Automatic payment program spool not created

HI Exeperts
i am assing same role both users both user while doing f110 posting one use is succesed and another user was some time was sucesse ful and sometime getting error spool not created i tested in testing client same role here sucess.i checked in sm37 also but no error user go to sp02 some time he can display. whenever got the errore massage he cann't see the display option.i cann't understand this problem.
any body help me.
thank's
chandra.

Dear expert
My guess is your user SPAD - ADMIN ( Check over there )setup is incomplete, but as this is generally a BASIS responsibility
spool requested is not created.
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/payment-program-f110-is-not-creating-spool-nor-print-1848411#M1851567
Regards
Ajeesh.s

Similar Messages

Automatic Payment Program(F111) not picking Bank Sub accounts

Dear all,
The entiries genertaed from automatic payment program(F111) is not picking the bank sub accounts (Receipts/Payment GLs) which are given in the following node:-
Financial Accounting --> Bank Accounting --> Business Transactions -->Payment Transactions --> Payment Request --> Define Clearing Accts forReceiving Bank for Acct. Transfer
It is picking the Main Bank GL, which has given in bank master(FI12).
Please advise.
Thanks & regards
Ramesh Nair

Hi,
The config : Financial Accounting --> Bank Accounting --> Business Transactions -->Payment Transactions --> Payment Request --> Define Clearing Accts for Receiving Bank for Acct. Transfer
Is to decide bank sub account of the sending bank, when you are doing Bank to Bank transfer. This is manditory for cash management bank to bank transfer. Please read the config documentation again.
I just cut and paste from SAP documentaion.
"In this activity you define the offsetting accounts for the receiving bank accounts for bank account transfers (payments between house bank accounts) which should be posted to when payment is made.
The entries are necessary when payment requests are created for cash management payment advice notes that result from cash concentration, for example. The offsetting accounts for the paying house bank are determined by the payment program specifcations and the payment methods used. The offsetting accounts for the receiving house bank cannot be determined from these specifications, however, but can be defined in this section. "
Now, when you are creating payments with F111 and if you want to get sub accounts for house bank you have to do the following config.
F111 -> Maintain Configuration -> Bank determination -> Bank accounts ( for each accont id and payment method combination ).
Then you will see payments from this sub accounts and you have to setup posting rule to clear this account if you are doing EBS.

Automatic Payment Program clearing docs created but no checks created

Hi All,
During APP open items are cleared but the checks are not been created, i found that if you do not enter the program variant(under printout/data medium) for the vendor housebank checks are not created.
Is there any way to always include the variant, at all times withot manually entering it.
Also can i make this field mandatory
Thanks
Shine

Hello,
The issue is in the variant, the values are not static, the entries like Payment Run Date and Identification Key needs to be changed every time that you run F110. Meaning that these values are to be replaced with your Payment Run Date and Identification Key and other details like House Bank, Account ID, if it is check payment, your check lot number, vendor account range etc. There is nothing these values comes automatically.
Regards,
Ravi

Automatic Payment program checks not asigned in order

Hi All,
I configure Bank Details mandatory for check payments in FBZP -> Payment menthod in Country -> India - check payments-->In required master record specification - > check Bank details , then all vendors maintain bank details in master (fk02).
Before this configuration in APP run Payment vouchers and check numbers assigned in Vendor Code order.
After this configuration Payment vouchers generated in Vendor code order and Check numbers generated in Vendor Bank account Number order.
My requirement is payment vouchers and check allotment in vendor code order only, Please guide me how to solve this issue.
Regards,
Moon.

Hi,
The config : Financial Accounting --> Bank Accounting --> Business Transactions -->Payment Transactions --> Payment Request --> Define Clearing Accts for Receiving Bank for Acct. Transfer
Is to decide bank sub account of the sending bank, when you are doing Bank to Bank transfer. This is manditory for cash management bank to bank transfer. Please read the config documentation again.
I just cut and paste from SAP documentaion.
"In this activity you define the offsetting accounts for the receiving bank accounts for bank account transfers (payments between house bank accounts) which should be posted to when payment is made.
The entries are necessary when payment requests are created for cash management payment advice notes that result from cash concentration, for example. The offsetting accounts for the paying house bank are determined by the payment program specifcations and the payment methods used. The offsetting accounts for the receiving house bank cannot be determined from these specifications, however, but can be defined in this section. "
Now, when you are creating payments with F111 and if you want to get sub accounts for house bank you have to do the following config.
F111 -> Maintain Configuration -> Bank determination -> Bank accounts ( for each accont id and payment method combination ).
Then you will see payments from this sub accounts and you have to setup posting rule to clear this account if you are doing EBS.

