Sound Blaster Omni 5.1 - mute speaker and mic with single button push

Does anyone know if its possible configure the Omni to mute both speakers and the Omni's internal mic with a single button push using the hardware volume/mute button on the Omni. I have a scenario where i need to mute both quickly when a call comes in and its a nuisance having to mute the speakers and mic separately.

Hi Tony,
Unfortunately there is no physical button to achieve that. Neither is there a software button to disable both speakers and mic at the same time.
Regards,
Colin-CL

Similar Messages

Create and Edit with single button

Hi Experts
I am working in jdev 11.1.1.3.0
I have Employee table and i need to create Depart information for that employee. Here i am using single button for both create and edit.
Can you suggest me the approach.

I tried the approcah what describe in the below link
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/45-decision-based-method-outcome-169187.pdf
But in my case my task flow is
edit
Method call----> Router-------------Depart.jsff
|
|
CreateInser
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<task-flow-definition id="emp-deprtment-config">
<default-activity id="__11">navigateSrvChar</default-activity>
<input-parameter-definition id="__8">
<name id="__9">bidId</name>
<value>#{requestScope.bidId}</value>
<class>oracle.jbo.domain.Number</class>
</input-parameter-definition>
<view id="deprtment">
<page>/jsffs/emp/deprtment.jsff</page>
</view>
<method-call id="navigateSrvChar">
<method>#{DepartmentBean.editOrCreate}</method>
<outcome id="__17">
<fixed-outcome>navigateSrvChar</fixed-outcome>
</outcome>
</method-call>
<method-call id="CreateInsert">
<method>#{bindings.CreateInsert.execute}</method>
<outcome id="__28">
<fixed-outcome>CreateInsert</fixed-outcome>
</outcome>
</method-call>
<router id="router1">
<case>
<expression>#{pageFlowScope.navigation == 'edit'}</expression>
<outcome id="__18">edit</outcome>
</case>
<case>
<expression>#{pageFlowScope.navigation == 'create'}</expression>
<outcome id="__19">create</outcome>
</case>
</router>
<control-flow-rule id="__23">
<from-activity-id id="__24">navigateSrvChar</from-activity-id>
<control-flow-case id="__27">
<from-outcome id="__26">navigateSrvChar</from-outcome>
<to-activity-id id="__25">router1</to-activity-id>
</control-flow-case>
</control-flow-rule>
<control-flow-rule id="__29">
<from-activity-id id="__30">CreateInsert</from-activity-id>
<control-flow-case id="__32">
<from-outcome id="__31">CreateInsert</from-outcome>
<to-activity-id id="__33">deprtment</to-activity-id>
</control-flow-case>
</control-flow-rule>
<control-flow-rule id="__6">
<from-activity-id id="__7">router1</from-activity-id>
<control-flow-case id="__12">
<from-outcome id="__13">edit</from-outcome>
<to-activity-id id="__10">deprtment</to-activity-id>
</control-flow-case>
<control-flow-case id="__15">
<from-outcome id="__16">create</from-outcome>
<to-activity-id id="__14">CreateInsert</to-activity-id>
</control-flow-case>
</control-flow-rule>
<use-page-fragments/>
</task-flow-definition>
</adfc-config>
but i am getting error like " The ADF Controller cannot find metadata for activity '/taskflows/emp/emp-deptment-config.xml#emp-deptment-config@router1'."
any inputs could be highly appreciate
Edited by: user642703 on Oct 20, 2011 5:33 AM

Sound Blaster omni 5.1 doesn't work with Yosemite 10.10.1

Hi all! My SoundBlaster omni 5.1 doesn't work with Yosemite 10.10.1 (installed driver for Yosemite 10.10). Equipment in system is displayed properly, like "Sound Blaster Omni Surround 5.1". And SB is set as active. Volume controller is active (system shows volume adjustment). But there is no sound on output (either) and mic doesn't catch the signal.With MS Windows 8.1 it works good. Therefore I suppose problem not in hardwear, most likely in drivers.Does anybody have the same problem?

