Automatic Button Push?

I have a Button in my GUI called "cmdTouch". Is it possible to make the user automatically click this button? For example, if the user types in word "hello", i want Java to automatically push down the button "cmdTouch" that is in my interface.
Thanks,

@OP: I don't mean to say that you shouldn't do this. Your requirements drive your design after all, but be careful with this kind of thing.
The key to good UI design is to stick to accepted best practices and prevent the user from having to learn a new paradigm for each application. Good examples are having the tab control focus from left to right, top to bottom, putting the menus at the top of the screen, and things of that sort.
So be careful when deviating from that. If I was filling in a form and had button clicks firing when I entered a certain phrase in a text field, it would at the very least cause confusion. (I once tried entering my phone number in a web app, and messed up the area code. When I went back to the area code field, I was automatically sent to the next field. Someone had put a check in to see if three numbers existed in the area code field, and if so sent focus to the next one. This "helpful" innovation made it impossible to correct a wrongly entered area code. Perfect example.)
Anyway, you may have a very good reason for trying this, and if so, ignore the above. But it's possible you may need to reconsider this given that one person's improvement is another person's major annoyance.
FWIW, your mileage may very, consult a physician if itching persists...

Similar Messages

  • Controlling one vi from another (auto button pusher)

    The labview forums have been such a great resource, especially for someone that is not an expert level programmer like myself, that I thought it was just about time, that I tried to give something back to the community of people that have been so helpful. I just recently solved a problem that I would think effects lots of other industries, and that possibly many people have been in a similar situation.
    We have a fully built labview program that tests a box that we have here. It is an actuator for the aerospace industry. But it could just as well be any other sort of electronic box. The labview code has been evolved for a number of years now, by many different developers, and is in a word AWFUL. It is just about the the most complicated and convoluted code I have ever seen. What makes it even worse, is that there is no documentation whatsoever. Imagine trying to fix the engine of a car, with no instructions as to how any of the parts are supposed to work, and you get the idea. 
    The time has come in our developement process, that we want to start doing some automation. The main .vi has buttons and indicators that a technician will enter information into, send it to the box, and then wait for a response (part of a testing procedure). The code is not modular at all, and it would take a VERY long time, to attempt to re-write the code as it should have been written, in a more modular fashion. So what to do?
    So I came up with a concept that I am calling "automatic button pushing". So basically what I did, was perform an Asynchronous VI call, to the VI in question, and then use various references and property nodes back to that VI, to push the buttons, and then look at the responses, as though I were a technician doing it manually. Clearly, this is not the most ideal solution. The proper way to do this, is to re-do the software so that things are more modular, and then probably use something like teststand to set up the testing for it. All of those things will happen in the future, but they needed something quick that can bridge the gap, and they did not want to touch any of the original code, as that would require re-certification etc. So what I proceded to do was to create a series of sub-vi's that touch all of the various buttons, and read the indicators that I need. Then string them together in a top level .vi to create a fully automated test. Enclosed is the subVI that I used to do the Asynchronous VI call, and an example of one of the controls that I am "pushing".
    I am thinking this sort of thing might be very useful for others. Hope this is helpful.....
    Attachments:
    Enum Control.jpg ‏74 KB
    Async Call.jpg ‏40 KB

    djs_at_eaton wrote:
    Your description:
    The labview code has been evolved for a number of years now, by many different developers, and is in a word AWFUL. It is just about the the most complicated and convoluted code I have ever seen. What makes it even worse, is that there is no documentation whatsoever. Imagine trying to fix the engine of a car, with no instructions as to how any of the parts are supposed to work, and you get the idea.
    sounds frighteningly familiar.
    Unfortunately your situation is quite common.  But I'm wondering if you couldn't simply have used normal LabVIEW techniques to call the code as a sub-VI.
    I understand your misery.  I've got code with a cluster of about 140 variables passed through a queue-driven case statement with over 100 cases.  Each case can add any other cases to the execution queue.  I'm not sure the original programmer understood it.  I'm rewriting it.
    Something like that, I would likely leave alone.  You just don't know that something idepending on something that was coded incorrectly.  You could end up chasing your tail.
    edit
    Unless, of course, that was the scope of the project. 
    /edit
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push

    Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push. First smart phone I have owned and the old flip phone was much easier to answer.....just press one button.

    Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push. First smart phone I have owned and the old flip phone was much easier to answer.....just press one button.

  • My phone wont reset with the both buttons pushed down method.. anyone knows anything else? please help!

    my iphone 4 is stuck in the spinning wheel mode, ive tried reseting it with both buttons pushed down and it wont reset! anyone knows some other way to do it? please let me know! thanks

    When you push both buttons (home and on/off), you need to hold them down together for 10-12 seconds till the Apple logo appears.

  • Sound Blaster Omni 5.1 - mute speaker and mic with single button push

    Does anyone know if its possible configure the Omni to mute both speakers and the Omni's internal mic with a single button push using the hardware volume/mute button on the Omni. I have a scenario where i need to mute both quickly when a call comes in and its a nuisance having to mute the speakers and mic separately.

    Hi Tony,
    Unfortunately there is no physical button to achieve that. Neither is there a software button to disable both speakers and mic at the same time.
    Regards,
    Colin-CL

  • Automatic Client Push not working - Site System Servers

    Having an issue getting automatic site-wise client push to work when only
    having "Configuration Manager site system servers" selected.  This was turned on after discovery was enabled and fully executed.
    SCCM 2012 R2 CU1, Single Primary Site Server, 2 Management Points (one on primary and second is standalone), with 5 DP's (currently), SQL is standalone.
    The site systems are within the IP range boundaries and show as assigned (i.e. site code showing in console of object).  The boundaries are in a boundary group with site assignment selected, and a DP added.  When I view the object properties I
    see its returning the correct IP that does fall withing the IP range boundary.
    Nothing in the ccm.log indicating its ever trying to install the client and the ccr and ccrretry folders are empty.  I can do a manual client push without issue to a site server object or a discovered desktop/laptop object.
    Is there something I may be missing here?  And does anyone know the interval in which SCCM should be creating ccr records for discovered objects that don't have a client?

    Thanks or the quick replies everyone.  To answer Idan's questions, no errors in log or component status and SQL is not clustered.
    John, I hope this isn't the case.  If it were wouldn't that effectively mean you would not be able to enabled discovery until you are ready to turn on auto client push?  And if you did that you would have no way to control the client roll out.
     Maybe I am missing something in that equation.  I'll test that theory regardless but if that ends up being the case that is alarming!  :-)
    Jason, thanks for the tip on the potential bug.  Was really more so hoping to validate automatic client push rather than actually needing it for my site system servers.  So if it is the issue you reference above hopefully its just contained to
    the site system servers.  Would be nice to be able to select automatic client push to just a collection of devices prior to turning it on for site wide deployment.  
    I guess I could always just turn off discovery temporarily and delete all but some test clients, enable client push for workstations, then once validated, turn it back off and re-enable discovery.  (wouldn't turn push back on until most clients are
    deployed on the roll out schedule)

  • Computation on a button push?

    Can you do a computation on a button press?
    I have a makeshift weekly calendar that I have 2 buttons under...previous and next. I want to push that button and to calculate the monday +7 for the next or the monday -7 for the last. I cant seem to have an action on a button push...just a process or a branch. Can anyone help?
    -Jason

