,no header,no subview, etc.
    Wondering is there any place,where i can restore their missing page or iview..It only happened to some people, and i believe they accidentally clicked on 'Remove Page' Option
    FYI, Am using NETWEAVER 7.0
    Thanks in advance guys
    Regards
    RJ

    Hi,
    Check:
    system admin -> support -> Portal Content directory there is a Personalization cleanup
    Refer:
    Cleaning Up Personalization
    iView works when previewed but is blanked when assigned to a role/page.
    Regards,
    Anagha

  • RVS4000 Private networking, setting up VLANs need help!

    Hello,
    I live in a two family residential house and we share a common fibre connection to the internet. In the basement we have a modem/router(zyxel) which is in "bridge mode".  Therefore not acting as DHCP.
    Behind this zyxel we have a Cisco RVS4000 router. Ports 1 and 2 go to family A, and Ports 3 and 4 go to family B.
    Family A and B have separate routers which are both set to "access point mode". Family A has an ASUS RT-N66U router while family B has a dlink DIR-615. The asus has an "access point mode" while the dlink needs to be set up manually to achieve this. The dlink must also have a static IP adress. The asus can receive ip adress.
    What I have unsuccessfully tried to achieve and am currently begging for help with is to separate the networks so that both families can access internett, but at the same time it must be impossible to access VLAN1(Family A) from VLAN2(Family B) vice versa. Meaning no communication between the two families through the local network.
    I have tried different options but I am not sure how to deal with trunk, tagged, untagged etc. etc. etc. It seems every time I manage to create two different networks there is still accessability/communication between the two VLANs and everytime I manage to give out different IP adresses to different ports i.e. 192.168.10.xx and 192.168.2.xx it is still possible to communicate. What also usually happens is that the internetconnection is severed at the same time.
    Could anyone be so kind as to help me out? Since I am quite unseasoned in networking I need a step-by-step guide stating every action I need to take. If possible also with illustrations.
    Any help will be much appreciated.

    Hello,
         It sounds like you have almost everything set up but the vlan tagging on the ports. You will need to have inter-vlan routing disable which it seems like you have already done (enabling this feature will allow vlans to talk to one another). You may need to take a screen shoot of how everything is set up under L2 switch. Make sure all the ports are set to untagged and set to access port, you will need to put VLAN 1 on ports 1 and 2 and VLAN 2 on ports 3 and 4. As long as all the ports are set to access ports and untagged you should be fine at this point.
    If you are still having issues take some screen shoots so we can check and see how it is set up.
    Edit: while looking at the admin guide I see they are not called access ports. Guess its been a while since I've checked out a RVS4000.
    Hope that helps!
    Thanks,
    Clayton Sill

  • Issue with GREP.  Need help to solve it pls...

    Hi,
    I have set a GREP as follow:
    Paragraph style: numbered + capital letters
    GREP:  \(.+?\) so that everything between () is written italic.
    When the list of ingredients is too long, I need to go to the next line (shift + enter).  Then it is like if the GREP gets broken...
    I have tried to put a \n but it doesn't work...
    Going crazy here
    Can anyone help?
    Thank you so m uch!

    Solution found...
    FYI here is the correct grep: \(.+\)

  • Authschemes and portal / iviews - need help

    I am aware that when I logon to the SAP portal, normally due to authschemes.xml configuration the default authscheme is used to authenticate the user (which uses the ticket auth template). I am interested to know if it is possible to configure the portal so that by entering a different url, I can use a new iview, and the iview will specify a non-default authscheme. This would allow me to logon using one method by entering the normal portal login URL and by another auth method by entering a different URL.
    From what I understand about iviews (not much) I think this is possible, but I don't know for sure, and how to make it work. Can you help ?
    Regards,
    Tim

    Patrick,
    Sorry, but I am now very confused. I was under the impression that authschemes were configured in authschemes.xml and available for use in any J2EE authentication requirement, not just for portals. I have seen references before to using authschemes for non-portal login, and can see nothing which is portal specific.
    My understanding of what you said before is :
    1. user accesses portal
    2. portal login page redirects to our servlet, which may ask the user some questions or give them options before deciding what type of authentication to use.
    3. our servlet triggers the authentication via UME API
    4. The auth stack is processed based on the authscheme name given in UME API, and CreateTicketLoginModule will be used to issue an SSO2 ticket for SSO purposes.
    5. The servlet will then redirect back to the portal page and the SSO2 ticket in browser will allow the logon to complete.
    Is the above what you were suggesting, or if not, can you help me understand where I am getting this confused/wrong ?
    The part we are having problems with is step 3 where we are unable to pass the authscheme we want to use as a parameter.
    Thanks,
    Tim

