Auto-detect/redirect script for JDK 1.6?

I work for a nonprofit organization and am in need of an auto-detect/redirect script. In order to hear the audio on specific pages, the computer needs to have JDK 1.6 installed on their computer. Is there a script I can insert in these pages so that if their computer does not have JDK1.6 installed, it will automatically give them a message that JDK 1.6 needs to be installed as well as a link to download it, if they want to hear the audio? If they do have JDK 1.6, there is an automatic redirect to go directly to the page they clicked to see and hear.
Thanks in advance for your time and consideration.
Rick Brown
HistoryBuff.com

When using -target it is best to also set the bootclasspath to include the JAR files of the release you are targetting. The compiler has found the new method taking an int in the newer JAR file and so compiled for that. If it was looking at the old class it wouldn't have found the (int) version so it would have generated the (double) version.

Similar Messages

Where can I read the proxy settings Firefox chose, when configured to use "Auto-detect proxy settings for this network"?

I would like to set my system network proxy settings to those, Firefox chose. Firefox is configured to use "Auto-detect proxy settings for this network" and this works fine. How can I read out the settings Firefox chose, so I can adapt these system?

Hello Richard,
Download MozBackup and make a backup of your bookmarks and passwords. Uninstall firefox and remove ALL folders with the name "Firefox".
Install Firefox and restore your bookmarks and passwords. Now you should have a fresh install so you have to make all settings again.

Auto-detect proxy settings for this network Not work with DHCP WPAD

My Network browsing Internet Through TMG The DHCP Configure To Deploy WPAD with configuration it's work good with IE 8,9 and Google Chrome, but don't work with firefox, I Tired search for the Solution for this problem but all Solution To fail.
the big problem is there are more PCs and laptops work with FireFox.And The laptops will be able to going out to another network with end users

Hi conectionist,
This is taken if there is a proxy set up in your network settings on your OS. If you would like to test there may be an add on:
*[https://addons.mozilla.org/en-US/firefox/addon/smart-ip-connection-info/?src=search]
Please feel free to search to find a better one if necessary.

How do "Auto-detect proxy settings for this network" and "Use system proxy settings" work behind the scenes?

How can I see what the proxy firefox actually uses when I check either of these two options?
Does it take it from Internet Explorer?
Are they stored somewhere in the registry?

Hi conectionist,
This is taken if there is a proxy set up in your network settings on your OS. If you would like to test there may be an add on:
*[https://addons.mozilla.org/en-US/firefox/addon/smart-ip-connection-info/?src=search]
Please feel free to search to find a better one if necessary.

V4, "Enable profile" no longer auto detects lens.

In V3 checking the "Enable Profile" box would detect the lens if a profile existed for it. In V4 I must specify "Make" before it auto detects. Is this a known issue?

Lens Auto-detection still works for me. Some lens correction settings might have gotten corrupted on your side.
The next time a lens fails to auto-detect, after you choose the make and the lens gets detected, select "Save new lens profile default" from the Setup box. From now on, the auto-detection for a similar camera/lens setup should work.

Data Service Auto-Detect Return Type Error

Hello,
I am not sure if I am posting in the correct area, as this is my first post in a long time. I have an error when trying to Auto-Detect Return Type for my Web Service Data Service. The error is 'Data type "Table_type" cannot be merged with the existing one in package "valueObjects" because the property "ContentID" does not match in case.' I have configured other return types the exact same way and have tried looking in the documentation for this error as well as searching on the internet. Any help would be welcomed, Thank You.
MSP

Nevermind, I figured it out. If anyone else has this similar error, it means you have another variable with the exact same name only capitilized in the same return type.

My Firefox always changes Network settings to 'Use Manual Proxy' after every PC restart, even if I change the option to No Proxy/Auto detect proxy.

My Firefox 4 always changes the Network settings to '''Manual Proxy Configuration''' after every PC restart. I have to always go to connections and change this setting to '''No Proxy''' or '''Auto Detect Proxy Settings for this network'''.
I also tried to revert the values back to default values by using about:config and changing modified values back to default. But it still doesn't works out.
Kindly help.
Thank you.

