Automatic order creation

Hi
   There are scenarios where sales orders are generated from third party software with the help of Idoc. In such case how these Availability check,Material Determination takes place.
Regards
MK

Hi,
Availability check will happen when sales order is created via Idoc. So in that case delivery date to customer can change. So for that SAP should send one Order acknowledge Idoc which will have the exact dates about the deliveries.
Some of the external system provides the real time availability check as well. In that case they do the RFC call and sends information to SAP which will do the availability check by BAPI and sends the result to the external system.
Material Determination will also happen when sales order will be created in SAP. But material determination will work when you will send the information in the correct segment and qualif.
Regards
Suneet

Similar Messages

  • Automatic po creation third party order

    Hello Gurus,
    In case of automatic po creation from third party order we have attach purchase organization and vendor to sales organization. This restrict only one vendor against sales organization.
    Is any BADI available which we can use which to change vedor dynamically ?
    Best Regards,
    Vasant

    Dear Vasant,
    For automatic PO at the time of GR following are the prerequisites:
    1) In Customizing
    a) Auto PO generation must be activated in Mov. Type 101 & 161
    b) the plant for which GR is entered must be assigned to standard Pur. Org.
    c) Default Document type for PO must be specified in GR ( MB 01)
    2) Application - Front end side
    a) material must be valuated material
    b) Purchasing Info record must exist for vendor , material & standard Pur Org.
    c) Conditions in Info Records must be valid.
    d) Applicable for stock items & not consumable items
    e) you cannot enter any movement in GR block stock
    f) Material Master & vendor master records must.
    If you ensure all above settings then it is possible to have auto PO during GR.
    Please try,
    Vivek

  • APO: RRP3 automate Production order creation from planned order ?

    Hi everyone ,
    I have got a business requirement in APO where in Open sale orders uploaded in R/3, needs to be converted to Planned order and subsequently to Production order in APO-PPDS tcode RRP3 at all stages. They want to automate this process rather than doing it
    manually.
    Can anyone tell how is this possible . Any BAPI or function module available to do this . Please help.
    Regards,
    Syed

    Hi,
    1.You need to run the heuristics Planning of standard lots SAP_PP_002  in /SAPAPO/CDPSB0 by specifying the time profile
       and  strategy profile, planning version and propagation range, product and location.
    2. Convert PPDS Planned Orders created to process orders thru /SAPAPO/RRP7 by specifying the product location start date of the order for production order creation.
    Out put of step 1- For sales order requirement, PPDS Planned orders gets created.
    Out put of step 2- PPDS Planned orders are converted to production orders.
    Thanks,
    nandha

  • Automatic/Direct Creation of Transfer OrderS

    Hello Gurus,
          these are my question:
       (1)for Automatic/Direct Creation of Transfer Orders, should it be created when saving delivery order, or do I have to create transfer order after this function ?   how to config this function?
    thanks very much!

    Hi,
    The concept of Transfer Order comes if the business have warehouse management system.
    Once the delivery is created, we need to do picking.
    This can be done in two ways
    1. Manual Picking
    This is done when there is no warehouse management. means in the delivery picking tab, you have a field as Pick Qty. The you have to give the quantity (either less than or equal to delivery qty field), then you can save the delivery. This is called manual picking
    2. Automatic Picking
    This is done when there is warehouse management is available. Then in the delivery picking tab, pick qty is grayed out. That means you cant enter the pick qty manually. For this you have to create a transfer order.
    For this you have two options
    1. With in the delivery:
    In the delivery it self before saving the delivery, you can click on "subsequent functions" drop down list on the standard menu bar, in that you have option "Create Transfer Order" click on that
    Then it will ask whether you want continue to next, say ok, then it will take you to Tranfer Order Creation Screen, Click on Generate TO item, and save it. Now the delivery is created and the Picking is done for that delivery.
    2. Using Transaction Code
    You can also do the same using transaction code. For this first you have to save the delivery.
    Goto T. Code LT03, Then it will ask for
    Warehouse Number (mandatory field)
    Plant (optional no need to mention)
    Delivery Number (mandatory field) and press enter
    Then it will take you to Transfer order creating screen, which will be nothing but above mentioned screen. Continue with same process and save it.
    Now picking is done for your delivery.
    It cant be possible to create a Transfer Order automatically once after delivery is saved.
    Hope this is clear.
    Reward if helpful.
    Thanks
    Praveen

