Auto Start Windows File Services on Boot

I am trying to figure out how to set a service (specifically Windows File Sharing) to startup automatically on boot. I know when you first set up the server the setup assistant gives you the option to designate which services to start automatically but I cannot figure out how to do this after the fact. Any help would be appreciated.
Thanks!
Mac OS X Server 10.4.11

Most services are enabled/disabled using the Server Admin app. The service named "Windows" allows you to configure and enable Windows file sharing. Once the service is enabled it will start after a reboot. Use Workgroup Manager to configure Windows shares.
Server Admin and Workgroup Manager can be found in the /Applications/Server/ directory on your server. To make changes from a client machine you will need to install the server admin tools from the server cd's or by downloading them from apple.
Hope that helps.

Similar Messages

  • I can't start windows 7 normally from Boot Camp

    I can't start windows 7 normally from Boot Camp.
    It was running fine since I have installed it 7 months ago, but now it can't start or (restart) normally (safe mode is ok). It displays a black screen after showing the logo, and I have to shut down the machine. My Mac system is working fine. Mac technician (Genius Bar) has run a surface scan to verify hd integrity and proofed ok, but could not give any advice on Windows issues.
    Please advice if anything I should do before cleaning up my partition and reinstall Windows.

    I would guess and sorry for asking but you already tried booting from Windows 7 DVD and doing auto repair?
    There are dozens of things to look at and do, and begin with chkdsk in Windows, yes but that only looks at one aspect. You can't really check for bad sectors on a drive's sectors. The best? to use the drive vendor's own utility actually, often with a linux boot CD or Windows program (they don't make Mac OS versions, one reason I first installed Vista over 5 yrs ago)
    Restore check points
    Uninstall last update or driver
    Clean the system of debris temp files, caches, registry errors, fonts and left overs
    make sure you have 20% and 12GB free space or more
    A hard shutdown can create more problems.

  • Windows File Service samba error on log- What does it mean?

    I have pasted the error below. This is repeated every 15 minutes or so. I do not know what it means or how to fix it. There does NOT seem to be any problems with Windows users accessing their files.
    MacServer 10.4.10 bound to AD and joined the Kerberos realm. Windows files service started and configured as domain member.
    Here is the error:
    2007/07/08 15:24:02, 0] darwinacls.c:map_ntacl_todarwinacl(1256)
    mapntacl_todarwinacl: [aclcreateentry] errno(12) - (Cannot allocate memory)
    [2007/07/08 15:24:02, 0] darwinacls.c:map_ntacl_todarwinacl(1256)
    mapntacl_todarwinacl: [aclcreateentry] errno(12) - (Cannot allocate memory)
    [2007/07/08 15:24:02, 0] darwinacls.c:map_ntacl_todarwinacl(1256)
    mapntacl_todarwinacl: [aclcreateentry] errno(12) - (Cannot allocate memory)
    [2007/07/08 15:24:02, 0] darwinacls.c:map_ntacl_todarwinacl(1256)
    mapntacl_todarwinacl: [aclcreateentry] errno(12) - (Cannot allocate memory)
    [2007/07/08 15:45:00, 0] /SourceCache/samba/samba-100.7/samba/source/smbd/nttrans.c:callnt_transactioctl(2288)
    callnt_transactioctl(0x90078): Currently not implemented.

    Well I'm having the same issue after updating my facebook app on Monday, April 16.  I have tried uninstalling and reinstalling the app bu tnothing seems to help. Can anyone help us?

  • Windows File Service Log

    Does anyone know how long info is retained in the Windows File Service Log?
    AFP has the option to archive every x day(s), but this option is curiously missing from the Windows service.
    I'm on Mac Server 10.4.11

    Does anyone know how long info is retained in the Windows File Service Log?
    AFP has the option to archive every x day(s), but this option is curiously missing from the Windows service.
    I'm on Mac Server 10.4.11

  • Auto-Start Tidal Agent services

    Hi all,
         Do you guys have an idea on how to auto-start the service of tidal agent in linux? Thanks!

