Automated monitoring for backend system connectivity

HI ,
I have a requirement to monitor the system connectivity from portal to back-end (ISU/CRM/UME) and send an alert e-mail to admin group. It should check the connection on a regular interval (say every 30 min) and send a report.
Can anybody suggest?
Thanks,
Manchari N

Yes, tell me your customer and i will implement it ... Jokes apart, what do you expect? That we give you a complete solution? You should use the SCN if you have a specific problem but not to get your work done by others. I don't think you will get much help with such a thread.
Best regards,
Tobias

Similar Messages

  • Error messages for backend systems

    Hello,
    as we have several backend systems connected to our Portal (NW2004s
    SP10) we wonder if there's no possibility to give a user a representative
    message if a backend-system is unavailable? Right now we make backups
    each weekend. So all backend systems are unavailable for a specific
    period of time. If the portal backup is faster than the other backups
    the users accesses the portal and encounter several error messages that
    the there's a problem. Just a message about having a problem is not
    enough. Isn't there any possibility to give a user a representative
    message about the actual state of the backend system? Could the backend
    iViews not check whether the specific system is availbale or not, and
    respond the state? (Prefered with no further coding!)
    Thanks and regards
    Markus Armbruster

    Hi,
    Hope this thread helps: Notification of Server Maintenance in Portal
    Cheers,
    Sunil
    PS: Reward points for helpful answers.

  • System Monitoring for Satellite System in Solution Manager

    Hi,
      I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
    Thanku

    Hi,
    In Solution manager I did below steps. :
    1)  Activated background dispatching in Rz21 (Client : 000).
    2)  Created CSMREG user (In RZ21)
    3)  Generated the configuration file for agent (CSMCONF).
    I down loaded the ccmagent_35-20001346.sar file.
    What are the steps i have to do in satellite system.
    Thanku

  • Disable monitoring for non-system disks.

    Hi all,
    Our backup server dynamically mounts disks (with drive letters) when it's backing up a Virtual Machine.
    These disks are giving a lot of alerts in our monitoring that we don't need, therefore we want to disable monitoring for these disks. What is the best way to disable monitoring for these non-system disks ? As I said, these disks are dynamically mounted and
    unmounted ...
    Any experience with this case ?
    Kind Regards,
    J. Monnens

    This is a bit surprising, since the logical disk discovery only runs once a day, plus it's not supposed to discover network and removable drives.
    That means that your disks are mounted when the discovery runs and that they appear as "real" logical disks...
    Unfortunately there is no "sync time" parameter for this discovery, which would have allowed you to specify the time of the day at which the discovery runs; thus allowing you to set a time at which you know the drives are not mounted.
    Is there any other parameter that could help identifying these specific disks, besides their letter, so you could add them to a dynamic group?
    Otherwise, what you could maybe try is to create your own logical disk discovery based on the native one, but with specific settings that would exclude your drives and then disable the native discovery.
    But this again implies that you have something that would let you identify specifically your mounted drives... Also the native discovery is a quite complex VBS, I wouldn't actually recommend disabling/modifiying it.
    Maybe I could have another idea with more details about your environment...

  • Reg:RTA Plugin's for Backend system

    Hello All,
    We have applied VIRSANH RTA Plugin  and it's related support packs on our backend ECC system and also the system is HR system so is it mandatory to apply VIRSAHR plugin also .What would happen if we don't apply VIRSAHR package .Would it affect the HR functionality of whole backend system or will it only not allow us to use the HR functionality in GRC.
    We are not planning to use any HR functionality in GRC.
    Thanks
    Uday

    Thanks Frank for such a quick reply.The only reason I am asking is what if we go live and later install the VIRSAHR plugin i.e. after a month or two. In the meanwhile will it affect the functionality or affect the backend system.We are on very tight schedule hence all these q's else in ideal scenario we would have installed virsahr and then proceeded with go-live.
    Thanks
    Uday

