Autofill works for forms with autocomplete="off"

From what I can grasp here:
https://developer.mozilla.org/en-US/Firefox/Releases/30/Site_Compatibility#Security
If a field or form has autocomplete="off" set, the password manager should prompt the user to save the password, but the password can not be auto-filled into the field.
This is not what I'm experiencing. I have a simple form with email and password field. Both the form itself and the fields have autocomplete="off", but Firefox 30 will still let me store the details and auto-fill them.
I cannot allow this, as it breaks Angular JS's binding causing things to not work.

You can try to set the signon.autofillForms pref to false on the <b>about:config</b> page.
Note that the signon.overrideAutocomplete pref controls the behavior with autocomplete=off
You can open the <b>about:config</b> page via the location/address bar and you can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config

Similar Messages

I bought a movie on iTunes but when I try to watch it plays back slowly with no sound. Then the video will speed up and the sound will work for a moment then off again and back to slow motion. I have a dell laptop running windows 7

The description says it all. I bought a movie on iTunes but when I try to watch it plays back slowly with no sound. Then the video will speed up and the sound will work for a moment then off again and back to slow motion. I have a dell laptop running windows 7

Hi Normanwh,
If you are having video playback issues in iTunes on your Windows machine, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Regards,
- Brenden

Assign Source of supply is not working for contract with material group

Dear Experts,
I have searched all the threads and gone through before posting my query. So i would ask moderators to go through the thread properly before rejecting this.
We have value contracts with respect to a particular material group without material and with item category W in the contract item, Please note that for the materials with this material group, the source determination is not set and source list is also not maintained.
When we create PR for the material with this contract, and when we click on assign source of supply contracts used to get popped up, but recently from few days, when we click on assign source of supply we are getting an error " no source found for this item ".
Can anybody help on this.
Regards

@ Biju,
As mentioned earlier, we are not creating PR with reference to contract.
first we are creating contract with item category W (material group), without material and plant details.
we create PR with or without material with account assignment K and with the material group in the transaction ME51N, and after inputting all the fields, we click on assign source of supply, it was proposing the existing contracts with respect to material group earlier, but it is not happening for particular material group(it is working for all other material groups)
Hope it is clear.
@ Dev Patra,
we are using DIEN-Service material types and we assign that particular material group to only service material type.
we have not ticked, source list in the material master, we donot have any source list for the materials under that material group.( please check the note 457110- question number 14.)
Regards

My iMessage doesn't work for some with iPhones

WWhy does iMessage not work for some thst have iPhone? For example day 1 text went as iMessage day 2 changed to sms

Hi,
1) That iPhone may not be registered with the iMessages Servers.
Several variants of that:-
2) the iPhone has lost power/is out of range and been "de-registered".
3) Twice my iPhone has become set to Not Receive on the iPhone Number - the User cannot change this - but it has happened. After a while if this is not spotted it loses the link with the Apple ID as well.
4) It is not entirely clear if you Block someone in iMessages whether the iPhone still gets SMS versions.
It appears you might have to block them for Phone (and therefore related services like SMS) as well as iMessages.
5) iMessages servers having a bad day.
9:39 pm Saturday; April 18, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

What shock/flash wave player might work for me with no hangs

For about a year I have tried to make adobe flash player/shockwave player work for you tube videos and other links I go to. I have tried all the "download latest flashplayer" stuff. Just did it a few days ago and have 11.9 etc. And you update my FF every time you want to.
My laptop has no problems. Can I revert to the version of FF on my laptop on this main comp, and the version of Adobe Flash on my laptop, so that I can continue to use FF? Otherwise I am going to Chrome with all of my bookmarks et al.
I just read a thread where you seemed to blame Adobe for this. Uh, you might want to think again.
DO NOT tell me to download the latest Adobe. I did that 3 days ago. WHY can't you get your code to work with them? Or why don't they write code that lets FF in?
Like I said a year of trying to make you work for me and I give up.