  • Automatic Reservation at the time of process order creation

    Hi Experts,
    As you are aware, when we create a process order and save, system automatically generates the reservation and the reservation will be for movement type 261. My requirement is like this. When system creates reservation, system should consider for which order type the process order is created and create a reservation for other movement type also.
    For eg. Iam having order type ZRRW. When system creates reservation at the time of order creation, system should check the order type and reservation should be created for a movement type Z11 instead of 261 in the normal case.
    Is there any user exit for the same. Please let me know.
    Else how can I post the goods issue with a movement type other than 261. MIGO is not accepting other movement types.
    Anticipating your reply
    Regards
    Prathib

    Hi Ayethebing,
    Thanks for the reply. we created the new movement types inorder to use the SAP standard reports and get the different types of goods movements based on the different processes.
    We can do the goods issue using the custom movement type through MB1A. But I was trying to use in MIGO and this is where system wont allow this.
    In MIGO, system will do the goods issue based on reservation only. The reservation is created at the time of order creation and it uses movement type 261 irrespective of the order type.
    I was trying to find out whether any option is there to use custom movement type to create reservation so that system would propose this movement type in MIGO for goods issue against process order.
    This is an interesting case but unfortunately dont have any option of user exit or Badi. Only one user exit related to reservation is to change the str loc and back flush indicator.
    @Sabine: Thanks for your reply. But the BADI that you provided wont serve the purpose.
    Thanks
    Prathib

  • Automatic Transfer Order Creation

    Hi All,
    Scenario: When there is GR from Production order into WM Storage Location I have all settings so that Inbound Delivery HU Mvt is created also Material is getting packed into HU in Backend automatically as soon as Delivery is created.
    My Requirement is
    that I want to create Automatic transfer Order for this Inbound Delivery created. I have gone thru STD SAP Docuemnts which tells auto TO creatoin for TRs. But I need to create Auto TO for Inbound Delivery not for TR (of course in backend)
    So that in the next step the TO can Be confirmed manually.
    Can anyone plz help me << Moderator message - Everyone's problem is important >>.
    Thanks in Advance
    Edited by: Rob Burbank on Nov 10, 2010 3:57 PM

    Hi,
    To create automatic TO in the back grond w.r.t to inbound document is not possible in WM , i belive.
    if you dont want to use TR ,then do the following setting in customisation
    SPRO- LE-WM-interfaces-activate automatic to creation -movement type assign- keep TR column blank and in create TO immediatly column use x ( Call up transaction "Create TO for material document")
    Thanks & Regards
    Om

  • Automatic Sales Order Creation from PO in B1

    Hi,
    I have this scenario. Purchase order is created in SAP B1 (Business One) which triggers automatic Sales Order creation in SAP ECC 6.0.
    The requirement:
    For the combination of PO number and Sold to party there should be only one sales order created.
    The problem:
    Sometimes for the same PO duplicate Sales orders(sometimes 3,4) are getting created in ECC.
    Possible causes:
    Probably no validations in the interface.
    Question:
    1. First of all, is it an SD issue or PI (process integration) issue.
    2. If it is an SD issue, as a functional consultant what / where can we do to prevent this.
    Thanks.
    Edited by: SAP SD_Newbie on Oct 20, 2011 6:59 PM
    Edited by: SAP SD_Newbie on Oct 20, 2011 6:59 PM
    How do I move this to "ERP - Sales and Distribution (SD) General", because this question is not just related to "ERP SD Sales" but SD in general. Isn't there an option for the users to a question from one forum to another.

