Update 10.9.1 not showing up in 'software update'

Late 2013 MBA
fully updated on 10.9
keynote, pages, numbers updated also
all firmwares and camera raw updates complete
basically it is fully update BUT is not offering 10.9.1 at all
I tried to push each of the offered versions of 10.9.1 to the machine via task server also but the machine wont take any of them
so that plus the fact that the update to 10.9.1 is not even offered to me in software update is very confusing
does any one have any advise for me?

Have you tried going to the App Store and finding the update there?  Or getting the updater from the Apple Downloads site: OS X Mavericks 10.9.1 Update
OT

Similar Messages

  • HP Printer Driver Update 1.1.1 not showing up in software update

    i have a HP HP Deskjet D4260 attached to my macs, but the 1.1.1. update doesn't show up in software update. (as 1.1 did)
    i read here
    http://www.apple.com/support/downloads/hpprinterdriver111.html
    that the update will only be visible if the printer is connected to your computer or a print queue has been created for an earlier version. well they are.
    any suggestions here as i remember that with 1.1 there was only about 100mb installed of the total of 450mb.
    tia m.

    http://support.apple.com/kb/HT1893
    here it states that the DeskjetD2400 series drivers are still at 2.3.2. but i thought that with these updates also general printing software is updated
    see also here: http://discussions.apple.com/thread.jspa?threadID=1710387&tstart=0

  • About bash bug update being available but not showing up in software updates???

    Apple has posted a Bash Bug update (as of 9/29/14) for various versions of OS X.  It can be downloaded on the downloads page.  But why doesn't it show up as an Apple update on the Software Updates page???
    When I go there it says "there are no updates available".  What's up with that???
    thanks.. bob

    Have you tried going to the App Store and finding the update there?  Or getting the updater from the Apple Downloads site: OS X Mavericks 10.9.1 Update
    OT

  • Where is mavericks? not showing up in software update?

    where is mavericks? not showing up in software update?

    Use this link
    https://itunes.apple.com/app/os-x-mavericks/id675248567?mt=12
    All can download from here NOW!

  • HT1386 my updated iPhone five is not showing up in my updated iTunes on my updated mac book

    why is my iphone 5 not showing up in my updated itunes on my updated mac book?  Im using osx 10.9.1

    Hi there maidenfan22av,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    -Griff W. 

  • 11.0.3 update not showing up in software update.

    I am currently running itunes 11.0.2 on OS X 10.8.3.  Checking for an upate for itunes from within the app indicates an update is available.  Choosing to download it brings up the app store.  App store checks and retruns that no updates are available.  Any ideas?  I guess I could go ahead and download the install image for 11.0.3.  Just curious why it isn't showing up.
    thanks.

    see:
         software update not showing updates

  • ITunes 9.1.1 does not show up in Software Update

    I am aware that iTunes 9.1.1 is availible for download at Apple's website, however for some strange reason iTunes always alerts me to upgrade to 9.1.1 but when I open Software Update it says that "Software Update doesn’t have any new software for your computer at this time." I am currently running iTunes 8.2.1 if that helps any, and I would just like to know why the newest version does not show up in my Software Update and if there is anything that can be done to fix this.

    download 9.1.1 from here: http://www.apple.com/itunes/download/.
    JGG

  • Security Update 2008-008 1.0 PPC not showing up in software update panel

    Security Update 2008-008 1.0 PPC is not showing up in the software update panel of a powerbook g4 with os 10.4.11. anybody else experiencing this ?
    tia

    HI, try Limnos' suggestion here...
    http://discussions.apple.com/thread.jspa?messageID=8633164#8633164

  • Automaitc Updates through SCCM 2012 not showing up on the updates status

    Hi,
    I have configured Automatic Update rule on SCCM 2012 and it works fine but on the client machine i see this.
    This is the update status it shows which means updates are not being installed since long time.
    But when i see the update history it shows me the latest updates installed.
    Why would this happen? please suggest.
    Regards,
    Maqsood
    Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation Certified

    Hi,
    That is as expected as the updates are installed using SCCM and not the Windows Update Agent, if you deploy a client using SCCM OSD and install software updates using SCCM and not WSUS/Windows Update it will actually say:
    "Updates were installed: Never"
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • App store not showing up in software update..  Any work around for this?

    When I run software update it runs and then says that all software is up to date. I don't have an option to install the app store.. Is there any other way to install it?

