Auto populate account & contact when appointment is create via OEI

Hi,
Does any one know if the account name and primary contact is populated in Appointment detail page when it's created via Outlook Email Integration? I thought i have the new contact created in the system and then when I want to create an appointment or task, the account and contact name will be populated. thanks.

OEI will not create a new contact it will only link to the assoicated contact based on UI Interaction through OEI or based on the email. To Link the Account create a When New Record Saved workflow to joinfield value Primary Contact to Account

Similar Messages

LiveCycle ES2 - Auto Populate Date field when signed

Good afternoon,
I've got a signature field called "sgnPOC" and a date field called "sgnPOCDate" I'd like to have the date field filled in automatically when the sgnPOC is digitally signed.
I added the following to the postSign* event to sgnPOC.
FORM.Main.sgnPOCDate.rawValue = util.printd("mm/dd/yyyy", new Date());
and different variations including setting the date to yyyymmdd and like. It just won't auto populate. It passes the script check in the script editor.
any ideas?
Thank you.

Thank you,
I tried the following - to no success.
FORM.Main.sgnPOC::postSign - (JavaScript, client)
var myDate=date()
FORM.Main.sgnPOCDate.rawValue = Num2Date(myDate, "YYYY-MM-DD")
I also tried this
FORM.Main.sgnPOC::postSign - (JavaScript, client)
var myDate=date()
$.rawValue = Num2Date(myDate, "YYYY-MM-DD")
Which also did not work, but wouldn't that need to know where to put the date?

Bizzare effects when letters are created via a CASE...

CRM 5.0
Our production CRM system is periodically copied into our regression system.
Sometime in late October it was noted that all apostrophe (') characters we being replaced by hash (#) characters when any letter was produced as part of a Case run. Letters produced by a Case are displayed as PDF documents in the WebIC, where as regular letters are displayed as Word docs. Anyway, taking a particular service ticket containing a letter created via the Case run I can attempt to view it in the Regression system, but it simply will not display. However, the same letter against the same service ticket does display in the Production system, although the Hash characters are being displayed instead of apostrophe characters.
If I a create a new letter in the Regression via a Case run it produces a letter which displays apostrophe's perfectly. But any new letters created in the same way within the Production system still show hashes in the letters.
To me it sounds like an OSS note has been applied to Production but not to Regression, however, if that were true QAS and Development would have the same problem as the OSS Notes would have to first be tested in them, but both QA and DEV displapostrophe's fine the Case letters.
I should add that any e-mails created as part of the same CASE run are sent out perfectly in both our production and regression environment so the problem only seems to affect letters. I was wondering if maybe the default printer settings might affect this in some way as I'm sure that when HTML is output by Smartforms it problems uses an alternative printer, maybe.
Has anyone encountered anything like this before?.
Gary King
Edited by: Gary King on Nov 30, 2009 1:15 PM

It would seem that the two senior agents do not have the right authority and this is somehow affecting the Case letters. We know this as other agents have produced Case letters and the apostrophe's have been displayed in the letters.

How to auto-populate the Contact field from a Custom Object

Hi,
I am working on a project where the Contact record is the main focus. I have setup the Contact record as having a one-to-many relationship with CO4. From the Contact Details page I can click on the New button in the Related Record section for CO4 and the Contact from the Details page is auto-populated (which is what I want). I then enter the data into CO4 and click on Save so that the record is displayed in the Related Record section, and then I click into it so that I'm now on the CO4 Details page.
My page layout for CO4 has both Activities and Service Requests as related records, and the page layouts for both of these include the CO4 field and the Contact field. When I click on New for either of these record types, the CO4 field is populated from the previous record but the Contact is not. I realize this is because there is a one-to-many relationship between CO4 and the Activity/SR, but is there any way to also pull over the value in the Contact field?
I also tried this using CO1 which does have a many-to-many relationship (if I understand it correctly), but the Contact field is still not pulling over. Is there a way to make this happen?
Thanks!

This functionality is not available at this time. I would recommend that you submit a enhancement request to customer care.

Automatic AD account creation when user gets created in OIM

Dear All,
Currently in my OIM version 9.1.0.2, AD account creation is request based. Manager has to raise a request to create an AD account for the user.
Now we want to leave this process for AD account creation. Requirement is to create the AD account without any approval process.
Or I can say create an AD account for the user as soon as user gets created in OIM.
Please suggest.
Manohar

Hi GP,
I am able to follow the steps mentioned for creating membership rule and access policy.
Account get created whenever used is added to new group 'createadaccountautomatically'.
However a small trouble here.
Initially resource status goes to ready. I need to select Misallocation attribute in the request form manually. This might be happening because in present request based approval Manager provides the is_location.
How should I overcome this limitation? I mean what change to make so that is_location gets changed automatically.
Please suggest on this.
Manohar

Auto-populate filename field when saving?

