Page principale -detail

bonsoir,
j'ai un problème avec les pages principal-detail en effet, je fais la procédure et si cela s'affiche correctement en local en faisant l'affichage direct puis en visualisant le fichier sur mon serveur local, il n'en n'est rien sur internet après l'avoir transféré, seul le cadre du tableau s'affiche avec les en-têtes de colonne, mais pas les données.
je viens de faire le test avec un tableau dynamique et cela fonctionne bien.
Quelqu'un aurait une idée?

Hello Carl,
thanks a lot for this help, the example you have attached will helps me a lot, I will see how apply it to my pages, and if have questions I will post them ...
The lick of my first post is the followimg :
Menus and tabs.
So, if you have any idea about my first question in the post above, please let me know.
Thank you.
Jina.

Similar Messages

3 Page Master Detail Wizard

Using the Create Page wizard to create a 3 Page Master Detail by selecting the "Edit detail on a separate page. Resulting pages are:-
1. Report on Master page,
2. Master Detail page (allows maintenance of Master row)
3. Maintain Detail page
However the linkage between the Master Detail and Maintain Detail pages are suspect along with the resulting Maintain Detail page.
On Master Detail page, displaying an existing master row, the user wants to create a detail row - pressing the [Create] button for the detail does navigate to the Maintain Detail page BUT it does not pass the primary key ID value of the Master row which was displayed.
Also when the user presses the edit details from the Master Details page then why should the displayed detail's lookup master primary key value ID updateable, if APEX is shielding the users/developers from the alleged problems of natural keys and leaning (supporting) surrogate keys then why is the detail's master key value ID updateable?
Also is there any examples out there which show the best way to implement Master with many details and also Master > Detail And Detail of the Detail. In the tutorials we are only exposed to simple data models that only have one level of details.
Thanks

Hi,
I am using the Create Page wizard, specifically the Form, Master Detail with Edit detail on separate page (as opposed to edit details on same page as master using a column report) to create a "3 Page Master Detail" as per wizard feedback.
Take for example the table Suppliers (master) and Supplier_Contacts (details) as a simple example.
Page 1 - Lists Suppliers as a column report on the Suppliers table with an edit icon on the P1_SUPPLIER_ID page item. Pressing edit icon will navigate to page 2 passing the P1_SUPPLIER_ID value as a parameter. Pressing the create icon will also navigate to page 2 but will not pass a P1_SUPPLIER_ID value.
Page 2 - Supplier & Contacts (Master Detail) page, permits edit (insert, update and delete) of Suppliers (master) and also displays the Supplier_Contacts (details) rows for the supplier_id of currently displayed suppliers row. The displayed Supplier_Contracts have an edit icon that will navigate to page 3 passing the supplier_id and contact_id for the selected supplier_contacts row. Also has a create button on the detail Supplier_Contracts region which will navigate to page 3 BUT the wizard has not passed the P2_SUPPLIER_ID value as a parameter as the data model and user action dictates.
Page 3 - Supplier Contacts (edit details on a separate page). My observation is that the Supplier_ID (foreign key to Master Suppliers table) is displayed as text item and is updateable when navigated from page 2 as an edit details transaction/event. Why on earth allow a user to select and navigate the Supplier and then the Contact to edit and then allow the user to update the master foreign key? Similarly if the user has selected and navigated to the Supplier (master) to which they wish to add a Supplier Contact (detail) why is the supplier_id (master PK ID) not passed to the edit details page and the supplier_id also non-updateable.
Hope this explains it a bit better.

Relation between base page and detail page

I'm new to OA Framework. I developed a base page and detail relationship page and in the base page there is a button on clicking of that button, Detail page is rendering .
but the related data with that button should come in the messagechoice box,which is not coming.
Could anyone help me out in developing this page.

HI,
OA Framework belongs to Oracle Applications, not Oracle JDeveloper and ADF. Please post your question on one of the Applications forums
Frank

Merging Pages with Detailed & Dynamic navigation

Hello experts,
We are in an Federated Portal senario with a main portal (consumer) and two producer portal (Bi & xRPM).
What I need to know is if it is possible to merge in a same page an xRPM page with dynamic navigation and a BI page with detailed navigation.
Thanks in advance for your response.
David Burlin
SAP Consultant
http://www.hegedan.com

Hi David,
Did you ever find an answer to this?
We're currently trying to use the Remote Role Assignment with XRPM Portfolio Management. It works fine if we just use the out of the box Portfolio Management Role.
However, we're trying to use a custom role created on the producer and then merge it with another custom role on the consumer. It starts out working fine until it attempts to redirect to content on the Portfolio Hidden workset. Then it gives a runtime error. Any help you could give would be great!
Thanks,
Ken

