Automaitc Updates through SCCM 2012 not showing up on the updates status

Hi,
I have configured Automatic Update rule on SCCM 2012 and it works fine but on the client machine i see this.
This is the update status it shows which means updates are not being installed since long time.
But when i see the update history it shows me the latest updates installed.
Why would this happen? please suggest.
Regards,
Maqsood
Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation Certified

Hi,
That is as expected as the updates are installed using SCCM and not the Windows Update Agent, if you deploy a client using SCCM OSD and install software updates using SCCM and not WSUS/Windows Update it will actually say:
"Updates were installed: Never"
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

I am having problems when i have minimized windows and try to open a new window it will open all minimized windows along with the new window. It just changed when mozzilla updated. It did not do this before the update.

I am having problems when i have minimized windows and try to open a new window it will open all minimized windows along with the new window. It just changed when mozzilla updated. It did not do this before the update. Before the update if i had minimized windows they would stay minimized when i opened a new window. Please help ,I would guess it is just a setting somewhere but i cannot figure out where the setting is. Thanks jason

This issue can be caused by the ASK.com Toolbar.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

HT1386 my updated iPhone five is not showing up in my updated iTunes on my updated mac book

why is my iphone 5 not showing up in my updated itunes on my updated mac book? Im using osx 10.9.1

Hi there maidenfan22av,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
-Griff W.

HT201270 My ipad is displaying the carrier settings update box but does not respond to either the "update now" button or the "not now" button and has totally frozen. The ipad cannot switch off as I need to clear this box before I can "slide to shut down".

Can anyone help me with carrier settings??? My ipad is displaying the carrier settings update box but will not respond when I press "update" or "not now". I have tried to switch the ipad off, but cannot "slide to shut down" as I need to clear the carrier settings box first!! HELP PLEASE!!!!

Have you tried a reboot? Hold down the power and home buttons simultaneously. Ignore the Slide to Power Off prompt if it pops up. The display should go dark, and the Apple logo should appear as it begins a reboot. This is a soft reboot - it does not erase data.

RPC server is unavailable when trying to download software updates through SCCM 2012

I have read plenty of articles concerning RPC server problems and non of them seem to relate to this issue. I have been trying to set up my CM 2012 server to deploy software updates and I am to the point of just needing to filter the updates, download
and deploy them. When I try to download the updates from the internet, I get an RPC server unavailable error and it closes. I have checked the RPC service and all of its dependencies, verified that it is looking for a correct microsoft update service
point, disabled my firewall and opened all ports on the firewall just to verify that it wasn't that, and ping tested a few other external sites (aka: Newegg.com/google.com) to see if I could get replies (which I did).
Not really sure where to go from this point. Anyone else encounter this before or know how one might fix it?
Jeffrey IT - Tech Support Tier 2 Buyseasons, INC

