Automatic Payment program checks not asigned in order

Hi All,
I configure Bank Details mandatory for check payments in FBZP -> Payment menthod in Country -> India - check payments-->In required master record specification - > check Bank details , then all vendors maintain bank details in master (fk02).
Before this configuration in APP run Payment vouchers and check numbers assigned in Vendor Code order.
After this configuration Payment vouchers generated in Vendor code order and Check numbers generated in Vendor Bank account Number order.
My requirement is payment vouchers and check allotment in vendor code order only, Please guide me how to solve this issue.
Regards,
Moon.

Hi,
The config : Financial Accounting --> Bank Accounting --> Business Transactions -->Payment Transactions --> Payment Request --> Define Clearing Accts for Receiving Bank for Acct. Transfer
Is to decide bank sub account of the sending bank, when you are doing Bank to Bank transfer. This is manditory for cash management bank to bank transfer. Please read the config documentation again.
I just cut and paste from SAP documentaion.
"In this activity you define the offsetting accounts for the receiving bank accounts for bank account transfers (payments between house bank accounts) which should be posted to when payment is made.
The entries are necessary when payment requests are created for cash management payment advice notes that result from cash concentration, for example. The offsetting accounts for the paying house bank are determined by the payment program specifcations and the payment methods used. The offsetting accounts for the receiving house bank cannot be determined from these specifications, however, but can be defined in this section. "
Now, when you are creating payments with F111 and if you want to get sub accounts for house bank you have to do the following config.
F111 -> Maintain Configuration -> Bank determination -> Bank accounts ( for each accont id and payment method combination ).
Then you will see payments from this sub accounts and you have to setup posting rule to clear this account if you are doing EBS.

Similar Messages

Automatic Payment Program(F111) not picking Bank Sub accounts

Dear all,
The entiries genertaed from automatic payment program(F111) is not picking the bank sub accounts (Receipts/Payment GLs) which are given in the following node:-
Financial Accounting --> Bank Accounting --> Business Transactions -->Payment Transactions --> Payment Request --> Define Clearing Accts forReceiving Bank for Acct. Transfer
It is picking the Main Bank GL, which has given in bank master(FI12).
Please advise.
Thanks & regards
Ramesh Nair

Hi,
The config : Financial Accounting --> Bank Accounting --> Business Transactions -->Payment Transactions --> Payment Request --> Define Clearing Accts for Receiving Bank for Acct. Transfer
Is to decide bank sub account of the sending bank, when you are doing Bank to Bank transfer. This is manditory for cash management bank to bank transfer. Please read the config documentation again.
I just cut and paste from SAP documentaion.
"In this activity you define the offsetting accounts for the receiving bank accounts for bank account transfers (payments between house bank accounts) which should be posted to when payment is made.
The entries are necessary when payment requests are created for cash management payment advice notes that result from cash concentration, for example. The offsetting accounts for the paying house bank are determined by the payment program specifcations and the payment methods used. The offsetting accounts for the receiving house bank cannot be determined from these specifications, however, but can be defined in this section. "
Now, when you are creating payments with F111 and if you want to get sub accounts for house bank you have to do the following config.
F111 -> Maintain Configuration -> Bank determination -> Bank accounts ( for each accont id and payment method combination ).
Then you will see payments from this sub accounts and you have to setup posting rule to clear this account if you are doing EBS.

Automatic payment program spool not created

HI Exeperts
i am assing same role both users both user while doing f110 posting one use is succesed and another user was some time was sucesse ful and sometime getting error spool not created i tested in testing client same role here sucess.i checked in sm37 also but no error user go to sp02 some time he can display. whenever got the errore massage he cann't see the display option.i cann't understand this problem.
any body help me.
thank's
chandra.