Master Detail module returns to Master page after Detail record saved

Using Oracle Designer Editor version 10.1.2.0.2 I have generated a Web PL/SQL package
set up as a Master/Detail where the Master and Detail records appear in separate windows.
The Master window contains multi-records each with a link to the related Detail records.
The user clicks on the Detail link and the window that appears will allow the user to insert
a new Detail record. Once the user clicks the Save button I need the Detail window to disappear
and the focus returned to the Master records preferably after a new query is performed.
What are the steps I need to perform to navigate back to the Master page and close the Detail
page?
Thanks,
Mark

The simple answer is that to do exactly what you want would take some fundamental changes to the way the framework works. The actionInsert procedure does what it does - it saves the changes and redisplays the form. You can do post-generation changes to make it do something else, like return to the Master, but I'd advise against it.
But if you want a way to return to the Master window, where the user clicks a button or link on the detail form after saving changes, that we can do. Just make a note of the URL that does the initial display of the Master page - probably my_module_name$.startup. Go into the detail module component, and click the User Text tab. Then at Text Location, "Bottom of View Form" (or Top if you want the link there) add for a link:
htf.anchor('my_module_name$.startup','Return to Master')Or for a button:
htf.formOpen('my_module_name$.startup','GET')||htf.formsubmit('Return to Master')||htf.formCloseYou may need to set the SECECS preference for this module to "No" to get this to work.
An alternative to my method is to define an Action Item in the module that does a navigation. I often am linking directly to the View form for a master table, rather than a record list, as you are, and Action Items don't work well for that, but one might work fine for you.

How to disable automatic loading of iView/Page in detailed navigation?

Hello,
We've upgraded our portal 7.0 from SP9 to SP12.
I've noticed that SAP have added this change: Whenever a user is navigating between one role/tab to another in the top level navigation the first folder at the detailed navigation is automatically opened and the first content there is automatically loaded.
I would like to disable this option - I've looked at the new properties that have been added to the detailed navigation iView between SP9 and SP12 and could only find these two: Display Parent of Hidden Node and Open Folder When Launched.
These two are not solving this problem and they are disabled anyway.
Any ideas...?
Roy

Roy,
Role and Workset Hierarchy:
Folders F1 and F2 (Roles) are defined as entry points and therefore appear on the first level of the top level navigation bar. What happen is when we click F1 (Role), the underlying folders F1a and F1b (Worksets) appear on the second level. On click on F1a the first entry F1a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
And same procedure happens with F2 role on the first level of the top level navigation bar. When we click on the F2 (Role) the underlying folders F2a and F2b (Worksets) appear on the second level of the top level navigation bar. On click on F2a the first entry F2a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
I think need to configure levels of TLN which includes top level navigation, detail navigation and content area and then need to define the entry points.
Below are the links for configuring levels of TLN and right below it you will find link for define entry point:
http://help.sap.com/saphelp_nw04/helpdata/en/5a/33befa45ca7f459b24d0c5d51d0749/frameset.htm
Hope this time it helps you.
Thanks
Mona

10.5.10, iProcurement submission page, No Detail 0

All
I am only getting the error on the page:
You have encountered an unexpected error. Please contact the System Administrator for assistance.
but no detail 0 or any other stack trace.
I enabled, fnd_diagnostics and fnd_debug kind of profiles.
I am seeing about this link in other pages.
Any idea why i am not getting exception part?

Hi,
Could you please provide the navigation details of the page wher you are having this kind of error.... I mean in which page of iProc you are getting this error? We assume that at no point of time you are using back button to go back to previous page in iProc.. Please confirm this as well..
Little bit of extra information will certainly help to understand your issue better...
Regards,
S.P DASH

SAP Web Page Composer: Detailed Navigation is not getting built

Hello!
I am new at this forum. At first I´d like to say hello to everybody! :]
Our issue concerns the following:
We started to work mit the Web Page Composer to build websites für our workers. Everything worked fine until the detailed WPC-navigation is not getting built anymore. We have this issue after a portal restart. Every steps to build and publish a website were done the right way.
1. Publish navigation und paste it to the external connector of the role in the form "wpcnavigation:///wpcontent..."
2. Permissions and security zones were set. Even the super admin is not able to see the detaild navigation anymore.
It is still possible to put single webpages to iViews and then to display them in the portal. And every function of the Web Page Composer works fine. The caches are deactivated. I tried to build a new site with new pages and a new navigation but there is the same problem, no detailed navigation is shown in the portal navigation. The role is assigned to a user and he can see the role at the top navigation but when clicking on it no detailed navigation appears, just a blank page.
As I mentioned this iusse appears after a portal restart. What could be the problem?
Thank you in advance!
Best regards
Georg