  • T60 - College Issued Laptop - Graduated and Need Help

    Here is the situation:
    I graduated from my college, who issued me my T60 laptop.  When ever I had a problem with the laptop I would bring it to the help desk and they would solve my problem.
    I want to re-image my laptop to the way it was when I graduated after they did the "senior checkout" on my laptop.  This senior checkout removed all the software that was licensed for the college for student use.  It left me with Windows XP and Microsoft Office 2007 along with the other bells and whistles (CD Burner, Outlook, DVD Player).  Before I left, I purchased some CD's through the student computing program they had.  These CD's are for Windows XP and Office 2007.  My brother bought a T60 laptop (not through a college program) and his came with a recovery disk.  I was not issued a recovery disk when I graduated.
    So how can I re-image my laptop now that I dont have the support from the colleges help desk?
    If you think you can help and need more information I will be glad to provide it. 
    Thanks.

    I believe my graphics card is a little better, it may be the same type with more RAM but I have to check.  I will post the odel numbers as soon as I can find them.  Where are they located on the machine?
    A friend of mine who worked at the schools helpdesk suggested that I take my copy of windows XP and reboot with that to do a reimage.  The only problem I see with that is that it would install the operating system but then my "thinkvantage" button probably wouldn't work and I would also be concerned about my wireless card.
    I will get to those model numbers as soon as possible.  Thanks for all your help so far.

  • Issue with corrupted document, need Help !

    Dear all,
    In our company we use daily Indesign 7.5 (cs 5.5 package) and when we export the .ind document to .pdf the system crash.
    Above this the original document (.ind) is corrupted and we're not able to open thedocument.
    We loosed a lot of work and we're not able to restore de document.
    When we try to open the corrupted document this message appear :
    Can somebody help me?
    Thx and have a nice day.

    Thank you, yes, we at Markzware can try to help with your corrupt InDesign documents, for sure.
    From as far as we can see when dealing with the odd corrupt InDesign file from time to time, is that it comes down to three main reasons why these InDesign documents have issues:
    Font(s)
    Image(s)
    PowerOutage or Forced Stopped
    Fonts can indeed be a corrupt font itself, but also corrupt, over-loaded or otherwise odd-balled font caches. Here is a video on how to clear font caches in InDesign and although for a Mac in this video, I think you'll get the idea on how to do that on a PC as well:
    One highly corrupted image can ruin the show for your entire file. Check all images individually till you find the bad one and remove that. Also, more times then I can count, InDesign users drag-and-drop images from a web browser while visiting a web page, right into an InDesign layout. That is a big no-no. Not saying your are doing that, but just covering what can happen in the images category and a bad InDesign file.
    As for the odd power outage, well that is something maybe Tesla could have helped us with, but until a time when we are not dependant on AC/DC currents, it will remain a sore point. Power in your cases is likely not the issue though.
    Always report issues like these to Adobe though. They can also often help and if not right away, at least they may gather important details to help stop that type of corruption in the future.
    If all else fails and as mentioned, we as Markzware can help try and fix your files - Bad InDesign or Quark File Recovery Service
    Friendly Regards,
    David
    Markzware

  • HT203993 How do I make a new iCloud i have one set up but need help deleting it

    i have an Apple ID and I know the password. I had set up an iCloud account but I put the wrong email.. So now I don't know how to delete it because I don't know the password please somebody help me

    https://iforgot.apple.com/appleid
    If you forgot your Apple ID password - Apple Support
    Contact Apple for help with Apple ID account security
    https://ssl.apple.com/emea/support/itunes/contact.html
    (988)

  • Having an issue with GoLive - I need help!?!

    I need to figure out how to "reset" setting on Adobe Go Live (CS2).
    The other day all of a sudden, I lost all of the 'preview pane' buttons.  It has layout and source still, but the two preview (pdf and regular) are missing.  Also - all of the images are still there in the source and when you view the html in a browser, but in the main screen - all of the images now show a "broken image" icon. 
    What happened and how do I fix?
    Thanks in advance.

    *Im wondering if theres a way get the song information on the library, rather than having to go through and to have to type every artist and title?*
    Are you importing commercial CDs or CD-Rs? If they are ones you made yourself the track names will be seen as Track 01, Track 02 etc. and the information has to be keyed in again by hand. For commercial CDs, you have to connect to the internet as iTunes picks up the track information from an online database. It will do this automatically if you are connected while you are importing or you can do it afterwards by connecting to the internet, highlighting the tracks and going to Advanced>Get CD Track names:
    iTunes for Windows - I don't see the names of songs
    How iTunes remembers Audio CDs

  • Issues with N80. Need help badly!!