Dear expert
My guess is your user SPAD - ADMIN ( Check over there )setup is incomplete, but as this is generally a BASIS responsibility
spool requested is not created.
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/payment-program-f110-is-not-creating-spool-nor-print-1848411#M1851567
Regards
Ajeesh.s

How to generate checks when executing Automatic Payment Program (F110)

Is it possible to generate checks automatically when I execute the automatic payment program? Will reward points to any suggestion. Thanks!

hi patrick
try this.....ur problem may solve.....
Create Automatic Payment Transactions (F110)
Purpose
Use this procedure to generate checks proposals or ACH proposals and then subsequently issue checks or set up ACH files to be transmitted to the bank.
Trigger
Perform this procedure when through either an ACH or a check, a creditor of the University needs to be paid.
Prerequisites
Open invoices with reached due dates have to be present in the SAP system.
Menu Path
Use the following menu path to begin this transaction:
·         Select Accounting Financial Accounting Accounts Payable Periodic processing Payments to go to the Automatic Payment Transactions: Status screen.
Transaction Code
F110
Business Process Information
The automatic payment process will be centrally managed in the Accounts Payable Office. The automatic payment program will be executed each day for all open invoices (across vendors) in the system. There will be separate payment run execution corresponding to each payment method category:
Check payments: clears the open invoices and issues a check output
ACH payments: clears the open invoices and issues an ACH file output
Foreign currency payments: clears open invoices but no output is issued
State/Grant payments: clears open invoices but no output is issued
The process steps executed during the automatic payment program are:
Enter Payment Parameters
Edit/review Payment Proposal
Post Payments
Generate Payment Medium (print checks or create ACH payment file)
Generate Positive Payment File
The payment parameters are entered in order to limit the open invoices and credits selected for payment. It is important to note that the payment terms that are defined on the invoice will drive whether a invoice is due for payment during the current payment run. During the payment program execution, the invoices that are due for payment will be presented to the user on a payment proposal list.
The payment proposal is a list of expected payments grouped by vendor account. Invoices that are due for payment but cannot be paid due to some kind of accounting or system error are listed as exceptions. Examples of typical exceptions are missing banking information (for ACH payments) and blocked invoices. Some payment exceptions will be resolved at the Accounts Payable Office. However the Department must resolve some exceptions. When these types of exceptions appear on the payment proposals, the Accounts Payable Office will inform the Department of the blocked payment in order to get a resolution. Key personnel in the Accounts Payable Office will be the only resources to have access to the editing function of the payment proposal processing. Typically, there is no business reason the edit or change a payment proposal. Editing options for a payment proposal includes: changing the default disbursing bank account information or changing the payment method.
After the payment proposals have been reviewed and edited, the proposals are posted as payments. It is important to note that any open credit on the vendor's account is also taken in consideration when creating the vendor's payment. The payment method supplement defined on the invoice will drive the check sorting.
In addition to the printed check output, the payment program run produces an ACH file and a Positive Pay file. Both files are sent to the bank for further processing. The ACH file contains the vendor's payment and banking data. The Positive Pay file contains the check data (check processed, voided, etc) and is used for confirmation of payments.
Helpful Hints
·         The R/O/C column in the field description tables below defines whether the field is required (R), optional (O), or conditional (C).
·         On certain screens you may have to scroll to view some data entry fields.
·         Click the tab to view the current overall status of the payment process by viewing the informational messages.
Procedure
1. Start the transaction using the menu path or transaction code.
    Automatic Payment Transactions: Status
2. As required, complete the following fields:
·         Run date
·         Identification
3. Click the tab.
The payment program parameters are used to limit the program's selection of open invoices and credits.
    Automatic Payment Transactions: Parameters
4. As required, complete/review the following fields:
·         Posting date
·         Docs entered up to
·         Company codes
·         Pmt meths
·         Next p/date
·         Vendor
5. Click the tab.
Free selection criteria are extended parameter selection criteria used to limit the open invoices and credits selected in the payment run.
    Automatic Payment Transactions: Free Selection
6. Perform any of the following:
If You Want To
Then
Select data by a particular field value; use the match code on the Field Name field to obtain the required field
Enter the required field value to be considered in the payment program selection of open items. The field value is entered in the Values field
Payment selection can be based on fields on the invoice or credit memo document or fields on the vendor master.
Example: A (AP payment block)
Exclude the open items that match your field value
Select to the left of Exclude values.
Include only those open items that match your field value
Deselect to the left of Exclude values.
7. Click the tab.
This information is used to expand the information that is automatically recorded in the payment run log. The payment run log is used to diagnose any program errors during the payment run.
    Automatic Payment Transactions: Additional Log
8. Perform the following:
If You Want the Payment Program Log to Record
Then
Information on due date check
Select to the left of Due date check.
Activate this option.
Any payment method selection data
Select to the left of Payment method selection in all cases.
Activate this option.
Line item information the payment documents generated upon posting the payment proposal