I had this too, I tried running Firefox in safe mode (no add ons) - that didn't make any difference. I could save other preferences, just not the proxy setting. I'm 99.99% sure I didn't have a virus or other malware. This was only affecting Firefox, no other browser I has installed.
In the end I created a new profile - http://support.mozilla.com/en-US/kb/Managing%20profiles - that seems to have 'fixed' it for me - the new profile doesn't have the problem, but the old one still does.
Windows 7, Firefox 4.01.
Cheers

IMac always auto detects for external monitors after waking from sleep or from display off

I've got a Dell 24" monitor (2408WFP) plugged into my mid 2011 iMac via DVI cord and thunderbolt attachment. Things work fine.
When I need to leave my computer, I usually turn the displays off using the shortcut keys: CTRL + SHIFT + EJECT
This works perfectly and both displays go black. However, when I return to my computer and reactivate the iMac, the iMac display will turn blue as if I have just plugged in a new monitor even the external monitor is still plugged in. It usually flashes blue twice before displaying the password prompt. I can usually just log back in as normal. I've never had this happen before using Snow Leopard. It's annoying but strange.
However, even more strange is that sometimes when returning to the desktop, the iMac will do the auto detect display thing and then when I log back in, the external display just shows static as if there is no signal. I've checked the cable a million times and everything is as tight as tight can be and both ends are plugged in properly. Unplugging the displayport adapter from the iMac and then reattaching it restores the desktop on the secondary display although sometimes, it results in the secondary display showing a gray background picture instead of my normal picture. Replugging the secondary display seems to fix that too although sometimes it doesn't.
Why is this happening?
- Problem with the adapter?
- Problem with the DVI cable I'm using?
- Compatibility issues with my external monitor?
I need to stress the point that this has never happened before with Snow Leopard.
If I am the only one experiencing this then I suppose it may be an issue with the iMac or adapter or even the cable. But if anyone else can shed light on this problem, I'd really appreciate it.

Hi Micheal,
I've been experiencing the exact same issue with my new iMac I just bought. I bought it refurb so I wasn't sure if it was a defect with the hardware or not. Since I'm not the only one I will asume it's not for now.
Setup:
- iMac 27-inch 3.4GHz (Release May 2011)
- Dell 2709W external monitor
- Hooked in with mini display port to DVI adapter
- Lion 10.7.3 all up to date to this day
From what I've been able to gather the issue presents itself only when my Dell 2709W enters "Power Save Mode" after I do CTRL + SHIFT + EJECT or when the diplays simply goes to sleep by themselves.
Although if I hit that combination and the displays goes to sleep but I don't wait long enough for my Dell monitor to actually "Power Save Mode" (wait like 2 sec) then touch the keyboard then the 2 displays (iMac and Dell) resumes from sleep without the issue presenting itself.
I'm tempted to buy the mini-display port to HDMI just to see if the issue is still present with that adapter. If I do I'll update my post with the outcome.
If anyone else has any info to help with this issue it would be greatly appreciated. It's very annoying when you resume from sleep and you find all of your windows that where opened on the external display before sleep squeezed into your main display (iMac).
Thanks!

Auto Email on event - EEM script for NxOS

I generated EEM script for Duplicate IP address detection, but i do not know how to trigger email in NxOS.
event manager environment emailto "[email protected]"
event manager applet Duplicate_IP
description "Detect Duplicate IP and Send Trap"
event syslog pattern "%ARP-2-DUP_SRC_IP"
action 1.0 snmp-trap strdata "Duplicate IP Detected on Host $hostname"
action 2.0 cli sh logg last 100
action 3.0 event-default
Somebody know how to trigger email. There is no good document on EEM email triggering mechanism.

Not sure if this would work in NxOS but I think it would go something like this;
Specify the action of sending a short e-mail when the EEM applet is triggered via the event syslog pattern you already have defined:
Router(config-applet)# action label mail server server-address to to-address from from-address subject subject body body-text
Remember to define the EEM environment variables first when setting up the applet as follows:
event manager environment _email_server
event manager environment _email_to
event manager environment _email_from

Everytime i open the firefox it shows me error "The proxy server is refusing connections" for this everytime i have to manually select the auto detect. I

This is happening from last one month. i set the proxy setting to auto-detect and it works fine. but then i close firefox and start it again shows me same error. so everytime i start firefox i have to change the setting to auto-detect.
Is there any permanent solution for it.?

HI
First of all are you using any proxy for internet access. If you do nat have a proxy, try to change the settings to No proxy.

Disable/Override Auto-detect for displays

i have a mini serving as the head for my media center. if i plug it into the HDTV via a DVI->HDMI cable it works just fine. detects the HDTV display options perfectly.
but what i would like to do is plug it into my receiver, where all the rest of my audio and video can go as well. that way i just have one video out to the tv for all my sources.
the problem is that when i plug it into the receiver i get generic display options on the mac (none of the HDTV resolutions) and the receiver doesn't know what to do with them. nothing is passed back out to the TV.
various cables, resolutions, and third-party software for playing with video output options have been tried. i'm hoping that, if there is a way to disable auto-detect for displays, i can output 720P/1080i as such and the receiver will recognize it and send it out to the TV.