    I got my N80 as a gift a week ago. It was purchased in dubai ( which is in the middle east). 2 days ago i transferred some files from my phone to the computer and ever since the next morning my phones been acting weird. applications close, its slow, battery life is really bad (like 5 hours), my signal bar and batter life bar disappear for a while and the phone powers off by itself. Today I removed the memory card and tried the phone and it seems to be working fine now and I am not having any issues. I am assuming and hoping that the card got affected when i was uploading the files from my phone and that there is no problem with the phone. I have been advised to send the phone back to the middle east to get it checked and possibly repaired. this is something I dont want to do at the moment because i like the phone and it will be a long time before i get it back. My question is if anyone else has had a similar problem, is it the memory card that is faulty and should I just get a new card or should I actually send the phone back to get it checked totally, in case its the phone that is faulty? also I have read that a new firmware is out. Can i get that off the net or it has to be uploaded at a local service centre ( which unfortunately is in the middle east again and not in Canada where I am at the moment)? The firmware on my phone is V 3.0617.0.6 and was updated on 03-05-06 RM-92 Nokia N80 (08). Is this firmware ok for now as I will be going to the middle east in december and can get it done then. Or should i just send the phone now and get the firmware updated and also get the memory card problem sorted out?

    07-Sep-2006
    07:07 AM
    manta wrote:
    I have not experienced similar behaviour, but if you connected phone via cable to a PC and used the data transfer mode to move the files to PC, that equals to mass storage mode that shows the memory card as expernal memory in Windows Explorer and it is important to remove the phone then safely using the remove harware option in Windows, di dyou do that ?
    If not, the memory card can get corrupted and corrupted memory card can mak the phone behave badly.
    I would just go and buy a new memory card and then when connecting to PC always use the safe removal before disconnecing the phone.
    Or install PC Suite, the´connection method is different and no safe removal needed.
    I did use PC suite while transferring the files which makes it even more weirder. But yes i did not do that safely remove hardware thing. I thought that it wouldnt be needed since im using PC suite. do u have any idea about the firmware? should i get it updated now back in dubai or wait till i go back myself in december?

  • Major issues after Lion update - need help fast (please!)

    Following instructions learned on this discussion board I attempted to do a clean install of FCP X & Lion on a wiped drive.  I first cloned my main (Mac) drive onto another internal drive, then wiped the original Mac drive clean.  Next, I installed Lion on that drive and then was stymied at the Migration Assistant as it only gave the option to transfer ALL apps, and not specify which of those I would like to transfer.  I was under the impression that FCP 7 and FCP X should not reside on the same drive.  Therefore I manually copied all but the "FCP Studio" folder back onto the main drive and then used the Migration assistant to transfer all the rest of the files.  Trouble is that I now somehow have 2 user accounts, and they are both acting very differently:
    - In the new user account FCP X opens with almost all files intact yet there is no audio and since Aperture doesn't appear on this account there are no stills in my project(s).
    - In the old (orginal) user account FCP X opens with nothing more than my project names visible, yet Aperture (and all other apps) ARE visible on this account
    My questions are as follows:
    1. Is there a way to combine these accounts?
    2. How do I recover audio files (these are primarily V/O tracks and Smart Sound music tracks)
    3. Is there some other workaround or re-do that I should do?
    Thanks in advance!

    You might  want to post the user account issue in the Lion discussion group. Sounds like you created a user account when you installed Lion and then moved over a user account, which is why you have two accounts.
    I believe you can work around this, but it would be best to get advice from a Lion OS X expert. Hence the other discussion group.

  • Exporting issues...urgently need help!!

    Hi there,
    I'm relatively new at this! Trying to export my flash thing into a flash movie. Its mostly just shapes and text plus one jpg and some transitions in between. When I export, the transitions are missing and also random bits of text (part of the text box will be there, but then one word is missing).
    Any ideas?
    Im desperate! It's for a university assignment that I have to hand in tommorrow!! EEK!!
    Thanks

    If you are using dynamic textfields you need to embed the font into them so that they show up properly when animating or masking them.

  • Struggling to set up. Need help with pairing Apple TV and the remote. Any guidance, other than holding down the Menu and R buttons?

    I am using Ethernet cable to connect Apple TV. I have connected to Cable TV box as directed by cable provider. I have connected the HDMI cable from TV back to the Apple TV box. Power cord is connected. What am I doing wrong? Remote and Apple TV are not connecting....

    Thanks for sending the link.....unfortunately we are a home without wireless...My phone and iPad use 3G and our TV and Mac computers are connected via Ethernet ....
    That said, my new Apple TV is using Ethernet and I cannot use the app without wireless.
    Thanks for your effort to assist!

Maybe you are looking for