Select to the left of Line items of the payment documents.
Activate this option.
9. As required, complete/review the following fields:
·         Vendors (from)
·         Vendors (to)
Enter the same vendor account number range for Accounts required section of the transaction.
10. Click the tab.
The specifications defined in this section of the transaction inform the payment program the correct form to use for check printing and the correct payment file format to use for ACH payments.
    Automatic Payment Transactions: Printout and DME
11. As required, complete the following fields:
·         RFFOAVIS
·         RFFOUS_C
12. Click the tab.
    Exit editing
13. Click to save the data.
If you want to delete the payment program parameters entered, select Edit Parameters Delete.
    Automatic Payment Transactions: Status (2)
The system displays the message, "Details have been saved for the run on XX/XX/XX XXXX."
14. Click .
If you want to refresh the screen in order to view the current status (processing step) of the payment program click at any time.
    Schedule Proposal
15. Perform one of the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
16. Click to process the payment parameters and create a payment proposal.
While the payment program is selecting and processing data, the status will display the message, "Proposal is running." When the payment proposal has completed and is ready for review/edit, the system will display the message, "Payment proposal has been created."
    Automatic Payment Transactions: Status (3)
The system displays the message, "Proposal run has been scheduled."
17. Click .
    Automatic Payment Transactions: Status (4)
The system updates the status, "Payment proposal has been created."
18. Perform one of the following:
If You Want To
Then
Go To
Execute the payment run
Click .
Step 19
Edit the payment proposal
Click .
Step 43
Display the payment proposal
Click .
Step 54
Display the payment proposal run log
Click .
Step 57
Delete the proposal
Select Edit Proposal Delete.
Step 60
Display the proposal list in a printer friendly format
Select Edit Proposal Proposal List....
Step 62
Display only the exception (error) invoices or credits
Select Edit Proposal Exception List....
Step 67
Exit this transaction
Step 72
    Schedule Payment
19. Perform the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
20. Click to process the payment proposal and post the payment documents.
While the payment program is selecting and processing data, the status will display 'Payment is running'. When the payment proposal posted the status will display 'Payment run has been carried out. Posting orders X generated, X completed. (X will represent the total number of checks produced).
    Automatic Payment Transactions: Status (5)
The system displays the message, "Payment run has been scheduled."
21. Click .
    Automatic Payment Transactions: Status (6)
The system updates the status, "Payment run has been carried out." If you click after seeing the status update, "Payment run has been carried out", the system will display an update to the status, "Posting orders: XXXX generated, XXXX completed."
22. Perform one of the following:
If You Want To
Then
Go To
Review the payments posted
Click .
Step 23
Display the payment proposal
Click .
Step 26
Display the payment proposal run log
Click .
Step 29
Display the payment list in a printer friendly format
Select Edit Payments Payment List.
Step 32
Display only the exception (error) invoices or credits
Select Edit Payments Exception List.
Step 36
Print the payment run information
Click .
Step 40
Exit this transaction
Step 72
    Job Log Entries for F110-XXXX-XXXX / XXXX
23. Review the displayed information.
24. Click .
25. Return to Step 22.
    Display Payment Proposal: Payments
26. Review the displayed information.
27. Click .
28. Return to Step 22.
    Job Log Entries for F110-XXXX-XXXX-X / XXXX (2)
29. Review the displayed information.
30. Click .
31. Return to Step 22.
    List Variant
32. Click .
    Payment list
33. Review the displayed information.
34. Click .
35. Return to Step 22.
    List Variant (2)
36. Click .
    Payment list (2)
37. Review the displayed information.
38. Click .
39. Return to Step 22.
    Schedule Print
40. As required, complete/review the following fields:
·         Start date
·         Start immediately
·         Start time
·         Target computer
·         Job name
41. Click .
42. Return to Step 22.
    Accounting clerk
43. Click .
    Edit Payment Proposal: Payments
44. Review the displayed information.
45. Perform one of the following:
If You Want To
Then
Go To
Continue with the payment process
Click .
Step 18
Review/edit invoice information for the payment (invoice numbers, discounts, payment amounts, etc).
1. Click on the line you want to select.
2. Click .
Step 46
Change the key payment information (payment method, house bank, payee name and address, etc.)
1. Click on the line you want to select.
2. Click .
This option does not work for lines that have exceptions.
Step 51
    Edit Payment Proposal: Open Items
46. Double-click on the line you want to choose.
    Change Line Items
47. As required, complete/review the following fields:
·         Payment block
·         Discount amount
·         Cash discount %
48. Click .
49. Click .
50. Return to Step 45.
    Change Payment
51. As required, complete/review the following fields:
·         Payment method
·         Pmt meth.supl.
·         Due date
52. Click .
53. Return to Step 45.
    Display Payment Proposal: Payments
54. Review the displayed information.
55. Click .
56. Return to Step 18.
    Job Log Entries for F110-XXXX-XXXX-X / XXXX (3)
57. Review the displayed information.
58. Click .
59. Return to Step 18.
    Delete proposal
60. Click .
    Automatic Payment Transactions: Status (7)
The system displays the message, "Data and log deleted."
61. Go to Step 72.
    List Variant (3)
62. As required, complete the following field:
·         Variant
63. Click .
    Payment list (3)
64. Review the displayed information.
65. Click .
66. Return to Step 18.
    List Variant (4)
67. As required, complete the following field:
·         Variant
68. Click .
    Payment list (4)
69. Review the displayed information.
70. Click .
71. Return to Step 18.
72. Click until you return to the SAP Easy Access screen.
73. You have completed this transaction.
Result
You have executed a payment proposal, executed and posted a payment run and printed checks.
reward me points.......dont forget

