Automate Transport Package ID Generation

Hi,
I had a look at the "<i>How to... Automate External ID Generation</i>" where the way to implement ID generation from the xRPM Backend is discussed.
It was really interesting and I wondered if the same could be done for the <b>Transport Package Id's</b> ?
Has anyone ever implemented things regarding that particular aspect ?
Thanks in advance !

Old question

Similar Messages

  • Returnable transport packaging for Subcontracting material

    Dear All,
    I have a doubt regarding a new process to be followed in our company. We need to issue raw material to our subcontractor for processing. We also intend to send packaging material to the subcontractor along with the raw material. Ie We are sending the raw material to the subcontractor along with the packaging material ( say, in boxes).
    I would like to know how to address this issue.
    What We tried
    Standard SAP is allowing the vendor's Packaging material to be "received" from the vendor when we Purchase material from the vendor using movement type 501 'M'. After this, we are able to see this as a "special stock" as RTP ( Returnable Transport Packaging ) in T code MMBE. After this we can issue the packaging material  back to the vendor using movement type 502 'M' . There is also a provision to send " our" packaging material to a customer through a Sale order, and receive it back from them.
    But is there any standard process for sending "our" packaging to a subcontractor and receiving it back from them ?
    We also tried including the packaging material in BOM, and sending it through 541 movement  but in this case, when we perform Goods receipt ( 101 movement of the parent material ), the packaging material gets consumed, which should not happen. We want them back in stock.
    We also tried using the option "Non - Ordered item" for the packaging material while performing Goods Receipt of the parent material. But this would increase the stock of the packaging material without us even issuing the same to the vendor initially. ie  More stock will be there than is actually present.
    So how else do we address this issue ?
    Regards,
    Velu

    Hi Velu,
    This scenario can be automated as well in BOM.
    While maintaining the BOM for the subcontracting material, include the packaging component as twice, but one with negative quantity. PFB screen shot.
    Also turn of the costing relevancy indicator and maintain material provision indicator as "K"(customer material) for both the line item.
    So while doing GR for the sub contracting, system post automatically 543 and 545. Hope this is useful, if it is so, your rewards are awaited .
    Regards,
    Chinna

  • Automatic Transport Requests and Support Pack Stacks using CHaRM

    Hi Experts,
    Could you please give your valueable inputs on below Requriements :
    1. All Transports Requests needs to be Automatically moved from Solution Manager using CHaRM.
    2. Automatic Support Package Stacks needs to be updated using Solman - CHaRM
    would be helpful if any one could send the documentation on above requirements.
    Regards,
    Vijaysateesh

    Hi,
    >
    > 1. All Transports Requests needs to be Automatically moved from Solution Manager using CHaRM.
    Yes. You can schedule a periodic job (say for example daily 6M) to import all released transport requests from  QAS to PRD of a maintenance cycle/project. This is the task "Import Transport Request(Backround)" given in task list (tcode-SCMA) of a maintenance cycle.
    > 
    > 2. Automatic Support Package Stacks needs to be updated using Solman - CHaRM
    I haven't done this. But this is the  task "Import Support Package" given in task list (tcode-SCMA) of a maintenance cycle.
    I hope there is no specific documents for these. It's the same documents related to ChaRM.
    Regards
    Sanjai

  • Returnable Transport Packaging Material In ASN ( EDI -856)

    Hi,
    We are working on inbound delivery creation with returnable transport packaging (RTP) materials. We want to create inbound delivery with RTP and we are passing RTP material in E1EDL24 without reference document (i.e. purchase order or PSA) as we are receiving without any reference.
    We are using message type # DESADV & Basic type:DELVRY03. Currently, IDOC is failing and it's looking for reference PO for RTP material but we don't have RTP item on PO.
    Any suggestion/guidance on how to handle RTP material with ASN and create inbound delivery with RTP material ? In otherword, I am looking for IDOC segement mandatory fields for RTP material.(Note : I can add item in inbound delivery without any reference but not able to do with ASN)
    Thanks.
    Regards,
    Ravi

    Hi Velu,
    This scenario can be automated as well in BOM.
    While maintaining the BOM for the subcontracting material, include the packaging component as twice, but one with negative quantity. PFB screen shot.
    Also turn of the costing relevancy indicator and maintain material provision indicator as "K"(customer material) for both the line item.
    So while doing GR for the sub contracting, system post automatically 543 and 545. Hope this is useful, if it is so, your rewards are awaited .
    Regards,
    Chinna

  • How to create transport package

    Hi gurus,
    I'm working on afresh BW system and need to create the transport package
    By defaults all the objects are stored under $TMP package
    Please advice
    Thank you

    goto rsa1--> transport conenction --> collect all your objects which you know that are in $TMP package..
    right click on each object and click on change package --> it will prompt a window asking for package name --> enter your package and click ok -- it will ask for transport request.
    If package is not created in the system then all the developments will be automatically collected in to $TMP package.
    use Transaction SE80 --> select Development co-ordination here u can create package ...
    check with BASIS if the package is created for your developments in BW dev system.