    Hi Jason,
    Presumably you have a field somewhere that contains the current week's date and the calendar is based on this field?
    If so, you could do either of the following:
    1 - Add in two processes that update this value with either Monday-7 or Monday+7 depending on what button is clicked. As long as the process runs "Before Header", the calendar will see the new date and load the correct data into the calendar.
    2 - Add two hidden fields onto your page - one for Monday-7 and one for Monday+7. You can then have two branches (conditional on which button is clicked) to pass one of these values into the main date field.
    Otherwise, you can have a computation run when a REQUEST value is a certain string. There is a setting for a button called "Button Request Value". Enter the request name (without quotes) in this setting. Your computation would then be "After Submit" and Conditional Display would be "Request = Expression 1" and "Expression 1" set to the request name.
    Regards
    Andy

  • Automatic Client Push

    We recently migrated from SCCM 2007 to SCCM 2012 R2.  I did the migration by manually pushing out clients, and now that a majority are migrated, I enabled Automatic Client Push.  However, resources that were already discovered without the client
    installed aren't receiving the client.  Checking CCM.log on the primary site server, I don't see SCCM even attempting to push the client.
    Any ideas?

    Can you post a portion of the ccm.log?
    I apparently can't post much of it.  The workstations that are failing are ones I pushed to manually the day prior.  This is from the point of enabling automatic client push, and a bit afterwards:
    Waking up for site control file directory change notification  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:33.896+360><thread=17076 (0x42B4)>
    The Site Control File has changed, parameters will be reread.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:33.965+360><thread=17076 (0x42B4)>
    Updating Site Parameters  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:33.984+360><thread=17076 (0x42B4)>
    ~MP Ports: 80  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:33.998+360><thread=17076 (0x42B4)>
    ~IISPreferedPort: 80  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.012+360><thread=17076 (0x42B4)>
    ~MP SSL Ports: 443  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.025+360><thread=17076 (0x42B4)>
    ~IISSSLPreferedPort: 443  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.040+360><thread=17076 (0x42B4)>
    ~Default MP: SCCM.Domain.com  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.053+360><thread=17076 (0x42B4)>
    ~Default MP Type: 1  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.067+360><thread=17076 (0x42B4)>
    ~Default MP: [None]  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.081+360><thread=17076 (0x42B4)>
    ~Certificate Selection Criteria:   $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.094+360><thread=17076 (0x42B4)>
    ~Certificate Store:   $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.107+360><thread=17076 (0x42B4)>
    ~SSL State: 224  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.120+360><thread=17076 (0x42B4)>
    ~Select First Certificate: 1  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.134+360><thread=17076 (0x42B4)>
    ~Certificate Issuers:   $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.159+360><thread=17076 (0x42B4)>
    Checking configuration information for server: SCCM.Domain.COM.~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.174+360><thread=17076 (0x42B4)>
    ~No Fallback Status Point installed on the Site  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.187+360><thread=17076 (0x42B4)>
    ~Install on DC: True  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.200+360><thread=17076 (0x42B4)>
    ~Option for installing using IP address: 0  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.214+360><thread=17076 (0x42B4)>
    Retrieving properties from the site control file.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.226+360><thread=17076 (0x42B4)>
    ~Advanced Client Command Line: SMSSITECODE=STE  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.239+360><thread=17076 (0x42B4)>
      Ignoring unrecognized property "Advanced Client Command Line Default"  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.253+360><thread=17076 (0x42B4)>
    ~Security Mode Option - CCR buffering disabled.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.266+360><thread=17076 (0x42B4)>
    ~Default Client Type: -1  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.279+360><thread=17076 (0x42B4)>