Hello Sandeep!
I created a new role and also did the Initial Configurations but it still does not work. May be there is a problem with the external connector where I connect the WPC navigation with the portal navigation? I know it sounds confusing but is there may be a way I could "reset" the WPC configuration? Because at the moment I tried to merge roles the system saved "some configuration" and started to avoid displaying the detailed navigation. So if could delete/reset/change this configuration, it could be that the navigation will be displayed again? I do not unterstand, if I just use one role and so avoid merging roles it just should work again? Or I am on the wrong way? Hopefully I am not telling bull**** right now! :]
At this moment our system running SAP NetWeaver 7.00 SP18. The patch is only available at least SAP NetWeaver 7.00 SP20. We are probably going to upgrade in october to SAP NetWeaver 7.00 SP23 and then we can update the WPC, too. Our Basis said, I have to wait till october. Before this upgrade no updates will be done.
Thanks for your help so far!
Kind regards!
Georg
Edited by: GBrauer on Aug 30, 2011 9:21 AM

Default page in Detailed navigation

Hello,
i have a problem.
The scenario is: In detailed Navigation i have a number of pages that are showed as merge of different WorkSets.
The Merge ID and the sort ID are set but the first page opened is not the first of the list...
Thanks for any helps and suggestions
Andrea

Hi Andrea,
I think you should not use the merge id, but the sort priority to accomplish that (like Noel suggested). That's exactly what we do in our portal.
We have several roles each of which as the same merge-id for "link 2" and contains one of the "page 1", "page 2", ... (these pages do not have a merge id, but only different sort priorities)
The same merge ID on the "link 2" level makes sure that everything appears under "link 2" and now the sort priority (set at the "page 1", "page 2", ... level) determines which page is displayed where. In our scenario the most top page is always activated.
If this doesn't help you: if you click on "link 2" and "page 4" is displayed, is "page 4" the top most entry or is the sort order really
page 1
page 2
page 3
page 4
page 5
and still page 4 is displayed? If so, I think there is an option to set if an entry should be opened or not -- but I am not sure about this.
Regards,
Holger.

User selecting default display page from detailed navigation

Hello all,
Can individual users select a default display page from the detailed navigation section? For instance, say I have a list of pages in the detailed navigation each showing a BW report;
Detailed Navigation
Report 1
Report 2
Report 3
Report 4
So when the users navigate from the top level to here then 'Report 1' is automatically displayed. Say that towards the end of the quarter userX will be looking at 'Report 3' mostly while userY will wish to concentrate on 'Report 2', can the users themselves set their default? Or must this be done by the portal admin, rearranging the order of these pages in the assigned role or changing the display priority of them? But then it wouldn't be per user, if they shared the role.
If the users cannot do this themselves is there a way to do it in Java perhaps?
Thanks for you time,
Patrick.

Hi Detlev,
We decided on an easy way through.
Each page has to display a BW report, very simple. So we're going to give the users an iView where they get a list of all BW reports that they have access to (read from a text file). From there they select what they wish to be their default report (written to another text file).
The default page (first on detailed navigation) reads the text file and displays the BW report found there in an IsolatedHtmlContainer. Not precisely what was wanted at the start but pretty much offers the same functionality.
Thanks for your help, I'll read the doc. It's always good to know these things.
Patrick.

How to move one page header details to next page lines details

Hello,
         I have a requirement in custom page one field having a check box's like enable or disable and in that page one "Select" button.
         Once we enable the check box and click on "Select" button it will move into the next page and display the selected rows in that page.
     How to achieve this please help me in this.
Thanks&Regards,
Rama

Hi,
// processFormRequest()
OAMessageCheckBoxBean InventoryCheckBoxBean = (OAMessageCheckBoxBean)webBean.findChildRecursive("InventoryCheckBox");
Object InventoryCheckBoxObj = InventoryCheckBoxBean.getValue(pageContext);
String InventoryCheckBoxValue = InventoryCheckBoxObj.toString();
HashMap hm = new HashMap(1);
hm.put("myParam", InventoryCheckBoxValue );
//In the next page get the value using below
oapagecontext.getParameter("myParam")
Thanks
Sandeep

Search Page -- master/detail or hide/show??

