Problems with IOS 7.0.4 and ipad 2 need help

Need help with problems caused by downloading IOS 7.0.4 onto my ipad2

To answer, we'll need to know what problems you're having.

Similar Messages

WiFi problem with iOS 7.0.3 and iPhone 5

My iPhone 5 has been working flawlessly with iOS6. After updating it to iOS 7 I have an irritating problem with the WiFi connection at work. Everything is OK for some time, then the WiFi connection just stops working. There is a WiFi icon max signal strength icon but there's just no connection. There are usually no error messages. Safari would just spin the connectivity icon forever with nothing showing on the screen. Facebook won't load anything, etc. Unfortunately the phone won't fallback to cellular. I have to either reset it, or restart it. Sometimes just diabling-enabling WiFi works, sometimes not.
I've read a lot about this problem, it seems to be very common on 4S, however it seems I am alone to have it on 5. I've tried all the suggested solution - reset my network settings, I have even reinstalled my iPhone as a new one and not from my iOS6 backup. It doesn't help.
Note that the problem is not in our WiFi network since my iPad 3 works perfectly and has connectivity at the same time.
Having in mind this is very widespread issue on iPhone 4S which is still not fixed even in version 7.0.3, I am kind of exhausted. I've been a loyal Apple fan but if this doesn't get fix in the next iOS 7 update, I'll probably look other brands finally. It's really such a shame!

You are not alone i am having same issue on my i5 ios7.0.3 but apple is still not responding on the issue several sites and even apple discussion forum is filled with this issue no major fix or trick works as what apple says in its help. waiting for apple to respond on this isuue

PROBLEMS WITH IOS 4.2.1 ON IPAD - WHY NOT UPGRADE TO IOS 4.2.1

Hello anyone!
I recently updated to 4.2..that's great! Multitasking,folders, blablabla....
I'm asking why the iPad is so cool??
1.BATTERY.
2.3G always with you.
3.Mobility.
4.Loud spiker.
Sow I recently updated and it looks like the battery lasts only 4 hours.
Apple need to update the battery time of 10 h to 4!!
3G right? 7.2 MB/sec?? I tested my network speed on 3G 5 bars with "speed test" app for iphone, it resoult that the downloading speed is only 1MB/sec.
Faster is the public network of my city that I thinked that is very slow!
No battery no mobility!
On the old spiker I could listen the music in my room and in the entaery room the sound was loud! Now with 4.2 the spiker of my iPhone is louder then my ipad!!
I spend 700€ for what?
I want downgrade! Ok, the multitasking is great but for me the most important "why buy an iPad" is the battery!
Whay is it doing that with the internet speed??
Why my battery lasts 60% less??
Why my spiker is 50% lower sound??
Apple need to do new update to fix that, if this is the price to have multitasking, I want downgrade!
What you think?Do you have the same problems?

-to solve tge battery draining problem make sure you have no running apps in multitasking bar, when clicking home button twice you will see apps you have opened down there , keep your finger pressed on any of them for 3 seconds you'll see them "dancing" with a small minus code up in the left, just click the minus to exit the apps, plus switch off wifi/bluetooth/3G when you're not using the ipad to save battery from draining, that should fix the thing, i suppose.
Another thing, iOs 4.2 came with a badly slow internet and contains several bugs that making some app crashing and damaging colors of some of the apps, for example "run fast" app colors are horribly damaged.
4.2 has nothing special for me except multitasking, which is i dont call it a real multitasking, and whats making thinga worse Apple doesnt provide any official steps to downgrade their obvious "terrible" 4.2 ios, which is totally annoying.

Please help with iOS 7.1.1 and iPad Mini

We loved our iPad mini until we accepted the upgrade to iOS 7. Since upgrading and now most recently to 7.1.1, the applications are jerky -- games are not usable -- and there seems to be a 'phantom' touching controls when we're not. Is there anyway to downgrade? Is there some setting/feature in 7.x we can shut off that's interfering with the interface?
Very sad Apple doesn't take Quality Control more seriously -- we pay a premium price for their products. Thinking about maybe getting the Nokia Windows tablet.

You can't downgrade iOS levels.
Your problem may not be related to iOS 7 or 7.1.1.
I haven't seen the sort of problems that you are reporting on my iPad.
The "phantom touching" touching sounds like your iPad may have developed a hardware problem with the touch screen. If you are using a screen protector remove it to see if that helps. If the problem persists contact Apple Support or visit an Apple store for an evaluation.