    Sleeping for 981 seconds...  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 18:57:34.300+360><thread=17076 (0x42B4)>
    CCM Shutting down (12)~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:11:12.799+360><thread=10212 (0x27E4)>
    No request returned from queue  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:11:12.836+360><thread=10212 (0x27E4)>
    CCM Shutting down... (4)~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:11:12.850+360><thread=17076 (0x42B4)>
    CCM Main thread is exiting...~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:11:12.908+360><thread=17076 (0x42B4)>
    SMS_EXECUTIVE started SMS_CLIENT_CONFIG_MANAGER as thread ID 2664 (0xA68).  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.269+360><thread=16000 (0x3E80)>
    ************** Client Config Manager main thread starting **************  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.294+360><thread=2664 (0xA68)>
    This site: "STE".  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.308+360><thread=2664 (0xA68)>
    This site type: "1".  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.324+360><thread=2664 (0xA68)>
    This machine: "SCCM.Domain.com".  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.338+360><thread=2664 (0xA68)>
    The Site Control File has changed, parameters will be reread.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.498+360><thread=2664 (0xA68)>
    Updating Site Parameters  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.570+360><thread=2664 (0xA68)>
    ~MP Ports: 80  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.615+360><thread=2664 (0xA68)>
    ~IISPreferedPort: 80  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.630+360><thread=2664 (0xA68)>
    ~MP SSL Ports: 443  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.644+360><thread=2664 (0xA68)>
    ~IISSSLPreferedPort: 443  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.658+360><thread=2664 (0xA68)>
    ~Default MP: SCCM.Domain.com  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.680+360><thread=2664 (0xA68)>
    ~Default MP Type: 1  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.693+360><thread=2664 (0xA68)>
    ~Default MP: [None]  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.705+360><thread=2664 (0xA68)>
    ~Certificate Selection Criteria:   $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.718+360><thread=2664 (0xA68)>
    ~Certificate Store:   $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.732+360><thread=2664 (0xA68)>
    ~SSL State: 224  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.745+360><thread=2664 (0xA68)>
    ~Select First Certificate: 1  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.758+360><thread=2664 (0xA68)>
    ~Certificate Issuers:   $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.774+360><thread=2664 (0xA68)>
    Checking configuration information for server: SCCM.Domain.COM.~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.788+360><thread=2664 (0xA68)>
    ~No Fallback Status Point installed on the Site  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.801+360><thread=2664 (0xA68)>
    ~Install on DC: True  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.819+360><thread=2664 (0xA68)>
    ~Option for installing using IP address: 0  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.845+360><thread=2664 (0xA68)>
    Retrieving properties from the site control file.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.864+360><thread=2664 (0xA68)>
    ~Advanced Client Command Line: SMSSITECODE=STE  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.878+360><thread=2664 (0xA68)>
      Ignoring unrecognized property "Advanced Client Command Line Default"  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.893+360><thread=2664 (0xA68)>
    ~Security Mode Option - CCR buffering disabled.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.914+360><thread=2664 (0xA68)>
    ~Default Client Type: -1  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.927+360><thread=2664 (0xA68)>
    Confirming all required files are available on the site server~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.942+360><thread=2664 (0xA68)>
    ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.965+360><thread=2664 (0xA68)>
      Site Server Name             "\\SCCM.Domain.com"    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:56.980+360><thread=2664 (0xA68)>
      Site Code                    "STE"    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.020+360><thread=2664 (0xA68)>
      CCM Account 1                "Domain\clientdeploy"    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.054+360><thread=2664 (0xA68)>
