CCMSPING Availability monitoring for Cluster system

Hi!
I would like to know which entry in SOLMAN (tcode RZ21, field Message Server Host Name) for the CCMSPING Availability monitoring of the satellite systemdoes apply?
The satellite system was installed as cluster with 2 nodes.
The problem is that I can see the node in RZ21 (Availability) but no data is shown
I think possible are the following:
first node (ABCD1234)
seconde node (DFRG1234)
ABCDdbpxx (virtual db node)
ABCDcipxx (virtual instzance node)
IP adress of the system
Thank you very much!
regards
Thom

The CCMSPING is used only to configure the logon check. After this there is a data collection method CCMS_AVAIL_LOGON_CHECK responsible to update the status.
The normal configuration the method run in dialog every 5 minutes. Sometimes a solution for this kind of "value is obsolete" is changing to background.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/49/2fb95c65a116b4e10000000a42189d/content.htm
Anyway, you also should check the ccms_selfmonitoring in RZ20.

Similar Messages

Missing sapmsg.ini in Sapgui 7.2 for CCMSPING availability monitoring

Hi All,
I've been trying to locate the SAPMSG.INI file for configuring the CCMSPING availability monitoring through RZ21 on Solman, but could not find the sapmsg.ini file in the specified location of ' c:\winnt\sapmsg.ini ' which was mentioned in the SAPGUI logon pad's option window. Can you help me to locate this file?
Thanks,
Modena

Hi,
for 7.2 te config files wont available in c:
windows
it should be under C:\Documents and Settings\<username>\Application Data\SAP\Common
Please check the note also [Note 1442303 - SAP GUI 7.20 - replacement of SAPWORKDIR|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1442303]
check here
Thanks,
Jansi

Missing sapmsg.ini when configuring CCMSPING availability monitoring

Has anyone has any issues configuring Availability Monitoring with CCMSPING under RZ21 ?
Under the option, Technical Infrastrucure -> Availability Monitoring -> Configure CCMSPING Monitoring
Monitoring -> Create System
There is an option to import the SAPMSG.INI file
I have sapgui 7.1 loaded on this desktop
For some reason, the file SAPMSG.INI is not available.
I even tried defining a Group Logon on SAPLogon, SAPMSG is still not available.
Then we tried defining the system manually - all we got was a message, "system not found"
Has anyone tried doing CCMSPING Availability Monitoring on Netweaver 7.0 (Solution Manager 4.0) ?

Hi,
The SAPMSG.ini is created by your SAPGUI. check it in your Windows directory, there should be one if you are connecting to any SAP server using the message server.
Check this link for configuring availability monitoring:
http://help.sap.com/saphelp_47x200/helpdata/en/38/9e100dd7980fffe10000009b3810a5/frameset.htm
Regards,
Siddhesh

System Monitoring for Satellite System in Solution Manager

Hi,
I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
Thanku

Hi,
In Solution manager I did below steps. :
1) Activated background dispatching in Rz21 (Client : 000).
2) Created CSMREG user (In RZ21)
3) Generated the configuration file for agent (CSMCONF).
I down loaded the ccmagent_35-20001346.sar file.
What are the steps i have to do in satellite system.
Thanku

ERROR - no available datasource for source system exist

I tried to load the master for 0Bill_Type
1) Install infoobject business content and Create infoobject
2) Activate datasource in R/3
3) Replicate datasource
4) Assign infosource ---> the error said no available datasource for source system exist
When I go to source system--> Object overview --> I don't see anything at all?
Please advise what went wrong ?

Hi Pandadda,
I think you have not transferred the APPLICATION COMPONENT HIERARCHY yet. If not, then do the following:
1. In your R/3 system execute TCODE = SBIW.
2. Go to BUSINESS CONTENT DATASOURCES
3. Execute TRANSFER APPLICATION COMPONENT HIERARCHY by clicking the CLOCK.
Replicate you datasource then check it on your BW system
R,
Adwin

Disable monitoring for non-system disks.

Hi all,
Our backup server dynamically mounts disks (with drive letters) when it's backing up a Virtual Machine.
These disks are giving a lot of alerts in our monitoring that we don't need, therefore we want to disable monitoring for these disks. What is the best way to disable monitoring for these non-system disks ? As I said, these disks are dynamically mounted and
unmounted ...
Any experience with this case ?
Kind Regards,
J. Monnens

This is a bit surprising, since the logical disk discovery only runs once a day, plus it's not supposed to discover network and removable drives.
That means that your disks are mounted when the discovery runs and that they appear as "real" logical disks...
Unfortunately there is no "sync time" parameter for this discovery, which would have allowed you to specify the time of the day at which the discovery runs; thus allowing you to set a time at which you know the drives are not mounted.
Is there any other parameter that could help identifying these specific disks, besides their letter, so you could add them to a dynamic group?
Otherwise, what you could maybe try is to create your own logical disk discovery based on the native one, but with specific settings that would exclude your drives and then disable the native discovery.
But this again implies that you have something that would let you identify specifically your mounted drives... Also the native discovery is a quite complex VBS, I wouldn't actually recommend disabling/modifiying it.
Maybe I could have another idea with more details about your environment...