Issue with check generation in Automatic Payment Program

Hi experts,
I need your inputs for an issue with check generation in Automatic Payment Program. Trying to make a payment to a US vendor with payment method C. The due item is getting picked up and a clearing document is getting generated. But Check is not being generated, niether can I see an entry in PAYR table. However, if I try to generate a check manually in FCH5 for the same clearing document, it is working.

Have u checked the Variant created in F110 - Printout / data medium, whether the Hose bank details are correctly set or not.
If yes, check the Printer details
Let us know the results
Thanks

Configuration of Check printing in Automatic Payment Program

Hi
I am able to run the automatic payment program. But I am not sure how to configure check lots and check printing. Could any one please help me with step by step instruction regarding the configuration required after running the program.
Thanks
Hariharan G

Hi
For the program RFFOUS_C give Variant(X).
select maintain Variants button and select continue button.
give program run date , Identification feature , paying company code , sending company code , payment method , House Bank , Account ID , Check Lot NO..
Under Print Control
select Print checks checkbox , give printer name and select print immediately checkbox.
select Print Payment Advice Notes checkbox , give printer name and select print immediately checkbox.
select Print Payment Summary checkbox , give printer name and select print immediately checkbox.
No. of sample printouts (0) and select do not Void any checks checkbox.
select Attributes button and give description and save.select back arrow.
select Printout button and select Start Immediately checkbox.
In the job name for the ? give variant name(X) and enter.
To see the printed checks from the menu select System -
>Services -
>Jobs -
>Job Overview(SM37) and execute.
Also go to SP01 and execute.
we will get the list of spool requests.
Regards
Venkat
Edited by: Venkat Dara on Feb 4, 2009 12:55 PM

How to create check in batch automatically after automatic payment program

Hello
SAP Experts i am getting a issue
how to create check in batch automatically after automatic payment program ( t code is f110)
Thanks & Regards
Narendra.G

