Auto configuration messages

Hello,
I'm trying to use the automatic configuration messages feature of Nokia website, configuring web/email/mms of a new phone. It seems that from Italy access to the service is not possible (since long ago, weeks). Why?
Thanks!

Hi stefanoco
How come you can't get them from your network provider?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Auto-reply messages not working in pidgin [SOLVED]

I am not sure if this a configuration issue, but my custom auto-reply messages in pidgin are not popping up when someone messages me. I added myself to my buddy list to trouble shoot and I noticed that the message doesn't appear at all next to my status like it should. I just see 'away'. Any help is appreciated.
Last edited by vytalelementz (2008-07-03 03:28:36)

Hmm...I guess I'm stuck oh well. People that message me will have to deal with it when no auto-reply is sent back.

Does Mac OS X Server 10.6 Auto Configure a Connected Airport Basestation?

I just finished an install of Snow Leopard Server on a new Mac Mini. A 1TB Airport Time Capsule is directly connected to the Mini via Ethernet (and our cable internet modem is also directly connected via Ethernet to the Time Capsule).
I have a static IP address.
During the installation of the server onto the Mini there seemed to be a period during which the server took control of the Airport device and auto-configured it then reset it. At first, it seemed that all services were available externally (i.e. web) from the internet.
However, I may have been wrong as now none of the services respond from outside the network.
I thought that Mac OS X Server would automatically configure an attached Airport device. Is that correct? Or must I work through the Airport device and manually configure all of the port settings to enable external access?

First off I would check the console and see what it says when you try to log in with the admin account. It will give a message saying what the issue is.
Also is this a local admin or a network admin account?

Can't get mobile device to auto configure the active sync server

Hello
I am trying to get my costumer mobile devices to auto configure the active sync server name so they don't have to type it in. I believe I have everything in place Certificates are fine. I populated the external url on the active sync
object in Exchange.
DNS is set up correct. I ran the Exchange Connectivity Analyzer and it runs perfectly. The only test step if fails on is the first attempt to contact the autodiscover service using just the domain name and that is because we have a
record in DNS so our domain name points to our public web server but all the other tests run fine. At the end, it even displays the xml file contents and shows me the external url of the active sync object.
I get a successful run but it first shows SSL certifiate of our public Web site and then hangs on the server config and then prompts me to enter in the server name and domain. My external url in Exchange looks like this:
https://remote.domain.com/Microsoft-Server-ActiveSync
Any Help??
Eddie

Thank you for replaying but there is already internal A record that points to Exchange server. Firewall, DNS external and internal are setup like this:
Firewall:
Port 443 and 25 points to Internal IP of our Exchange 2013 (only mail server in company).
Port 80 not open.
External DNS records:
autodiscover.mydomain.com à points to our WAN IP
remote.mydomain.com à points to our WAN IP
mydomain.com à points to external online webhosting
Internal DNS records:
autodiscover.mydomain.com à points to ours Exchange 2013 internal IP
Remote.mydomain.com à points to ours Exchange 2013 internal IP
mydomain.com à points to external online webhosting
Test form "ExchangeConnectivityTest.com" is Successful but with warnings.
Warnings are about https://mydomain.com/AutoDiscover/AutoDiscover.XML
because
https://mydomain.com is
pointing to website, which is hosted externally.
Eddie

How to configure message archieving in PI 7.1 / 7.11 ?

Hi,
I would like to configure message archieving in PI 7.11. Please advise on the any document / help that explain the step.
Thank You and Best Regards
Fernand Lesmana

The following guide explaing the step-by step procedure-
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/402fae48-0601-0010-3088-85c46a236f50&overridelayout=true
Also, the following links/notes might be usefull-
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID1506029250DB00994126813914143097End?blog=/pub/wlg/12811
Note 836092 - Archiving/deleting work items in the XI
Note 872388 - Troubleshooting Archiving and Deletion in XI 3.0 / PI 7.0
I think there is no difference in archival setup procedure with PI7.1 and its same as it is in PI7.0

Integrated Configuration - Message in error shown in SXI_MONITOR?

Hi,
We have some messages in error for an integrated configuration (PI 7.1 EHP1)
Those message are shown in SXI_MONITOR. (SXMB_MONI)
Is this a normal behavior..?
We did just deploy the new ICO, could this be a cache issue?
Regards,
Martin

It was my comprenhension that Integrated Configuration message, successfull or in error, would be shown only in RWB.
Since we do see some error message in SXMB_MONI that are from an Integrated Configuration, I was confused.
I will try clearing the cache and see if we still see message in the abap stack.

