Automatic determination of User Status in based on sales Stages

Hi All,
    Can we determine the user status of Opportunity document based on the completion of sale stages.
     can we do it in configuration itself or we need to go for development .
        Suggest some logical solution.
Regards,
Omer

Hi Omer,
As far as user statuses and customizing is concerned, you cancustomize only upto extent given in SPRO status management. If that does not fullfill you needs then status management BADI is given.
You can define the System status that should be mapped for your user status but can not define a user status for a sub-process level !!
If you know what is the system status on completion of your slae stages, then you can map your user statuses to those system statuses.
Thanks & Regards
Suchita

Similar Messages

Automatically updation of User Status

Hi All,
I am facing a problem on automatic updation of user status.As I have a process that on the basis of one field value in a quality notification I want to update the user status automatically.
I explored something with business process but not getting the right way to use it.
Please guide me if anyone deals with the same scenario or know more about using business process with user profile.
Cheers,
Tushar

Hey Prasad,
You will have to Develop a report to do this...
You should use FM CRM_ORDER_MAINTAIN to do this...
Details of how to use this FM for Updating Status could be found in CRM forum..
I would advice to consult your CRM Tech Team who are in best position to do this..
Please Reward for usefulll Post..
Regards,
Anand..

How can i set automatic change of user status(for WBS)?

Hi,
Everytime when i create invoice for customer shipment using transaction code VF01, i need to change user status of WBS element manually in project to INTG in order to recognize the revenue. Is there any possiblity to change user status of WBS automatically after invoicing?
If it is, could any one please help me to resolve this problem?

I have Compressor 4 already, defined an own parameter set there (with 1024x680 resolution) but this was not displayed as an option in FCP X. I want to produce my resolution directly from FCP X, not produce it in another resolution and then convert it via Compressor. Let alone the fact that non of the FCP-included resolutions has a width-to-height ratio of 3:2 like mine. The solution would be to know where FCP stores its presets and to be able to modify them or add new presets.

Automatic Selection of "User Status Profile" for Inspection lot

Hi all,
I have created "User Status Profile" for particular plant to block UD if Results are not recorded ; I want this 'User status profile' to be selected automatically in record usage decision screen - qa11 of inspection lot .Please let me know how to go about this?
Thanks
Veeresh

You can call the inspectiion whatever you want up to I think 6, (maybe 8) characters.
You can use 04pppp where pppp = your plant ID. So 041000, 042000, 042010, 043000, 043140, etc...
In the insepction type setup in the material masters you can set the inpsection type you want to use in that plant as the "preferred" one by checking that box in the inspection setup in the material master.
FF

Prevention of delivery when using "user status profile" for a sales order?

Hi,
I have used "user profile status" in the sales order "as a work flow" for releasing the sales order.
The user profile are as follows
a) 10: created
b) 20: Released
But I believe I am still able to create the delivery when the order status is still "10" created.
Any advise, user exit or workaround or should this happen.
Usefull answers will be rewarded.
Thanks

Dear Rajiv,
Please go through this SAP help link it will help you about Status Management in the sales order processing.
http://help.sap.com/saphelp_47x200/helpdata/en/dd/560629545a11d1a7020000e829fd11/frameset.htm
I hope htis will help you,
Regards,
Murali.

How to Create Task Automatically based on Sales Stage?

If an Opportunity's Sales Stage is changed from 'X' to "Y',then I want to create the Task for an Agent automatically by the System.How can we achive it?Could you please elaborate steps that we need to this (If customisation,how ca we do it?)
Thanks in Advance
Raju.

First U have to crate Extended View Object to your actual View obj.
Now take Page with Panel Splitter ,on First facet drag View obj as table and on second Facet Drag Extended View Obj as table.On page loading U have delete all rows from Extended View object.And then u have write bean code on button click to get current select rows from above view objct,and for Filter rows from Second View obj according to selection of rows from first view obj...

There are more than 1000 users using query based on sales group and sales ?

