Automated Word Report Printer from a Cluster filled with controls Vi

I am sharing this Vi that i made to solve a problem i had.
Basically this Vi will take what ever is inside a cluster and print it to Word. you should have a Word template with Bookmarks to work. The bookmars name should be the same as the label of the control( i am explaining the function more in depth on the block diagram comments). This way you can make fancy word templates to print in the report your own values of your test.
express vis come limited in the number of inputs you can feed to a template. so this will make you life easier on printing a report. you just need to worry now about putting the values in the cluster.
You can find it here

Hello, take a look at this article. Unfortunately the Generate Report Get Data to Modify.vi was remove since RGT 1.1.3 release. That being said, we can try to find a workaround. See "Configuring a Printer Through the Windows Dialog in LabVIEW", open the GetPrinterSettings.vi, at the PrinterSettings property node you can select the from/to page. I hope this helps.
Alejandro | Academic Program Engineer | National Instruments

Similar Messages

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

HT4356 When printing from the iPad how to control how many pages of the document to print?

When printing from the iPad, how to control how. Any pages of the document to print?

You got me curious (even though I've never used coupons.com, and I have an AirPrint printer). So I checked out coupons.com in the iTunes Store and found the following two reviews that I think explain everything:
Based on the above, my conclusion is coupons.com is set up to print on wireless HP printers from an iPad. You could print to a non-AirPrint HP printer as well using an app from the iTunes Store. But the non-AirPrint printers do offer considerably less compatibility with Apple's iPad applications than the AirPrint ones do. For example, in the Epson case, non-AirPrint Epsons can print from Safari but not from email.

Issue listeneing queue from Weblogic Cluster server with multiple managed server

Haveing issue listeneing queue from Weblogic Cluster server with multiple managed server.
Weblogic Cluster structure is like
Weblogic Cluster01
--ManagedServer01(http://server01.myhost.com:7001)
--ManagedServer02(http://server02.myhost.com:7001)
JMS Servers
JMSserver01 targeting: ManagedServer01
JMSserver02 targeting: ManagedServer02
JMSmodule
ConnectionFactory01 targeting:JMSserver01,JMSserver02
UDQueue01 targeting:JMSserver01,JMSserver02
Uniform Distributed Queue in Monitoring tab showing like this
mysystemmodule!JMSserver01@UDQueue01
mysystemmodule!JMSserver02@UDQueue01
So when I am sending message to any Host(by specifying the provider URL) its distributing equally on both server like
mysystemmodule!JMSserver01@UDQueue01 10
mysystemmodule!JMSserver02@UDQueue01 10
But when try to listen message from these queue, it is listening from one server, for which URL given to connect.
mysystemmodule!JMSserver01@UDQueue01 0
mysystemmodule!JMSserver02@UDQueue01 10
untill I connect to other server by giveing its URL, will not able to access other message left on the queue.
Solutions that tried
1) we have tried give both server URL coma sparated in provider URL
we need to configur same scenario for 5 managed server with 3 listener on other servers.
Do any one have solution for this.

You need to have:
1. Consumers connected to each UDQ member
OR
2. If no consumers in some of the members is expected, you can configure Forward Delay (specify the amount of time, in seconds, that a queue member with messages, but with no consumers, will wait before forwarding its messages to other queue members that do have consumers):
http://docs.oracle.com/cd/E12839_01/apirefs.1111/e13952/taskhelp/jms_modules/distributed_queues/ConfigureUDQGeneral.html
For example you can set it to 10 (10s)
Additional Information here:
http://docs.oracle.com/cd/E23943_01/web.1111/e13727/dds.htm#i1314228
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13951/mbeans/DistributedQueueBean.html?skipReload=true#ForwardDelay
How Does JMS Load Balancing Work with Distributed Queues and Uniform Distributed Queues? (Doc ID 827294.1)
I hope this helps
Best Regards
Luz

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/

Can you print from an I pad with a cable?

Can you print from an I pad with a gable?

First, AirPrint is not something you buy. It's built into iOS.
Second, John asked if you could print from an iPad with a cable:
Can you print from an I pad with a cable?
Third, in your reply to me, you said "you can" which would imply that one can print from an iPad via a cable, which again cannot be done.