      CCM Account 2                "Domain2\clientdeploy"    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.067+360><thread=2664 (0xA68)>
      CCM Account 3                "<end of list>"    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.081+360><thread=2664 (0xA68)>
      Max CCR Processing Threads    10     $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.095+360><thread=2664 (0xA68)>
      CCR Processing Thread Timeout 600000 ms  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.108+360><thread=2664 (0xA68)>
      Sitewide Travel Mode Switch   USE CLIENT SETTING  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.131+360><thread=2664 (0xA68)>
      Days Between Account Cleanups 30  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.143+360><thread=2664 (0xA68)>
    ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.156+360><thread=2664 (0xA68)>
    Parameters for queue: "Incoming"  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.168+360><thread=2664 (0xA68)>
      Inbox Path                   "E:\Program Files\Microsoft Configuration Manager\inboxes\ccr.box"    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.181+360><thread=2664
    (0xA68)>
      Read Queue Every             DIR CHANGE NOTIFICATION    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.193+360><thread=2664 (0xA68)>
      Retry CCR For                168 Hours    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.206+360><thread=2664 (0xA68)>
      Report Error After           ERROR REPORTING OFF    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.219+360><thread=2664 (0xA68)>
      Warn when Queue Exceeds      100  CCRs    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.246+360><thread=2664 (0xA68)>
      Delay Between CCRs           100 Millisec    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.259+360><thread=2664 (0xA68)>
    ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.271+360><thread=2664 (0xA68)>
    Parameters for queue: "Retry"  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.284+360><thread=2664 (0xA68)>
      Inbox Path                   "E:\Program Files\Microsoft Configuration Manager\inboxes\ccrretry.box"    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.297+360><thread=2664
    (0xA68)>
      Read Queue Every             60 Minutes    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.310+360><thread=2664 (0xA68)>
      Retry CCR For                168 Hours    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.323+360><thread=2664 (0xA68)>
      Report Error After           24 Hours    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.336+360><thread=2664 (0xA68)>
      Warn when Queue Exceeds      150  CCRs    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.349+360><thread=2664 (0xA68)>
      Delay Between CCRs           100 Millisec    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.361+360><thread=2664 (0xA68)>
    ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.374+360><thread=2664 (0xA68)>
    Parameters for queue: "Processing"  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.387+360><thread=2664 (0xA68)>
      Inbox Path                   "E:\Program Files\Microsoft Configuration Manager\inboxes\ccr.box\InProc"    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.389+360><thread=2664
    (0xA68)>
      Read Queue Every             DIR CHANGE NOTIFICATION    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.415+360><thread=2664 (0xA68)>
      Retry CCR For                CCR DOESN'T EXPIRE    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.428+360><thread=2664 (0xA68)>
      Report Error After           ERROR REPORTING OFF    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.440+360><thread=2664 (0xA68)>
      Warn when Queue Exceeds      150  CCRs    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.453+360><thread=2664 (0xA68)>
      Delay Between CCRs           0 Millisec    $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.466+360><thread=2664 (0xA68)>
    ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.478+360><thread=2664 (0xA68)>
    Moving CCRs from processing queue to incoming queue~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.491+360><thread=2664 (0xA68)>
    Started Incoming Queue Thread, ThreadId = 2488  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.505+360><thread=2664 (0xA68)>
    Started Retry Queue Thread, ThreadId = 1548  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.518+360><thread=2664 (0xA68)>
    Sleeping for 300 seconds...  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.531+360><thread=2664 (0xA68)>
    THREAD_ProcessQ starting, Input Queue ID is 0.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.551+360><thread=9352 (0x2488)>
