Auto reset sequence or ID column for a view

Hi,
I just wanted to know what would be the best approach for creating an id column for a view. I tried the rownum but that doesnt cut it when I have to link it to other tables.

user809921 wrote:
I got 3 tables
1. Inc
2. Def
3. Class
Well I want to take a column Type from each, which have different data and obtain all the permutations of it. Then set up a unique key, number.And do what with it? Store it in a new table? Does this need to be immutable and referenced in other tables (through a foreign key constraint for example)?
Hope I have explained my self better.A little better, but there's still a good deal of pertinent information missing. Take some time and describe in detail the BUSINESS problem you are facing, not the technical implementation you are attempting. At least, if you want a comprehensively applicable answer.

Similar Messages

Unable to view columns for attribute views created

Hi all,
Here are the list of errors I am facing while creating attribute views and while adding multiple dimensions (Product dim and Employee dim) to an attribute view.
I am unable to activate my attribute view. I don’t get any error message other than:
Message : STS.STS_ATTRIBUTE_VIEW: one or more columns of Table: DIMSUPPLIER have invalid ABAP name
2. When I added DIM.Product attribute to the attribute view STS_ATTRIBUTE_VIEW, I am unable to see any column names for the DIM.Product to add them to output fields. Same with employee dimension also. Now my question is, Can I add more than one dimension to the same attribute view or do I have to create a new attribute view for every dimension. While I think I can add more dimensions to the same attribute view but I asked this question because I am unable to see any columns listed out in the dimensins Product and Employee.
3. In Employee dimension when I click on the data preview, I don’t get any data. Its all blank. But there is data in the table and its visible when I preview in table.
4. When I right click on the attribute view or the attribute itself I don't see any other options other than "Configure Table" but I remember 2 days back when I worked I was able to see other options like "Data Preview" and few others.
Why am I unable to view the columns of the Product and Employee dimensions? Should there be a common primary key between all the dimensions to be able to view the data in the attribute view?
Please note that my attribute view is still in grey inspite of hitting on save and validate and save and activate several times. And I am getting a warning message, "Some services are not started" on my hdbsystem and the system is showing yellow colour.
Please advise.
Thank you.
Regards,
Pavan.

Hi Pavan,
To much words and no picture, this doesn't help you to obtain community feedback.
Can you sintetize your question, maybe even split it in minor questions.
I confess I failled to understand what you are facing.
Regards, Fernando Da Rós

Create Auto increment sequence number for list view report

Hi All,
Am using BAM 11.1.1.6 version, Have updating list report & wants to create auto increment sequence number at report level. Is it possible to create column at run time in BAM reports.
Please help.
Thanks.

Hi All,
Am using BAM 11.1.1.6 version, Have updating list report & wants to create auto increment sequence number at report level. Is it possible to create column at run time in BAM reports.
Please help.
Thanks.

IPhone won't activate after "auto" reset

Hi,
I went to bed at 10:30pm last night, set my iPhone alarm for 05:30am this morning, dimmed my brightness to its lowest setting (as I always do, so I don't get blinded when I check the time during the night) and then left my phone beside my bed.
This morning, when the alarm went off, I couldn't switch it off, because my iphone was in the middle of some "restore" after doing what can only be called an "automatic" reset. I had to switch the phone off to stop the alarm.
Now, I can't get past the activation screen and keep getting the "Your iphone could not be activated because the server is temporarily unavailable" screen. No matter HOW many times I try, or how long I wait between tries, it just won't complete this part.
I followed the advice in various forums, and tried connecting to iTunes. However, iTunes says "The software on the iphone has expired and must be updated to a new version" - all of which I find extremely strange as:
1) My iPhone is (was - God only knows what it's on now) on the latest build of 5.1
2) iTunes is on version 10.6 (updated recently)
3) When I clear the iTunes message, it tries to sync the phone but, obviously as the phone hasn't yet activated after the auto-reset, can't.
4) The iTunes screen showing the iPhone information states that the software is the latest version and doesn't need changing.
I'm now stuck with an iPhone which doesn't work and I don't live near an Apple store either - only a Stormfront store
Anybody got any ideas?
Thanks,
Tony

I have a similar situation. I woke up with a 'bricked' iPhone. I can't get into it as I had a beta version installed and the beta has expired. I used that beta version because the stable iOS 5.0 gave me a SIM error every so many hours (after which I needed to turn on and off my phone). Tried everything, and installing the beta solved that issue for me (really glad it did). I installed it as a non developer.
I now can't update the iOS through iTunes, I can't get in my phone, I simply can't use the device as I can not get passed the developer screen. I can't even backup because a session cannot be started from iTunes. All iTunes is saying is "The software on the iphone has expired and must be updated to a new version" and when I check for update, it gives back "This version of the iPhone software (5.1) is the current version".
So I'm stuck with a great device which doesn't work.

How to auto reset delivery block in item level in sales order

hi i have one scenario. After creation of sales order it needs to be approved through work flow at item level so that without approval no delivery can be made. We have blocked the items in sales order now we want after approval the blocked status should be auto reset from block to free. how to do it.

Hi,
How is the approval taking place? Is it through work flow? If yes, You can write code for BDC or BAPI for removing the block after the approval step.
If it is manual approval, then you can write a program with BDC/BAPI for removing the block with input as sales order number.
Ask the approver to run this program after the approval.
Thanks,
Vinod.