I found a solution to the flash player crashes within Firefox, and have not had a single flash playser crash in 6 months at least. The solution involves creating a task to run at regular intervals to delete certain prefetch files. NOT all of them as it is NOT necessary to delete them all.
I have wrote a script that will create the folder structer in programdata/scripts/ and place the exe that actually does the deleting, and have successfully imported the task into task scheduler.
This should resolve all Flash player crashes within Firefox. I posted the information here: https://support.mozilla.org/en-US/questions/968190?page=6#answer-511132
That script is not 100% Automated in the above link, but will get you started.
I have one that i have been able to fully automate, You would just need to check task scheduler in Windows 7 to confirm it will successfully import on its own.
I am looking for testers to confirm this works. This should work on windows 7 64 and 32 bit. Not tested on Windows 8
link for fix available upon private message request
Best regards

Additional fields in report for form with report

Hello,
I got the problem, that I want to create a form with report where the form only changes the values of one table but the report is also using additional fields linked from another table. If I take a view with all fields for my form with report, the form is about all fields and not only about those from the first table. So is there a way to have another table linked to the form than to the report and get a link between them by a key?
I hope that someone has got a great idea and can help me solving this.
Thanks
Jochen

Jochen,
you can create a form with report on the view and afterwards you change the SQL-query into a query on the view. Take care that the original column names remain the same. You get your extra columns in the report and your link to the form remains,
good luck,
DickDral

Why EPCM.donavigate doesnt work for Iview with isolation type embedded

I am using EPCM.donavigate in JavaScript in portal jspdynpage to navigate to different page. This works fine when my iView isolation method is URL but it doesnt work when it is embedded. Am I missing something here? some import?
Regards,
Nitesh

Hi,
In Javacript of Portal jsp page, we are calling EPCM.doNavigate method as below:
function callfunc(obj,externalLink,rid,portalPageURL,InvalidLink)
return EPCM.doNavigate('ROLES://' + obj)
Final URL look something like this...
portal_content/com.sap.pct/com.sap.prod_fld/com.sap.roles/com.sap.rol_career/com.sap.wks_1_1/Folder_2/com.sap.pag_1_1_2
This Code works only for Iviews with URL Isolation but doesnt work with Embedded Iviews as my Page which contains this Iviews is also Embedded and Desktop is also embedded.

XSL Stylesheet for Form with TEXT AREA not responding to DATASRC or DATAFLD

I have a stylesheet for Form which displays data in the input boxes for edit and re submit.
While all input text boxes show data from the database, TextArea box does not display the value for edit
<div align="left">
<table border="0" cellpadding="0" cellspacing="0"
width="600">
<tr>
<td width="600" height="1">
<font face="Arial" size="2">17. Describe how
the accident or exposure
happened</font>
<textarea rows="3"
name="P_ACCD_TXT"
datafld="{ACCD_TXT}"
onblur="javascript:while(''+this.value.charAt(0)==' ')this.value=this.value.substring(1,this.value.length);"
cols="72">
</textarea>
</td>
</tr>
</table>
</div>
In other input boxes value="{column_name}" works, but value attribute is not available for textarea. both datasrc="{ACCD_TXT}" and datafld="{ACCD_TXT}" do not work.
Is it because datsrc and datafld are not supported. Would very much appreciate if some one can clarify on tthis and advise how to go about retreiving data into textarea box
Thanks

datasrc and datafld are Microsoft IE specific "data binding" attributes that are supported in the MS IE5 implementation of HTML.
What you likely want is just the standard HTML way of putting data into a <textarea> that you would do in XSLT like this:
<textarea>
<xsl:value-of select="ACCD_TXT"/>
</textarea>assuming that the current node has a child element named <ACCD_TXT> in the source document.

Mac OSX v10.6.5: How's it working for you with Premiere Pro CS5?

If you've installed Mac OSX v10.6.5, let us know how it's working for you.
Please make sure that you're using the most recent update for Premiere Pro CS5 before you report back. We don't want to waste our time disentangling problems that were actually fixed in Premiere Pro CS5 (5.0.2) from issues that still exist.