Progress Bar or Progress Monitor for a system command

Hello,
I am running a DOS copy command in a Java Swing application. I understand that I
can implement a Progress Bar or a Progress Monitor if I open the first file, read it,
and write to a second file. But if I have a need to use the DOS copy command,
is there a way to implement a Progress Bar or a Progress Monitor for it. If there is,
could you please point me to some example code?
Thank you,
Chris

Hello Chris,
you would have to write some native code which peeks or watches the DOS process and its progress. Surely not an easy task. But without that information, how will you set values for the ProgressMonitor?
What you could do, however, is showing an Indeterminate JProgressBar at DOS process start and make it disappear at process end.

Please read the following diagnostics of hardware monitor for my system Macbook Pro

Following report was generated through "HARDWARE MONITOR" software run on my Macbook Pro:
CPU A temperature diode 43 degree
CPU core 1 45 degree
CPU core 2 -44 degress
enclosure bottom side -33 degre
enclosure bottom side 2 -32
degre
enclosure bottom side pos 3 -33 degre
main heat sink -37
northbridge position- 40
degrees
smart disk hitachi - 32 deghgress
smart battery- 33 degrees
CPU A temperature during system check was 75 degrees.
please suggest me if it is ok for my new system and whether it would be advisible to use software like "Hardware monitor" to generate such reports intermittantly or there is any other alternative

Welcome to Apple Support Communities
Temperatures are normal, so your MacBook Pro is working correctly. Fans will turn on automatically when temperature is high, so don't worry about that. If you see that fans don't turn on, reply back because it would be a hardware problem

Automated monitoring for backend system connectivity

HI ,
I have a requirement to monitor the system connectivity from portal to back-end (ISU/CRM/UME) and send an alert e-mail to admin group. It should check the connection on a regular interval (say every 30 min) and send a report.
Can anybody suggest?
Thanks,
Manchari N

Yes, tell me your customer and i will implement it ... Jokes apart, what do you expect? That we give you a complete solution? You should use the SCN if you have a specific problem but not to get your work done by others. I don't think you will get much help with such a thread.
Best regards,
Tobias

Reg CCMS Availability Monitoring

Hi ,
I am in the process of configuring CCMs availability monitoring for my Systems.
I have the following scenario
1. System A is the CEN System and the CCMSPING Server is running in this System.
2. System A should monitor System B and send a mail if the Server B gets shut down
I have done the following until now
1. CCMS Agents are running and i am getting CCMS Alerts of System B from System A
2. In Rz21--> CCMS PING Monitoring. I have added the systems
When i select the system B in Configuration Overview and Performance Availability and select Ping Test it is failing
Please let me know the following information
1. Does CCMSPING installed in System B also?
2. Do i need to create a SM59 connection in System B(as i have in system A) with name CCMS_SYSTEM_PING_DEST. If so what are the parameters for that

Hai,
Check your inputs for the System, such as Message server port, Message server host, CS Message server host/port.
or try re installing the CCMSPING utility.
Check the below link for further details.
http://help.sap.com/saphelp_nw70/helpdata/EN/38/9e3337d7840ffee10000009b3810a5/frameset.htm
Regards,
Yoganand.V

Rule based monitors (RZ20) - Show system availability for selected systems

Hi experts,
I'm new with CCMS monitoring and need an advice for rule based monitors.
I want to create three alert monitors (RZ20). One for our developing systems, one for our quality assurance systems and one to monitor our production systems.
For the start, I want to show data in each of this monitor for free space of the filesytems (MTE class: "FilesystemFreeSpace"), for users which are locked out (MTE class "R3SyslogSecurity") and for the availabilty of the ABAP systems (MTE class "Availability_SysPercent_ABAP").
I started to create the monitor for our developing system and got a problem. I started with the rule "CCMS_DEFINE_R3_SYSTEMS" to select our developing systems "HRT", "CRT" and so on. Under this nodes, I defined the mte classes ("CCMS_GET_MTE_BY_CLASS") which needs to be shown: "FilesystemFreeSpace", "R3SyslogSecurity" and "Availability_SysPercent_ABAP".
When I checked the results, I was able to see the free space of the filesystems and whether a user has been locked out. Unfortunately, I recognized that the availability is not shown. Instead there is the message "No MTEs currently available".
I'm aware, the availability cannot be shown on this way, since the agents are part of the central monitoring system and hence i need to choose the central system for "CCMS_DEFINE_R3_SYSTEMS". However I'd like to show the availability separated for each system under "HRT", "CRT" and so on. That means for example, there should me a node "HRT", which contains the free space of the filesystems, whether users are locked out, and the availability for the system.
It's not a problem to get a solution with a static monitor. I simply create a virtual node "HRT" and tick the checkbox under "<central system>, ..., <availability>, <hrt> ..."
However, I'd like to use rule based monitor to keep the effort at a minimum by not ticking thousand of check-boxes when I expand the monitored objects.
I also tried to use the rule "CCMS_GET_AVAILABILITY_FOR_SYSTEM", but it doesn't work and SAP documentations say "This rule is reserved by SAP for later use".
Does anybody know a solution for my problem?
In addition, I've got one more question concerning rule based monitors: If I want to create a monitor for my developing systems, I'll not be able to choose "<all>" for "CCMS_DEFINE_R3_SYSTEMS". Do I need to create "CCMS_DEFINE_R3_SYSTEMS" for each system separately? Or is there another possible way?
Thanks for your help in advance.
Bob
Edited by: Bob Norwich on Oct 17, 2010 12:04 PM
I read something about logical MTE classes: http://help.sap.com/saphelp_nw04s/helpdata/en/31/5462405c910272e10000000a155106/frameset.htm --> Does I need to use this?