Apologies, it was only like 6 lines in CMTrace and I thought it posted ok. Here is the text version:
Trying to connect to the root\SMS namespace on the syscenter.BUYSEASONS.com machine. $$<Software Updates Patch Downloader><06-28-2012 15:46:04.463+300><thread=4756 (0x1294)>
Connected to \\syscenter.BUYSEASONS.com\root\SMS $$<Software Updates Patch Downloader><06-28-2012 15:46:04.465+300><thread=4756 (0x1294)>
Trying to connect to the \\nbsccm01.buyseasons.com\root\sms\site_NB2 namespace on the nbsccm01.buyseasons.com machine. $$<Software Updates Patch Downloader><06-28-2012 15:46:04.467+300><thread=4756 (0x1294)>
ConnectServer() failed to connect to nbsccm01.buyseasons.com $$<Software Updates Patch Downloader><06-28-2012 15:46:04.480+300><thread=4756 (0x1294)>
ERROR: DownloadContentFiles() failed with hr=0x800706ba $$<Software Updates Patch Downloader><06-28-2012 15:46:04.481+300><thread=4756 (0x1294)>
Trying to connect to the root\SMS namespace on the syscenter.BUYSEASONS.com machine. $$<Software Updates Patch Downloader><06-28-2012 15:46:04.680+300><thread=4756 (0x1294)>
Connected to \\syscenter.BUYSEASONS.com\root\SMS $$<Software Updates Patch Downloader><06-28-2012 15:46:04.682+300><thread=4756 (0x1294)>
Trying to connect to the \\nbsccm01.buyseasons.com\root\sms\site_NB2 namespace on the nbsccm01.buyseasons.com machine. $$<Software Updates Patch Downloader><06-28-2012 15:46:04.683+300><thread=4756 (0x1294)>
ConnectServer() failed to connect to nbsccm01.buyseasons.com $$<Software Updates Patch Downloader><06-28-2012 15:46:04.685+300><thread=4756 (0x1294)>
ERROR: DownloadContentFiles() failed with hr=0x800706ba $$<Software Updates Patch Downloader><06-28-2012 15:46:04.687+300><thread=4756 (0x1294)>
Trying to connect to the root\SMS namespace on the syscenter.BUYSEASONS.com machine. $$<Software Updates Patch Downloader><07-23-2012 16:47:05.531+300><thread=7108 (0x1BC4)>
Connected to \\syscenter.BUYSEASONS.com\root\SMS $$<Software Updates Patch Downloader><07-23-2012 16:47:05.550+300><thread=7108 (0x1BC4)>
Trying to connect to the \\nbsccm01.buyseasons.com\root\sms\site_NB2 namespace on the nbsccm01.buyseasons.com machine. $$<Software Updates Patch Downloader><07-23-2012 16:47:05.552+300><thread=7108 (0x1BC4)>
ConnectServer() failed to connect to nbsccm01.buyseasons.com $$<Software Updates Patch Downloader><07-23-2012 16:47:05.565+300><thread=7108 (0x1BC4)>
ERROR: DownloadContentFiles() failed with hr=0x800706ba $$<Software Updates Patch Downloader><07-23-2012 16:47:05.566+300><thread=7108 (0x1BC4)>
Trying to connect to the root\SMS namespace on the syscenter.BUYSEASONS.com machine. $$<Software Updates Patch Downloader><07-23-2012 17:04:05.693+300><thread=5124 (0x1404)>
Connected to \\syscenter.BUYSEASONS.com\root\SMS $$<Software Updates Patch Downloader><07-23-2012 17:04:05.694+300><thread=5124 (0x1404)>
Trying to connect to the \\nbsccm01.buyseasons.com\root\sms\site_NB2 namespace on the nbsccm01.buyseasons.com machine. $$<Software Updates Patch Downloader><07-23-2012 17:04:05.696+300><thread=5124 (0x1404)>
ConnectServer() failed to connect to nbsccm01.buyseasons.com $$<Software Updates Patch Downloader><07-23-2012 17:04:05.699+300><thread=5124 (0x1404)>
ERROR: DownloadContentFiles() failed with hr=0x800706ba $$<Software Updates Patch Downloader><07-23-2012 17:04:05.700+300><thread=5124 (0x1404)>
Nbsccm01 is also our migration server that is no longer in service, is there anyway to disconnect this server permanently?
Thanks!
Jeffrey IT - Tech Support Tier 2 Buyseasons, INC

HP Printer Driver Update 1.1.1 not showing up in software update

i have a HP HP Deskjet D4260 attached to my macs, but the 1.1.1. update doesn't show up in software update. (as 1.1 did)
i read here
http://www.apple.com/support/downloads/hpprinterdriver111.html
that the update will only be visible if the printer is connected to your computer or a print queue has been created for an earlier version. well they are.
any suggestions here as i remember that with 1.1 there was only about 100mb installed of the total of 450mb.
tia m.

http://support.apple.com/kb/HT1893
here it states that the DeskjetD2400 series drivers are still at 2.3.2. but i thought that with these updates also general printing software is updated
see also here: http://discussions.apple.com/thread.jspa?threadID=1710387&tstart=0

About bash bug update being available but not showing up in software updates???

Apple has posted a Bash Bug update (as of 9/29/14) for various versions of OS X. It can be downloaded on the downloads page. But why doesn't it show up as an Apple update on the Software Updates page???
When I go there it says "there are no updates available". What's up with that???
thanks.. bob

Have you tried going to the App Store and finding the update there? Or getting the updater from the Apple Downloads site: OS X Mavericks 10.9.1 Update
OT

Update 10.9.1 not showing up in 'software update'

Late 2013 MBA
fully updated on 10.9
keynote, pages, numbers updated also
all firmwares and camera raw updates complete
basically it is fully update BUT is not offering 10.9.1 at all
I tried to push each of the offered versions of 10.9.1 to the machine via task server also but the machine wont take any of them
so that plus the fact that the update to 10.9.1 is not even offered to me in software update is very confusing
does any one have any advise for me?

Have you tried going to the App Store and finding the update there? Or getting the updater from the Apple Downloads site: OS X Mavericks 10.9.1 Update
OT

Cannot Download Updates In SCCM: There was an error downloading the update (16389)

When trying to download and deploy updates using SCCM we receive this error message everytime. Despite that, the patches always seem to download to the specified folder.
I have searched the forums, this is not due to an expired update and a reboot has not fixed it (in fact we had the exact same error message with the previous site installation).

I encountered this error a few times when creating my initial patch deployments. On Server 2008 R2, I found that when it occurs I can fix it with a couple methods:
Control Panel > Internet Options > Security, select the "Internet" zone, uncheck "Enable Protected Mode", and click OK. Close and restart IE if necessary. After disabling protected mode, retry the patch download.
If the first option didn't fix it, close and re-open the Configuration Manager Console and retry the patch download.
I've had a 100% success rate with this. Of course, you should re-enable IE protected mode when finished.