Hi Narendra,
Please note the process below for cheque Printing:-
1. The pre requisite for Cheque printing is you have used program RFFOUS_c/or the Z version of this program in FBZP and that you have maintained the form name in the field Form name for Payment medium in FBZP.
2. You have a pre printed stationary on which you want to print and the Program & the form has been modified to print as per this.
3. In F110, you must have assigned the Variant name, which would specify the cheque lot no. and this should exactly match with the current cheque no. in the pre printed stationary.
4. Now, after all this setting, when you run Payment run in F110, then also only the Payment documents are posted but the cheque no.s are not updated in the Payment document no. nor the PAYR table is updated. It is only when you run the Print out tab, that a spool is created in SP01 for cheque printing as per the Payment documents.
5. Then in SP01, you can print the spool on your pre printed stationary.
This is the complete process of printing cheques from F110. Hope this helps..
Regards,
SAPFICO

Payment not clearing for Vendor through Automatic Payment Program

Hi
I had setup automatic payment program for my vendor to take $ from my GL account. When I run the payment program, it ran without any error, however, the vendor account was not cleared. The balance in GL and Vendor account remains the original amounts.
The log shows the following.
Job started
Step 001 started ( program SAPF110S, variant &0000000001081, user ID XXXXXXX)
Log for payment run for payment on 01/12/2008, identification XXXX
End of log
Job finished
Can anyone help ?
Thanks
Shalini

I have not proposed a solution. Now go to F110 and go to the table additional tab and press proposal log button on the lower right hand side. this will give a detailed log. Either analyse this error set right error or send the error log for analysis.
First run the proposal run and if it is successful, run the payment run and then to print run.
It should be run in the above sequence.
Edited by: Sivakumar Gopalakrishnan on Jan 12, 2008 7:54 PM

Automatic Payment program -line item cleared not displaying in table

automatic Payment program -line item cleared not displaying in table
i have re run the APP program DUSR1 same earlier it has run twice but table dose not show double payment to vendors how to resolve the issue.
Can some one please guide me on this.

Hi Priyanka,
First, which table are you referring to. If your fist APP run clears the line item, it will no longer be available in the open item.
Please be more specific on the problem so that we can try to help you. If possible, please provide screenshots.
Regards,
Ganesh

Automatic Payment Program-problems with check printing/viewing

Hello:
I am new to the SAP field. I have been trying to make the automatic payment program work for me. I have been having trouble trying to view the print preview of checks by going to system->own spool requests.
Steps followed ---Automatic Payment Program:
I checked the open invoices -
FBL1N
I ran F110 and finally print out with the start immediately option checked
I checked the open invoices FBL1N again and all the open invoices have cleared
However I am unable to view the checks that should have printed for this payment run. Can anyone please tell me what I am doing wrong here.
Thanks,
Mahesh

Mahesh,
Go to F110, Enter the run date and then click enter - After that click on edit and then proposal and proposal list and you can see all the details - which actually runs the program RFZALI20.
Hope that helps..
Thanks,
Nandita

Reprinting check of automatic payment program

Hi Gurus,
I want to reprint the cheques generated from automatic payment program in one go.From FBZ5 I can print only sigle sigle chques.But I wanna to reprint all the cheques in one go.
Kindly reply.
Regards,
Abhinandan.

This depends on which Prog you are using for the Check Printing.
In case it is RFFOUS_C then run this in SE38. Here you can give the F110 Payment Run identification and other necessary parameters; in the Last Section (re-print checks) of the dialog box you can key-in necessary parameters for reprinting.

Automatic payment program how to explain in interviewes

hi friends
asking automatic payment program explanation in interviewes. how to explain the automatic payment program pls tell me my mail id [email protected]