Hi Andrew,
The latest drivers release on 4 Nov, 2014 can be found here.
Please download/install it and let me know if you still have the same problem.
Cheers,
Colin-CL

Sound Blaster OMNI Surround 5.1 - input issue

Hi there all,
Purchased one of the above units today after sales person confirmed I could input three channels. I have three radios and wanted to take there mono output and put 2 into 1 for Line-In (Stereo) and 1 into Mic-in (Mono).
Have tried everything and can't have both Mic-In and Line-In active at the same time in Win7, reviewing manual and sales images its show you can attached to line-in and to Mic-in but does not say anywhere you can only use one at a time.
Can someone please confirm if its possible to use both Line-in and Mic-in at the same time or not.
Many thanks
Dave

Originally Posted by xnathanmeyerx
For some reason, in the sound blaster omni surround 5.1 mac software, the line in volume is stuck on mute. I cannot select it, which does not allow me to move the volume up or down. How do I fix this?Screen Shot 2014-10-17 at 8.07.00 AM.jpg
Hey xnathanmeyerx,
Please select Line-In of Sound Blaster Omni Surround 5.1 as the default Input for the Mac computer. It can be configured at Sound under the Mac System Preferences. I hope this helps.
All the Best!!
Yours sincerely,
JL

Sound blaster omni surround 5.1 problem with mp3 player line in

For some reason, in the sound blaster omni surround 5.1 mac software, the line in volume is stuck on mute. I cannot select it, which does not allow me to move the volume up or down. How do I fix this?Screen Shot 2014-10-17 at 8.07.00 AM.jpg

Originally Posted by xnathanmeyerx
For some reason, in the sound blaster omni surround 5.1 mac software, the line in volume is stuck on mute. I cannot select it, which does not allow me to move the volume up or down. How do I fix this?Screen Shot 2014-10-17 at 8.07.00 AM.jpg
Hey xnathanmeyerx,
Please select Line-In of Sound Blaster Omni Surround 5.1 as the default Input for the Mac computer. It can be configured at Sound under the Mac System Preferences. I hope this helps.
All the Best!!
Yours sincerely,
JL

Sound on MacBookPro stopped on internal speaker and when using earphones

Sound on MacBookPro stopped on internal speaker and when using earphones. I re-booted and tried again. No luck.

There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by the warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do notappear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store.

Sound Blaster Live! Platinum 5.1 and DTT2500 5.1

Hello!
I have a Sound Blaster Live! Platinum 5.1 and a Cambridge Soundworks DTT2500 5.1 Digital Sound System.
I linked them with with the SPDIF-Out on the Live! Drive.
First i thought it works but then i realized that there is only sound from the 2 front and the center speakers. There is no Signal on the Sorround Speakers.
When i do the sound test in the sorround mixer, only the left and the right front speakers work.
Do i have to link it with this 9 pin digital din cable? But i don't have such and don't know where to get.
Can you help me?
How do i have to link this devices?

You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

The only time the sound/speaker and mic don't work is when I answer or make a call

The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&T said it's Apple and Apple said it's AT&T. I've been around that cycle twice.
When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in.
I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible.
Hopefully the following will provide good clues: On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?

Let me try and address some of your questions. I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone. So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes. On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them. In iTunes, you can go to Store > Check for available downloads. )
Whenever you plug your phone in, it should create a backup of everything you have on the phone. This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone. You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup. If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
You should have no problems restoring from a backup if they give you a new phone. However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device. I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
I've had no problems with my new phone so far.
I'll try to keep checking this thread if you have any other questions or need more clarification.
Edit: I should say we never did figure out what exactly was wrong with my phone. The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one. But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else. Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
Also if you don't already have one, make a genius appointment ASAP. Most stores are very busy and their appointments fill up fast. I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you. The easiest way to make an appointment is to download the Apple Store app. It detects the closest Apple store from you and makes it quite easy to schedule a genius.
Message was edited by: deddinty

Sound Blaster Live! Platinum 5.1 and DTT2500

Hello!
I have a Sound Blaster Li've! Platinum 5. and a Cambridge Soundworks DTT2500 5. Digital Sound System.
I linked them with with the SPDIF-Out on the Li've! Dri've.
First i thought it works but then i realized that there is only sound from the 2 front and the center speakers. There is no Signal on the Sorround Speakers.
When i do the sound test in the sorround mixer, only the left and the right front speakers work.
Do i have to link it with this 9 pin digital din cable? But i don't have such and don't know where to get.
Can you help me?
How do i have to link this devices?

HansBaer,
Here is what you need for this setup to work (you can purchase from these pages also):
/8'' Stereo Mini Plug to Mini Din and RCA
http://us.creative.com/products/prod...0&product=0370
9-pin Mini Din to 9-Pin Mini Din (2 Meters - Choose the red cable for your setup, green is for the DTT3500)
http://us.creative.com/products/prod...8&product=0374
Jeremy

IPhone 4: Speaker and mic grills aligned?