Hi all,
for a project activities sales group need to have authorization object? but if they make the object authorized and moved to production, all the other 1000 users gets effected to this changes since they dont have access to it.
Can anyone let me know how to handle this?
let me explain in detail,
there are different markets like india, china, hongkong , south east asia,
for a particular project, only south east asia people needs to have authorization on sales group . but there are 500 users in south east asia, so once changes is moved it will affect the existing users too?
So can anyone advise me how to handle this?
Thanks

HI Pooja,
Create roles as per authorization you have to give to users.
Create user groups - for different users depending on the countries where they belong - as you mentioned users belong to India,
China,
Hongknog,
South east asia
Eg, Create 1 role and give auth object for south east asia users. If you want to give particular authorization to 1 user only from among 500 users. create 2 roles with different authorizations and assign accordingly.
Regards,
Chitra

Revenue Recognition based on User Status of assigned Sales Order line item

Dear Community members,
We have requirement to recognize / de-recognize revenue posted to WBS for calculation of RA, based on the 'User status' of the assigned Sales Order line item.
To elaborate requirement further -
1) WBS Element - XXX - 10 ( with operative indicator - Plan/Bill/Account Assign)
2) Sales Order(SO) Line Items assigned to the above WBS -
- SO No - 123 Line Item 10 - Actual Rev - $ 300 - User Status - EXE (Meaning this work is in progress , partial payment received thus actual revenue for RA at WBS is 'Zero'
- SO No - 124 Line Item 20 - Actual Rev - $ 400 - User Status - COMPL(Meaning this work is Complete , all payment received thus actual revenue for RA at WBS is $400
- SO No - 125 Line Item 10 - Actual Rev - $ 800 - User Status - EXE (Meaning this work is in progress , partial payment received thus actual revenue for RA at WBS is 'Zero'
As per WBS reports Actual Revenue posted to WBS XXX-10 is $ 1500 ( $300$400$800) , however since two SO line items ( SO 123 /line item 10 and SO 125 / line Item 10 ) are NOT having User status 'COMPLETE', the actual revenue posted by those line items $ 1100/- ($300 + 800) should not be included as Actual Revenue for RA at WBS level.
Thus Actual Revenue for RA at WBS XXX-10 should be $ 400 /- ( the revenue posted by SO 124/line item 20 which has user status as 'COMPLETE')
How do above can be achieved?? Is there any standard solution for this?? Is any SAP Note available for this (I too am looking for one but not found any ) ?? do we need any enhancement , Customer exit etc
Thanks in advance
with regards

Hi,
Thanks. You are right that the 'Completed Contract Method' would defer revenue recognition. However, the status checked would be of the RA object (WBS Element in this case, as RA key is on WBS and RA is being calculated on the WBS).
However, our requirement is to check the user status of the Sales Order Line items assigned to the WBS element and filter the revenues posted based on the active user status of individual Sales Order Line item.
Please give you inputs.
Thanks in advance
With regards

Set a User Status for Quality Notifications only if they are "Activated".

Hello experts:
I need to be able to set a User Status for Quality Notifications only if they are "Activated".
When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification". Initially, the only difference between the inactive "Defect Notification" and the active "Quality Notification" is that the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
I checked the business rules for status DEFR and found that the following processes clear this status
PMM1 - Postpone Notification
PMM2 - Put Notification In Process
PMM3 - Assign Order
PMM6 - Put Notification In Process Again
Any Ideas ?

Perhaps some additional information would help you understand what I need to do.
For notification type F3, we are recording all defects found in production.
Most of these are expected defects that result in a minor reduction in yield.
For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
When this happens we manually activate the notification and assign tasks to find and correct the cause.
It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing. I therefore want to use the Activation event as the trigger to set my user status.

Maintain User Status for Maintenance Order

Hi,
I want to maintain User Status along with System Status. For that i have created a user profile for Maintenance and can view and modifiy define user statuses on the Maintenance Order. I have define following three statuses.
- Created
- Released
- Completed
Initially "Created" status is set on the Maintenance Order but so far i am unable to configure system to automatically change the status into "Released" when the order released and change it to "Completed" when the order is tech completed.
In short, how to link business transactions with the User defined statuses?
Regards,
Shah

Hi,
Thanks Dhavan, it was really helpful..
My requirement was to have a report on Maintenance order in terms of only three statuses "Created" , "In progress" and "Completed" to have a Pie Chart view of maintenance orders. The problem i was facing was that System Status shows multiple statuses depending upon the sequence of the business transactions conducted on the maintenance order and ultimately it ends up creating serveral statuses depending upon the sequence of actions performed on the order. That is why i opted to go for User Defined Statuses. And i linked those statuses with my Business Transactions i.e. like whenever i Release the order it automatically sets my User Status to "In Progress" and now i can have the report as per my requirement.
Regards
Shah

User status profile assigned to document type in specific sales org.