Hi Gurus,
I have a search page, i am doin manual search ie i m passing query criteria dynamically. I have a result table which shows the result.
Now the requirement is Some orders hvae Notes[ this notes information to be display below the corrosponding order row with some colspan properties ( i mean the notes is stored on multiple column in database)]
right now i am using table to displaying the result. I am confused how to go forword to implement notes as described above.
Can anybody pls guide me what exactly i hvae to do next?
Regards,
Ram

Thanks Sumit,
but the problem is whatever the order have Notes. should be displayed below that order row automatically without user interaction.
Regardsm
Ram

OAF matester detail page : How to have a "Show All" feature on screen, so that all the master and details records are expanded .

Hi ,
I was trying to have a "SHOW ALL" feature on the master - detail page,
the detail table is an advancec table.
Please help me with inputs on how to have "SHOW ALL" feature,
Currently, we have to click on ":Show" for each record at master level to view the child data.
Trying to achive "Show All" Feature so that on click of this the master records on the page 'Expands" showiing all master records with respective detail records.
Regards
bhuvanm

Hi,
You should not set DetailFlag = "Y" in whereclause because there is no such record.
Also detail flag is transient attribute and not the query column, hence the error "Invalid indentifier".
I asked you to use DetailFlag as query column with static value "Y".
for example:
SELECT "Y" detail_flag
FROM <table_name>
This will display all the table records in expanded format. if you want it conditionally then use decode on some bind parameters.
For example:
SELECT DECODE(:1, "SHOWALL", "Y", "N") detail_flag
FROM <table_name>
This bind parameter should be passed whenever you want to execute query for the table.
Regards,
Sandeep M.

Master & Detail Pages

Hello all,
I am asking for help on creating Master - Detail pages. I am using Wamp version 2. Database name "TestingCo" with 3 tables:
Users:      user_id                int(4)           Primary_Key
               user_fname          varchar(30)
               user_lname          varchar(30)
               user_license_id    int(4)
               user_pix_id          int(4)
Licenses: license_id           int(4)             Primary_Key
               license_no          varchar(10)
Pictures: pix_id                 int(4)             Primary_Key
               pix_url                varchar(50)
1. I create a recordset called: rsMasterDetail:
     * with all fields from all 3 tables.
     * Where users.user_pix_id = pictures.pix_id AND users.user_license_id = licenses.license_id
     * Order By users.urser_fname
2. On Master page, I insert Master Detail Page Set:
     * Master page fields: All fields from rsMasterDetail recordset.
     * Link to Detail from: user_id          / later I tried: user_fname
     * Pass unique key:   user_id          / later I tried: one by one from each field of Users table.
     * Show: All records
     * Detail page name:     Detailpage.php
     * Detail page fields:     All from rsMasterDetail recordset.
3. Result: (I always get the same result as below).
     * Masterpage.php - perfect - All correct display between 3 relational tables
     (*) Detailpage.php - when I click on any link from the Masterpage.php:
          - All the fields from Users table are displayed correctly depending on which link I clicked on Masterpage.php
          (+) The fields from table Licenses are displayed the first row only (1st record of the table.)???????????????
          (+) The fields from tabel Pictures are displayed the first row only???????????????
A. When I built the rsMasterDetail recordset, I test it and the result is good.
B. The masterpage.php shows all fields in perfect order.
There must be something wrong when the information passes from Master page to Detail page!??!!???
Please help me!
Thank you

Hi Lon,
When I test it, the tables relationship is perfect since all three tables line up correctly on the masterpage.php. If there is problem with tables relationship, I should also have such problem with the masterpage.php.
I, once tried to build another recordset called: rsTest. This time I had only 2 tables: Users and Licenses. The result was the same; only the first row of the licenses table would show on the detailpage.php; while the masterpage.php the rows on both tables line up correctly.
I have tried many ways to find solutions unsuccessfully. What I get so far is:
* The recordset is display correctly every single time when I click the "Test" button, as well as on the masterpage.php (I meant the tables relationship).
* When the link on the masterpage.php is clicked, the detailpage.php supposes come up and display all rows of 3 tables of the linked record. However, all rows of the 1st table are correctly displayed, and the other table(s) only show its first row regardless which link on the Masterpage.php was clicked.
I hope you and others gurus can help me out.
I appreciate your help.

Chek printng-restricting line items(invoice details) in first page of check

I am printing a check and its invoice details(Item details) also in the same page.How it look means first page it consists of check part and document line items. and second page check details are there. But in case of these item details if it has more than 10 items(invoice details) it should print on second page along with check details.where i have to write the code for it.whether in main widow or else where.please mention .
thanks in advance.answer will be rewarded with points

Hi AJay,
         Write the if condition for a counter to be greater than 10...then it should go
         to new page...
         Place the main window in the next page....along the check details...
         So, now when the item details are more than 10 then start in the new page
         main window and check details will also print in the second page...

Page principale -detail

Similar Messages

Maybe you are looking for