Automatic payment - checks were not created

Hi Gurus
APP went well. After that I went to sp01 and after printing the checks I noticed that for the two vendors, the checks were not created. What could have been the problem
When I go to the vendors accounts the items are appearing as cleared items
Please advice. What could have gone wrong? And how can we now print the checks for them since the invoices are overdue
thanks
Mythu

Hi,
First check in your APP proposal, whether any line items were selected for the payment run or not.
And check whether any payment documents posted to those vendors or not.
If posted, then go to FB03 for those accounting documents and go to menu item -Environment---check information.
If you found the check number over there.
Then go to FBZ5 and give the payment document no, CC, FY and go to menu item -=print--print old check
Please make sure that, your check priniting printer should have the specific check (check no, which u found for errorised vendor's payment document) in line.
Thanks,
Srinu.

How to create check in batch automatically after automatic payment program

Hello
SAP Experts i am getting a issue
how to create check in batch automatically after automatic payment program ( t code is f110)
Thanks & Regards
Narendra.G

Hi Narendra,
Please note the process below for cheque Printing:-
1. The pre requisite for Cheque printing is you have used program RFFOUS_c/or the Z version of this program in FBZP and that you have maintained the form name in the field Form name for Payment medium in FBZP.
2. You have a pre printed stationary on which you want to print and the Program & the form has been modified to print as per this.
3. In F110, you must have assigned the Variant name, which would specify the cheque lot no. and this should exactly match with the current cheque no. in the pre printed stationary.
4. Now, after all this setting, when you run Payment run in F110, then also only the Payment documents are posted but the cheque no.s are not updated in the Payment document no. nor the PAYR table is updated. It is only when you run the Print out tab, that a spool is created in SP01 for cheque printing as per the Payment documents.
5. Then in SP01, you can print the spool on your pre printed stationary.
This is the complete process of printing cheques from F110. Hope this helps..
Regards,
SAPFICO

Payment not clearing for Vendor through Automatic Payment Program

Hi
I had setup automatic payment program for my vendor to take $ from my GL account. When I run the payment program, it ran without any error, however, the vendor account was not cleared. The balance in GL and Vendor account remains the original amounts.
The log shows the following.
Job started
Step 001 started ( program SAPF110S, variant &0000000001081, user ID XXXXXXX)
Log for payment run for payment on 01/12/2008, identification XXXX
End of log
Job finished
Can anyone help ?
Thanks
Shalini

I have not proposed a solution. Now go to F110 and go to the table additional tab and press proposal log button on the lower right hand side. this will give a detailed log. Either analyse this error set right error or send the error log for analysis.
First run the proposal run and if it is successful, run the payment run and then to print run.
It should be run in the above sequence.
Edited by: Sivakumar Gopalakrishnan on Jan 12, 2008 7:54 PM

Automatic Payment program -line item cleared not displaying in table

automatic Payment program -line item cleared not displaying in table
i have re run the APP program DUSR1 same earlier it has run twice but table dose not show double payment to vendors how to resolve the issue.
Can some one please guide me on this.

Hi Priyanka,
First, which table are you referring to. If your fist APP run clears the line item, it will no longer be available in the open item.
Please be more specific on the problem so that we can try to help you. If possible, please provide screenshots.
Regards,
Ganesh

Automatic payment program setting

Hi sir,
Could you resolve my below query :
What is the cycle for Automatic payment program setting ?

