AutoConfig could not successfully execute the following scripts bisdblrp.cm

When i run the autoconfig, it end up with following error message:
AutoConfig could not successfully execute the following scripts:
Directory: E:\oracle\fincomn\admin\install\FIN_ora-fin
bisdblrp.cmd INSTE8_APPLY -1
this error is comming after running the FNDCPASS utility to change apps and other schema password. i also changed the password for sys and system and remote_login_passwordfile parameter is set to exclusive.
AutoConfig is exiting with status 1
regards

There are many reported Metalink notes about bisdblrp.sh (bisdblrp.cmd), here are some links:
Note: 397773.1 - bisdblrp.sh failed with ORA-01031: insufficient privileges while running Autoconfig
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=397773.1
Note: 431079.1 - Bisdblrp.sh Fails With ORA-06502 Error
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=431079.1
Note: 417073.1 - Bisdblrp.Sh Fails During Clone Autoconfig
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=417073.1
Note: 360679.1 - Adautocfg errors on bisdblrp.sh - buffer too small ora-06502
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=360679.1
So, checking AutoConfig log file should be helpful in revealing more details about the error.

Similar Messages

  • AutoConfig could not successfully execute the following scripts afcpnode.cm

    When i run the autoconfig, it end up with following error message:
    [AutoConfig Error Report]
    The following report lists errors AutoConfig encountered during each
    phase of its execution. Errors are grouped by directory and phase.
    The report format is:
    <filename> <phase> <return code where appropriate>
    [SETUP PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: d:\oracle\prodcomn\admin\install\PROD_oraprod
    afcpnode.cmd INSTE8_SETUP 1
    [PROFILE PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: d:\oracle\prodcomn\admin\install\PROD_oraprod
    afcpgsm.cmd INSTE8_PRF 1
    AutoConfig is exiting with status 2
    this error is comming after running the FNDCPASS utility to change apps and other schema password. i also changed the password for sys and system and remote_login_passwordfile parameter is set to exclusive. This error is comming on application node. On Database node there is no error.
    Thanls and Regards

    Is this problem is linked with apps user's password length because it is 17 char long and may be apps password variable is not that much longI could not find any reported bugs/notes about the password length, only a bug (5859062) about the domain name length.
    Note: 418403.1 - AUTOCONFIG FAILURE AFCPNODES.SQL DOMAIN NAME LONGER THAN 30 CHARACTERS
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=418403.1

  • AutoConfig could not successfully execute the following scripts adsvalsn.cm

    When i run the autoconfig, it end up with following error message:
    AutoConfig could not successfully execute the following scripts:
    Directory: E:\oracle\fincomn\admin\install\FIN_ora-fin
    adsvalsn.cmd INSTE8_APPLY -1
    AutoConfig is exiting with status 1
    And because of this error autoconfig takes more than an hour to complete. please help me
    regards

    - Do not run AutoConfig command from any terminal clients
    - Make sure the apps listener is down when you run AutoConfig
    In addition, you may review the following notes:
    Note: 218089.1 - Autoconfig FAQ
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=218089.1
    Note: 393788.1 - Autoconfig Gives Installation Failed And Then Hangs
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=393788.1
    Note: 260365.1 - Adconfig.cmd Hangs When Starting Apps Listener
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260365.1