Hi,
can anyone tell me, if it is possible to assign a user status profile to the combination sales document type and sales organization?
Maybe with some kind of enhancement and/or user-exit?
Best Regards,
Florian

Hi,
You may use the following user exit to determine the relevant status profile with specific sales organization (VKORG) (There is no standard way is available to do so)
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
regards
Vivek.
Edited by: Vievk Vardhan on Jan 12, 2010 2:46 PM

How to add Product User Statuses?

hi all,
I need to add new user status values in the Sales Status list for the Products object.
The standard only has 2 statuses : blocked with error, blocked with warning. (see field Status in the Sales data tab of the Commpr01 transaction in CRM gui)
I tried to play with the status management entry of the SPRO (CRM/master data/Products/Status management) : i created a status profile, assigned it to the Master data object. But, the values do not appear in the list.
Since, our CRM is connected to an ECC system, and the products are actually replicated from ECC, I also tried to change the values in ECC thanks to the menu Logistics general/Material master/settings for key fields/data relevant for S&D/Define sale statuses : i added a few statutes, then relicated the table TVMS to CRM. I can then see that the values have been replicated to the CRM table (CRMC_TVMS). But, i still cannot the values in the drop down list box of the sales status in the Product master.
Any idea anyon?
thx
Lud

hello lud ,
The status profile can only be viewed in new UI not in SAPGUI.
Please perform the following steps
1. Go to transaction BSP_WD_CMPWB
2. open the component PRDHS
3. Go to the view PRDHS/Header
4. In the configuration add the field 'Status Profile' to the view.
Now test the again.This should solve the issue.
Also ensure that the sap note : 1249450 is implemented in the system .
Thanks & regards,
krishnen Subramanian.

Extracting User Status for Sales Orders

I am trying to extract user status transactional data for sales orders (at both the header and item level). I have been following SAP note 300300 to configure the status extractors and map the BW objects to sales order status data sources (2LIS_11_VASTH & 2LIS_11_VASTI). I think I have set up both R/3 and BW correctly according to note 300300 and the IMG documentation, but I am not getting any values in the info source for the new user status info objects, when I run the extract.
Has anyone successfully done this? If so, do you have any documentation or pointers on how I can get this to work? Or, am I better off creating a generic extractor? Thanks for your consideration.
Sincerely, Hashi Chakravarty

Hello Ravi,
well yes, I can derive the status for that order in the update rules if i show the status as an attribute of the 0pm_order; but basically there will be only the last status shown.
My problem:
a. i report on day 1, the status of the order is REL
b. on day 2 i load the master data for the orders, new status is TECO
c. on day three i want to report in the past and see the status of day 1; that's not possible in this scenario because i'll see the current status (TECO).
So that's why I want to have the statuses in the cube...
The 2lis_17_i3hdr extractor is only sensitive to CRT and TECO statuses, but not to the others (like REL / BLC and so on... :_(( )
I could read the statuses from the JEST and TJ02T tables...but still, if a document status is changed, no delta record is written in the queue...
Thanks,
Tudor

Chance user status in sales order VA02

hi all,
have any FM or BAPI is available to change (block / release) the user status in sales order change,
pls note me about this,
Regards
Usman

Hi Aditya,
thanks,,
which table and which field need to import in this FM "BAPI_SALESORDER_CHANGE" to change User status (Release / Block) in Sales order.
Regards
Usman

Perform automatic notification actions based on user statuses

Hi,
According to the doco in the IMG for defining status profiles, it should be possible to do stuff when a status changes:
When you maintain the status profile, you can, for example, specify whether quality notifications can be processed in this status or whether a deletion flag can be set. You can also specify whether a deletion flag is to be set automatically and whether the system should respond with a warning message or an error message when a deletion flag is set. (my emphasis).
This is exactly what I'm trying to accomplish: delete notification when a particular user status is set. But how? The business transaction control only specifies what can/cannot be done, nothing about what should be executed on a status being set, let alone automatically.
Or am I missing something obvious? Version 4.7 here.
Thanks,
Mike

Closed due to lack of interest...

Automatic determination of User Status in based on sales Stages

Similar Messages

Maybe you are looking for