[TS 41] UI Auto Load Sequence Files

Hi All
I had a labVIEW UI that could load a sequence file when opened (user could change sequence file at run-time).
However, when shifting TestStand from 4.0 to 4.1 (and LabVIEW from 8.5 to 8.6).
The VI still could load the sequence but all the TestStand activex control buttons are disabled so user could not
run the loaded sequence files. I have no idea why this happen and guess it's about TS API changes from 4.0 to 4.1.
So how do I need to modify my code to achieve this? (I know we could use command line but I'd prefer the feature
built-in). I attached my UI (TestStand User interface.vi) and a seququence as a zip file below.
Thank you
Attachments:
Auto Open sequence.zip ‏182 KB

Kirika -
The only thing that would cause the UI controls to be disable is if there is no currently logged in user or if the logged in user has limited privileges. So check the settings on the User Manager tab of the Station Option dialog box between the two instances of TestStand that you are comparing. Are they the same, and if not, what is different? Options include enabling Automatically Login Windows System User and create a default user for yourself. You might try disabling Check User Privileges and leave Require User Login empty, but I think there is a known issue where the \run and \runEntryPoint command-line arguments are ignored when no user is logged in.
Scott Richardson
National Instruments

Can I customize the standard columns for the search results (list view) specifically?

When searching for emails I would like to adjust the columns in the search results list view, e.g. add the sender's address. This I would like to save as standard columns specifically for the search results list view, since in other contexts I do not need it. However, I can only set standard columns for existing folders, not for the context of "search results".

re :When searching for emails
what method are you using?
Are you talking about 'Quick filter' or 'Global Search' or via 'Edit' > 'Find' > 'Search Messages' ?
'''If you used the Global Search:'''
Typed in a word: eg: Birthday and selected 'Messages mentioning birthday'
Then a search is returned in a new tab.
You click on 'open email as list' - to open in a new tab.
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
If you only want to see eg: From and Date
click on the icon 'select columns to display' located to far right of header column name.
deselect Subject and Location
next time you run a global search then only those columns appear in the 'open email as list' view.
'''If via 'Edit' > 'Find' > 'Search Messages' ?'''
enter search parameters and click on 'Search'
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
Subject and Location cannot be edited.
Other column headers can be selected in the same way using the far right 'Select columns to display' icon.
Any column headers you select will not be remembered if you close and later peform another search.
If you click on 'Save as Search folder'
This will create a folder in your Folder Pane and you can select column(s) you wish to display.
Any Column headers you choose to display are selected for that saved search folder.
The column headers only change if you select to reset defaults on that folder or from another folder you select to apply to other folders for either the search folder or all folders in the account.
'''If using Quick Filter:'''
The QuickFilter type of search is done on the folder that is selected.
You are still in the same folder, it has simply ''filtered'' what it is displaying, so it will obviously still display the same column headers.

Auto increment sequence

Can I do something like auto increment sequence in planning so that whenever a user adds new asset it takes a number from this sequence.
Thanks,
foksh

Hi,
Create a member called Counter in Accounts.
Increment the value everytime you add an asset and assign the value after update to asset number:
-Make sure member combination for the Counter values is fixed to one combination only
Counter->BegBalance->NoYear->(one member from all dimensions)=Counter->BegBalance->NoYear->(one member from all dimensions)+1;
"Asset Number" = Counter->BegBalance->NoYear->(one member from all dimensions);
Cheers,
Alp

Auto Increment Sequence Custom Field

Hi All,
I was wondering if it is possible
to have a custom field defined as an auto incrementing sequence number? E.g. Let’s say I go in and create a project for the first time, this field will show the value 1. The next project I go to create, the field shows the value 2 etc. etc.
If possible, how can this be implemented using customization? Can it be done in Project Online? Any help would be greatly appreciated. thank you!

Hi JSimoni1,
You can generate a project unique ID using a webpart, even with Project Online.
Please find below the procedure in EpmExpert blog:
http://epmxperts.wordpress.com/2012/05/21/generate-unique-id-for-project-using-a-webpart/
Note that the code might need some adjustments to stick to your business need.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Behavioral Verilog OpenSparc T1 Reset sequence

Hi all,
I am trying to put together the simplest T1 system - single core single thread - to run some basic programs on it. In particular I would like to execute a sequence of instruction in the machine bypassing the cache.
I am having quite an hard time understanding how to reset properly the OpenSparc. There are several reset signals between asynchronous reset, synchronous and so on. I do believe that I turned off the efuse and bist procedure - enabling the FPGA flags - but I still do not see that the reset address is requested to the icache or itlb and so on.
I tried to lookup in the documentation for the reset sequence for the Opensparc but I could not find any information there. Is there anywhere else I can look?
Thanks
-Andrea

Also look at the design/sys/iop/rtl/iop_fpga.v that consolidates all resets going in to the SPARC core into one. SRISC stuff should be similar.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Type Column for Email is not coming in Business context

Hi All,
I have enhanced the component ICCMP_BT_BCXT.
I am able to get the required values in business context.
I get hyperlinks in the TYPE column for customer follow-up/interaction record.
But when email is sent then TYPE column does not show the hyperlink as Email.
Other details like key/description are occuring for email.
Any pointers on how to get the hyperlink for Email.
Thanks and Regards,
Gauri.

Hi,
by default when you get the hyperlink for interations record/followup document, its logical because on click on this hyperlink, system takes you to the interaction record/Followup document that is linked.
If you set it to email, and if we provide hyperlink to it, where should it navigate on click of the hyperlink ?
Its very easy to provide the hyperlink however it is very important to know what is required on click of the hyperlink, to give the right design .
Thanks & Regards
Suchita

How To Add a new column for ZPR0 price in open sales order report ??

HI,
my requirement is To Add a new column for ZPR0 price in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

k

To Add a new column for ZPR0 prce in open sales order report

HI,
my requirement is To Add a new column for ZPR0 prce in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

HI,
my requirement is To Add a new column for ZPR0 prce in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

Auto reset sequence or ID column for a view

Similar Messages

Maybe you are looking for