Hi,
Running AUTOMATIC PAYMENT PROGRAMME:
T Code F110 process,
Enter the following things,
Rundate : Can be today's date
Indentification : Anything (eg. app, app1, aap2)
and press enter, and go to parameters tab,
Posting Date : Can be today's date (Payment entry posting date)
Docs entered up to : Can be today's date (here specify the date till that date dues will be considered)
Company code - Your company Code
Payment method - Your PM
Next P/Date - Enter next payment run date (dues will be selected one day before that date)
Customer / Vendor : enter the customer / vendor or its ranges
GO to free selection tab,
Field Name : Select any option if you wanted to restricted to it (It looks like non-seletable means grayed out but you can select it) you can select Business area to make payment only to that BA or click on Exclude values to exclude that BA alone
Values - give the values of your selection. If it is multiple selection, use "," (commas) to understand it.
Go to additional Log tab,
X - Due date Check
X - Payment Method selection in all cases
_ - Payment method selection if not sucessful
X - Line item of the payment documents
and again give the vendor or customer or its ranges here also.
Goto Printout / data medium,
Against your program - Give some varient name (eg. APP) and click on maintain Varient tab on the top it will take you to the next screen,
There you can select Individual selection and your Co Cd
and it will take u to one more screen, there give
Program run date : Rundate entered at very first
Identification feature : give your identification
Paying company code : Your company code
Payment method : Your payment method
House bank : Your HB
Account ID : Your HB ID for payment
Check lot number : Give check lot number Maintained in FCHI
Print check - Printer name
and select and give the information where ever you feel it is required. And go back it will ask u to save the varient, do the it.
Now click on Status, now again it will ask you to save, do it. Now click no proposal tab, it will pop-up one window, there
X - Start Immediately; X-Create payment medium and tick
Keep refresh it till you get the message "Payment proposal has been created" in the status.
Now you can check the proposal log,
If the proposal Log is OK then, click on Pmnt Run tab,
it will pop-up one window, there
X - Start Immediately; X-Create payment medium and tick
Keep refresh it till you get the message "Payment run has been carried out" in the status.
Now you can check the payment log also, to check the same
Now you can click on Printout tab,
X - Start Immediately; Job name - Delete ? and give some reference like APP1 etc., and tick
Now goto your own job to see the whether it is completed or not and from there you can goto your spool request to print the check.
Bank configuration:
To set up Electronic Bank Statements (EBS)
1. Create House Bank and Account ID (FI12)
2. Setup EDI Partner Profile for FINSTA Message Type (WE20)
3. Configure Global Settings for EBS (IMG)
- Create Account Symbols
- Assign Accounts to Account Symbols
- Create Keys for Posting Rules
- Define Posting Rules
- Create Transaction Types
- Assign External Transaction Types to Posting Rules
- Assign Bank Accounts to Transaction Types
4. Define Search String for EBS(Optional)
- Search String Definition
- Search String Use
5. Define Program and Variant Selection
Additional information is also available in the SAP Library under:
Financial Accounting > Bank Accounting (FI-BL) > Electronic Bank Statement >
Electronic Account Statement Customizing.
Bank Reconcilliation Statement
The following are the steps for BRS:
Create Bank Master Data - This can be created through T.Code FI01 or you can also create the house bank through IMG/FA/Bank accounting/Bank account
2. Define House Bank
3. Set up Bank selection payment programe- IMG/FA/ARAP/BT/AUTOIP/PM/Bank selection for payment prg.
a. setup all co codes for payment transaction - Customer and vendors
b.setup paying co codes for payment transactions
c.setup payment method per country
d.setup payment method per co code for payment transaction
e.setup bank determination for payment transaction
Please go for Cheque mangement using T code FCHI (IMG/FA/ARAP/BT/OP/AutoOp/PaymentMedia/CheckManagement) and for void reasons FCHV. You can create Bank Reconcilliation statement by TC FF67 (SAP/AC/Treasury/CashManagement/Incomings/ManualBankStatement) . Don't forget to keep the opening Balance as zero. Use FBEA for post process.
All the steps together will lead to (FF67) Bank reconciliation statement.
Thanks,
Prithwiraj.

Scheduling the Automatic Payment program

Can we schedule the automatic payment program? If so, how?
The requirement here is that without/limited manual intervention the program should be able to run.

Hi,
For sure business cant avoid running proposal because they have to make sure that vendors who needs to be paid were not gone into exceptions for various reasons. You can definatley automate the process once proposal is succesfully executed. I am hoping this request is coming from business because they dont want to stay till 8pm for check run. if the checks are printed onsite there is no point in automating it, if the check printing is done off site by some vendor this is how you can automate the process.
you create variants for check printing program RFFOUS_C. For the program run date you have to create variant varibale so that it will be updated on daily basis. Proposal Id has to be unique for each company code. Ask business to run proposal with the same Id which you specify in the variant. I am not going in detail about further selections.
Create a batch job and schedule to run on the day and time you wanted. once the job is succesfully executed a spool will be generated and the checks can be printed.
I hope it helps,
Thanks,

Automatic payment program - urgent

Dear all,
i configured automatic payment program. when i run the automatic payment program using f110, accounting documents to Vendor account and house bank account are not generated. In the status bar, only the following messages appear:
"Parameters have been entered"
"Payment proposal has been created"
"Payment run has been carried out"
The following message is not appearing:
"Posting orders: X generated, X completed."
Can anyone guide me to solve this issue?
Will award maximum points.
Thanks in advance,
Regards,
ar

Hi,
You get the message Posting orders X(Ususally no. of documents) generated and X completed, it means that your proposal was successful. You will not get the document number in the status. Click on the Payment proposal log to view the document number generated.
Regards
Sridhar

