Auto-Flow not formatting to master

I am placing a Word 2010 document into an InDesign document with facing pages. The Word document text places correctly, but the formatting does not. For example, if I have three columns in both of my Master pages, autoflow places it in two columns, and the top and bottom margins (height) are too high and too low. Any idea what might be going wrong? Here's the Master pages.
Here's the first spread after auto-flow (note two columns):
And the second spread (two columns and wrong margins).
Thanks!

Steve and Peter,
Thank you for responding (I was expecting an E-mail notification of responses, otherwise I would have replied earlier).
As it turns out, it appears something was wrong with my Master page. I had a similar Master page in the same document, and it auto-flowed the same Word text without any problem, so I just made a copy of that Master page and used it with full success.
I (thoughtlessly) deleted the original Master page, I probably wouldn't be able to recreate the same problem to figure out what happened. Practically, I don't need to know anyway, since everything is working fine now!
Thanks again.

Similar Messages

AUTO FLOW?

Is there an auto flow selection when placing text from microsoft word?
Leopard/Indesign 5.0.3/Intel Mac

Okay, I think I have it. It's been a while since I've used InDesign. . . . So . . . you set up master pages when you set up the new document by specifying the margins there. After the doc is set up, the Master pages shown in the sidebar "pages view" serve to indicate the placement of design elements or to insert repetitive text, etc. -- not to set margins. I was trying to use the master pages to set the margins for flowing the text into my document. duh.
Thank you, Nini, for your help when you said you don't need textframes to place text . . .
Appreciate your help!
Liz

Payment terms based on specific dist.channel, division and Plant but not from customer master.

Dear All
I have a requirement,
Generally payments terms from customer master will flow to sales order. but here my requirement is to get a different payment terms based on specific distribution channel, division, customer and plant those are there in sales order but not from customer master. is there any user exit or functional module to fulfill this requirement, or any other suggestion appreciated.
Thanks,
Reddy

This Problem you can solve without user exit too.
The Customer master data itself can solve the problem.
You can maitain diffrent Payment Term as per the sales area (Dist.Ch+Div+S.org) of customer master.
and each sales are wise u can change the plant also.
You just need to set your logic with the combination of sales are and plant. And need to assign which payment term should determine to sales order.
If you are rasing sales order with X sales area relavent to that payment term will trigger.
Hope above logic will work, otherwise you can go with user exit.

Presenter Notes formatting is lost

The previous topic on this was closed. I am using Keynote '09 to generate training materials. Before I used Powerpoint with presenter notes, the output being a PDF file of the "Notes" pages. Using Keynote, however, every time I "print" to PDF the formatting of all my presenter notes is lost! All I want to do is have them be bulleted lists with a larger font, not anything too special or complex.
So, (1) Why does Keynote loose my presenter notes formatting every time I print? This is obviously a bug.
(2) Why can't I have a presenter notes format associated with a Master Slide? That way I could overcome problem (1) by reapplying the master file format to all my slides that have presenter notes.

Welcome to Apple Discussions,
I've tried the process you indicate and my PDFs still have the text formatted as expected (Font choice, font point size change, and bullets).
You may have an issue with your Keynote presentation or with the Keynote Application.
If you make a brand new presentation (just one slide will do) does the same thing happen when printed to PDF?
I see in your profile you have 5 macs. If you try the same process in a new presentation on one of them, does the same thing happen?
If the answer is yes, could you let me know the exact steps you take to add your text to the presenter notes. Or if you have MobileMe you can put a sample presentation that you don't mind sharing into your public folder and provide your member name so we can see the presentation.
Cheers.

Trying to install Mountain Lion, getting Disk not formatted properly

I am currently running osx 10.6.8, trying to install Mountain Lion and when I am selecting the drive to install too I get:
"This disk is not formatted as Mac OS Extended (Journaled)..."
This is my master HD so i cant really just reformat it? Im not great with macs so step-by-step would help.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,1
Processor Name:          Intel Core i7
System Version:          Mac OS X 10.6.8 (10K549)
Kernel Version:          Darwin 10.8.0