      Queue Name is "Incoming".  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.632+360><thread=9352 (0x2488)>
      Queue Directory is "E:\Program Files\Microsoft Configuration Manager\inboxes\ccr.box".  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.697+360><thread=9352 (0x2488)>
    Sleeping for 300 seconds before processing requests on queue Incoming...  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.711+360><thread=9352 (0x2488)>
    THREAD_ProcessQ starting, Input Queue ID is 1.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.531+360><thread=5448 (0x1548)>
      Queue Name is "Retry".  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.773+360><thread=5448 (0x1548)>
      Queue Directory is "E:\Program Files\Microsoft Configuration Manager\inboxes\ccrretry.box".  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.785+360><thread=5448 (0x1548)>
    Sleeping for 480 seconds before processing requests on queue Retry...  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:13:57.804+360><thread=5448 (0x1548)>
    ~Waking up for site control file directory change notification  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.148+360><thread=2664 (0xA68)>
    The Site Control File has not changed since the last parameter update.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.170+360><thread=2664 (0xA68)>
    Updating Site Parameters  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.183+360><thread=2664 (0xA68)>
    ~MP Ports: 80  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.200+360><thread=2664 (0xA68)>
    ~IISPreferedPort: 80  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.247+360><thread=2664 (0xA68)>
    ~MP SSL Ports: 443  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.260+360><thread=2664 (0xA68)>
    ~IISSSLPreferedPort: 443  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.279+360><thread=2664 (0xA68)>
    ~Default MP: SCCM.Domain.com  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.298+360><thread=2664 (0xA68)>
    ~Default MP Type: 1  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.311+360><thread=2664 (0xA68)>
    ~Default MP: [None]  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.324+360><thread=2664 (0xA68)>
    ~Certificate Selection Criteria:   $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.337+360><thread=2664 (0xA68)>
    ~Certificate Store:   $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.351+360><thread=2664 (0xA68)>
    ~SSL State: 224  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.364+360><thread=2664 (0xA68)>
    ~Select First Certificate: 1  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.379+360><thread=2664 (0xA68)>
    ~Certificate Issuers:   $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.392+360><thread=2664 (0xA68)>
    Checking configuration information for server: SCCM.Domain.COM.~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.411+360><thread=2664 (0xA68)>
    ~No Fallback Status Point installed on the Site  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.494+360><thread=2664 (0xA68)>
    ~Install on DC: True  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.520+360><thread=2664 (0xA68)>
    ~Option for installing using IP address: 0  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.535+360><thread=2664 (0xA68)>
    Sleeping for 282 seconds...  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:14:15.557+360><thread=2664 (0xA68)>
    CCR count in queue "Incoming" is 0.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:18:57.577+360><thread=2664 (0xA68)>
    CCR count in queue "Processing" is 0.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:18:57.590+360><thread=2664 (0xA68)>
    Sleeping for 300 seconds...  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:18:57.603+360><thread=2664 (0xA68)>
    Getting a new request from queue "Incoming" after 100 millisecond delay.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:18:57.733+360><thread=9352 (0x2488)>
    Waiting for change in directory "E:\Program Files\Microsoft Configuration Manager\inboxes\ccr.box" for queue "Incoming", (30 minute backup timeout).  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:18:57.746+360><thread=9352
    (0x2488)>
    Getting a new request from queue "Retry" after 100 millisecond delay.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:21:57.827+360><thread=5448 (0x1548)>
    Execute query exec [sp_CP_GetPushRequestMachine] 2097152351~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:21:57.944+360><thread=5448 (0x1548)>
    Successfully retrieved information for machine workstation2 from DB  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:21:57.957+360><thread=5448 (0x1548)>