Configuring Message archiving

Hi,
while configuration of XI 3.0
for the step <b> Configuring Message Archiving for the Adapter Engine and the PCK</b>
on the URL http://<host>:<port>/DataArchivingService/DAS
when we click on the link like "Configure Archive Store "under Administration gives following error
<b> Details: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Error getting Naming on Server in getInitialContext operation
</b>
can some one help in this matter.
Thanks
Regards
Deepti

the problem is the Exclusive = Yes indicator in the access sequence.
Your other message has this exclusive indicator as well.
so if the first message is found, then no other message wil be determined
to allow several messages in one PO, you must not set this exlusive indicator

Auto Configure not prompting for credentials

Hi Folks,
I've a problem where users of Outlook on XenApp cannot configure an email profile. It just times out. I access the same XenApp server/user account from a Published Desktop or RDP the profile configures fine.
The Outlook Auto Configuration tool works identically in both scenarios except for the last step. On the Published Desktop I am prompted for domain credentials and then sent the Autodiscover XML file. However, over a XenApp session Auto Configuration never
prompts for login details, although the log say differently, and the attempt fails.
I turned on Outlook logging and captured Autodiscover logs for both scenarios (identifying information is changed to NWTraders)
Log of Autodiscover failure over a XenApp session
11676 0x0073AF1C
02/05/15 13:13:07 Autodiscover to https://mail.nwtraders.com/autodiscover/autodiscover.xml starting 11676
0x0073B22A 02/05/15 13:13:08
GetLastError=0; httpStatus=401. 11676
0x0073B22A 02/05/15 13:13:08
AutoDiscover disabled auth schemes: 11676
0x0073B22A 02/05/15 13:13:08
<NONE> 11676
0x0073B22A 02/05/15 13:13:08
AutoDiscover supported auth schemes: 11676
0x0073B22A 02/05/15 13:13:08
Negotiate 11676 0x0073B22A
02/05/15 13:13:08 NTLM 11676
0x0073B22A 02/05/15 13:13:08
Basic 11676 0x0073B22A
02/05/15 13:13:08 AutoDiscover attempting Auto-Negotiate with Desktop Credentials. 11676
0x0073B22A 02/05/15 13:13:08
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073B22A 02/05/15 13:13:08
Negotiate 11676 0x0073B258
02/05/15 13:13:08 GetLastError=0; httpStatus=401. 11676
0x0073B258 02/05/15 13:13:08
AutoDiscover attempting NTLM with Desktop Credentials. 11676
0x0073B258 02/05/15 13:13:08
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073B258 02/05/15 13:13:08
NTLM 11676 0x0073B287
02/05/15 13:13:08 GetLastError=0; httpStatus=401. 11676
0x0073B287 02/05/15 13:13:08
AutoDiscover attempting supplied Credentials. 11676
0x0073B287 02/05/15 13:13:08
[email protected] 11676
0x0073B287 02/05/15 13:13:08
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073B287 02/05/15 13:13:08
Negotiate 11676 0x0073C563
02/05/15 13:13:13 GetLastError=0; httpStatus=401. 11676
0x0073C563 02/05/15 13:13:13
AutoDiscover attempting Basic auth with the Supplied Credentials. 11676
0x0073C563 02/05/15 13:13:13
[email protected] 11676
0x0073C563 02/05/15 13:13:13
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073C563 02/05/15 13:13:13
Basic 11676 0x0073CE7C
02/05/15 13:13:15 GetLastError=0; httpStatus=401. 11676
0x0073CE9B 02/05/15 13:13:15
AutoDiscover attempting AutoDiscover Credentials. 11676
0x0073CE9B 02/05/15 13:13:15
[email protected] 11676
0x0073CE9B 02/05/15 13:13:15
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073CE9B 02/05/15 13:13:15
Negotiate 11676 0x0073D84F
02/05/15 13:13:17 GetLastError=0; httpStatus=401. 11676
0x0073D85F 02/05/15 13:13:17
AutoDiscover attempting AutoDiscover Credentials. 11676
0x0073D85F 02/05/15 13:13:17
[email protected] 11676
0x0073D86E 02/05/15 13:13:17
AutoDiscover USING pcreds->dwAuthScheme: 11676
0x0073D86E 02/05/15 13:13:17
Negotiate 11676 0x0073E204
02/05/15 13:13:20 GetLastError=0; httpStatus=401. 11676
0x0073E204 02/05/15 13:13:20
AutoDiscover prompting for Exchange credentials. 11676