    Thanks guys for the inputs.
    It is now working, this is what I did:
    I created "mystartup.sh" at etc/rc.d/init.d with this script inside:
    #!/bin/bash
    /opt/TIDAL/Agent/bin/tagent TIDALAGENT1 start
    #author: Lodz
    #chkconfig: 345 25 75
    #description: tidal agent auto startup
    then i added the shell script on boot using this commands:
    # chkconfig --add mystartup.sh
    # chkconfig mystratup.sh on

  • Cannot start systemd-logind.service when booting.

    The boot sequence had a logind.service fail, and then was stuck when trying to open the Gnome Display Manager. The output was:
    Starting Login Service...
    [FAILED] Failed to start Login Service.
    See "systemctl status systemd-logind.service" for details.
    Stopping Login Service...
    [ OK ] Stopped Login Service.
    Starting Login Service...
    [FAILED] Failed to start Login Service.
    See "systemctl status systemd-logind.service" for
    Stopping Login Service...
    [ OK ] Stopped Login Service.
    Starting Login Service...
    [FAILED] Failed to start Login Service.
    See "systemctl status systemd-logind.service" for details.
    [ OK ] Started dhcpd on enp4s0.
    [ OK ] Reached target Network.
    Starting Network Time Service...
    [ OK ] Started Network Time Service.
    [ OK ] Reached target Multi-User System.
    [FAILED] Failed to start GNOME Display Manager.
    See "systemctl status gdm.service" for details.
    [ OK ] Reached target Graphical Interface.
    I have disabled the gdm.service using an installation disk with chroot in order to login, and after the restart I tried `sudo systemctl status systemd-logind.service`. The output is:
    ● systemd-logind.service - Login Service
    Loaded: loaded (/usr/lib/systemd/system/systemd-logind.service; static; vendor preset: disabled)
    Active: failed (Result: start-limit) since 月 2015-04-06 17:59:52 JST; 56s ago
    Docs: man:systemd-logind.service(8)
    man:logind.conf(5)
    http://www.freedesktop.org/wiki/Software/systemd/logind
    http://www.freedesktop.org/wiki/Software/systemd/multiseat
    Process: 249 ExecStart=/usr/lib/systemd/systemd-logind (code=exited, status=1/FAILURE)
    Main PID: 249 (code=exited, status=1/FAILURE)
    Status: "Shutting down..."
    4月 06 17:59:52 masasin-arch systemd[1]: systemd-logind.service has no holdoff time, scheduling restart.
    4月 06 17:59:52 masasin-arch systemd[1]: Stopping Login Service...
    4月 06 17:59:52 masasin-arch systemd[1]: Starting Login Service...
    4月 06 17:59:52 masasin-arch systemd[1]: start request repeated too quickly for systemd-logind.service
    4月 06 17:59:52 masasin-arch systemd[1]: Failed to start Login Service.
    4月 06 17:59:52 masasin-arch systemd[1]: Unit systemd-logind.service entered failed state.
    4月 06 17:59:52 masasin-arch systemd[1]: systemd-logind.service failed.
    At the moment, I cannot get into any graphical environments, but I do have access to the shell.
    Let me know if you need more information.

