Auto close of video floating frame after play is complete

I'm using pdf floating frames for video play to allow easier viewing. How do I make the floating frame close after the video play is complete.

Delon,
> Frame 1 = Dynamic still photo
> Frame 2 = dynamic flv with small video
The syntax you use depends on how you're displaying that
video. If
you're using the FLVPlayback component, for example, you'll
have to consult
the FLVPlayback class in the help docs. If you're using a
Video object
(which collaborates with the NetConnection and NetStream
classes), you'll
have to consult the NetStream class.
In either case, you'll want to write an event handler
triggered by the
completion of your video, and that event handler should send
the playhead
back to frame one with gotoAndStop().
Here's a quick blog entry with suggested solutions for a
number of ways
to play video in Flash:
http://www.quip.net/blog/2007/flash/actionscript-20/how-to-determine-completion-of-flv
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

Similar Messages

  • Why is the video dropping frames after export?

    http://vimeo.com/65108558
    The video in question is in the above link. I am using PP CS5 with a new iMac i7 32gb cuda enabled. When watching the clips in the timeline everything looks normal. This video was encoded to h.264 max render quality with the vbr at 50.
    There has to be an issue with the export settings, as to why my exports looks like this. Any one who can help out would be greatly appreciated.

    May 2, 2013 2:02 PM 1st message 32 minutes later 2nd message May 2, 2013 2:34 PM
    This is a user to user forum, so it may very well take more than 32 minutes for some other user to try and help
    I am on Windows, so can't really help... you may need to wait for a Mac person

  • Auto Repeat a Video

    Hi,
    Is there a way to auto repeat a video when it  finishs playing in QuickTime Player?
    Thanks
    QuickTime Version 10.1 (501.22)

    Souad H wrote:
    Hi,
    Is there a way to auto repeat a video when it  finishs playing in QuickTime Player?
    Thanks
    QuickTime Version 10.1 (501.22)
    Yes, if you have the QuickTime Pro key activated you can select 'Loop' from the view menu in QuickTime player. Even if you don't have the QuickTime Pro key (which you have to buy) you can still do this by writing an AppleScript which tells the player to open and loop playing the file.
    See my previous reply to a similar request here https://discussions.apple.com/thread/3314746?start=0&tstart=0

  • Auto close after playing a trailer?

    The title says my question: Can I set Quicktime to close automaticallyl after a trailer plays? I don't see a setting for that, so I presume not.

    The QuickTime Player isn't open when you view most movies embedded in a Web page. Only the browser plug-in is in use.
    If the page code is set to "target" the QuickTime Player then the file will open in QT. It is up to the authors to decide what the file does when the movie is finished.
    QuickTime Pro can set some "Presentation" features that include auto close and auto quit. These properties travel with the file.
    I set some of my Presentation movies to auto quit the player when the file is finished.
    Doesn't Control-Q quit the open app?

  • Pinwheel when trying to close safari/firefox after playing video

    i've only noticed this on the nytimes.com website after playing their video content (youtube works fine). in both firefox and safari: every single time i play a video, if i pause it or stop it and then try to close the tab it is in or the application, i get the pinwheel and no matter how long i wait for it, it does not come back so i force quit. i've tried updating/reinstalling, but nothing seems to work. also episodes/shows via abc.com do not play at all - tried reinstalling/updating those plugins/apps as well. this is happening on both macbook pro and macbook with updated versions of leopard... thoughts?

    This seemed to come out of the blue, very much as described by anima42. I also am a Ubuntu 10.04 user. I have pondered on the first reply above, and though I don't, and didn't, use Tabberwocky, I was using Tab Mix Plus. Having removed this, the problem seems to have gone away. Another possible clue as to what went wrong: I use a constant Firefox profile located in my home directory. I dabbled with Ubuntu 11.04 a week or so ago, which runs (I think) a more updated Firefox. This Firefox was operating on my default profile, as you would. It may have broken something so it now doesn't play nicely with the 10.04 setup. Just surmising.