    1. First of all, is it an SD issue or PI (process integration) issue.
    - May be PI, or SD or both. I am not sure about the integration mechanism/program so I am not able to pinpoint.
    2. If it is an SD issue, as a functional consultant what / where can we do to prevent this.
    In t.code VOV8, go to the sales document type. Select value A in the field, check Purchase order Number. Then go to t.code OVAH, there make the message number V4 115 as error message. This will not allow the creation of the sales order, if the Purchase order number duplicates. I assume in your process, the purchase order number is populated in the PO number field of the sales order overview screen.
    Regards,

  • Automatic Purchase Order Creation

    Dear All,
    I would like to test the scenario of automatic creation of PO. I have already checked the Auto PO indicator in material master and vendor master record. Info Record and Source list also exist. In MRP view i have maintained manual reorder point planning.
    When I run the MD02, system creates the Pur. Req.  but automatic PO generation doesn't exist. Please let me know what else I need to check or there is any more setting, which I have to do.
    Thanks and Regards,
    Vineet

    Dear Vineet,
    In SAP, the automatic Purchase Order(PO) creation is possible via ME59- which via Purchase Requisitions. I would like to remind you, the automatic PO creation is possible only if Purchase requisition exists with required pre-requisites.
    Not possible to create the PO from Requirements. I mean to say not possible thru MRP. Where MRP is a requirement planning, order proposal. Order placement is an another process, which can be automated thru ME59- when PR exists.
    Hope this helps.
    Njoy SAP
    -Saravanaganesh

  • Process Order COR2, main product + co-product automatic lots creation

    Hello Gurus, I'm a programmer but before starting the enhancment of standard I want to be sure that there is no other solution (in customizing)
    I have the following situation
    Maint Product A
    Co-product B
    Current situtation
    I have a process order in COR2, when the process order is released and than saved automatic inspection lot is created only for Maint Product A
    Requiered situation
    Requiered situation is that while process order release also the inspection lot for Co-product B should be created
    Is there any chance to do it using customizng
    At the moment for both materials A and B there is the same inspection type assinged and the orgin type is '04' and also the control of inspection lot creation is set to 'Y'.
    Is there any chance to change sometihg (inspection type, orgin type, something in MM)
    NOTE: I would like to do it without doing a GR for Co-product B but exactly have a lot for Co-Product after releasing PO in COR2 like it is for Main Product now
    I will really appreciate your notes
    Thank you in advance Bogumila
    Edited by: Bogumila Wendt-Rybak on Jul 17, 2009 10:57 AM

    I dont think we can have a inspection lot created automatically for the co-products upon the Order creation .i.e release...
    U would have to make it via enhancement... also i believe u can customize a separte inspection type and then use it to create inspection lot..
    hope this helps.
    regards
    csn

  • Automatic identification of contracts in sales order creation

    Hi,
    I have configured quantity contracts as a automatic determination during Sales Order creation .When i try to create sales order using va01, after i enter Sold-to Party and Material then i hit enter ,system pops up with a dialog box with list of all the contracts existing with that Sold-to Party and Material combination.
    Can someone suggest me , is this pop -up window is a User Exit?  If so . can you pls let me know .
    I went to program SAPMV45A , which has many includes and try to check the include MV45AFZZ , but could not find out the one which i want for Pop up window.
    Thanks in advance
    Points are fully rewarded

    Hi,
      If it is a standard sap configuration..Then it may not be a user exit..
      After entering the sold -to party ...Then press /H in the command button..
      Then start debugging..You might the call.
        OR
       after the popup is displayed..Press F1 on any one of the field..In that help..press technical info button...Then check the program and  screen number..
    Go to SE51 with the program and screen number.Then press the where-used list button to get the calling place..
    Thanks
    Naren

  • Automatic creation InternalOrder inECC after Service Order creation in CRM

    Hi,
    After Service Order creation in CRM,  the automatic creation of Internal Order in ECC not happening, needs to be do the related settings. Can anybody share the stepts for the same to do the settings.
    rgds,
    balu

    Hello balu,
    Have you released all items?
    Also,please make sure that against the item category "Assign BW/CO" is set to Service.
    Hope this helps!
    Thanks and Best Regards,
    Shanthala Kudva.