  • Progress Bar or Progress Monitor for a system command

    Hello,
    I am running a DOS copy command in a Java Swing application. I understand that I
    can implement a Progress Bar or a Progress Monitor if I open the first file, read it,
    and write to a second file. But if I have a need to use the DOS copy command,
    is there a way to implement a Progress Bar or a Progress Monitor for it. If there is,
    could you please point me to some example code?
    Thank you,
    Chris

    Hello Chris,
    you would have to write some native code which peeks or watches the DOS process and its progress. Surely not an easy task. But without that information, how will you set values for the ProgressMonitor?
    What you could do, however, is showing an Indeterminate JProgressBar at DOS process start and make it disappear at process end.

  • Please read the following diagnostics of hardware monitor for my system Macbook Pro

    Following report was generated through "HARDWARE MONITOR" software run on my Macbook Pro:
    CPU A temperature diode 43 degree
    CPU core 1 45 degree
    CPU  core 2 -44 degress
    enclosure bottom side -33 degre
    enclosure bottom side 2  -32
    degre
    enclosure bottom side pos 3 -33 degre
    main heat sink  -37
    northbridge position- 40
    degrees
    smart disk hitachi - 32  deghgress
    smart battery- 33 degrees
    CPU A temperature during system check was 75 degrees.
    please suggest me if it is ok for my new system and whether it would be advisible to use software like "Hardware monitor" to generate such reports intermittantly or there is any other alternative

    Welcome to Apple Support Communities
    Temperatures are normal, so your MacBook Pro is working correctly. Fans will turn on automatically when temperature is high, so don't worry about that. If you see that fans don't turn on, reply back because it would be a hardware problem

  • CCMSPING Availability monitoring for Cluster system

    Hi!
    I would like to know which entry in SOLMAN (tcode RZ21,  field Message Server Host Name) for the CCMSPING Availability monitoring of the satellite systemdoes apply?
    The satellite system was installed as cluster with 2 nodes.
    The problem is that I can see the node in RZ21 (Availability) but no data is shown
    I think possible are the following:
    first node (ABCD1234)
    seconde node (DFRG1234)
    ABCDdbpxx (virtual db node)
    ABCDcipxx (virtual instzance node)
    IP adress of the system
    Thank you very much!
    regards
    Thom

    The CCMSPING is used only to configure the logon check. After this there is a  data collection method CCMS_AVAIL_LOGON_CHECK responsible to update the status.
    The normal configuration the method run in dialog every 5 minutes. Sometimes a solution for this kind of "value is obsolete" is changing to background.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/49/2fb95c65a116b4e10000000a42189d/content.htm
    Anyway, you also should check the ccms_selfmonitoring in RZ20.

  • BI 7.01 SP06 Software Requirements for Backend System (Source System) ECC6

    Hello,
    We currently have a NW BI 7.0 SP18 system and an ECC 6.0 SP17 system.
    We are looking into upgrading our BI 7.0 to a BI 7.0 EhP 1 SP06.
    I've been searching for information on any Software requirements for the ECC 6.0 system to make sure it's compatible with the BI 7.0 EhP1 system.
    My question is :
    Our ECC 6.0 is @ SP 17, which is equivalent to ECC 6.0 EhP 4 SPS 03.
    As a prerequisite for BI 7.0 EhP1 I've read ECC6.0 needs to be at EhP4.
    1). Is it adequet to have Support Packs equivalent to EhP4?(SP17) 
    Or do I need to actually apply EhP4 on the ECC 6.0 system?
    2). What is the requirement from a PI & PI-Basis prespective on the ECC 6.0 system, for it to work with BI 7.0 EhP 1 SP06?
    Our ECC 6.0 currently has PI_Basis 2005_1_700 SP 17.
    Where can I fiind information on this?
    Any insight would be appreciated.
    Thank you.