  • Send automaticly a report after generation

    HI,
    how to send a report (the result of tcode MB52 for exemple) automaticly by mail after generation by job.
    thx

    Hi Anda,
                 You can take the help of a basis Person, Via T-code SM36, create a variant in MB52, and keep on running the same variant and save it,
    create the recipient group for whoom you want to send the, copy the Program name for MB52 (RM07MLBS), and goto SM36, give in the program and recipient list.
    then goto SM37, run the Back ground job,
    BUt it is not as easy as Explained., But you can always take help from the BASIS guy.
    Hope it helps you.
    Regards,
    YK

  • How to create a new TRANSPORT PACKAGE in BI 7.0

    Two issues
    1) How to check avaliable TRANSPORT PACKAGES in BI 7.0 and
    2) How (steps) to create a new TRANSPORT PACKAGE,So that i can assign all the transport request to that package.
    Thanks

    Hi,
    Steps for creating TRANSPORT PACKAGE
    Go to SE80 and in the obj edit mode select Select DEVELOPMENT COORDINATION tab where u can giv ur PACKAGE NAME and create the package
    Select your Software Component ,Transport Layer
    Package Type = NOT A MAIN PACKAGE and create a request
    and save it.
    Assign points if useful..
    Regards,
    NR
    Edited by: N R Pradeep Reddy on Apr 10, 2008 11:29 AM

  • Transports - automatic transports

    Hi Friends,
    For automatic import of transports to QA , i have schedule the below job
    TMS_00000001IMP.ALL ,
    This job is finishing with the below  error
    Transport control program tp ended with error code 0212
    Diagnosis
    An error occurred when executing a tp command.
      Command: IMPORT ALL  pf=/usr/sap/trans/<SID>/bin/TP_DOMAIN
      Return code: 0212
      Error text: could not access file as supposed (see dev_tp or S
      Request: ALL
    System Response
    The function terminates.
    Procedure
    Correct the error and execute the command again if necessary
    I have checked the permissions and corrected the same. But still i am getting the same error. Hence the automatic transports to QA is not working.
    Please some one help me to correct the same.
    Thanks
    anup

    Hi,
    What the SAP system's TP system Log is telling ?
    (STMS->Overview->Imports-->click on Goto -> TP System log)
    Operating System ?
    Regards,
    Bhavik G. Shroff

  • Unable to upload Transport Package in portal

    Hi
    Previously i have transported .epa file(Trnasport Package) from dev to acc, it worked fine there.now when iam trying to upload the same in qas portal its getting error like "could not upload file" .can any one assist me with the solution

    Sekhar,
    Please check the transport_logger trace (logs/transport.log) to troubleshoot transport problems.
    Set the loglevels to analyze the transport problems debug in the pcdstartup.properties file for the categories pcd.tracelevel.basictransport and pcd.tracelevel.GI.Transport
    Please check Note 679516: Central Note for the Transport Package Editor
    Please check Note 743857: Upload issues in cluster scenarios
    Please examine this file for pure UI problems like the editor does not load or an object cannot be added to a transport package. pcd_admin_tools_logger (logs/pcdadmintools.log)
    Hope it helps.
    Regards,
    Mona

  • Error while importing Transport Package ?

    Hi,
    I have created a Transport Package which includes the following things :
    1. Two folders
    2. Two iViews
    3. one .par file
    I am trying to Import the above package by choosing the option 'Source for package file - client' and then browsing where my .epa file is placed.
    When i click the Upload Button I am getting the following error -
    'Error extracting the package file. Check the log file for details'
    What can be reason for this error?
    Regards,
    Vikas Khandpur

    Hi Vikas
    It is not generally advised to Package a .PAR file into a .EPA file. Because a .PAR file may depend on parts that are not included in the .EPA file which might cause incosistent transports.
    You can directly upload a .PAR file into the Portal. Just go to System Administration -> Support -> Portal Runtime -> Administration Console and upolad the .PAR file.
    Try removing the .PAR file from the Transport Package and download the exported .EPA file. Import this new file and see if it works this time.
    Hope that helped
    Best Regards
    Priya

  • Transport layer and transport package

    I have a fundamental query on transport package and layer.
    Objects are classified in packages depending on the project and put in $TMP or test package else they are local ? Only objects belonging to a transport package can be transported , others are not ? How transport package is defined ? All objects must be a part of transport package else can not be transported ?
    ABout transport layer, I understand this is used to define which path objects will take during transport particularly when there are multiple transport routes. But what are the advantages of it ? How we can define it (trx code/menu path) ?
    Is it mandatory to use transport package and layers ?