0x0073E213 02/05/15 13:13:20
Autodiscover to https://mail.nwtraders.com/autodiscover/autodiscover.xml Failed (0x80040113) 11676
0x0073E213 02/05/15 13:13:20
AutoDiscover Warning: ExcludeHttpRedirect is ON. 11676
0x0073E213 02/05/15 13:13:20
AutoDiscover Warning: ExcludeSrvRecord is ON. 11676
0x0073E213 02/05/15 13:13:20
AUTODISCOVER GET SETTINGS END 11676
0x0073E213 02/05/15 13:13:20
Log of Autodiscover success over Published Desktop (works same over RDP)
02/05/15 13:11:40 Autodiscover to https://mail.nwtraders.com/autodiscover/autodiscover.xml starting 12244
0x00725EBF 02/05/15 13:11:41
GetLastError=0; httpStatus=401. 12244
0x00725EBF 02/05/15 13:11:41
AutoDiscover disabled auth schemes: 12244
0x00725EBF 02/05/15 13:11:41
<NONE> 12244
0x00725EBF 02/05/15 13:11:41
AutoDiscover supported auth schemes: 12244
0x00725EBF 02/05/15 13:11:41
Negotiate 12244 0x00725EBF
02/05/15 13:11:41 NTLM 12244
0x00725EBF 02/05/15 13:11:41
Basic 12244 0x00725EBF
02/05/15 13:11:41 AutoDiscover attempting Auto-Negotiate with Desktop Credentials. 12244
0x00725EBF 02/05/15 13:11:41
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x00725EBF 02/05/15 13:11:41
Negotiate 12244 0x00725EEE
02/05/15 13:11:41 GetLastError=0; httpStatus=401. 12244
0x00725EEE 02/05/15 13:11:41
AutoDiscover attempting NTLM with Desktop Credentials. 12244
0x00725EEE 02/05/15 13:11:41
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x00725EEE 02/05/15 13:11:41
NTLM 12244 0x00725F1D
02/05/15 13:11:41 GetLastError=0; httpStatus=401. 12244
0x00725F2C 02/05/15 13:11:41
AutoDiscover attempting supplied Credentials. 12244
0x00725F2C 02/05/15 13:11:41
[email protected] 12244
0x00725F2C 02/05/15 13:11:41
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x00725F2C 02/05/15 13:11:41
Negotiate 12244 0x0072719B
02/05/15 13:11:46 GetLastError=0; httpStatus=401. 12244
0x007271AB 02/05/15 13:11:46
AutoDiscover attempting Basic auth with the Supplied Credentials. 12244
0x007271AB 02/05/15 13:11:46
[email protected] 12244
0x007271AB 02/05/15 13:11:46
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x007271AB 02/05/15 13:11:46
Basic 12244 0x00727AC3
02/05/15 13:11:48 GetLastError=0; httpStatus=401. 12244
0x00727AF2 02/05/15 13:11:48
AutoDiscover attempting AutoDiscover Credentials. 12244
0x00727AF2 02/05/15 13:11:48
[email protected] 12244
0x00727AF2 02/05/15 13:11:48
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x00727AF2 02/05/15 13:11:48
Negotiate 12244 0x007285CF
02/05/15 13:11:51 GetLastError=0; httpStatus=401. 12244
0x007285EE 02/05/15 13:11:51
AutoDiscover attempting AutoDiscover Credentials. 12244
0x007285EE 02/05/15 13:11:51
[email protected] 12244
0x007285EE 02/05/15 13:11:51
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x007285EE 02/05/15 13:11:51
Negotiate 12244 0x00728F93
02/05/15 13:11:53 GetLastError=0; httpStatus=401.12244
0x00728F93 02/05/15 13:11:53
AutoDiscover prompting for Exchange credentials. 12244
0x0072B25D 02/05/15 13:12:02
corpNWTraders\jsmith 12244
0x0072B25D 02/05/15 13:12:02
AutoDiscover USING pcreds->dwAuthScheme: 12244
0x0072B25D 02/05/15 13:12:02
Negotiate 12244 0x0072BB95
02/05/15 13:12:05 GetLastError=0; httpStatus=200. 12244
0x0072BB95 02/05/15 13:12:05
Autodiscover XML Received
12244 ---BEGIN XML---
I have the Autodiscover methods which use Active Directory turned off because the Exchange service is not on my domain or a Trusted domain. So we are relying on the HTTPS method only
11588 0x00404E76
02/05/15 12:17:01 AutoDiscover Warning: ExcludeScpLookup is ON.
11588 0x00404E76
02/05/15 12:17:01 AutoDiscover Warning: ExcludeHttpsRootDomain is ON.
11588 0x00404E76
02/05/15 12:17:01 AutoDiscover Warning: ExcludeHttpsAutoDiscoverDomain is ON.
Regards - Mic

Hi,
Based on the information you provided, the issue was caused by an Autodiscover failure. To troubleshoot the issue, I suggest you post the question in Exchange forum:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Is there pre-configured message mapping for SRM Content?