I am having iPod touch 4g with ios 6.1.3 and can you please help me in BBM install when I click on install button it says that you need GPS please help me To install my BBM

Apple inc. can you please help me to install BBM in iPod touch 4g

BBM is only compatible with devices that have cellular/GPS radios. The iPod does not have these.
The BBM app says:
Compatibility: Requires iOS 6.0 or later. Compatible with iPhone, iPad 2 Wi-Fi + 3G, iPad Wi-Fi + Cellular (3rd generation), iPad Wi-Fi + Cellular (4th generation), iPad mini Wi-Fi + Cellular, iPad Air Wi-Fi + Cellular, and iPad mini with Retina display Wi-Fi + Cellular. This app is optimized for iPhone 5.
https://itunes.apple.com/us/app/id690046600?mt=8

HP Envy 15 Graphics Problem with Windows 8.1 (Intel and NVidia Graphics). Help!

I bought an HP ENVY TouchSmart 15-j013ea about 6 months ago and I have had a major problem with the graphics that I cannot seem to solve. I think it started when I updated to Windows 8.1, even though I am not 100% certain.
I have noticed the following three problems, and I think they are related:
Some windows (such as Chrome, Skype, or even Device Manager or other windows) are very blurry compared to others.
The firefox menu window has some deformed black arrows instead of the normal ones.
When playing a game (specifically, Star Wars the Force Unleashed 2), after a while I get an error that the computer has ran out of memory. However, according to task manager, only about 50% is in use, not to mention that I have 8 GB of RAM + 2 GB graphics memory. At the same time, the computer gets rather loud (like a fan working overtime) and hot.
The laptop has both Intel and NVidia graphics, and both are enabled in Device Manager. To be honest, I have no idea which is used when, or how to check that (let me know if there is a way)
I have tried the following without success:
Uninstalling the Intel graphics driver from device manager and installing a version I downloaded from the HP website for my laptop and OS. After that, Windows would NOT BOOT, and I had to do a system restore.
Uninstalling the Intel graphics from Programs and Features, and installing 2 different versions from the Intel website. Nothing changed.
Updating Nvidia driver through GeForce Experience. Nothing changed.
Updating Intel drivers from Windows Update. Nothing changed.
Quite frankly I am not sure what the problem could be, since the graphics versions are supposed to be compatible with WIndows 8.1. I also don't get why some windows are blurry and others are not. I am thinking the computer uses only the Intel graphics and not the Nvidia (at least in the blurry windows), but even if that was the case (and it shouldn't be), I don't think I should be having this problem.
At this point, I really need help. My graphics details are:
Intel HD Graphics 4600: Driver version: 10.18.10.3412
NVidia GeForce GT 740M: Driver version: 335.23
NVidia GeForce Experience version: 1.8.2
I am attaching screenshots that show driver details and the problems.
Thank you.
Blurry Chrome:
Firefox menu problem:
Device Manager and driver windows are also blurry, both graphics are shown

I had a similar problem with a Dell laptop. I found the problem was the laptop wanted to switch between the Intel and NYIDIA video cards. It would switch to the Intel when high graphics was not required then to the NIVIDIA when high graphics was required. The laptop does this to save power when high graphics is not required but it caused problems with some applications, specifically high graphics games.
For me the solution was to disable the Intel graphics processor. You can do this by right clicking on your Wallpaper, select the NIVIDIA Control Panel, then select Set Physx Configuration. You will see a dropdown box labeled Select Physx Processor. It is set to Auto by default. This allows the switching I described. Select this dropdown box and select your NIVIDIA processor. This will prevent the laptop from switching and force it to use your NVIDIA processor exclusively.
Hope this helps.
Sacto Fred
Owner and CEO
H&O PC Soultions

Problems with Syncing Photos between ITunes and iPad

Dear Mac Users,
1. I have been syncing Ipad and my MacBook Pro using I Tunes a lot.
2. My storage habits are Standard so all files are imported using iTunes and all in Pictures Folder, important using ITunes.
3. Recently i add new Photo event to sync, it does optimization shows me total number of files, start copying and then stops and here is a message comes up:
''The IPad cannot be synced. The required file can not be found"
4.Files are there , I see them both on IPhoto and on Disk.
Can you help with resolving this issue.
Thanks in Advance,
Alkhas

I assume it is a POP account. Each individual device should have the setting for what to do with an email when it's (automatically) downloaded: in Mail it's in Preferences>Accounts>Advanced:
If it's not checked, mail will be left on the server indefinitely. If it's checked and the drop-down menu set to remove mail immediately that's what will happen; or you have a choice of how long before it's removed. The removal takes place when you check mail, I don't know whether iOS devices have the same setting or where it is.
You can see that if it's set differently on different devices you may get confusing results. I would suggest setting to one month on all devices, if you can, so that each has a chance to access the emails.
Just to prevent confusion: iCloud email does not work like this.