    I ran
    journalctl -b -u systemd-logind
    right after a reboot, and the output is as follows:
    -- Logs begin at 水 2013-08-21 08:01:49 JST, end at 水 2015-04-08 18:26:45 JST. --
    4月 08 18:26:14 masasin-arch systemd[1]: Starting Login Service...
    4月 08 18:26:14 masasin-arch systemd[1]: systemd-logind.service: main process exited, code=exited, status=1/FAILURE
    4月 08 18:26:14 masasin-arch systemd[1]: Failed to start Login Service.
    4月 08 18:26:14 masasin-arch systemd[1]: Unit systemd-logind.service entered failed state.
    4月 08 18:26:14 masasin-arch systemd[1]: Unit systemd-logind.service failed.
    4月 08 18:26:14 masasin-arch systemd[1]: systemd-logind.service has no holdoff time, scheduling restart.
    4月 08 18:26:14 masasin-arch systemd[1]: Stopping Login Service...
    4月 08 18:26:14 masasin-arch systemd[1]: Starting Login Service...
    4月 08 18:26:15 masasin-arch systemd[1]: systemd-logind.service: main process exited, code=exited, status=1/FAILURE
    4月 08 18:26:15 masasin-arch systemd[1]: Failed to start Login Service.
    4月 08 18:26:15 masasin-arch systemd[1]: Unit systemd-logind.service entered failed state.
    4月 08 18:26:15 masasin-arch systemd[1]: Unit systemd-logind.service failed.
    4月 08 18:26:15 masasin-arch systemd[1]: systemd-logind.service has no holdoff time, scheduling restart.
    4月 08 18:26:15 masasin-arch systemd[1]: Stopping Login Service...
    4月 08 18:26:15 masasin-arch systemd[1]: Starting Login Service...
    4月 08 18:26:15 masasin-arch systemd[1]: systemd-logind.service: main process exited, code=exited, status=1/FAILURE
    4月 08 18:26:15 masasin-arch systemd[1]: Failed to start Login Service.
    4月 08 18:26:15 masasin-arch systemd[1]: Unit systemd-logind.service entered failed state.
    4月 08 18:26:15 masasin-arch systemd[1]: Unit systemd-logind.service failed.
    4月 08 18:26:15 masasin-arch systemd[1]: systemd-logind.service has no holdoff time, scheduling restart.
    4月 08 18:26:15 masasin-arch systemd[1]: Stopping Login Service...
    4月 08 18:26:15 masasin-arch systemd[1]: Starting Login Service...
    4月 08 18:26:15 masasin-arch systemd-logind[257]: Failed to connect to system bus: No such file or directory
    4月 08 18:26:15 masasin-arch systemd[1]: systemd-logind.service: main process exited, code=exited, status=1/FAILURE
    4月 08 18:26:15 masasin-arch systemd[1]: Failed to start Login Service.
    4月 08 18:26:15 masasin-arch systemd[1]: Unit systemd-logind.service entered failed state.
    4月 08 18:26:15 masasin-arch systemd[1]: Unit systemd-logind.service failed.
    4月 08 18:26:15 masasin-arch systemd[1]: systemd-logind.service has no holdoff time, scheduling restart.
    4月 08 18:26:15 masasin-arch systemd[1]: Stopping Login Service...
    4月 08 18:26:15 masasin-arch systemd[1]: Starting Login Service...
    4月 08 18:26:15 masasin-arch systemd-logind[257]: Failed to connect to system bus: No such file or directory
    4月 08 18:26:15 masasin-arch systemd[1]: systemd-logind.service: main process exited, code=exited, status=1/FAILURE
    4月 08 18:26:15 masasin-arch systemd[1]: Failed to start Login Service.
    4月 08 18:26:15 masasin-arch systemd[1]: Unit systemd-logind.service entered failed state.
    4月 08 18:26:15 masasin-arch systemd[1]: Unit systemd-logind.service failed.
    4月 08 18:26:15 masasin-arch systemd[1]: systemd-logind.service has no holdoff time, scheduling restart.
    4月 08 18:26:15 masasin-arch systemd[1]: Stopping Login Service...
    4月 08 18:26:15 masasin-arch systemd[1]: Starting Login Service...
    4月 08 18:26:15 masasin-arch systemd[1]: start request repeated too quickly for systemd-logind.service
    4月 08 18:26:15 masasin-arch systemd[1]: Failed to start Login Service.
    4月 08 18:26:15 masasin-arch systemd[1]: Unit systemd-logind.service entered failed state.
    4月 08 18:26:15 masasin-arch systemd[1]: Unit systemd-logind.service failed.