Hi,
My requirement is to do a message mapping between the SRM Message "Purchase Order Request" and the R/3 Idoc Orders01. Is there a preconfigured message mapping in SRM content or will I have to do it?
I see the generated proxy class from the outbound message interfacePurchaseOrderRequest_Out which will carry the message to XI and my requirement is to map it to the Interface ORDRSP.Orders01 Please let me know if there is a pre-configured message mapping for this ? or is the message mapping between the message "Purchase Order Request" and the R/3 IDOC ORDERS01 to be done by the developer himself?

HI,
There are mappings available in the predelivered SRM content from SAP.
Did you import the SRM content into the repository? If so , you can find this.
www.service.sap.com/ibc -> Integrated Business Content for mySAP SRM->
Hope this helps,
Rgds,
Moorthy
Message was edited by:
Krishna Moorthy P

Auto Packing Message Type

Hello All,
I got a requirement for Auto-packing in outbound delivery via IDOC process.
Can anybody through some light on the above requirement in finding Message type, process code and so on...
your every suggestion or hint will help me to fulfill the requirement.
Thanks in advance.
Best Regards
Suresh.

Hi,
Auto Packing message type: SDPACK
Process code: SDPA
Basic type: SDPAID01
Regards
Suresh.

Configure messaging server and MTA on different machine

Is there anyways to install / configure messaging server and MTA on different machine? I am using Sun One Messaging server 6.0
Thanks
Haris

Thanks for the reply, How MTA can be disabled on the
messaging server? how can i disable the store on the
MTA machine, Is there any documentation for it?Yes, the documentation helps you. You cannot totally disable the MTA. If you did, how would you get mail to the store?
Also
is it possible to use some another machine for
webmail?Well, um, kind of. The webmail interface provided with Messaging Server interacts directly with the store, so you can't truly run that remotely, but .. .
You can install the server on a remote box, and turn on "Messaging Express Multiplexor", a proxy for webmail. Users can then connect to the MEM box, and be forwarded to the store for their mails.
It should be possible to use a third-party webmail product that uses something like IMAP to talk to the store, too. that would be unsupported, but possible. Most users find MEM to be very good.
What problem are you trying to solve? Perhaps I can better help you if I know why you're asking these questions, and offer a better solution to you.
>
Thanks
Haris

How do I set up an Auto Away Message in the Mail program?

How do I set up an Auto Away Message in the Mail program?

You need a mail rule that sends a response to anyone who sends you an email.
Here's a link that shows how.
http://www.macobserver.com/tmo/answers/how-to-create-out-of-office-auto-email-re plies-with-os-x-mail

Auto-configure X and Desktop?

Hi,
Is it possible to auto-configure X and Desktop, from the install menu? From my install experience I think not, if such is the case, is this in the roadmap of development for the distribution?
Thanks,

Not from the Arch's install, the wiki is helpful for how to configure, especially the Beginner's Guide and you also might want to look at the Arch Way. If you really want an arch-like system that's pre-configured you might want to look into Chakra. It's still only an alpha installer, but it works reasonably well in my experience.

Creating an auto-reply message by command line

Hi,
Is it possible to create a an auto-reply message by command line? Need to create one but I have the users password and don't want to reset his password.
TIA,
Henry

Thanks Pterobyte.
I guess I did not search far enough back to find this. I did have to google en example of script. I've posted it below for future reference.
# This is a sample script for vacation rules.
# Read the comments following the pound/hash to find out
# what the script is doing.
# Make sure the vacation extension is used.
require "vacation";
# Define the script as a vacation script
vacation
# Send the vacation response to any given sender only once
# every seven days no matter how many messages are sent
# from that sender.
:days 7
#For every message sent to these addresses
:addresses ["[email protected]"]
# Make a message with the following subject
:subject "Out of Office Reply"
# And make the body of the message the following
"I'm out of the office for an extended period of time and will not have access to email. "
# End of Script

[Xperia Pro] Cant save configuration message after unlocking bootloader

Today i unlocked my bootloader using flashtool and it was successfully unlocked. Then i power on my phone. And all apps installed on m phone were gone( i knew that before). my internet settings were also gone. so i requested for connfiguration and got it. but when i tried to save it i got a message that "Configuration message could not be authenticated against your sim card. Message cannot be used to configure your phone". and i was unable to save it.
then i tried manual setting. this time browser showed that it could not connect through the proxy address. then i deleted the proxy address and kept the box empty. surprisingly this time it was able to connect. but stiil i cant link my gmail id with google play and cant use google play. why is this happening and what is the solution to this??

Hello Johan,
I am facing same issue of "Configuration message could not be authenticated against your sim card. Message cannot be used to configure your phone".
Using Sony Xperia Tipo Dual Sim in India.
On clicking configuration setting sent by my operator, I get this message. I also tried to add APN Manually but that too didn't work. Called customer care of service provider many times, however there support team is clueless.
Please help.
Neetu

Auto configuration messages

Similar Messages

Maybe you are looking for