So, here is my experience:
http://forums.adobe.com/thread/751458?tstart=0
Basically:
Premiere Pro does not want to play the timeline (or the source window) anymore. Sometime it plays for 2 minutes, sometime for 2 seconde and then stops, but most of time, it wont play at all.
I can scroll over my timeline (no sound scrolling), but when I hit space bar (or clic on the play button) I can see the play button turning into a square (which mean it's now the stop button), but the timecodes doesn't run and the image doesn't play.
So I suggest people to not being stupid as I was and to wait before to update... And hope a solution to come soon.

Screen Sharing no longer works for me with Lion

I use screen sharing all the time, I have several Macs. Ever since I loaded Lion (on all systems) it opens screen sharing, asks for my username and password and loads the screen; I see the screen(s) for about a second then it prompts me again with my login to gain access. It repeats this over and over with my login.
Anybody know what can be done to correct this issue?

This is an issue I have encountered too. Mac to Mac on Lion its sporadic at best - even when you do get in, you will get a strange jerky beachball on the host computer whilst everything appears to be working fine.
Windows to Lion its seriously borked, and you can't even click on an account to log in. Its something to do with ZRLE encoding of the session, and the fact its the first multi session VNC attempt. It rejects the connection unless its 101% happy with it.
Mountain Lion makes this a bit easier...I think they glossed over this in Lion and released a new one instead.
So whilst its not a solution, more of a workaround - your best bet is to upgrade to ML. By all means try making a freshh account on the host computer that matches the client compuer, and see if that authenticates properly. It should do.
Cheaper option: turn screen sharing off, use Vine as your VNC server instead (http://www.testplant.com/products/vine/). You can even do multi session if you want to tinker with some settings and read the forums.
Please mark as solved if this helped you. Thanks!

Syntax for form with name id[1] in it

Hi all,
I'm trying to use this:
document.form1.id[1].value=x
to set the value of a select control on a form that is named id[1]. It doesn't work and complains that form1.id.1 does not exist. If I ditch the [] brackets than it works but I can't rename the control because it is part of OSCommerce.
How do I encapsulate the id[1] so that it is treated literal.
The on_click event is being triggered from outside the form so I can't use this keyword.
I suck...so help me!
TIA,

Sorry about that - you are right, I am trying to find syntax help with Javascript.
Thanks for responding though.
Please disregard my post as I found the solution early this AM.

J4W 10.5 Login only works for users with associated device

Hi all,
I just discovered that using J4W 10.5 and service autodiscovery, the login only works if the user has an Device associated.
Means that login is not possible if the user has only a controlled device profile.
We are using 10.5.1 Build 43318 - Is this a known Bug, or is this working with a different version?
Regards,
Peter

Which form of Service discovery are you using? Is it _cuplogin or _cisco-uds? Do you use a jabber-config.xml file? What is the directory source selected for Jabber, is it CUCM or AD?
Recently i had worked on a case with the following Scenario and opened a Defect for it : CSCup74253
Conditions:
With the following setup Service discovery fails and user has to manually login in Jabber specifying the IP address of the CUP server Service Discovery method : _cisco-uds or _cuplogin Directory connection type : UDS selected on service profile for the jabber user (no XML used) CUCM and CUP version : 9.1.2 Jabber version:9.7.0 and 9.7.1 End user page in CUCM : under controlled Devices only a Hardphone is selected with owner user id populated on device page of the phone in CUCM.
This BUG is solved for Jabber 10.5.1. But in essence if you do not select ANY of the device be it soft-phone or hard-phone under user> controlled devices for that matter Serivce discovery will fail.
Thanks
Tapan

Why doesn't two-finger scrolling work for me with Yosemite?

MacBook Pro from 2010, upgraded to Yosemite and now none of my two-finger scrolling works with the Trackpad. Doesn't work on any application - Chrome, Safari, Word, anything. It's super annoying. Tried messing around with Trackpad options in system preferences, didn't help.