How do I print from my mac mini with system 10.5.8

How do I print from my mac mini with system 10.5.8? do tell...

Rjanyk, welcome to the forum.
What is the make/model of the printer that you are using? I presume that it is an HP printer.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Initiating report printing from a web page to a network printer

I want to print to a user's network printer from a servlet. My development environment is a single machine so everything works just fine. The production environment is 3-tiered -- database server, web server and client. In the 3-tiered configuration the PrintReport class executes on the web server and seems to get lost. How can I print in the 3-tiered environment and still give the user the chance to change the printer or the print attributes? My java code currently displays a print dialog box to the user in the 1-tier environment.

I don't think you're going to be able to do that from a web page. Imagine if you visited my site and I decided that your printer should print every image in my "Special Donkey Pictures" directory...
You might be able to create an applet that you can feed the webpage into - into a JTextPane for instance, implement Printable and print from that. I say that without any real knowledge of Applets or what sort of security/signing issues there might be with that.

Can't print from some sites visited with Firefox, but can print from same sites visited from IE.

From IE I can print emails from my Google email but not from Firefox. For some reason Firefox keeps changing my print settings and that prevents printing unless I manually change them back. Also I have had trouble printing from dailysudoku.com. I am running Windows 7 Home Edition on an HP laptop. I tried uninstalling Firefox and then reinstalling, but that didn't solve the problem.

No. This didn't work. And when I went to about:config I received a warning message that I might void the warranty if went there. And I should go there only if I knew what I was doing. If followed the instructions very carefully and reset the print settings as you suggested. I also got the following message:
Some users may need to reset all the print.printer preferences for a particular printer, if resetting this one master preference doesn't solve the problem.
Will I need to try to reset some of the other print.printer preferences besides print.printer_print? I'm a little nervous about doing something that could void my warranty if I don't know exactly what I'm doing.

Problem printing from Adobe Reader .pdf with Brother printer from a Mac

I have a macbook pro with Intel Core i7 and OS X Yosemite and Brother MFC-7360N printer connected by wifi. My problem is that I can print everything from all programs except from the Adobe Reader .pdf that do I print from my Preview files .. The error I get is "Error filter". Does anyone know where can originate the error and how to fix it?

With another O.S. in another computer is OK.
Thank you
Juan Carlos Rubio Perez
[email protected]
Este mensaje y los ficheros adjuntos pueden contener información confidencial. Los mismos contienen información reservada que no puede ser difundida. Si usted ha recibido este correo por error, tenga la amabilidad de eliminarlo de su sistema y avisar al remitente mediante reenvío a su dirección electrónica; no deberá copiar el mensaje ni divulgar su contenido a ninguna persona.

Printing from Adobe Reader X with HP UPD PCL6 ver 61.107.4.8232 and Win 7 x64

Hello,
I have a Windows 2003 32-bit server with HP UPD PCL6 driver, version 61.107.4.8232 installed for several HP P4014dn printers. I'm running into an issue printing from Adobe X on Win 7 x64 machines. There is a delay of about 5-10 minutes, per page, before the job is spooled and printed.
Any thoughts on why this only affects Win 7 x64 machines? Printing works without any issues on Win XP and Win 7 32-bit machines.
Thanks in advance.

This is true when printing a .pdf file opened thru IE and a saved .pdf file.