    As a prerequisite for BI 7.0 EhP1 I've read ECC6.0 needs to be at EhP4.
    1). Is it adequet to have Support Packs equivalent to EhP4?(SP17)
    Or do I need to actually apply EhP4 on the ECC 6.0 system?
    If its a prerequisite then you have to apply it. When we upgraded our systems we upgraded both ECC and BI to EhP4/NW EhP1 and EhP1 respectively.
    2). What is the requirement from a PI & PI-Basis prespective on the ECC 6.0 system, for it to work with BI 7.0 EhP 1 SP06?
    Our ECC 6.0 currently has PI_Basis 2005_1_700 SP 17.
    PI_Basis on both the systems will be 7.01 as they are upgraded as part of NW EhP1. You have to use Maintenance Optimizer for downloading EhP's which will take care of all the dependencies.
    Hope this helps.
    Thanks,
    Naveed

  • How can i find the list of backend systems connected to portal?

    Hi Gurus,
    How can find the back end systems that are connected to portal?
    Please give a clear note on this .......
    Thanks in Advance,
    Dharani

    Hi,
    you can read the following about the system landscape.
    http://help.sap.com/saphelp_nw70/helpdata/en/0d/17df3d2cae445ae10000000a11405a/frameset.htm
    You can verify the JCO connection too.
    Go to http://portal.domain.com:50x00
    Web Dynpro -> Content Administrator -> Maintain JCo Destinations
    Brad

  • Regarding authorization in solution manager for Central system monitoring

    Hi,
    I want to Prevent users from deleting Task logs in central system monitoring
    in solution manager
    I have assigned the roles SAP_SV_SOLUTION_MANAGER_DISP
    But it gives display authorization for everything unable to keep track of
    changes in monitoring
    Can anyone please help me to prevent users from deleting task log history
    Since I have to keep track of one month data
    What can be the suitable role for it ? or what authorization objects i should
    make a change to prevent deleting tasklog.
    Kindly help me in this regard
    Regards
    Sanjeev.S

    Thanks for your prompt reply
    I am not saying about SDDCN
    In transction solution_manager  => opertation set up = > central system
    administation
    we  will do manual monitoring for sattelite systems in this path. what we monitored
    will be entered in task log history.
    So what can be the suitable role to prevent the deleting of the task log history.
    There is option delete task history. if any one by mistake clicked on that ,all the
    records of monitoring will be lost.
    so kindly suggest me a suitable solution

  • Apache Rewrite rule for all backend systems?

    Dear all,
    Could anyone, write and give me the extact working rewrite rule in apache 2.0 for backend systems like R/3 and BW, ICH.
    Paths for bakend systems are as follows.
    R/3= http://r3server.compny.domain.com:r3port/sap/bc/gui/sap/its
    BW= http://bwserver.compny.domain.com:bwport/sap/bw/BEx
    (SSL configured in ICH)
    ICH=http://ichserver.compny.domain.com:ichport/sap/bc/bsp
    Kindly provide the above rules
    Rgds
    PRadeep

    Dear all,
    Could anyone, write and give me the extact working rewrite rule in apache 2.0 for backend systems like R/3 and BW, ICH.
    Paths for bakend systems are as follows.
    R/3= http://r3server.compny.domain.com:r3port/sap/bc/gui/sap/its
    BW= http://bwserver.compny.domain.com:bwport/sap/bw/BEx
    (SSL configured in ICH)
    ICH=http://ichserver.compny.domain.com:ichport/sap/bc/bsp
    Kindly provide the above rules
    Rgds
    PRadeep

  • SRM Local Contract Dumps when same material exists in multiple backend systems

    Hi All,
    We have a scenario of two backend systems connected to SRM system.
    Materials are created with the same number in both the ECC systems and replicated to SRM system .
    Materials are  updated in COMM_PRODUCT in SRM with the respective logical system.
    But when we  creating a local contract by adding the same material system is throwing a dump .
    system is not able to recognize the logical system for the material and material group linked.
    Please let me us know if you have faced any such issue
    Thanks
    Rajesh