I have a form which contains a Save button (using the following JavaScript: app.execMenuItem("SaveAs"))
I have a required field on the form called 'ProjectTitle'. Is there something I can add to the button script which will pick up what the user types in the 'ProjectTitle' field and use that as the filename when they click the 'Save' button?
They wouldn't be required to use the carried over text, but it will save time and prevent possbilty illogical filenames.
Anyone? Thanks!

Hi
I know but you can try to use the field-symbols
DATA: WI_AUFK TYPE CI_AUFK.
DATA: FIELD(30) TYPE C.
FIELD-SYMBOLS <FS> TYPE ANY.
FIELD = '(PROGRAM NAME)STRUCTURE NAME'.
ASSIGN (FIELD) TO <FS>.
WI_AUFK-FIELD1 = ....
WI_AUFK-FIELD2 = ....
MOVE-CORRESPONDING WI_AUFK TO <FS>.
So you're looking for the name of the program and the structure.
I suppose they can be: SAPLCOIH, CAUFVD, so:
DATA: WI_AUFK TYPE CI_AUFK.
DATA: FIELD(30) TYPE C.
FIELD-SYMBOLS <FS> TYPE ANY.
FIELD = '(SAPLCOIH)CAUFVD'.
ASSIGN (FIELD) TO <FS>.
MOVE-CORRESPONDING <FS> TO WI_AUFK.
IF WI_AUFK-FIELD1 IS INITIAL
WI_AUFK-FIELD1 = ....
ENDIF.
IF WI_AUFK-FIELD2 IS INITIAL
WI_AUFK-FIELD2 = ....
ENDIF.
MOVE-CORRESPONDING WI_AUFK TO <FS>.
Max

Get read-only error when trying to create via CI

I have created a component interface of the VCHR_EXPRESS component (along with the proper component fix for an initialization issue). I had VS generate a create_ex XML schema to be used by BizTalk (PS adapter) to create a new voucher. When I try to execute this create xml, I get a "psft.pt8.joa.JOAException: Property is read-only XXXXX" exception. The fields listed in the error log are empty in the XML instance (although the tags exist). For example, I get this error: psft.pt8.joa.JOAException: Property is read-only ADDRESS1_VNDR_1 (1,56). But in my xml instance it looks like this: <ns0:ADDRESS1_VNDR_1></ns0:ADDRESS1_VNDR_1>. There is no value so I'm not trying to set it. Could the error message mean I don't need this field period, i.e. remove it entirely?

@icloud.com addresses are being rolled out over an unspecified period: you will get one without having to do anything, and it will be additional to your @me.com address. You will get a notification email when your account is updated. You will notice that the alias creation pane shows @icloud.com as the suffix - apparently new @me.com addresses cannot be created and I imagine you will have to wait until your account is upgraded before you can create an alias.

Force Accounting Doc when create Invoice

HI all,
I am unable to create an accounting doc when invoice is created.
It error : 'Cost Center BB11 3120 does not exist on 10/28/2011'.
Cost center 3120 does not exist at all. The invoices has posting status 'Error in Accounting INterface'. Is there a way i can force the invoice to create the accounting document for this invoice ?
thanks
Joyce

Hi Shiva,
We go by account assignment. For this cost element 61530, the Column ' Acct Assgnmnt ' is 3 .
It has profit ctr of 30, 400, 420 and its cost center. However, acctg doc seems to point to an invalid cost center for profit center 30.
Any suggestions ?
thanks
Joyce

Workflows not triggered when documents are created in Doc Set via Content Organizer

The following is my scenario:
A document set (containing several documents) is created in Library A on Site A
Using Send To, the Document Set is sent to the Drop Off Library on Site B (a different Site Collection)
A Content Organizer rule then moves the Document Set and its documents to destination Library B
In Library B I have defined a workflow (using Visual Studio 2012) that is triggered when new item is create
When the Document Set arrives in Library B from the Drop Off library (i.e. when the Content Organizer moves the Doc Set to Library B), the workflow is triggered (and executes) on the Document Set, but it is NOT triggered on the documents within the Document
Set. How can I get the workflow to trigger on the documents within the set when they are created via the Content Organizer rule?
The interesting thing is that if I manually add another document to the Document Set in Library B, the workflow is triggered on that document. It just does not trigger when the documents are created via the Content Organizer.