Sorry Sean for my very late anwser.
I was very busy in my company.
Yes, I had tried you suggestion but it didn't work for me.
The problem is, that the Agent "CCMSPING" is part of the central monitoring system by definition.
Furthermore I tried to copy the default availabiliy monitor to look how it is definied. It didn't help.
I made the decision to define my monitor differently (an extra monitor for the availability for all system) and replace this temporalily solution when ""CCMS_GET_AVAILABILITY_FOR_SYSTEM" will be available.
The situation is not so bad after all.
Thx for your help. I appreciate it!!
Bob

CCMSPING - stopped monitoring systems

Hi gurus,
I've a solution manager configured as a CEN ccms system. Also a ccmsping was configured properly and worked for a couple of years perfectly.
Yesterday I got message in RZ20 -> ... -> availability and performance :
MTE class Availability_systemObject : No MTEs currently available
So I don't have availability monitoring on my system, the nodes are gray and inactive. I've installed the latest ccmsping agent 7.00 patch 140 and it still doesn't work.
Pleaes advice,
Dimitry Haritonov

"I've installed the latest ccmsping agent 7.00 patch 140 and it still doesn't work."
Did you follow all the steps...Refer to SAP Tutor: Availability Monitoring and CCMSPING in https://www.sdn.sap.com/irj/sdn/inf?rid=/webcontent/uuid/10e3347a-0901-0010-a4ab-8e3848f90a15 [original link is broken]

Regarding authorization in solution manager for Central system monitoring

Hi,
I want to Prevent users from deleting Task logs in central system monitoring
in solution manager
I have assigned the roles SAP_SV_SOLUTION_MANAGER_DISP
But it gives display authorization for everything unable to keep track of
changes in monitoring
Can anyone please help me to prevent users from deleting task log history
Since I have to keep track of one month data
What can be the suitable role for it ? or what authorization objects i should
make a change to prevent deleting tasklog.
Kindly help me in this regard
Regards
Sanjeev.S

Thanks for your prompt reply
I am not saying about SDDCN
In transction solution_manager => opertation set up = > central system
administation
we will do manual monitoring for sattelite systems in this path. what we monitored
will be entered in task log history.
So what can be the suitable role to prevent the deleting of the task log history.
There is option delete task history. if any one by mistake clicked on that ,all the
records of monitoring will be lost.
so kindly suggest me a suitable solution

Regarding Availability Monitoring.

Hi All,
We are using SOLMAN 7 for availability monitoring of our system landscape.
We have installed CCMSPING agents in all the servers and all are running fine.
For our BI system we are not getting the availability data for the different instances. In RZ21 availability monitoring we are able to see only the Central instance of the our BI system and not any of the other app. instance.
We checked the CCMSPING agent of all application servers in BI system and they are up and running and all RFC related to CCMSPING in SOLMAN are working fine but still no data.
We also checked the /etc/host file of SOLMAN and message server for BI is mentioned there.
How can we involve the application instances in SOLMAN for BI please help on this.
Regards,
Arun Pathak

Hi,
Check this Link for the Performance monitoring-
http://help.sap.com/saphelp_nw2004s/helpdata/en/9e/6921e784677d4591053564a8b95e7d/content.htm
<i>g)system alarm trigger a page, FAX, email, etc..?</i>
>>>Is available.
http://help.sap.com/saphelp_nw2004s/helpdata/en/4e/20934259a5cb6ae10000000a155106/content.htm
Regards,
moorthy

Monitoring for Java Engine

Dear All
We have installed solman 4.0 and configured system monitoring for abap systems which is working fine, but we have to configure Central System Monitoring for SAP Entrprise Portal. if anybody knows do help me.
Thanks in advance
pnt

Hi All,
i have configured GRMG for JAVA systems for IR, ID, AE in my PI 7.1 system...........
now how to define MTE class for these components in RZ20 because it is showing no MTE methods defined..........So how to configure CCMS Alerts for the Adapter Engine............
Plz help guys...............

CCMSPING Availability monitoring for Cluster system

Similar Messages

Maybe you are looking for