  • Spotify Desktop on Windows freezes consistently after playing a specific video ad

    Hi, I'd like to report the following issue: DescriptionSpotify Desktop on Windows freezes consistently after playing a specific video ad (screenshot attached). This still happens after a reinstall. Please note that the UI is usable just fine. I can close the ad, browse playlists etc. but since the ad "haven't finished" it's not possible to play anything.This is happening on two devices (workstation and laptop), both running Windows 8.1. A more detailed description, using numbered steps1. Play any tracks2. Video ad comes in and plays without issues3. After 15 seconds it freezes and it's not possible to re-play4. Need to restart Spotify  What I expected to happenResuming normal playback, or at least getting the next ad :) What actually happenedAd playback - and hence the whole playback - frozen. My iPad/iPhone modelNot using mobile Device’s Operating SystemWIndows 8.1 Is your device jailbroken?n/a Approximately how many playlists do you have?~15 My mobile Spotify versionn/a My desktop Spotify version (if applicable)Spotify Free 1.0.7.157.g2a6526f9 My provider and countryUsing a fiber optics connection, Slovakia  

    i have this problem too. and when i restart spotify after listening one song the ad is there again....

  • My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.

    My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.  When I "Preview In Browser" through Edge it plays (I have created a shape and used the "play video full screen" snippet)  in full screen mode just fine.  When I "Preview Site In Browser" through Muse and click on the shape to PLAY VIDEO FULL SCREEN, it does nothing.  I am new to both programs and can't figure out why it will work out of the preview window in Edge and won't work when I publish to Muse.  Does anybody have an answer or a work-around for me?

    Hi Watch this video,
    If this is what you need, you can get it here [[zazaalaza's]].mulib - Google Drive

  • Adobe Reader no longer Auto-Closes after printing

    My company uses software that allows for users to reprint invoices they have previously made.  The way the procedure is supposed to work is: the driver clicks a re-print button, Adobe Reader opens up with the document, prints it, then closes.  Within the past couple of weeks however, everything is fine however Adobe Reader will not close out.  The PDF document itself closes, but the user is then brought to the main menu where they can open up another PDF.  The problem this is causing is that they cannot reprint other invoices until manually closing out of Adobe reader every time.  There have not been any updates made to the software they are using, or to Adobe Reader.  We have users on both Windows XP and 7, and have the issue with both Reader v10 and 11.
    Any suggestions on how I might be able to get Adobe Reader to auto-close again?  I am also checking with the software vendor for their insight.

    Might be difficult to fix.
    You don't know what changes to your system/registry have been made by the virus infection you told of.
    Maybe this article has some useful hints for you.
    http://blogs.adobe.com/dmcmahon/2009/04/12/acrobatreader-acrobat-fail-to-load-its-core-dll -error-after-installation/

  • I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the

    I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play at all. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the !&%$#@ Where did my original video files go?

    Sounds like a good plan, you can never be to safe and having a second External HD is safer than one.
    The only thing that I would do different, is setup the 3T as my TimeMachine Backup and then erase and move my Photos, Videos and perhaps even iTunes Media to the 1T. That way you will have room to backup both the Internal Hard Drive and the 1T External Hard Drive to the 3T using TimeMachine.
    Take your time, study and use the > Time Machine - Frequently Asked Questions if you get stuck or aren't sure how to make the move.
    Also see > iPhoto: How to move the Library folder to a new location
    iMovie ’08: Storing or moving your video library to an external hard disk
    and >  iTunes for Mac: Moving your iTunes Media folder

  • Monitor won't enter power save after playing You Tube videos...

    Hi
    An issue has  developed on my system in the last couple of months for which, after having done  a lot of research and testing, a solution has not been found. After playing  a video in You Tube, my monitor won't go into power save mode after the  prescribed time. It tries to go off for a second and the screen goes blank but  then comes straight on again. This happens after playing the You Tube videos in  Firefox, Google Chrome and Internet Explorer. I am running Windows XP  Professional and I have the latest version of Adobe Flashplayer installed,  the latest graphics card drivers, the latest version of direct x 9.0c.
    To clear this error, I have to go into my XP  power schemes settings and change it to another power scheme and then change it  back to my default power scheme. However, as soon as I play another you tube  video the same problem re-occurs.
    I have tried turning off hardware acceleration but this makes no difference. My graphics card is a Gigabyte gv-nx86t512h: http://uk.gigabyte.com/products/product-page.aspx?pid=2604#ov
    This never used to happen  until recently. It seems that there is something with the Flashplayer that is  not compatible with Firefox, Chrome, Internet Explorer etc.
    Any ideas as to what may be  causing this and what can be done to overcome it would be greatly appreciated as  it is a real nuisance.
    Many  thanks.
    D