Hi,
In edit Content Organizer rule page, I see there is an option as Automatically create a folder for each unique value of a property:
However, unlike the drop down used in the property based filters above, this drop down *only* contains properties that are required by your content type.
This is done to prevent adding folders that have no values for a property.
If you need to put similar documents to the same folder, you could consider making use of this feature.
Regards,
Rebecca Tu
TechNet Community Support

Delivery date getting calculated wrongly in delivery created via VL10D

Hi Gurus,
We have a strange issue, where in delivery date is getting calculated wrongly for replenishment delivery created via VL10D.
When we are creating via VL10D , delivery date is getting the additional 30 days from MaxDlvCrteDate . With initial investigation i see that VL10D has delivery creation profile 0101 for which no of days maintained in max delv creation date is 30 .
I assume that the delivery date is getting the additional days from delivery creation profile felid no of max delv creation date .
I have created the delivery on 24.03.2011, as per the route no of TL time is 9 days , So Ideally the delivery date should be 04.04.2011 , however system has calculated it as 23.04.2011
Delivery no No of days in MaxDlvCrteDate Delivery date
213443158 30 23.04.2011
If I create the delivery for the same PO using t-code VL10B, then delivery date is calculating correctly.
Not sure why system behavior is strange.
Please help me with your inputs to resolve the issue..
Thanks in advance

Please request one Abaper to solve this problem.
You cannot due nothing as the problem is in Code.
Regards
William

Files saved to Creative Cloud via iPhone, yet when I log in via desktop, it says no files are saved?

I have searched, but not having any joy. I have a number of files saved to my cloud account, yet when I log in via the web to my account, it says there are no files saved? I'm also having no luck turning on file sync. clicking on the button appears to do nothing. Having to email files to myself rather defeats the purpose of the cloud.
TIA

Hi,
to resolve the issue of File Sync not turning on, please try the steps below. Hopefully this will see your files sync down to the desktop.
MAC
1. Quit the Creative Cloud desktop application.
2. In Terminal, copy and paste this command:
rm ~/Library/Application\ Support/Adobe/CoreSync/options.tix
3. Launch the Creative Cloud desktop application and start syncing.
WINDOWS
1. Quit the Creative Cloud desktop application.
2. Open the Start menu, and type 'cmd' in the search box, then enter to start a command prompt.
3. Copy and paste this command at the command prompt:
del %APPDATA%\Adobe\CoreSync\options.tix
4. Launch the Creative Cloud desktop application and start syncing.

Auto populate "Territory" when creating opportunity from the Account screen

Hello there!
I need to know if it is possible to get On Demand to auto populate the "Territory" field when we are creating an opportunity (or contact for that matter) from the Account Screen.
The Account is already created, so we know what the Territory is....but when we currently go to create an opportunity from either the account screen or the contact screen we have to pick the territory again from the picklist. This is very inefficient.
If we can, can you please explain the process of doing so?
Thanks in advance!!!

use a join field value function with post default value property set to true

When i am trying to create an itunes account in ipad 3 and in payment method i select none and after it when i select create ID. "Please contact ITunes Support to complete the transcation" this message will appear. kindly help me

when i am trying to create an itunes account in ipad 3 and in payment method i select none and after it when i select create ID. "Please contact ITunes Support to complete the transcation" this message will appear. kindly help me

You can contact iTunes support via this page (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

To populate account and contact when i click on email

Hello Experts,
crm_ui->Account Management->Search(contacts)
After gettinging contacts when i click on name of contacts it displays all details of contact like ID, Account , Email etc in disable mode.
on that disable mode when i click on email of contact it gets navigated to bt126h_mail where we will get
ACCOUNT and CONTACT
I want this two to be auto populated when i click on email.
plz send details step by step.

HI Muneera
I think what Vinamra wanted to convey is, you need to bind the context nodes of both your components to the respective component controller.
As mentioned by you, the navigation is taking place. So, only the data needs to be passed. This can be achieved by binding the respective context nodes to the component controllers (binding can be done by right clicking on the node). Also check whether the component usage is present or not.
I hope this should solve your problem.
Reward points if this was helpful.
Thanks and regards
Preeti Viswanath

TS3899 I accidently turned ON contacts when I was turning ON my yahoo email account in settings and now all the emails from contacts have been merged to create SEPARATE contact right under the original contact name. Now I have double contacts for everyone

I accidently turned ON contacts when I was turning ON my yahoo email account in Settings and now all the emails from contacts have been merged to create SEPARATE contact right under the original contact name. Now I have double contacts for everyone with an email address!!! how do I UNDO? it says all CONTACTS WILL BE DELETED...when I go to turn CONTACTS to OFF.

Any contacts synced with the Yahoo account will be deleted from the phone if you turn it off. They will still be out there in Yahoo land, so if you turn it off and it deletes something you didn't want to, just turn it back on again.
It's extremely unclear what you did when you say " I only created contacts and typed in emails that I had for those contacts.....so I am still not sure how to UNdo what I did without deleting anything"
Undo WHAT, exactly? You said "I accidently turned ON contacts when I was turning ON my yahoo email account in Settings and now all the emails from contacts have been merged to create SEPARATE contact right under the original contact name."
Just turn it off.

Auto populate account & contact when appointment is create via OEI

Similar Messages

Maybe you are looking for