  • AutoConfig could not successfully instantiate the following files

    Dear Gurus,
    We have just migrated to Autoconfig on DB tier and after running the autoconfig on DB tier we are getting the following error:
    [AutoConfig Error Report]
    The following report lists errors AutoConfig encountered during each
    phase of its execution. Errors are grouped by directory and phase.
    The report format is:
    <filename> <phase> <return code where appropriate>
    [INSTANTIATE PHASE]
    AutoConfig could not successfully instantiate the following files:
    Directory: /volora/oracle9/app/oracle/product/9i/appsutil/install/MSBEP004_dcpsr006osm
    adcrobj.sh INSTE8_APPLY
    addbprf.sh INSTE8
    adsvdb.sh INSTE8
    adsvdcnv.sh INSTE8
    adsvdlsn.sh INSTE8
    afdbprf.sh INSTE8_PRF
    afmkinit.sh INSTE8_SETUP
    Directory: /volora/oracle9/app/oracle/product/9i/appsutil/install
    adlnkoh.sh INSTE8
    Directory: /volora/oracle9/app/oracle/product/9i/appsutil/scripts/MSBEP004_dcpsr006osm
    adautocfg.sh INSTE8
    addbctl.sh INSTE8
    addlnctl.sh INSTE8
    adlsnodes.sh INSTE8
    adpreclone.pl INSTE8
    Directory: /volora/oracle9/app/oracle/product/9i/rdbms/lib
    config.s INSTE8
    AutoConfig is exiting with status 14
    Please suggest what could be the problem
    Thanks in Advance
    Regards
    Kiran Rana

    hi guru
    The logfile given bellow error
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adpreclone.pl missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adsvdb.sh missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adsvdlsn.sh missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adsvdcnv.sh missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/addbprf.sh missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/afdbprf.sh missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/addbctl.sh missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/addlnctl.sh missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adlsnodes_ux.sh missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adlnkoh.sh missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adautocfg_ux.sh missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adcrobj.sh missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    File /volora/oracle9/app/oracle/product/9i/dbs/initMSBEP004.ora of type INSTALL already exists, this file will not be instantiated.
    File /volora/oracle9/app/oracle/product/9i/network/admin/MSBEP004_dcpsr006osm/listener.ora of type INSTALL already exists, this file will not be instantiated.
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/afmkinit.sh missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/config_aix_64.s missing from file system.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AutoConfig Setup Phase
    Running Setup Process 2 of 2 for AppsUtil
    AC-50400: Script file /volora/oracle9/app/oracle/product/9i/appsutil/install/MSBEP004_dcpsr006osm/afmkinit.sh missing.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AutoConfig Profile Phase
    Running Profile Process 1 of 1 for AppsUtil
    AC-50400: Script file /volora/oracle9/app/oracle/product/9i/appsutil/install/MSBEP004_dcpsr006osm/afdbprf.sh missing.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile
    AutoConfig Services Phase
    Running Service Process 1 of 1 for AppsUtil
    AC-50400: Script file /volora/oracle9/app/oracle/product/9i/appsutil/install/MSBEP004_dcpsr006osm/adcrobj.sh missing.
    Raised by oracle.apps.ad.autoconfig.InstantiateFile

  • Windows XP could not start because the following file is missing or corrupt - message

    Hi there and apologies in advance if this is a daft or very frequently asked question.
    Upon trying to boot up this Toshiba mini NB200 device last night we got this message:
    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.  it then asked me to press r at the forst screen to start a repair if I have the original set up cd.
    The device had to be forced to shutdown previously as it hung when shutting down.
    Now multiple reboots (including uncoupling/recoupling the battery) and resetting the settings from start up menu result in the same error message.
    The device has no cd drive installed but previously Jerry Lippey (in 2011) saved the day by recommending purchase of a product recovery disc (R10804EN) after a 'flashing cursor issue' at logon.
    Has anyone far more clever than I any thoughts (if we're able to borrow a portable cd drive) whether this disc may work again?
    Windows XP was/is preinstalled on the PC (we havent the disc) and we've subsequently added MS Works. A total wipe of the device (as long as XP remains?) wont be too much hassle as we havent any data that we're too bothered about on it.
    Many, many thanks in advance 
    Solved!
    Go to Solution.