  • Can't start "Windows Deployment Services" Service

    I have a Windows 2003 Server that has WDS SP1 installed.  The Windows
    Deployment Services Server Service isn't started and when I try to
    start it I get a message that says:
    Windows could not start the Widows Deployment Services Server on Local
    Computer.  For more information, review the System Event Log.  If this
    is a non-Microsoft service, contact the service vendor, and refer to
    server-specific error code 2310.
    Event viewer lists Event ID 257 and this:
    An error occurred while trying to start the Windows Deployment Services
    server.
     Error Information: 0x906
      When I go to the actual WDS application, my server isn't listed.  If
    I try and add it, I get a message that says "The Windows Deployment
    Services configuration is corrupt.  Would you like to add it anyway?"
    If I say yes, the server is added, but it has a red x through it.
    I thought about removing WDS and then re-installing it, but it listed a
    number of programs that might fail if I did that.
    What should I do?

    Thanks, my problem was exactly that:
    ..................The error you are receiving generally indicates that you have a networking configuration problem on your server that
    is causing the domain to be unreachable...............
    They exchanged the Firewall and forgot to unlock the doors. After review and release back to work.
    Thank you.________________
    Moura

  • How to start Windows file chooser?

    I don't mean the AWT file chooser FileDialog.
    I have seen a Java application use the new Windows file chooser which is used in Windows 2000 and Windows XP. On the left side it has a large bar.
    How can I start that new Windows file chooser?

    Hello, my name is Silvia.
    I'd like to know how to hide that large bar on the left side in the file chooser (jdk 1.4.x).
    My problem is about truncated names like 'My Document' (it is shown as 'My Docum...') or 'My Network Place' (it is shown as 'My Networ...').
    Should I extend the JFileChooser class? What is the name of 'the large bar on the left side in the file chooser'?
    Thank you very much, Silvia.

  • Auto start for all services under solaris 10 ?

    Hi,
    Can I set the oracle auto start ? include listener, sqlplus...etc.
    Thanks.

    Hi,
    Yes I am using oracle as id.
    here is the output:
    solaris10% pwd
    /export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/bin
    solaris10% sh -x ./dbstart
    + :
    LOGMSG=logger -puser.alert -s
    + trap exit 1 2 3
    SAVE_LLP=/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/lib:/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/network/lib
    ORACLE_HOME_LISTNER=
    + [ ! ]
    ./dbstart: test: argument expected
    solaris10%
    By the way, here is my environment variables setting:
    solaris10% env
    HOME=/export/home/oracle
    PATH=/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/bin:/usr/bin:LOGNAME=oracle
    HZ=
    TERM=xterm
    SHELL=/bin/csh
    MAIL=/var/mail/oracle
    LANG=C
    LC_CTYPE=C
    LC_ALL=C
    TZ=Hongkong
    PWD=/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/bin
    USER=oracle
    DISPLAY=solaris10:0.0
    ORACLE_BASE=/export/home/oracle/u01/app/oracle
    ORACLE_SID=orclnew
    TMP=/export/home/oracle/tmp
    TMPDIR=/export/home/oracle/tmp
    ORACLE_HOME=/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3
    LD_LIBRARY_PATH=/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/lib:/export/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_3/network/lib
    ORATAB=/var/opt/oracle/oratab
    solaris10%
    Thanks.

  • How can I delay auto-start of a program at boot?

    Hi,
    I have set BOINC-manager as auto-start item in system preferences. However, I would like to set a delay to the start of BOINC-manager of e.g. 3 minutes after startup of the computer so that Tech Tool Pro can finish it's checks before BOINC starts.
    Is there a way to do that?
    Thanks in advance!

    You can create an Applescript looking like this:
    delay 120
    tell application "BOINC-manager" to launch
    You need to save the script "As Application", then save it somewhere standardized. Open your System Preferences>Accounts>Startup Items and add the script to the list.

  • Auto start of Oracle services

    I've created an Oracle 8.1.5(Std Ed) database on a WindowsNT 4.0 (SP5) server. The datafiles, init<SID>.ora and control files are all in a directory that contains a blank space (e.g. c:\Program Files\). The database instance does not start automatically when I boot the server. But if I create the DB such that all the files are in a directory with no blank space, it starts automatically. Is it that paths containing blank spaces are not supported in Oracle8i?
    By the way, the file system used is FAT and not NTFS.