  • Third Party Sales - Automatic Purchase Order Creation- via  SO event

    Dear SAP Gurus,
    We have a requirement to have automatic PO Creation for Third Party Sales Process.
    To achieve it what I have done is
    a) I have created an event linking using transaction SWETYPV:
    Object = BUS2032, Event = ALECREATED and ALECHANGED ,
    Funtion module  = PUR_ORDER_CREATE_VIA_SD_EVENT.
    Also I have modified the Sales Organization data to pass Purchasing Organization,  Purchase Order type and Purchasing group . Its working fine . Its creating purchase order automatically.
    My question here is , I'm I doing the wright method for automatic PO creation as soon as a sales order is created.
    I beleive this will call for PO creation for all Sales order not only restricted to third party sales . Will it affect performance of the system or will it ignore since there is no purchase requisition.
    Please advise on the pros and cons of this process

    We use a fairly standard Third Party process. We use the Item Category to drive the Schedule Line Category, which is flagged as Third-Party. On the Material Master (Purchasing view), the Material is flagged for Automatic PO, same on the Vendor Master. Workflow automatically kicks in on SO save to trigger the creation of the PO for the Purchase Req.
    Unfortunately, Workflow is a bit of a dark art to me, so I couldn't tell you what we have in place. My feeling is that it is bog standard though.
    Cheers, Paul.
    Edited by: Paul Read on Jun 29, 2009 9:41 AM

  • Automatic Single Item multi-level planning on sales order creation

    Hi all,
    I am using strategy 50 and want planning for single item to be carried out at the time of sales order creation to avoid MRP run everytime sales order is created..In order to achieve it i checked Automatic Planning Indicator in "OVZG" for the requirement class "045" which is requirement class for sales order of strategy 50. But still unable to achieve the desired result..
    Please guide me through.
    best regards,
    shah

    HI shah,
    in sales order go to Procurement tab there u will get the requirement type. system will determine requirement class based upon following criteria
    1) by strategy group in material master
    2) if strategy group not there then MRP group
    3) if mrp group not there then material type
    4) by this also not able to fine the requirement type then special rule is used with the help of item category and mrp type
    5) if this also fails then it will go with item category only
    6) this also fails then it will give any requirement type
    hope this is clear
    regards
    ramakant

  • MIGO 101 automatic purchase order creation

    Hi!
    We have Release 640 or at least 4.6C. We need to turn on the process, automatic purchase order creation by MIGO with movementtype 101 for two materials. So far the function in customizing is turned on (marked as on) but no reaction if I try it. The documentation is not very exactly than only to turn on which is already now! Can I fix this process just for two materials? What is wrong? Why does it not run? Do I need an additional note or any exit? Thanks for your support and help for more information for this process.
    Hi!
    So far I solved it on my own. It is an program error and solved with the note 324517.
    But another question. This is now running general but I need this process just for two materials not more! My idea would be to copy the transaction MIGO into a ZMIGO and fix this process just for the ZMIGO. So far, or is there a way to make this process only for the two materials available which I need in the original MIGO?
    Thanks a lot in advance and waiting to your reply asap.
    Best regards
    Kind regards
    Sabrina
    Message was edited by: Herbert Brunner

    Hello Herbert,
    perhaps you could use the BAdI MB_MIGO_ITEM_BADI to implement a check for the 2 given materials & issue an error message for everything else.
    Cheers,
    Attila

  • Automatic Planned order creation-Strategy 50

    Hi all,
    I am using strategy 50 and first two levels of the finished material are make to order. Whenever i create sales order a planned order is automatically created for the finished material but for the material one level below no planned order is create, although this material is also make-to-order (ind/Col indicator is empty). Please guide me how can i achieve automatic planned order creation for the materials which are one level below the finished material (Note: Assembly is also of make-to-order strategy)
    Best Regards,
    Shah

    HI ,
    You are using planning stg as 50 " Planning without final assembly ", and this stg you need assgin only TOP level code i.e salable code , and down level codes no need to maintain .
    Once you enter sales order in TOP level code system will generate planned order  and from next level onwards you need to run MRP manually / Scheduled  ( single level / multilevel).
    System will not generate MRP for two level automatically i.e TOP level and next level when you enter SO.
    I hope this will clear to you
    Thanks
    Sekhar

Maybe you are looking for