Open Disk Utility, select your Macintosh HD volume. In the status area at the bottom check that it is partitioned using GUID. Now click on the Journal icon in the toolbar above. This should fix it for you without having to reformat the drive.
Since you have the downloaded Mountain Lion installer I suggest you make a copy of it in your Downloads folder. Then do the following:
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/
    Lion application. After Mountain/Lion downloads DO NOT click on the Install button.
    Go to your Applications folder and make a copy of the Mountain/Lion installer. Move
    the copy into your Downloads folder. Now you can click on the Install button. You
    must do this because the installer deletes itself automatically when it finishes
    installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
a. Open Disk Utility in your Utilities folder.
b. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left
      side list. Click on the Partition tab in the DU main window.
c. Under the Volume Scheme heading set the number of partitions from the drop down menu to one.
      Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on the Partition button and wait until
      the process has completed.
d. Select the volume you just created (this is the sub-entry under the drive entry) from the left side
      list. Click on the Erase tab in the DU main window.
e. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the
      button for Zero Data and click on OK to return to the Erase window.
f. Click on the Erase button. The format process can take up to an hour depending upon the flash
     drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
a. Double-click on the InstallESD.dmg file to mount it on your Desktop.
b. Open Disk Utility.
c. Select the USB flash drive from the left side list.
d. Click on the Restore tab in the DU main window.
e. Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
f. Drag the mounted disc icon from the Desktop into the Source entry field.
g. Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

Auto dial not working

Auto dial not working
I'm using an iPad 4, with WiFi and Cellular and iOS 8.1.3
In the past if I was searching for a hotel and found one I only had to tap on the phone number and it would dial using either Skype or MagicJack. It worked using Wi-Fi or my data plan. It was an absolutely valuable function especially when traveling.
Now, when I click on a phone number, it says that it's going to exit the program (like Safari) and start a new program. When I click, Ok, nothing happens.
I must have inadvertently changed some setting.
Skype works, MagicJack works, but I must dial the number manually.
I have tried turning "Handoff" off and on then rebooting, turning FaceTime off and on and rebooting (and every combination of those two programs and actions).
To say the least, I am frustrated because it must be something obvious. (to everyone else!)
Any ideas as to how to how I can get it to dial automatically again?
Thanks for any assistance.

IPAD user guide for IOS 8 is available on line at apple -
you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
http://support.apple.com/manuals
Handoff is only for using with multiple devices - Iphone/Ipad/ipod
This is the bit in Handoff on Phone calls
Phone calls
If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

Payroll period does not correspond to master data error in INLK run & soln

Dear All,
Just wanted to share this Issue and solution which i found after debugging.
I am not sure it is 100% correct.
I am working on indian payroll and was doing lagacy data transfer with INLK schema
i was used to get error '2 payroll period does not correspond to master data'
and this was for only new joinees in that period .what i found out after debugging is
for e.g. employee is hired in 03.06.2011 .and record in t558b is
90300035 1 2011 1 2011 3 01.06.2011 31.06.2011
where 01.06.2011 is a for period begin date ,
now in payroll program this is being checked with joining date in following subroutine check_aper_versus_t558b
so it ends up with above error.now if i go and change 01.06.2011 to 03.06.2011 in T558B then payroll will be successful.
I dont no whether this is right approach but this removed that error.Just wanted to share so
It might help the members.

la diferencia es la fecha del campo FPBEG que debe ser la fecha para los empleados que no esten con el año o periodo completo
the difference is the date field FPBEG Table T558B to be the date for employees who are not full with the year or period

I've been using FCP 7 on my iMac for quite some time with great success. Lately I created a new project and the browser window does not format properly (it's O.K. for previously created projects). The effects window is also not displaying properly.

Help! My browser window is suddenly not formatting properly. (losing browser formatting, glitch, bug) I'm using FCP 7 on an iMac with OS X 10.8.5 and have been successfully doing so for a couple of years. I fear my Final Cut Pro is corrupt and I have to re-install. Anyone ever see this problem? Old projects display and behave fine in the browser, but any new project I create, totally loses the formatting in the browser and the browser also does not display the "effects" window properly anymore. (see below)

YOU ARE A LIFE SAVER! I reinstalled the program and everything. THANK YOU! THANK YOU! MY HERO!!!

I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on. So I know the speakers still work. I have tried resetting all settings and made sure that my side switch was auto lock not auto mute.

I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on. So I know the speakers still work. I have tried resetting all settings and made sure that my side switch was auto lock not auto mute. I have tried the mystical swiping upward on the screen with 4 fingers to get some special sound menu (which I never succeeded in getting). My headphone jack doesn't work all the time either so some times my kids can hear their games and sometimes they can't. I am super frustrated at this point. So any suggestions would be great. Am I missing something basic or do we just have a soundless iPad now?

http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

When I load Windows 7 in Bootcamp it freezes saying partition is not formatted for NTFS(?)

I have to set up a partition on my new iMac to get a piece of business software to load. I tried Crossover and Parallels. Set up a 250 GB partition in Bootcamp and things seemed to be going fine with the windows 7 Ultimate loading but then i get a message like Hard drive not formatted for NTFS. Suggestions

I Just figured it out! I Have a Mac Mini 2012 with 2 Kingston 128 GB SSDs. I thought it was having 2 internal drives that was making problems... Had exact same issue as all of you. First I would get a no NTFS partition error after I used Boot Camp Assistant to make a USB install stick for Windows 7 Ultimate x64.
My solution was simple, removing EVERYTHING connected to my mac mini, including my Wireless mouse and Keyboard. All I had connected was my Apple wired keyboard, the install USB drive, and my monitor. Having a Second internal SSD drive was not the issue.
I formatted the BootCamp partition, and POW! it actually worked. The error that setup couldnt install on this drive, and see error log didnt show up! Try that! it might work!