Slow printing from windows 2008 R2 with Cisco 6509

Dear All,
I am having a wiered issue in my network. We have a windows 2008 R2 print server. Normal documents print's fine. If you print a image or pdf file, it takes a long time to print. For example a 2 MB PDF image with two page took me 10 minutes to print. The data from the server to the physical printer is really slow. To test it, i have loaded the driver on another windows 2008 R2 and the result is same slowness. We uses Xerox Colorqube 9303 printers.
I have tried most options from microsoft which didnt help. I have installed a windows 2012 server to test if its specific to windows 2008, but the result remains same. Printing from a windows PC is perfectly fine; 32 bit PCs we have.
I have seen someone got a solution to this by disabling ip local-proxy-arp, this is not enabled nor available in my switch.
I have 6509 as core switch with IOS 12.2(33)SXH8. Does anybody come across such a scenario? Is there any special port configuration required for windows 2008 R2 to work normal?
A sample interface configuration is given below
GigabitEthernet1/10 is up, line protocol is up (connected)
Hardware is C6k 1000Mb 802.3, address is c89c.1dd9.2619 (bia c89c.1dd9.2619)
Description: ***Connect-to-Server-form***
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is 10/100/1000BaseT
input flow-control is off, output flow-control is on
Clock mode is auto
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:13, output hang never
Last clearing of "show interface" counters never
Input queue: 0/2000/88/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 151000 bits/sec, 30 packets/sec
     10067885 packets input, 4366947776 bytes, 0 no buffer
     Received 36631 broadcasts (2569 multicasts)
     0 runts, 0 giants, 0 throttles
     11 input errors, 1 CRC, 0 frame, 77 overrun, 0 ignored
     0 watchdog, 0 multicast, 0 pause input
     0 input packets with dribble condition detected
     251401032 packets output, 96130506019 bytes, 0 underruns
     0 output errors, 0 collisions, 5 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out
Any help would be really appreciated.
Thanking you in advance.
Prince Mathew

Hello
Printing from a windows PC is perfectly fine; 32 bit PCs we have.
- Printing directly from a computer which has the locally installed driver is printing fine.- it does seem to suggest the server or the network- however locally installed print drivers work fine so the communication to the printer from the client over the network seem to be okay.
However the centrally installed print drivers means the processing job is now with the server which is between the printer and client
Whats the RTT from client and server and client to printer .etc? - perform a extended ping to validate connectivity between all 3
Have you hardcoded the server port to the nic setting of the server - Are the speed/duplex settings manually applied to the servers if so make sure they are also manually set on the switch ports realting to these servers - this is apllicable to the printers too.
Is the same driver used locally is also on the printer server correct?
Whats printing protocol ( RAW) and port being used on the printer server
Do you have print pooling setup on the server -(typo in last post)
Are these printer shared in A/D and deployed by GPO -are the correct permissions set on these shares
Check the printer permission on the spool folder also - users need at least read & execute privileges
Have you manually cleared the print spooler folder and restarted the spooler service on the server?
Are the print jobs being render to the clients or is the server taking the load of processing the print job?
Any printer queue priorites set?
res
Paul
Please don't forget to rate any posts that have been helpful.
Thanks.

Has anyone experienced Labview 8.2 crashing when attempting wire a cluster filled with object and task references?

I am getting a complete shutdown (crash) of Labview 8.2 when placing the wiring tool over a cluster that is filled with task and object references. The crash occurs on all computers I have attempted it on and happens throughout all VIs in all classes that distribute multiple references throughout the VI using a cluster. The entire project I am developing is programmed in GOOP. Has anyone experienced anything like this? I have provided a screen shot of the place where the crash is generated. Let me know if anyone has any insights.
B
Attachments:
LV screenshot.JPG ‏156 KB

There are several known crashes with LVClasses. One of the easiest
fixes is to load your application into memory and then hit
ctrl+shift+click on the Run arrow of your top-level VI. Then do
File>>Save All. You might also try selecting that wire (with the
selection tool -- use the Tools Palette to explicitly select a tool
other than wiring) and deleting it and then rewiring those terminals.

I have a h p photosmart c4580 and want to print from my apple ipad with ios 6.1 operating system.

My ipad can't locate my printer using airplay on my ipad.

Hi,
The Photosmart C4580 does not support AirPrint.
Download and use the HP ePrint mobile app to print from your iPad:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3418707&tmp...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printing from Laptop through network with router

I have a new HP Laptop, a Linksys Router and a HP Officejet 8500 909a All in One Printer. I use to be able to print from my laptop with no problem. Now I am unable to do so and have tried everything I know to correct the problem. Needless to say, I need some suggestions.

The OJ 8500 A909a only has ethernet connectivity. Just plug in the ethernet cable to the printer and the router, wait for 1 minute, and print the network cofiguration page again. You should see a valid IP address.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Automated Word Report Printer from a Cluster filled with controls Vi

Similar Messages

Maybe you are looking for