    Execute query exec [sp_CP_GetPushRequestMachineIP] 2097152351~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:21:57.969+360><thread=5448 (0x1548)>
    Execute query exec [sp_CP_GetPushRequestMachineResource] 2097152351~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:21:57.983+360><thread=5448 (0x1548)>
    Execute query exec [sp_CP_GetPushMachineName] 2097152351~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:21:57.996+360><thread=5448 (0x1548)>
    Received request: "2097152351" for machine name: "workstation2" on queue: "Retry".  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:21:58.008+360><thread=5448 (0x1548)>
    Stored request "2097152351", machine name "workstation2", in queue "Processing".  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:21:58.021+360><thread=5448 (0x1548)>
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097152351, 1~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:21:58.036+360><thread=5448 (0x1548)>
    ----- Started a new CCR processing thread. Thread ID is 0x335c. There are now 1 processing threads  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.061+360><thread=5448 (0x1548)>
    Submitted request successfully  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.074+360><thread=5448 (0x1548)>
    Getting a new request from queue "Retry" after 100 millisecond delay.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.087+360><thread=5448 (0x1548)>
    Found CCR "2097152396.ccr" in queue "Retry".  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.099+360><thread=5448 (0x1548)>
    ======>Begin Processing request: "2097152351", machine name: "workstation2"  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.074+360><thread=13148 (0x335C)>
    Execute query exec [sp_IsMPAvailable] N'STE'~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.129+360><thread=13148 (0x335C)>
    ---> Trying each entry in the SMS Client Remote Installation account list~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.142+360><thread=13148 (0x335C)>
    ---> Attempting to connect to administrative share '\\workstation2\admin$' using account 'Domain\sccmclientdeploy'~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.155+360><thread=13148 (0x335C)>
    Execute query exec [sp_CP_GetPushRequestMachine] 2097152396~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.211+360><thread=5448 (0x1548)>
    Successfully retrieved information for machine workstation1 from DB  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.230+360><thread=5448 (0x1548)>
    Execute query exec [sp_CP_GetPushRequestMachineIP] 2097152396~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.243+360><thread=5448 (0x1548)>
    Execute query exec [sp_CP_GetPushRequestMachineResource] 2097152396~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.256+360><thread=5448 (0x1548)>
    Execute query exec [sp_CP_GetPushMachineName] 2097152396~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.269+360><thread=5448 (0x1548)>
    Received request: "2097152396" for machine name: "workstation1" on queue: "Retry".  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.283+360><thread=5448 (0x1548)>
    Stored request "2097152396", machine name "workstation1", in queue "Processing".  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.296+360><thread=5448 (0x1548)>
    Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097152396, 1~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.312+360><thread=5448 (0x1548)>
    ---> Connected to administrative share on machine workstation2 using account 'Domain\sccmclientdeploy'~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.213+360><thread=13148 (0x335C)>
    ---> Attempting to make IPC connection to share <\\workstation2\IPC$> ~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.351+360><thread=13148 (0x335C)>
    ---> Searching for SMSClientInstall.* under '\\workstation2\admin$\'~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.368+360><thread=13148 (0x335C)>
    ---> Unable to connect to WMI on remote machine "workstation2", error = 0x80041002.  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.457+360><thread=13148 (0x335C)>
    ---> Deleting SMS Client Install Lock File '\\workstation2\admin$\SMSClientInstall.STE'~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.470+360><thread=13148 (0x335C)>
    Execute query exec [sp_CP_SetLastErrorCode] 2097152351, -2147217406~  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.491+360><thread=13148 (0x335C)>
    Stored request "2097152351", machine name "workstation2", in queue "Retry".  $$<SMS_CLIENT_CONFIG_MANAGER><01-08-2015 19:22:00.505+360><thread=13148 (0x335C)>