    Toshiba NB200-11L
    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM
    Bad news. It means the System hive, which is the most important branch of the registry, is corrupt. Unless you have made provisions for this (we always do on XP systems), the fix is too complex for you to handle (KB307545).
    I'm afraid you'll need to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media as you did before. Do you have important files to rescue?
    -Jerry

  • BLACK SCREEN stating "windows could not start because the following is miss

    I installed Bootcamp update 2.1 and then XP SP3.
    Now when I start up my Mac I am getting a BLACK SCREEN stating "windows could not start because the following is missing or corrupt: <windows root>\system 32-hal.dll Please re-installl a copy of hte above file"
    I tried to use the option key and insert the Windows CD but it won't start up.
    Also, when I start up I must use the option key and select the Mac OS and it will start up and everything is fine there. Advice appreciated.

    Did you ever solve this? I had updated to BC 2.1 (After updating Apple Software Update al on the Windows side) I waited & just tonight tried to install SP-3. It appeared to install & When I was prompted to restart--I also got the black screen. Mine said:
    Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
    You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
    I just force powered off & booted into Mac.
    I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
    You may need to do essentially the same thing. I do not know if this problem is a boot camp problem of just a Windows problem.
    Sure is annoying,
    Good luck!

  • Hp mini could not start because the following file is missing or corrupt /windows/s​ystem32/ha​l.dll.

    windows could not start because the following file is missing or corrupt <Windows root>\system32\hal.dll.
    then it says please re-install a copy of the above file

    Any system or sys32 and any .dll files missing or corrupted errors, usually the only fix is to reinstall windows and anything on hard drive not saved on removable drives...flash, usb, cd or floppy is lost. I've had several sys32.dll file missing or corrupted errors and asked at Best Buy Geek Squad what the fix would cost and that's how I learned the only fix is installing windows.

  • Windows could not start because the following file is missing or corrupt. Windows root\system32\hal.dll.

    Windows could not start because the following file is missing or corrupt. Windows root\system32\hal.dll.  anyone can help

    Have a read here http://support.microsoft.com/kb/314477/en-us
    Maybe it helps
    Stefan

  • Hal.dll: Windows could not start because the following file is missing...

    Hi there...
    did anyone of you guys manage to run WinXP on a Mac running Leopard (Boot camp 2.0)? I couldn't, trying to do whatever i could- repairing boot.ini according to Microsoft's support site, reinstalling Windows again and again, even copying Windows files from an existing Windows-running machine to the Boot camp partition, nothing helped...
    Any suggestions what i should do?
    thanx in advance

    There is a longer thread developing here.
    http://discussions.apple.com/thread.jspa?messageID=5860087
    My last post had some good info, here is a repost:
    Emerging Info! Apparently there are files in windows that disable the means which we are supposed to format the disk. Two of these file names found so far are UNATTEND.TXT and WINNT.SIF. Some computers may have one or the other files located in the \I386 directory of you XP cd. Apparently there is a way to fix the problem my recopying your XP disc to a new CD and deleting the file out. There are directions on one of the links which I am currently following but have not finished.
    http://episteme.arstechnica.com/eve/forums/a/tpc/f/8300945231/m/511003928831
    http://www.macosxhints.com/article.php?story=20071028054744236

  • InDesign is crushing when trying to execute the following script..

    changeToArrow();
    function changeToArrow(){
    replaceText('_MID_ROW_UP','@#!','<25B2>');
    replaceText('_MID_ROW_NoChange','#@!','—');
    replaceText('_MID_ROW_DOWN','!#@','<25BC>');
    function replaceText(a_char_style,a_find_what,a_change_to){
    app.findChangeTextOptions = NothingEnum.nothing;
    app.findTextPreferences = NothingEnum.nothing;
    app.changeTextPreferences.appliedCharacterStyle =  document.characterStyles.item(a_char_style);//_MID_ROW_DOWN
    app.findTextPreferences.findWhat = a_find_what;//down-arrow(!#@)
    app.changeTextPreferences.changeTo =a_change_to;//<25BC>
    app.findChangeTextOptions.includeFootnotes = false;
    app.findChangeTextOptions.includeHiddenLayers = false;
    app.findChangeTextOptions.includeMasterPages = false;
    app.findChangeTextOptions.includeLockedStoriesForFind = false;
    app.findChangeTextOptions.includeLockedLayersForFind = false;
    var results = app.changeText(false);//In this line InDesign is cushing..
    Any one know the reason behind it?