    In the control panel services have you choosen the option automatic startup for the oracle service and database.

  • Auto start war file problem

    I installed war file on the web logic server,after step 1,I press 'servicing all request' button for starting.
    unfortunately,I must repeat these action every time.The Application Server does not start project automatically.
    My WebLogic Application version is 10.3

    who can help me?maybe I did not describe situation clearly?

  • How do i find the start up file information when booting OSX

    How can I find out what programs/files are started when I boot up my iMac?  Running latest OSX on i7 iMac

    Hello Klaus1
    thank you for your quick response.  My System Preferences pane does not show an Account section.  Any suggestions how I can get this to show?
    Thank you

  • SKYPE not letting me turn off Auto Start Windows 10

    I just upgraded to Window 10 yesterday and now I can not keep SKYPE from starting with Windows. I uncheck the Start with Windows and get an error message that the Port is invalid. The default Port settings are checked.

    What exactly are the settings you see in Tools -> Options -> Advanced -> Connection? Are they similar to what is shown here? https://support.skype.com/en/faq/FA148/which-ports​​​​​​​​​​​​​​​​-need-to-be-open-to-use-skype-for-w​...

  • An error occurred while trying to start the Windows Deployment Services server

    After rebooting the server, I cannot start the Windows Deployment Services anymore.
    It worked perfectly before the reboot. When starting it manually these errors appear in the event log:
    The Windows Deployment Services Server service terminated with service-specific error 1460 (0x5B4).
    An error occurred while trying to initialize multicast manager. Windows Deployment Services server will be shutdown.
    Error Information: 0x5B4
    An error occurred while trying to start the Windows Deployment Services server.
    Error Information: 0x5B4
    This is on server standard beta 3.

    I have removed the server from the WDS, then I have uninstalled the role, rebooted, reinstalled the role.
    When I started the WDS the server was back in there, but when I wanted to start the service I got the message "the windows deployment services configuration is corrupt". I have triggered these commands to reset this:
    Code Snippet
    wdsutil /Verbose /Progress /Uninitialize-Server
    Windows Deployment Services Management Utility [Version 6.0.6001.16510]
    Copyright (C) Microsoft Corporation. All rights reserved.
    Tearing down server...
    == Original server operational mode: Native ==
    -> Resetting setup state
    -> Disabling and resetting Windows Deployment Services services
    -> Removing server BINL SCP
    -> Removing Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST
    == Final server operational mode: Not Configured ==
    The command completed successfully.
    Then i did this command, but again it failed to start at the end.
    Code Snippet
    C:\Windows\system32>wdsutil /Verbose /Progress /Initialize-Server /REMINST:"c:\R
    emoteInstall"
    Windows Deployment Services Management Utility [Version 6.0.6001.16510]
    Copyright (C) Microsoft Corporation. All rights reserved.
    Setting up server...
    -> Creating Windows Deployment Services installation tree
    ---> Creating Windows Deployment Services installation root at \\LH-AJGG6OZWH9Z4
    .longhorn.office\c$\RemoteInstall
    ---> Creating Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.of
    fice\REMINST
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\x86\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\ia64\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\x64\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\Fonts
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Tmp
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Mgmt
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\WdsClientUnattend
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Templates
    -> Installing Windows Deployment Services files
    ---> Installing system files
    ---> Installing boot files for x86
    ---> Installing boot files for ia64
    ---> Installing boot files for x64
    -> Updating registry
    -> Configuring the TFTPD service
    -> Configuring BINL SCP
    Enabling Windows Deployment Services services...
    Starting Windows Deployment Services services...
    An error occurred while trying to execute the command.
    Error Code: 0x41D
    Error Description: The service did not respond to the start or control request in a timely fashion.
    Anyone have an idea what could be the cause? I found this additional error in the event log, but distributed file system hasn't been installed since the beginning.
    DFS could not access its private data from the Active Directory. Please manually check network connectivity, security access, and/or consistency of DFS information in the Active Directory. This error occurred on root REMINST.

Maybe you are looking for