    I totally understand the confusion. That's how I ended up here on the discussion. I am running 10.6.5, so according to Apple's instructions below, this should have worked. Apparently, they need to correct their instructions. Here's what the App Store page says about installing it:
    The Mac App Store is available as a free software update for Mac computers running Mac OS X v10.6 or later. If you have an earlier version of Mac OS X, you will need to upgrade to Mac OS X Snow Leopard.
    1. Update your software.
    Click the Apple icon, then choose Software Update. A dialog will appear on your desktop. Click the Install button in the dialog to begin the installation. You will be instructed to restart your Mac to complete the process.
    Thanks for clearing it up.

  • Why I'm on 10.7.4 and Safari 6 is not showing up in Software Update?

    No way to make Safari 6 appearing in Software Update...
    Apple why no single Safari 6 download?

    Have you tried going to the App Store and finding the update there?  Or getting the updater from the Apple Downloads site: OS X Mavericks 10.9.1 Update
    OT

  • My iPhone 4 is not showing me the ¨software update¨

    I have an iPhone 4 and i wanna update to iOS 7 but neither my phone nor itunes is showing me that i have an update, everytime i check it says "your software is up to date". Anyone can help me? iOS 7 is supposed to be available to the public today, however it doesnt seem to me. Thanks for any help

    It's not out yet, wait.

  • Ipods not showing up after software update

    Since updating to itunes 8.0.2.20, I cannot access my ipods. I have three. When I plug them into my desktop machine (XP home), I hear the sound that indicates a new USB device, and the ipods will show that they're connected and charging.
    But: they don't show up in itunes, so I cannot add or delete anything to them.
    Please advise.

    Have you tried going to the App Store and finding the update there?  Or getting the updater from the Apple Downloads site: OS X Mavericks 10.9.1 Update
    OT

  • Why is safari 5.1.2 not showing up in software updates?

    I am running Lion server and the Safari 5.1.2 update isn't there.
    Any ideas?

    Thanks Wardy22, that indeed did it.  Annoying that it's a bit obscure but it works. 
    CAVEAT EMPTOR:
    I host updates for Lion and SnowLeopard on the same box.  I see that there are 2 Safari v5.1.2 updates.  One is 47MB (Product ID:041-2852) and the other is 38.3MB (Product ID:041-3552).  I little digging in the sucatalog file shows that 2852 is for SnowLeopard and 3552 is for Lion.  If you've got a mixed environment, you've got a problem!
    It seems silly but if this is supposed to be an update server, why should I have to choose a version of Safari?  Shouldn't ALL updates be available?  I'm just saying...

  • Can't update apps and does not show that I can update the iPad?

    When I try to update apps it says that I need to update to iOS 6 or later. When I try to update it says that iOS 5.1.1 . How do I get the iOS updates I need so that I can update my apps?

    If you have the iPad 1 the highest iOS level it can be updated to is iOS 5.1.1. If App updates require iOS 6 or higher you will not be able to get them.

Maybe you are looking for

  • Want to type in my phone contacts with my computer (NOT tiny buttons on phone)

    OK so I do not use Outlook or Yahoo or any of the like type services and even if I did, it would just be email addresses and not phone numbers.  I need to input all my phone contacts (about 200) into my 8330.  I cannot fathom how long it is going to

  • Active x problem

    Hi, I have a slideshow on my homepage, what is happening is that on all browsers the active x is automatically blocked and the slideshow does not work. Is there anything I can do? slideshow can be found at www.photomarvel.co.uk thanks for any advice

  • Iphoto & Preview will not open after software update

    I did a software update on my macbook pro yesterday, and cannot open iPhoto or review. I am running on OSX 10.7.2 and the iPhoto is '11 9.2.1 Preview is 5.5.1 When i open either app nothing comes up, only the bar at the top of the screen changes to w

  • Problems updating

    I have tried to update iTunes from 11.1.3.8 to 11.1.4 but it will not install.  I get a runtime error message R6034 and iTunes error7 (windows 1114).  I also had to restore my PC to a prevoius date to be able to get rid of these messages.  Anyone els

  • Can you add metatags to iWeb as an html snippet?

    I was wondering if there is a possibility to use the html snippet utility in iWeb as a means to incorporate meta tags and, if so, how. Thank you for your advice.