    thanks for your suggestions.
    i found the solution/workaround from somone else on the adobe forums:
    Go to control  panel, display, screen saver, choose a random screen saver, set a long time  (i.e. 60 min, but always longer than your monitor shut off time), then select no  screen saver, and save! Simple as that…

  • Video clips won't play back after capture

    I am a long-time user of Premiere Elements, currently using version 9.0. I am capturing video clips from the same videocamera that I've used in previous versions of PE. My video clips won't play back after I capture them. The clip is in my "media" area, but when I try to play it back, the audio plays but the picture remains frozen on the starting image. What is happening?

    It is a Sony Handycam DCR-HC28, mini DV, using a firewire connection.
    Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. As far as how fast my processor is, I looked on my invoice and it says, "Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
    I defragmented my hard drive before beginning and have 779 GB or 83 percent free space on hard drive.
    I have not placed my video clips on the timeline yet so don't know if there is a red line on top, indicating it hasn't been rendered. I merely wanted to play back my clip to set "in" and "out" points. This has never happened before in my long history of using Premiere Elements. Would prefer not to have to go back to PE 8, as that was a disaster.

  • Movie after playing doesn't stop at the last frame.

    Movie after playing doesn't stop at the last frame but goes back to frame one. Movie stops normaly when played on iMac but makes trouble when placed in the iBooks Author. That's not eve problem of looping (repeat none). Help, this makes me mad.

    laura4life
    You have fragments (leftovers) beyond the end of the Timeline content that you intended.
    I am going from an Elements Windows workspace, so please translate into Mac accordingly.
    Expand your Timeline content to the maximum with the Zoom Out Zoom In slider above the Timeline.
    Press the End key of the computer keyboard. That should take the Timeline Indicator to the fragments which must be deleted.
    Explore all the tracks in that area.
    Repeat the End key press until the Timeline Indicator stops at the end of the intended Timeline and not some 3 hours afterward.
    What you find at "end of track" could be fragments or files that you moved out of the way of the active project and forgot were there.
    The fragments typically present as thin vertical black lines scattered about the tracks.
    Please let us know the outcome.
    Thank you.
    ATR

  • Freezes after playing video playlist

    My 60G freezes after playing my video playlist. I have to wait until the battery runs down then plug it in to reboot it for it to work again. I took it back to Best Buy where I purchased it, and they installed the latest update. They claimed this would fix the problem. Wrong! Any suggestions?
    Thanks!

    There is no screen event triggered when the video finishes playing that you can use to jump to the next slide or unhide a button to enable the user to navigate forward at a time of their own choosing.
    If you know the duration of the video, you can place a navigation button on the timeline at that point so that it appears just after the video finishes playing.  However, you may find that on different PCs with different system specs the video may take slightly more or less time to play.

  • Auto-close after signature?

    I would like to know if it's possible to auto-close a document after signing and saving.  I've been having an issue at the company with two (or more) people having a document open for electronic signature at once, and of course only one of them can save at a time.  If a document could close automatically after signature, this problem would greatly be reduced.
    If there is a code that allows auto-closing the file after the signature save prompt and the person signs, I would love to know about it.
    Is this possible?
    Win XP, LS 8.2, Acrobat Professional 9.4

    Ok tried that, and get the message, "Object contains a feature not supported by target version"
    The Report log says,  "Target Version does not support PostSign event".

  • Ipod 4.3.1 : after playing a video, i couldn't get the replay button, instead of that i get black screen fully

    ipod 4.3.1 : after playing a video, i couldn't get the replay button, instead of that i get black screen fully

    Have you tried resetting your iPod: Nothing will be lost:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

Maybe you are looking for