    Hi Rahul Nazar,
    RFC connections are working fine for both the logical systems.
    Please find the dump details below :
    Error application is coming up.
    20140429
    TP418
    161636
    r3cap
    https://r3cap.XXXXXXXXXXXXX.net:8101/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif
    GETWA_NOT_ASSIGNED
    Field symbol has not yet been assigned.
    Function: CONVERSION_EXIT_PRID1_OUTPUT of program SAPLCOM_PR_CONVERSION
    Method: ADD_FROM_BLANK_LINES of program /SAPSRM/CL_CH_WD_DOTM_CTR_ITEMCP
    Method: PROCESS_BLANK_LINES of program /SAPSRM/CL_CH_WD_DO_MAPPER====CP
    Method: PROCESS_BLANK_LINES of program /SAPSRM/CL_CH_WD_MAP_DO_TREE==CP
    Method: /SAPSRM/IF_CLL_MAPPER~UPDATE of program /SAPSRM/CL_CH_WD_DOTM_CTR_ITEMCP
    Method: FIRE_EVENT_UPDATE of program /SAPSRM/CL_CH_WD_XO_MAPPER====CP
    Method: /SAPSRM/IF_CLL_XO_MAPPER~FIRE_EVENT_UPDATE of program /SAPSRM/CL_CH_WD_XO_MAPPER====CP
    Method: /SAPSRM/IF_CLL_BO_MAPPER~FIRE_EVENT_REFRESH of program /SAPSRM/CL_CH_WD_BO_MAPPER====CP
    Method: ONACTIONON_ENTER of program /1BCWDY/P8BFGBR5XZLSDCQM136Z==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/P8BFGBR5XZLSDCQM136Z==CP
    Thanks
    Rajesh Kalva

  • How to use logon group of backend systems via reverse proxy

    Hi
    we have setup EP 6.0 in DMZ2 and connected backend servers in INTERNAL network. We have another firewall for DMZ1. In order to provide access to EP and respective backend systems, we have installed two reverse proxy servers on Apache, one in DMZ1 and another in DMZ2. We could able to reach to the backend system successfully in this setup by using proper rewrite rule for virtual systems in order to connect to multiple systems.
    However we have observed that connection for backend systems is established only to respective CI and not to any of the application server, even though we have created "Load Balancing" systems in EP and used the same logon group of backend systems.
    Kindly suggest us if there is any option using which we can establish connection via Load balancing option in this current setup of ours.
    Thanks
    Pradeep

    Hi Mechael/Dutt
    We r using Integrated ITS in WAS 6.40. and we r maintaing seperate entries for each systems in rewrite rule.
    Thanks
    PRadeep

  • Change in backend system

    Hi SRM Gurus,
    Project Scenario is ECC5 as backend system integrated with SRM 4.0( SSP scenario and with Catalog CCM2.0)
    Implementation scenario is Extended classic.
    Backend system will be changed to ECC6 from ECC 5.0 with company code consolidation.
    ECC6 is installed on separate server for implementing changes in FI (separate Dev, QA, Prod environment ) and will be integrated with SRM4.0
    Question is that when we integrate SRM4.0 with ECC6, do we need to run transaction BDLS to change logical system name in SRM for backend system?
    As all product categories and vendor are same in ECC 6.0 will this work.
    Also there is GUID reference in table CRMLSSGUID & CRMPRLS in R3. How this will be taken care.
    Option 2:
    no need to run BDLS in SRM. We need to define new backend system and  replicate all master data (product categories, UOM & vendor master) from ECC6 to SRM4.0.
    SRM experts, please suggest as for me option 2 is suitable way.
    Thanks & Regards,
    Avinash

    Hi SRM experts,
    In Org structure   Product categories will be maintained with Source system (new backend system) in extended attributes. Also for vendors new  backend system maintained in attributes.
    With these settings user will able to see the product categories, vendors pertaining to New backend system.
    Please share your views.
    Regards,
    Avinash

Maybe you are looking for