    The error is probably a few lines earlier:
    app.findChangeTextOptions = NothingEnum.nothing;
    You can't set options to zero, you have to set them to true or false, as in
    app.findChangeTextOptions.includeFootnotes = true;
    Peter

  • HT1766 At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer".  Any ideas on how to resolve?

    At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer".  Any ideas on how to resolve?

    See:
    iOS: Troubleshooting backup issues in iTunes
    Try going to iTunes>Preferences>Devices and delete the existing backup so iTunes creates an entire new one vice changing the existing one.

  • My ITunes works perfectly except for the ITunes Store which gives me the following message "I Tunes could not connect to the I Tunes Store. An unknown error ocurred (-3221)

    Whenever I try to connect to the I Tunes Store, I get the following message " I Tunes could not connect to the I Tunes Store. An unknown error occcured (-3221).
    Make sure your network connection is active and try again.
    But my network connection is active.
    Help!

    Hi davwatto thanks for taking the time to reply.
    ok, so tried to open my safari which was version 5.1.7 and i received the error message:
    safari can't connect to the server
    safari can't open the page http://www.apple.com/startpage/ because safari can't connect to the server www.apple.com
    The same error occurred with whatever site I tried to access, so I uninstalled Safari, then reinstalled version 3.2.3 and this time I got the error message:
    The same error message occurred with any website I tried to access. I am able to access all websites including banking etc on IE and firefox.
    Safari can’t open the page.
    Safari can’t open the page “http://www.apple.com/startpage/”. The error was: “unknown error” (kCFErrorDomainWinSock:10013) Please choose Report Bugs to Apple from the Help menu, note the error number, and describe what you did before you saw this message.
    Not sure how to check the logs for itunes though
    If you have any idea how to fix this issue that would be great as im at a total loss.
    Thanks

  • I am running Windows 7 (64bit) , and an error message appears following a recent update to iTunes v 11.1.2:  "iTunes could not connect to the iTunes store. An unknown error occured (-3212). Make sure your network connection is active and try again." help!

    I am running Windows 7 (64bit) , and an error message appears following a recent update to iTunes v 11.1.2:  "iTunes could not connect to the iTunes store. An unknown error occured (-3212). Make sure your network connection is active and try again." I have dug a little bit into possible problems but haven't found a solution yet, one note is that the network connection is OK. A response would be highly appreciated!  Thanks in advance.

    Hi c1r1g1,
    If you are having an issue connecting to the iTunes Store, you may find the following article helpful:
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    - Brenden

  • Using a Mac, OSX 10.6.8; My internet connection is working properly, yet I get the following message in iTunes:  "iTunes could not connect to the iTunes store. An unkown error occurred (-54)."

    Using a Mac, OSX 10.6.8; My internet connection is working properly, I can reach all sites via browser, yet I get the following message in iTunes:  "iTunes could not connect to the iTunes store. An unkown error occurred (-54)."

    I have the same issue with almost exactly the same environment...
    iPhone4S (32GB) running iOS5.0
    Windows 7 Enterprise
    iTunes 10.5.2.11
    iPhone has been set up to wirelessly sync when on charge yet I get this error when the iPhone is not even charging!
    I work for a mobile network operator and although this isn't something we support anyway, we would usually stumble across something like this when customers call us for advice prior to contacting the manufacturer for support, yet this hasn't been a call driver so I'd imagine this is isolated... (either that or not many people have updated their device and set up the wireless sync lol)...
    Hey Apple! Any ideas? :-)

  • When trying to connect to itunes i receive the following message, "iTunes could not connect to the iTunes store"  An unknown error occured (-3212)

    Help me, when trying to connect to iTunes or the iTunes Store I receive the following message. "iTunes could not connect to the iTunes Store." An unknown error occurred (-3212).

    iTunes has been denied by your firewall. Add iTunes to your firewall allowed list.

Maybe you are looking for