The payment program can be broken down into the following steps:
1. Define parameters (Parameters TAB on the F110 screen)- Based on the parameters defined the program picks up the vendor 'open' items to be paid and displays them in the payment proposal. The parameters tell the program the following:
    a. Which company codes you want to include in this payment run (If the AP cleark who is running the program is responsible for only North American companies, he/she will include only those company codes in the payment run)
    b. Which Vendor you want to pay (suppose there are lot of AP clerks in an organization, they can use this to restrict the selection to the vendor for whom they are responsible for payment)
    c. What are the payment methods you want to use to pay these vendors
    d. What is the next date when you will run payment run. Based on this date the program picks up all the items which become due till the next date of payment run, even though those open items are not due today.
2. Free selection TAB - In this TAB you can restrict the 'open' items you want to select. You can use any field in the BSEG table and restrict the selection. For e.g. You can select the field ' Document no.' from BSEG and give a range of documents you want to pay. The program will pick up only those documents for payment.
3. Additional Log TAB - In this TAB you can select the logs you want the system to create if there are any errors or for all items even if there are no errors. If the results of the program is not what you expected, then you can read the log to understand the reason why the program did not select what you wanted.
4. Print/data medium TAB - Here you supply the program variant for all the payment methods you are using. For e.g. in US if you use the 'Check' payment method, then in this TAB you supply the variant for the RFFOUS_C program. If you are using EDI payment method then a variant for the program RFFOEDI1 has to be supplied in this TAB.
5. Status TAB - Once you enter all the information in the above 4 TAB's you will come to the status TAB.
Initial status will be 'No Parameters have been entered'
Before you run the program, the status would be 'Parameters have been defined'.
After you run the proposal the status will change to 'Payment proposal has been created'.
After you run the Payment run the status will change to 'Payment run has been carried out. Posting orders: 10 generated, 10 completed'.
Thus the status tells you in what stage of the Payment program you are in.
Please note that the buttons you see here is dynamic. Based on the status the button will appear or disappear. But all the functionalities which these buttons offer can also be selected using the dropdown list appearing at the top of the screen.
6. After you completed the payment run, you have to print the payment media - If the payment method used is check, you print checks. If it is wire then you create the wire file etc. This is the last step in the payment run.
Important Note: After running the proposal, you should not leave the payment program. Either you should complete the payment run completely , all the way till you print the payment media, or delete the payment proposal.
If you do not delete the proposal, then the vendors in this proposal will not be included in any of the subsequent payment runs.
Hope this helps you in answering your Interview questions.
Good luck.
Kalyan

Automatic payment program - urgent

Dear all,
i configured automatic payment program. when i run the automatic payment program using f110, accounting documents to Vendor account and house bank account are not generated. In the status bar, only the following messages appear:
"Parameters have been entered"
"Payment proposal has been created"
"Payment run has been carried out"
The following message is not appearing:
"Posting orders: X generated, X completed."
Can anyone guide me to solve this issue?
Will award maximum points.
Thanks in advance,
Regards,
ar

Hi,
You get the message Posting orders X(Ususally no. of documents) generated and X completed, it means that your proposal was successful. You will not get the document number in the status. Click on the Payment proposal log to view the document number generated.
Regards
Sridhar

Error in( F110) Automatic payment Program

Hi,
while posting the payment through (F110) Automatic payment program , i have got the Error that
" Error in creating the payment document; read job log"
please help me out
Thank you

Hi,
could you please check carefully the exception list and the payment/proposal log in F110, in which you can find the reason why it included in the "exception list".
Did you activate the Additional Log? what does the log say?
You should analyze the proposal log in detail in this case. Also could you please ensure that this vendor is not blocked for payment and you have not entered the Payment block in the affected documents.
regards Bernhard

Automatic Payment Program Proposal split same vendor invoices

Hello,
We are facing some peculiar issue in Automatic Payment Program,when we run the automatic payment program payment proposal split the same vendor invoices into so many differnt proposals instead of consolidated proposal.
Every time it's not happen to same vendor it's dynamically changing to different vendors.
Eg:We have 10 vendor invoices and when we run the payment run 2 invoices is coming together and 3 invoices coming together not 10 same.
I have checked the vendor master data and payment program configuration for payment method for company code there is no tick selected for individual payment.
Could you some body explain me why system is behaving this way.
Thanks in advance.
Regards,
Satya

Hello Staya
Just check the line items of your vendor. Some line items may have the payment methods and some line items may not have the payment method. When you do the run in f110 it culbs all the invoices which have the same payment methods together and make the payments. Pls check this and see.
It could be the reason if you have not ticked the individual payments in vendor master.
Niranjala

Automatic Payment program checks not asigned in order

Similar Messages

Maybe you are looking for