    Hi Mike,
    Just to clarify a few basic concepts:
    A transport package (formerly called a "development class", a term you may still encounter) groups related development objects. Whenever you create a new development object (table, program, ...) you have to assign it to a package; the object is then placed into a transport request. Alternatively you can indicate it is a local object (its package is then "$TMP") but such an object is non-transportable.
    A transport layer identifies the route that transportable devmt objects must follow. Typically in your system you will have two layers: a layer usually called Zxxx (with xxx = SID of your development system) is used for your own developments. Another layer called "SAP" is used for transporting SAP objects, for example changes to standard SAP code implemented via transaction SNOTE and recorded in repairs. Without the "SAP" layer in place, repairs would be non-transportable.
    Each transport package belongs to a layer. You assign the layer when you create a new package in transaction SE80. You can change the layer later on, but this is rarely needed and can cause quite a few side-effects. SAP objects always have layer "SAP". The layers themselves are managed in STMS, under "Transport Routes".
    Hope this clarifies things,
    Rgds, Mark

  • Problem in Importing Transport Package in Quality

    Dear All,
    I had created an Transport Package on Development Server of EP.
    That transport package has got three ivews and one work set and two role.
    I downloaded that Transport package  ".epa" file on my local machine.
    I tried to Import that ".epa" file in Quality Server of Ep i am getting an error "Could not upload file. Check the log files for details."
    I need to know how to resolve this problem.
    Please help fast.
    Regards,
    Swapnil Indulkar

    Hi swapnil,
    Whats the error you are getting in Log file.
    once check it provide the details here. and at the time of Exporting in EP Development is it given the sucess message with '0' errors?
    Check the log file in <host:portno/nwa-> Monitoring --> logs and traces
    Regards
    Mahesh

  • Portal Run time error when created a seperate role for Transport package.

    Hi Experts,
    I have created a seperate role for Transport Package(import/export iviews).
    Normally we have transport package functionality in system admin.
    Below steps i followed for creating the new role(trans admin)
    1.Copied SAP provided system admin role to a seperate folder.
    2.Deleted reamining portal objects(like UWL, portal display etc ..) except transport packege workset.
    3.Renamed the role to trans admin.
    I have assigned that role to my self, it is working fine to me when i clcik on export and import.I have super admin role.
    when i assign this role to some portal users, Export is not working.
    when user clicks on Export role they are getting below error.
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.Portal/medium_safety/com.sap.portal.appdesigner.contentcatalog/components/Framework).
    Exception id: 12:10_31/08/09_0031_21763550
    See the details for the exception ID in the log file
    By looking into exception iD also, same error access denied it is showing.
    Please Advice.
    Thanks
    Sony.

    Hi Raghu,
    Thanks for the reply.
    I have given full permissions to all users to this trans admin role before itself.
    Thanks in advance.
    Sony.
    Edited by: ambica sony on Aug 31, 2009 1:53 PM

  • Automatic transport not working

    Hello,
    Could you please help me.
    after the offline backup, the automatic transport from DEV to QAS not working.
    when i check the tools transport on STMS , i tak this error.
    DB Connect ==> Link to database failed.
    Offline call ==> connect failed
    Best Regards,
    nana

    Have you automated the import process in DEV 005 ?
    Then the job will be running in the system.
    TMS_0000000003TMS_TP_IMPORT.
    Regards,
    Raja. G

  • Assigning query elements to a transportable package

    Hi experts,
    when i create a query and want to transport it i have to assign it to a transportable package. The problem is that a query has a big number of elements which are assigned the package &TMP. I have to assign all these elements to a transportable package to transport. Is there a possiblility to assign all of it to a transprtable package in one step?
    Thanks for your help in advance.
    Best Regards,
    Ali

    Hi Ali,
    I know this is more manual work.
    But you can do this way -->
    In the transport connector you have a push button called PACKAGE. Click on it and here you can filter on ibject type as ELEM now you will get all the elemements which are there in your system.
    Now you need to select the required ELEM which are belongs to your query and then say OK this will prompt a popup to change the package. Now you can change the package here and then refresh the screen to see the changes.
    Hope this resolves your issue.
    Thanks
    Murali

Maybe you are looking for