On windows 7 my itunes 11 opening screen is not formatted correctly. How do I formatt itunes 11 welcome screen?

on windows 7 my itunes 11 opening page is not formatted and looks different than itunes 11 ads and formatting. How do I get to the itunes 11 welcome screen?

I have not seen your error in either my IE or my chrome. I do note that you are using a "strict" Document Type Declaration.
You might try a transitional DTD, which should be more forgiving than the strict:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
Other than that, I don't see anything particular (because I don't see the error, either) that would cause the menu to drop vertically instead of horizontally.
Beth

Disk Utility will not format/erase/partition an unformatted scsi disk

Well, I'm back with a RAID problem again. This time the powers that be sent me a Sun Microsystems StorEDGE A5200 RAID box (22 33gig disks). It's a fibre channel system, and is full of Seagate FC disks. The box only hooks up to my G5 Quad via the Apple Fibre channel card that I have hooked up. It's a dual channel card and both are plugged into the back of the RAID array.
Now, here's what I have.....
The Drives show up in both Disk Utility and Anubis
The is only one drive formatted and it works fine.
All the rest of the drives are unformatted (not just blank, but without any operating system on them, just like they were fresh out of the box)
Attempting to Erase a disk results in the message
Disk erase failed
Disk erase failed with the error:
Invalid Argument
Attempting to Partition a disk results in the message
Partition failed with the error:
Invalid Argument
Attempting to create a RAID set results in the message
Creating RAID set failed with the error:
Could not add a RAID disk to a RAID. (note there was no other RAID set)
Only one disk in the array is formatted and it will respond to all of the functions in Disk Utility.
I was told that I needed to do something using the command line, but that was pretty vague as to what I needed to do. Apparently I need some sort of superuser authority to get these drives formatted, and that's it's not documented any where.
So folks, I leave it up to you again, what do I do?

OK, I have found out much in the last few weeks.
1 - Apple no longer supports SCSI, you may not format disks in any way using OS X. OS 9 also does not work on any of the G5 machines at least.
2 - You can use Linux to do most of the work with SCSI, it is still supported, although there is little clear documentation on how to get it done. Linux is free and works very well with my G5 Quad. But it has a steep learning curve and it's not worth it for just formatting SCSI drives.
What I found out about my SCSI drives turned out to be the core of all the problems I have had, and it was Linux that found the problem. Seems all of the drives I have but one have been formatted in such a way that only the proprietary operating system that formatted them would read them. 520k data blocks. I reformatted several of the drives to 256k blocks and they work fine now.
Before I go out and start going though this for a few hundred more of these drives, my academic supplier found just as many drives that were specifically formatted for use in Sun RAIDs and are properly recognized by OS X, and with twice the drive space (current is 36gig, new ones are 73gig). He is sending me 44 of them (and a second RAID box)
I'm hoping that this finally solves the problem and hope all will be working soon.

ICloud you have the ability to NOT format phone numbers of contacts; this ability is not available on the contacts of iPhone. If I set-up a phone number in iCloud with NO parenthesis, ex. 123- 456-7899, then this format should be available on the iPhone

In iCloud you have the ability to NOT format phone numbers of contacts; this ability is not available on the contacts of iPhone. If I set-up a phone number in iCloud with NO parenthesis, ex. 123- 456-7899, then this format should be available on the iPhone contact.

That is correct is doesn't. Standardized formatting of phone numbers in the iOS app is more important because it supports contact from a variety of locations (gmail, hotmail, etc.). iCloud doesn't (not directly).

I recently purchased a book from itunes on my ipad 2 but when i open the book in ibooks i get (incorrectly formatted or not formatted for ibooks) somebody please help

I am currently deployed over seas.. I recently purchased a book that im pretty stoked about. but when i open it in ibooks i get ( incorrectly formatted or not formatted for ibooks to recognize) the file is an .epub so i dont see how it could be a format issue.. I tried emailing apple but because of the situation they want me to call. I have very limited telecomminications at my location .. somebody please help

The Report a Problem link can also be found in iTunes/Store/View Account/Purchase History.
Before asking for a refund, also try deleting the book and redownloading it.
If you find that the iBookstore is does not meet your needs, you can try one of the others like Kindle, Nook, Kobo, Googlebooks, or Sony.
To let Apple know your views on their apps or services, use
http://www.apple.com/feedback

Auto-Flow not formatting to master

Similar Messages

Maybe you are looking for