  • IPhone 4: accedental buttons pushing

    Hi,
    Since I'd updated my wife's iPhone 4 to iOS 7 she began experiencing accedental buttons pushing while placing a call. Clearly its proximity sensor doesn't turn off its screen every time she places a call, sometimes it works, sometimes not, roughply 50/50 chances of getting this issue.
    Did you face the same issue?
    Thanks for your help!

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • Automatic client push installation not working

    I created one secondary server and replication with CAS is active. Boundary also configured and enabled automatic client push installation. 
    Daily i am checking some machines, but agents are not getting installing automatically . But manual client installation is working fine without any issue. Anyone can help on this to find outwhy automatic clients push installation is not running on client
    machines

    Which site code is showing, for your secondary or for your primary?
    If secondary, then as Joyce pointed out, you need to check ccm.log on the secondary site server needs to be checked because that's where the client will be pushed from.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • My Mac Pro doesn't start on first button push.

    Starting about 2 months ago, my Mac Pro won't power on unless I press the power button once, wait about 3 seconds to hear a click (as if something inside turned off), and then press it again.
    There are no other noticable issues. I have the tower hooked up to a UPS, so I don't THINK it's the power supply (unless the clicking I'm hearing is the power supply resetting itself in some way). I've unplugged it completey, drained the battery, replaced the startup battery, reset PRAM / VRAM, all of the normal troubleshooting stuff, but it still requires this 2-button push to start up.
    Any ideas as to what's going on?
    Thanks!

    https://support.apple.com/kb/HT1149

  • DVD Player hangs when Fast Forward (F9) or Rewind (F7) buttons pushed

    When I push and hold down the fast forward and rewind keys in DVD Player, the video does indeed fast forward and reverse. But when I push and immediately release, the picture freezes, and the computer hangs. Cannot do shut down, have to do shut down by holding on/off button and then restarting.
    Very frustrating, lost a bunch of notes I was taking while watching the lecture. Any thoughts?
    Sigh,
    Dave

    Also, if you're at the computer or have a wireless keyboard, hold down the apple key (command) and and press an arrow key for FF and RW. Pressing again should step up the speed, depending on the capabilities of the 11D. Mine (104D) can FF up to . . . I think it's 32 times?
    If you have the apple remote, it's press and hold.

  • How do I shut off automatic  button navigation?

    I don't seem to have the choice in preferences it just has buttons navigate automatically right or left or up or down...I want to shut them off I have version 4.2.0 mac osx 10.5.6 version, 2x2.8 ghz quad core intel thanks

    On the menu screen, in the upper right corner, you will find a button for "Settings". Make sure "Auto Assign Buttons Continuously" is not checked.
    Then you can select each button individually and then look at the Inspector. Hit the Advanced tab and you will see you can program the Up, Down, Left, Right buttons however you want.

  • Automatic button press

    Hi everyone,
    I have a "Flat sequence structure" as shown below.
    on the second "frame" I have an "OK" button.
    this OK button is triggering an event.
    I want the button will be pressed once automaticly when the program enters to the second frame.
    Do you have a nice solution?
    I thought to change the event to "change value" and to  make a property node
    "value (signaling)" that getting value from text file. I think that my solution isn't elegant.
    maybe you have a better solutions?
    thank you very much

    You still don't make a lot of sense. It would probably help to attach the actual VI instead of a highly truncated picture.
    What is the mechanical action of the button?
    Do you really need to press the button programmaictally or would it be sufficient to simply triger the same code parts as if somebody had pressed the button?
    Why do you need the FOR loop?
    LabVIEW Champion . Do more with less code and in less time .

  • How do I change answering a call from slide to one button push

    How do I change my iPhone 5 when receiving a call from slide to one button answer?

    Utaginat wrote:
    ... so I want the push button type instead.
    Apple Feedback

Maybe you are looking for

  • REPORT_OBJECT_STATUS error

    I get the following error when I run the builtin REPORT_OBJECT_STATUS after running the builtin RUN_REPORT_OBJECT: 'FRM-40738: Argument 1 to builtin REPORT_OBJECT_STATUS cannot be null' My form is displaying fine with no errors. My code looks like th

  • Outlook 2013 - cannot use RoomLists and Suggested Times

    Hi, maybe someone has a clue on what is wrong here. In OWA, we can use the new features RoomList and Suggested Rooms when using the Calendar Assistant to plan a new meeting. The room list can be first be chosen, and the fields for the rooms are then

  • Tutorial and SDRDemo ..Build Rich Client Forms in JDeveloper .

    I am doing the self learn tutorial in Jdeveloper ADF Business Components     10.1.3.34.12 CVS Version (External)     (CVSNT) 2.5.03 (Scorpio) Build 2260 (client/server) Java™ Platform     1.5.0_05 Oracle IDE     10.1.3.34.12 Struts Modeler Version   

  • Call original VO query from entended VO

    I have create a extended VO which is having modified query. I want to call the original VO query from extended by using if else condition. if(condition=true) call the extended vo else call the original vo Please suggest how to implement this. Thanks,

  • Website holds bandwidth and doesn't release it

    Using DW3, on Apache 2.0 running on Fedora Linux 9. We have a multipage website developed in DW3. On the site we access numerous SWF pieces and several external sites (Feedzilla, a chat page, an IM extension to name some) and within 4 -5 hours our in