Hello there,
Probably the stupid question of the day but since I have just bought a brand new iPhone 4 (first Apple gadget here ) I am quite worried (and very OCD about it).
The question is: Are speaker and mic grills perfectly aligned at the botton of the iPhone 4?
My iPhone 4 has both grills slightly tilted and I dont know if I have moved because of cleaning or it is a normal issue / position...
I have been checking lots of Iphone 4 at Google Images and I cannot check it properly...
Thank you so much in advance for your input and again, sorry for the stupid question.

Thank you gdgmacguy,
The problem is that it is not exactly a problem itself, but just an upseting view of the grills a little (very little) tilted.
If I bring the iPhone 4 to the Apple Store I could be hitted with the phone in my head by the man at the Genious bar ...
Thats why I would like to know how the rest of us have their speaker / mic grills
Maybe I should focus on my OCD...

Can I install Adobe DC on desktop and laptop with single subscription?

Can I install Adobe DC on desktop and laptop with single subscription?

Hi ,
Single subscription of Acrobat DC permits you for two installations .You can easily install Acrobat DC on desktop and laptop .
Make sure you don't access them simultaneously .
Regards
Sukrit Dhingra

How to use audio and mic with multipoint server with out it crashing on you

how to use audio and mic with multipoint server with out it crashing on you when i use them to make calls thru my station (zero client) at the same time it crashes on me and i need to restart the multipoint is there a setting i may have mist that enable's
them to work at the same time and if posible can i use a non USB device

Look for "Single Sign-on Using Kerberos in Java" in google or on Sun's web site. Maybe this paper will help you.
Claude

Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

As far as I know, Apple sells no such configuration. However, under Settings > General > Accessability, there is an option to play back audio in monoural mode, which would then play both halves of a stereo mix in each earbud.
Hope that helps.

Line in doesn't work Sound Blaster Audigy 2 - yes mute is off! - any ide

Hi,
I've been puling my hair out trying to hook my decks line out to line in on sound card Sound Blaster Audigy 2 (sold with PC). The sound card works fine for TV etc but I can't get any sound from line in for external devices. I've tried hooking up other devices such as iPod and Hifi and can't get any line in devices to play through my PC.
I've run the diagnostics test and tests complete succesfully.
Any ideas about how to get this sorted? Is this a known problem? Any other settings I can check on my PC?
I've searched the forums and can't see any messages related to this subject apart from one and the suggested solution was to check the mute button wasn't on, obviousy I have checked this one ;o), and the problem is elsewhere.
HELP!!! I'm dying to get a mix recorded onto MP3!!!
Thanks a lot for your help!
Regards
Rob

Rob,
Well if it isn't working on either input then it is most likely a software problem. Is this a platinum version of the Audigy 2? If so you may want to check your mixer and make sure that line2/mic2 is also unmuted to test from it. If this isn't a Platinum dri've, was this card installed in a prebuilt system? Then the front connecter may override the back one. I would launch the Window's mixer, go to options and make sure that every control has a checkmark in it. Then go down the line and make sure nothing is muted. This is mainly a double check step.
I am not sure what else could cause the line in not to work, you might want to consider contacting support directly in this case.
Jeremy

How to install sound card sound blaster live 5.1 in hardware and software

Hello People,
I would like to know how to connect my sound card or the mother and know how to connect, but it needs some special cable? drivers also want the same and know where to connect the headphone jack and microphone.
Greetings and THANKS
Creative Sound Blaster Li've 5.1
Escribe texto o la direcci?n de un sitio web o traduce un documento. Cancelar Escuchar Leer fon ticamente

Hi Angelo,
Thanks for replying. When I rebooted the system and got into
"Solaris Device Configuration Assistant" it printed out:
Windows Compatable Sound System
Sound Blaster
When I typed "prtconf", the message includes
pci, instance #0
pci8086,7190 (driver not attached)
pci8086,7191, instance #0
pci1002,88 (driver not attached)
pci8086,7110 (driver not attached)
pci-ide, instance #0
ata, instance #0
cmdk, instance #0
ata, instance #1
sd, instance #0
pci8086,7112 (driver not attached)
pci8086,7113 (driver not attached)
pci5053,3356 (driver not attached)
pci8086,c, instance #0
Is the sound card one of these?
The sound card has a Vortex II chip on it.
From the main window, I chose "Programs", "Audio",
and the error message I got is:
/dev/audioctl
Could not open stream to audio device
There is no /dev/audio file.
Thanks lot for your help.
Henry
([email protected])

Sound Blaster Omni 5.1 - mute speaker and mic with single button push

Similar Messages

Maybe you are looking for