Problems with ios 7.1.1. on ipad?

I have downloaded ios 7.1.1. for my iphone 4s and it works ok. then i tried to download it on my ipad but i cant grt it installed. And My i pad is loosing power and it
shut down many times without warning . I dont undestand this because the update is not installed only downloaded. Any one who knows something ?

I would try connecting the iPad to the computer and starting it in recovery mode. The following link will explain everything.
http://support.apple.com/kb/ht1808

Problem with new update on iPhone and ipad

I keep getting "unable to connect please check your internet connection" clearly if I can post here means that I have internet connection

There is a bug for iOS 6 and the latest version of Reader. The engineers are aware of the problem, and will have a fix soon.

Cpi-files - problem to open in Mac osx and FCP. Need help

I have camera Sony Hdr-sr1 and i have problem becouse mac osx don't see films from my camera, it is PCI files. FCP don't see it either.
Can i do something?

the SR1 shoots AVCHD in HD mode and MPEG2 in SD ... the AVCHD you can import (and transcode) via Log and Transfer with FCP 6.0.1 or later, the MPEG2 you need to transcode yourself prior to import (you can use the free MOEG Streamclip app to do this: choose Export to Quicktime and set the Compressor to DV/DVCPRO - NTSC)

Problems with Tomcat Server : Does not respond (Sometimes) - Plz Need Help

I have a web application running on Tomcat 4.1.31. (SUN/Solaris)
Clients access through iPlanet Web Proxy (SUN/Solaris).
Theres a class that build a generic form (it return html codes) then it's affected in the JSP page :
MyClass class = new MyClass();
<%= class.getHtmlCode() %>
the size of the form is variable (100Ko to 1,5Mo)
When i m using the proxy, sometimes the server does not respond when he do the affectation <%= class.getHtmlCode() %>.
If i call the page without proxy it work.
The problem seem not depending of the size of the form. Without proxy it always work. And with proxy sometimes the server does not work.
Please need help

Originally Posted by scum
Hey All,
Need some help with ZDM7 PXE preboot services.
Currently running a netware 6.5 server in VLAN1
PXE client sitting in VLAN2.
DHCP Server is running on VLAN3
IPHelper is running
DTS.ini, PDHCP.ini and TFTP.ini are unmodified.
I have had networks put an IPHelper in place and my client successfully picks up an IP address. The screen displays the "BOOT SERVER IP" correctly and the clients IP details are correct.
I watch the top of the screen where the Timeout counts down and eventually gives this error.
"Error: The server did not respond as requested in time
ZENworks shutting down...
Press any key to continue..."
This happens on every machine i have tested. If i hold down the Ctrl+Alt keys, then the imaging menu appears, i can select maintenance and the client will pull down the initrd, etc.. fine.
if i disable the IPHelper, move the client to the same VLAN as the server, then the whole process works perfectly.
not sure where to go from here.
help please ;)
leon
Hi Leon,
If you are getting the ZENworks menu when holding down the Ctrl-Alt keys, PXE/PDHCP seems to be doing the right thing. Routing issues also don't seem the case as you can pull down the first PXE boot files....
The server running PXE, I assume it also runs the TFTP and Imaging services?
These services are also running a recent version of Zen 7 (IR3/IR4)? A little more info on these components and what server they are on would be good :)
Cheers,
Willem

Problem with GRANT syntax in MYSQL statement...need help!

Good afternoon all!
I need a little help with some mysql syntax. I'm using version 4.0.17, and I'm just starting to try to learn about connection pooling (you'll probably see future posts from me on this topic as well:)...
I'm following the directions contained on Apache's website (http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html) on how to set up a JNDI datasource.....
The directions are simple, Create a new test user, a new database and a single test table. Your MySQL user must have a password assigned. The driver will fail if you try to connect with an empty password.
I then proceed to enter this line into my mysql prompt - mysql> GRANT ALL PRIVILEGES ON *.* TO javauser@localhost IDENTIFIED BY 'javadude' WITH GRANT OPTION;
Here's the error I get : ERROR 1045: Access denied for user: '@localhost' (Using password: NO)
Can someone give me the heads up on what the "correct" syntax is?

tnguyen1973 , I tried your statement again, this time excluding the -p, pressed Enter and then entered the statement I first posted, and it took that too.
So I'm hoping I can now continue with the example provided on the Apache website.
Can you tell me the difference between using the -p in the statement, and where I can learn more about these things?
Thanks.