Can't update apps and does not show that I can update the iPad?

When I try to update apps it says that I need to update to iOS 6 or later. When I try to update it says that iOS 5.1.1 . How do I get the iOS updates I need so that I can update my apps?

If you have the iPad 1 the highest iOS level it can be updated to is iOS 5.1.1. If App updates require iOS 6 or higher you will not be able to get them.

Updates Don't Show Up in the Update Tab

(I did find a discussion to this effect, but that discussion appears to have gone quiet now, so I will try again.)
For around 2 weeks now, my iPad (and only my iPad – my iPhone is fine) shows app updates to be available, but when I go into the App Store, and hit the "Updates" tab, the apps to be updated do not show up there.
I can explicitly update them by showing all apps, finding the ones that need updates, and hitting the update button for each of those apps. However, they do not show up in the "updates" tab.
I've tried restarting the App Store app, and rebooting the entire iPad, neither of which helped.
Any ideas what's happening here?

I've had the same issue and found the solution in an older thread. This is what fixed it for me:
1- did a hard stop of the App Store app
2- changed date to 2 years into the future
3- opened App Store app and I get an error indicating I can't connect to the store (this is expected)
4- closed the App Store app
5- did another hard stop of the App Store app
6- changed date back to automatic setting
Opened App Store app and the updates appeared and worked fine.

Windows 8.1 clients are not detecting updates deployed to them through SCCM 2012 R2

Hello,
We are using SCCM 2012 R2 to deploy software updates.
On Windows 8.1 SCCM does not show certain updates as being needed and isn't deploying them to the clients even though Windows Update will show them as high importance. These same updates are being detected and deployed to Windows 8 clients successfully.
I believe that the update catalog that WSUS uses may have some incorrect detection rules for the following updates:
2917933
2913320
2913270
2913152
2909569
2904440
2904266
2903939
2899189
2893984
2893294
2892074
2916626
2898785
My automatic deployment rules include Windows 8.1 in the product category. I have even created a standalone rule for Windows 8.1 that builds a new package and the behavior is the same.
We only have a handful of Windows 8+ clients so this hasn't been a big issue but others may want to keep an eye out.

I am also running into this issue. After "checking online for updates" on one of my machines in office I found that there were 21 important updates for my 8.1 box. When I cross reference them in SCCM under All Software Updates, it appears these
8.1 updates are not listed. They are however listed for all other OS.
10 seconds after typing this, I went in to verify my WSUS -> Products and Classifications settings and come to find 8.1 and 2012 R2 weren't selected, even though it's an option in SCCM. Go figure! This wasn't the end though. After
running a Synchronization, my issue still wasn't resolved. Went back to check my settings and they again were changed back to having these OS unchecked. Finally, a solution! I found that in SCCM, under Administration tab, Site Configuration
> Sites > ABC - Mysitename, right click and scroll down to "Configure Site Components" > Software Update Point. This setting (although the same as is in WSUS) takes precedence, thus was rolling my settings back to the original configuration
in WSUS.
So long story short, even though my automatic deployment rules stated approve all windows 7/8/8.1 criticals/importants, 8.1 was getting skipped for the most part because my WSUS server wasn't syncing with Microsoft for all of the updates I required. I
did have a couple of updates that squeezed through because they were categorized as "Security Updates for Windows 8, 8.1".
Not sure if this is the solution you were looking for, but your thread got me started in the right direction, hopefully this response helps in the same way!
Thanks!

SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Same Windows Update installed multiple times through SCCM 2012

Hello There,
I am using SCCM 2012 to deploy critical and important updates through Automatic Deployment Rule it works fine but i have noticed recently on the client machines i see the same KB / update is installed multiple times.
Why would this happen? Please suggest.
Regards,
Maqsood
Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation Certified

Hi,
My computer also have duplicated updates installed. I uninstalled one of them that needed a restart. Then uninstall another one after restart, it hadn't asked for restart and the uninstall process was very fast. So I think the update only installed one time,
the others are duplicated records.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Client not receiving the software update FROM SCCM 2012 R2

We have SCCM 2012 R2 installed and configured for SUP.and i have synchonice the SUP with WSUS server in the same which is there in the same machine.
Now i can able to deploy the software update from SCCM 2012 R2 without any erro to the windows 7clients, but client side when i check there is no update installed in the clients , but seems there is no error in the client logs

Hi,
I'd start with running a "Software Updates Scan Cycle" from the configuration manager control panel applet and check the log file Windowsupdate.log, WUAhandler.log.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Automaitc Updates through SCCM 2012 not showing up on the updates status

Similar Messages

Maybe you are looking for