Hi thekidcanada,
Welcome to the Apple Support Communities!
I understand that this type of situation can be very frustrating. One troubleshooting step I would recommend would be to reset the PRAM on your computer. I know the article is written for Mavericks but the steps will be the same for Yosemite.
OS X Mavericks: Reset your computer’s PRAM
Cheers,
Joe

Character palette no longer works for me with Leopard

I need to use the Character Palette frequently in my work, but since going to 10.5 it is not working. Only the bottom part appears, starting with the "View" drop-down menu, and under that the large character on the left and the "Related" scroll box next to it. Therefore, I can't select any other characters from the categories that should be at the top of the CP (or were in 10.4), and I'm stuck with whatever happens to appear in the large character box. How can I get the whole CP back?

For some unknown reason the international data caches can get corrupted and prevent character palette and keyboard viewer to appear in the input tab of the international preference pane. This also prevent from working the special characters item in the edit menu of many applications, including the Finder, Safari and Text Edit.
If this happened to you, go to System/Library/Caches folder and trash the following files (don't worry, they will be re-created when you restart your Mac):
com.apple.IntlDataCache.le
com.apple.IntlDataCache.le.kbdx
com.apple.IntlDataCache.le.sbdl
com.apple.IntlDataCache.le.tecx
As you are attempting to cancel files from System folder, you will be asked for an administrator ID and password.
If you don't have an administrator ID and password, ask the system manager in your office.
After you insert an administrator ID and password, the files will be trashed.
Restart your Mac.
Open System Prefererences (in the apple menu, or inside the main Applications folder), open the International pane, and click the input menu. You will find again the character palette and keyboard viewer items with their chechboxes.
Click the two checkboxes. Be sure to click also at the bottom of the pane the checkbox labeled show the keyboard menu in the menu bar.
Exit System Preferences.
In the right side of the menu bar you will find a menulet with your nation's flag. Click the flag and you will find both character palette and keyboard viewer.
Also, the special characters item in the edit menu of the applications that have this item will work as expected, and will open the characters palette.

CR not working for me with VS2010

OK with VS2008 I had no problem.. But with VS2010 I can't get Crystal Reports working at all...
I have installed
- VS 2010 Sp1
- Full Crystal Reports 2008 Sp3
- CRforVS_13_0_1
- CRforVS_redist_13_0_1 (for 32bit and 64bit)
I have tried unistalling everything including VS and rebuilding my machine but that didn't work....
What happens is when I create a new project and add a crystal report (or try to use any existing ones) the code behind files are blank and I have the error as below...
Error     1     Custom tool error: "Code generator 'ReportCodeGenerator' failed. Exception stack = CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: The Report Application Server failed
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath, String resourceNamespace)
   at CrystalDecisions.VSDesigner.CodeGen.ReportCodeGenerator.GenerateCode(String inputFileName, String inputFileContent)"     c:\users\joele\documents\visual studio 2010\Projects\WindowsFormsApplication1\WindowsFormsApplication1\CrystalReport1.rpt     1     1     WindowsFormsApplication1
Can someone help with this please?
Edited by: jeisner on Sep 13, 2011 9:14 AM

Yes as per list I have CR for VS installed   "- CRforVS_13_0_1"
I can modify CR reports fine within the designer but get that error on build and the code behind files are not generated..
As to other points...
"No C:\temp folder" - I have one
"x86 or x64 only, don't use AnyCPU" - Tried all three and same issue
"Framework for your project must be set to Full version and not the Client." - It is
"If you are using ADO.NET ... ... " - I am not, I can start a fresh project and do nothing else other than add a crystal report and it does not work..
Thanks for the suggestions, any more possible "gotcha's" with this version of crystal reports???
Edited by: jeisner on Sep 14, 2011 2:07 AM

Autofill works for forms with autocomplete="off"

Similar Messages

Maybe you are looking for