Problems with toplink in a ROLAP application - please , I need help

Hello,
I am not too much experieced with toplink but I want use it for building a ROLAP (relational OLAP) client (something like Discoverer Plus) . Because of an database bug , Oracle Warehouse Builder can not generate materialized views creation scripts that help in agregation . This bug wiil be eliminated in 11gR2 database . OWB generate these materialized views creation scripts in a clob column of database but these scripts is not valid. These scripts can be extracts from database , corect and run .
This ROLAP-enabled schema is a star schema (a fact table in center sourounded by dimensions tables , with FK in these tables) generated by OWB . It does not have a PK associated with fact table.
Because of this fact , when I try to generate a status report of map associttiaded with tables from schema , I receive this
Descriptor SalesCube -> No primary keys specified in SSB.SALES_CUBE table.
Discoverer Plus does not complain about this PK missing, but it knows fact tables does not have PK .
Please give an ideea,
TIA.
Aurel

I am using jdeveloper 10.1.3.1 and I get the following error :
Exception [TOPLINK-6044] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.QueryException Exception Description: The primary key read from the row [DatabaseRecord( ORG_DIM_V.FARMACIE_NUME_FARMACIE => Titan 1 => 357142.3)] during the execution of the query was detected to be null. Primary keys must not contain null. Query: ReadAllQuery(app5.model.OrgDimV); nested exception is: Exception [TOPLINK-6044] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.QueryException Exception Description: The primary key read from the row [DatabaseRecord( ORG_DIM_V.FARMACIE_NUME_FARMACIE => Titan 1 => 357142.3)] during the execution of the query was detected to be null. Primary keys must not contain null. Query: ReadAllQuery(app5.model.OrgDimV)
and ,of course, I have a primary key , but on the column ORG_DIM_V.DIMENSION_KEY .
ORG_DIM_V is o view on the table ORG_DIM and I build PK with this two statements:
ALTER VIEW SSB.ORG_DIM_V ADD CONSTRAINT org_dim_v_pk PRIMARY KEY (DIMENSION_KEY) disable novalidate
ALTER VIEW SSB.ORG_DIM_V MODIFY CONSTRAINT org_dim_v_pk RELY
What's happining?
Many thanks,
Aurel

It's now over 6 weeks since I made the mistake of updating my iPad and I am furious and frustrated at the lack of a solution to the problem with ios 5 audio app missing lyrics

It’s now over 6 weeks since I made the mistake of updating my iPad and I am furious and frustrated at the lack of a solution to the problem with ios 5.
I recently updated to ios 5.1 but nothing has been done to rectify the audio app problems ie lyrics no longer shown,
I am extremely disappointed and angrywith those responsible for the iOS 5 update, in regard to the way it hasaffected the music app in my iPad.
I also own an iPhone 4, am an avid Apple fan, and up until now have beenextremely pleased with the devices, and have sung their praises to friends andassociates.
I am a professional musician, and purchased an iPad primarily to use with theperformance of my music.
The changes made to the music app affected my performances over the weekendextremely adversely – limiting my repertoire and causing confusion and delays.
I have spent many hours talking withApple helpline assistants (who, incidentally have been very good and have triedto help), and I have also spent a lot of time on this letter.
I greatly regret updating to iOS 5.
There are two major problems with the music app.
1. Lyrics no longer displayed
2. Layout, and appearance and consequently performance have seriouslyregressed.
I have a repertoire of around 500 song backing tracks, organised into about 20playlists, half of which featured lyrics / chords that I have spent monthsrecently entering into iTunes so that they could be used on my iPad.
These were working fine up until the update - now they are gone.
Previously, the app featured large icons for playlist, artists, songs etc. atbottom of page: Now there are small, grey, indistinct barely legible buttons.
Previously, when playlist icon was selected - all the playlists were listedclearly in order on the left hand side in black on white (as in iTunes).
Now they are scattered across the whole page in large squares (displayingnothing if there is no album art).
The identifying wording below eachsquare is now small, grey, indistinct & barely legible.
Previously, when a playlist was selected - the songs were displayed in adescending list in black & white: now they appear as small, grey indistinct & barely legible.
Previously, when a song was selected - it appeared filling the page, and withaudio controls clearly positioned at top of screen. One tap would bring uplyrics.
Now audio controls appear at top once again small, grey, indistinct &barely legible.
A small square representsalbum art which if tapped fills page. A further tap fails to bring up lyrics.
Don Wilson

Lyrics aren't supported in the Music app on iOS 5 on the iPad. These are user-to-user forums, they are not monitored by Apple (there are too many forums/threads/messages for that to happen). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/ipad.html

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

If nothing else works, you might try this one. It has worked for many others ...
Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414
Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
iPad 2 and iOS 8.0.2 Problems
For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
Here's one person's solution which will help a lot of iPad 2 users!
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

Problems with IOS 7.0.4 and ipad 2 need help

Similar Messages

Maybe you are looking for