Error in( F110) Automatic payment Program

Hi,
while posting the payment through (F110) Automatic payment program , i have got the Error that
" Error in creating the payment document; read job log"
please help me out
Thank you

Hi,
could you please check carefully the exception list and the payment/proposal log in F110, in which you can find the reason why it included in the "exception list".
Did you activate the Additional Log? what does the log say?
You should analyze the proposal log in detail in this case. Also could you please ensure that this vendor is not blocked for payment and you have not entered the Payment block in the affected documents.
regards Bernhard

Payment Proposal Error in Automatic Payment Program

While I am running the Automatic Payment Program Run after passing on the Parameters, I have created the Payment Proposal.
When I am trying the edit the payment prosal to block payment of some of the invoice line items, system is throwling a red signal error (Payment/Exception). I am not able to edit the payment proposal and proceed further.
Kindly help me out as the proje4ct has gone live and it is a critial requirement.
Thank you
Ravi
Mobile 9849393564

check with fowlling cases
1. payment terms
2. cash discounts
3. with- holding tax
4.next payment rundate
5. check payment block
let me know even checking of these things u have the same problems.
just now i discussed u over phone
if it is userful assgin the points
regards
venkat.

Automatic payment program how to explain in interviewes

hi friends
asking automatic payment program explanation in interviewes. how to explain the automatic payment program pls tell me my mail id [email protected]

The payment program can be broken down into the following steps:
1. Define parameters (Parameters TAB on the F110 screen)- Based on the parameters defined the program picks up the vendor 'open' items to be paid and displays them in the payment proposal. The parameters tell the program the following:
    a. Which company codes you want to include in this payment run (If the AP cleark who is running the program is responsible for only North American companies, he/she will include only those company codes in the payment run)
    b. Which Vendor you want to pay (suppose there are lot of AP clerks in an organization, they can use this to restrict the selection to the vendor for whom they are responsible for payment)
    c. What are the payment methods you want to use to pay these vendors
    d. What is the next date when you will run payment run. Based on this date the program picks up all the items which become due till the next date of payment run, even though those open items are not due today.
2. Free selection TAB - In this TAB you can restrict the 'open' items you want to select. You can use any field in the BSEG table and restrict the selection. For e.g. You can select the field ' Document no.' from BSEG and give a range of documents you want to pay. The program will pick up only those documents for payment.
3. Additional Log TAB - In this TAB you can select the logs you want the system to create if there are any errors or for all items even if there are no errors. If the results of the program is not what you expected, then you can read the log to understand the reason why the program did not select what you wanted.
4. Print/data medium TAB - Here you supply the program variant for all the payment methods you are using. For e.g. in US if you use the 'Check' payment method, then in this TAB you supply the variant for the RFFOUS_C program. If you are using EDI payment method then a variant for the program RFFOEDI1 has to be supplied in this TAB.
5. Status TAB - Once you enter all the information in the above 4 TAB's you will come to the status TAB.
Initial status will be 'No Parameters have been entered'
Before you run the program, the status would be 'Parameters have been defined'.
After you run the proposal the status will change to 'Payment proposal has been created'.
After you run the Payment run the status will change to 'Payment run has been carried out. Posting orders: 10 generated, 10 completed'.
Thus the status tells you in what stage of the Payment program you are in.
Please note that the buttons you see here is dynamic. Based on the status the button will appear or disappear. But all the functionalities which these buttons offer can also be selected using the dropdown list appearing at the top of the screen.
6. After you completed the payment run, you have to print the payment media - If the payment method used is check, you print checks. If it is wire then you create the wire file etc. This is the last step in the payment run.
Important Note: After running the proposal, you should not leave the payment program. Either you should complete the payment run completely , all the way till you print the payment media, or delete the payment proposal.
If you do not delete the proposal, then the vendors in this proposal will not be included in any of the subsequent payment runs.
Hope this helps you in answering your Interview questions.
Good luck.
Kalyan

Issue with check generation in Automatic Payment Program

Hi experts,
I need your inputs for an issue with check generation in Automatic Payment Program. Trying to make a payment to a US vendor with payment method C. The due item is getting picked up and a clearing document is getting generated. But Check is not being generated, niether can I see an entry in PAYR table. However, if I try to generate a check manually in FCH5 for the same clearing document, it is working.

Have u checked the Variant created in F110 - Printout / data medium, whether the Hose bank details are correctly set or not.
If yes, check the Printer details
Let us know the results
Thanks

Automatic payment program spool not created

Similar Messages

Maybe you are looking for