Hi,
Thanks for posting your issue in the forum.
Regarding the current issue, I suggest we could refer to the following similar threads to disable Automatically detect settings via Group Policy. They may be useful to us.
Turn off Auto Detect Settings in IE using GPO
http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/cb6abb30-4360-4d3d-93fc-61823b2a5c20
IE LAN Settings: "Automatically detect settings"
http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/5a8a47fd-ab72-488c-bfad-d8c10d18b6be/
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.
Andy Qi
TechNet Community Support

Slow auto-detect times for PATA drive

Problem:
Very long auto-detect times for the PATA drive. During boot up, the system pauses at "auto-detecting" for this drive, for about 30 seconds. This is by far the longest period in my entire boot process. Occassionally the drive is not found at all, and I cannot boot. When I go into the BIOS, it's identified correctly. This is my OS/apps drive (the SATA drive is solely for audio and video). Any ideas? Also, is there a way I can get my system running in Native mode without losing the DVD drive?
My system:
865PE NEO2-FISR
1x160GB WD PATA drive, IDE 1, last spot on cable, jumpered as master
1x120GB WD SATA drive, SATA 1, jumpered as factory
1xOptoRite DVD-RW, IDE2, last spot on cable, jumpered as master
BIOS Setup:
Legacy/PATA+SATA (I tried both Native settings--SATA only/Keep PATA enabled, PATA only/Keep SATA enabled, but the system could not see my DVD-RW drive in either setting).

BIOS 1.7. I'm going to take the jumper off, thanks for that information. Should I set my DVDRW to cable select?
I also see that the beta BIOS fixes some problems with similar HDD issues, so I guess I'll try that if it isn't fixed by the jumper.

Mail Auto Detect URL Links

This is a long-standing problem that I have had that recently re-surfaced when I upgraded to Snow Leopard. There was a previous discussion with the same problem here (http://discussions.apple.com/thread.jspa?threadID=2197566&start=0&tstart=0).
The basic problem is this. Mail will auto-detect and link URL and email addresses while I am composing an email.
This is quite frustrating as it will interupt what I am typing and pull the cursor back to where the url or email address is when it auto-detects and creates the link. Some people might find this useful, I do not because of how quickly it happens - it is very disruptive. While using Leopard and this problem surfaced, it appeared to be related to the MailTags plugin since disabling that plugin made the problem go away. I also found that the auto-detect and linking occurs during activity with the mail server as noticed by a quick burst of activity happening (as shown in the Activity Window) just before the auto-detect and linking occurs.
If anyone can provide any information and assistance as to why this is happening and how to correct it, I would appreciate it. Unfortunatley, I have grown even more comfortable and reliant on MailTags than when this problem surfaced with Leopard and do not want to leave MailTags disabled.

You create the new bookmark with the javascript replacing the original URL from any old bookmark you have and no longer need, or just create a new bookmark for any thing at all specifically for your links script. Then once you are at a page where you want the links displayed, you just select your new links bookmark. Your page will stay open, but a new window will open as well, with all the links listed. You might want to change the size of the window, the width=400 and height=200 result in a pretty small window. Anyway, I put the Links javascript bookmarklet in my Bookmarks menu, so while I am here on this page I just go to the Bookmarks menu, slide down and select Links, and a new window opens with all the links on this page listed.
Francine
PS--It would be more impressive if I had written that script, but I didn't. I found it years ago and saved it with a batch of bookmarklets that do other useful things, such as suppressing animated gifs. I just checked, and a particularly useful collection, Jesse's Bookmarklets, still exists:
https://www.squarefree.com/bookmarklets/

How to do auto URL redirect in sun web server ?

Hi, i need to do auto url redirect in my sun web server. Currently i'm setup some rules for the reverse proxy in obj.conf file and the syntax looks like:
<Object name="reverse-proxy-/test">
<If $internal and $uri =~ "index.html">
NameTrans fn="redirect" from="/" uri="/examples/abc.html"
</If>
Route fn="set-origin-server" server="http://localhost:8989"
</Object>
The situation is:
1) When users browse "*http://localhost/examples/abc.html*" it will redirect to abc.html
2) When users browse "*http://localhost/test*" it will redirect to the localhost admin GUI (http://localhost:8989/admingui/admingui/serverTaskGeneral)
My desire output should be whenever users browse the "*http://localhost/test*" , it will redirect to abc.html page.
the syntax might be wrong. So, anyone knows how to fix this? I'm keep trying but nothing worked. Please help me.

Moderator action: Moved from Servers General Discussion.
db

How to file auto number in save for web ?

Hi All,
how to file auto number in save for web ?
I have make an action script in Photoshop cs5 that
change the image resolution and SaveForWeb...
(but at this point user need to supply the file name)
so, How to write the code/action such that when the
action button is click the image will save into the file
file2eMail_001,file2eMail_002,file2eMail_003,file2eMail_004
or to any unused number ?
thank for any help!

You could also ask over in the Photoshop Scripting Forum, I’m pretty certain stuff like progressively numbered copies has been addressed there previously.

Auto-detect/redirect script for JDK 1.6?

Similar Messages

Maybe you are looking for