Automatic Payment Program - issue

Hi,
When we are executing the foreign currency payment through F110 we are getting the below issue.
Scenario:
Company code currency: INR
House bank (for example Citi Bank) and APP customization is already for local payments. Now we have done customization for foreign payments. steps are as mentioned below.
1. SET UP PAYMENT METHODS PER COMPANY CODE FOR PAYMENT TRANSACTIONS - here we selected "foreign currency allowed"
2. SET UP BANK DETERMINATION FOR PAYMENT TRANSACTIONS - under BAN ACCOUNTS - we have customized as mentioned below.
House Bank Payment method Currency Account ID Bank sub-account
CITI C USD CITI1 212002
3. Payment method is assigned to VENDOR.
when we are running F110 that time when we are selecting the above payment method and account id that time system is throwing the below error message.
"Only the following accounts can be used: 000"
This "000" is the Account ID for local payments. when i select this Account ID then system is allowing the payment but when I am selecting the Account ID "CITI1" (which is having USD currency) that time it is throwing the above error.
So friends can you please share your thoughts on this issue.
Thanks in advance.
Rams N

HEllo,
I"m not sure if I understood all you have done but I'll try to explain:
The payment program, in bank determination-bank accounts, can only
assign one account id for every house bank, payment method and currency.
So, this means that for one payment method in one of your house-banks
you can only use one account ID.
In fact, there are bank account checks are processed at document level and the
functionality of changing the bank account at payment document level
is not available in the standard system.
On the other side, you have the opportunity to define a second and
third house bank with the same bank key to meet your requirements.
REgards.
REnan

Similar Messages

Automatic Payment Program Issues

<h4>I have been trying to do the configuration for automatic payment and I keep getting this same error after the payment proposal is run. The payment proposal is created but all the invoices are put on the exception list. To help with the diagnosis I have attached a copy of the proposal log below. I think the error is 'In table T074U, the entry K is missing.' I will be very grateful if someone can provide the needed advice. Thanks in advance.
> Payment method selection for items due now to the amount of NGN    4.450.000,00-
> Payment method "S" is being checked
> Bank details are being checked
>   System reads house banks and checks if they are allowed
> Our bank ZBANK is being checked
> For currency NGN and 999 days 99000000.000,00 are planned
> Available amount is enough, 99000000.000,00 NGN still available,    4.450.000,00 necessary
>   House bank is selected ...
>    Our bank details ZBANK VAT-A are used
> Payment method "S" is permitted
In table T074U, the entry K   is missing
Information re. vendor 1000014 / paying company code MOF1 ...
... payment not possible because of reported error
End of log <h4>

Hi Ben,
My research led me to try the OBXT transaction code earlier. I made an entry for with Special G/L indicator of K and it still did not solve the problem. In fact, when I run the OBXT I do not get to see the entry I made. It is only when I attempt to repeat the entry that I get a message that the Special G/L indicator already exists.
Any other way I could get around this? It is really sad because I have not been able to run the APP even after so much effort put to configuration.
Regards,
C

Issue with check generation in Automatic Payment Program

Hi experts,
I need your inputs for an issue with check generation in Automatic Payment Program. Trying to make a payment to a US vendor with payment method C. The due item is getting picked up and a clearing document is getting generated. But Check is not being generated, niether can I see an entry in PAYR table. However, if I try to generate a check manually in FCH5 for the same clearing document, it is working.

Have u checked the Variant created in F110 - Printout / data medium, whether the Hose bank details are correctly set or not.
If yes, check the Printer details
Let us know the results
Thanks

Automatic payment program - urgent

Dear all,
i configured automatic payment program. when i run the automatic payment program using f110, accounting documents to Vendor account and house bank account are not generated. In the status bar, only the following messages appear:
"Parameters have been entered"
"Payment proposal has been created"
"Payment run has been carried out"
The following message is not appearing:
"Posting orders: X generated, X completed."
Can anyone guide me to solve this issue?
Will award maximum points.
Thanks in advance,
Regards,
ar

Hi,
You get the message Posting orders X(Ususally no. of documents) generated and X completed, it means that your proposal was successful. You will not get the document number in the status. Click on the Payment proposal log to view the document number generated.
Regards
Sridhar

Automatic Payment Run Issue

Hi,
In my company I want to do the automatic payment run with the customer setoff & customer open items document currency is USD & vendor document currency is LKR .I want to do the payment run in LKR.(My company code currency is LKR) I have defined the payment method "C" in both the Master data ( Customer and Vendor). Now I am trying to run Automatic Payment Program. But system shows all Customer invoice in exception list and display the following given below message. Can I run the automatic payment program using difference currencies? Please advice me to resolve the above issue.
Further this process I am doing for LKR customer & vendors & its working fine without giving any issues.
Enter a payment method for incoming payments
Message no. FZ010
Diagnosis
The balance of the items to be paid requires a payment method for incoming payments. You specified a payment method that is defined for outgoing payments.
System Response
The payment method is rejected.
Procedure
Enter a payment method for incoming payments
Thanks
Chrishantha

Hi,
I have created incomming payment method under this company code & asing to the customer master records.
How can I select multiple payment method at the time of doing auto payment run
Further , I didn't do any changes in vendor master records since I have to do the outgoing payment also
Please advice
Regards
Chrishantha

Automatic Payment program -line item cleared not displaying in table

automatic Payment program -line item cleared not displaying in table
i have re run the APP program DUSR1 same earlier it has run twice but table dose not show double payment to vendors how to resolve the issue.
Can some one please guide me on this.

Hi Priyanka,
First, which table are you referring to. If your fist APP run clears the line item, it will no longer be available in the open item.
Please be more specific on the problem so that we can try to help you. If possible, please provide screenshots.
Regards,
Ganesh

F110 Automatic Payment program

Hi ,
We have an issue in th Automatic payment program F110.
We have a few vendor invoices ( 1500 euros ) for a vendor X. There is also a credit memo for that vendor (100 Euros ). When we run F110 the credit memo is going to the Exception list with an error message "001 No pymt possible because items with a debit bal.still exist "; and the invoices for 1500 euros had been paid.
Please let us know why the payment program could not net off the Credit memo against the invoices making into a payment of 1400 Euros only to the vendor.
Your response would be much appreciated.
Thanks
Balaji
Edited by: Balaji Dhanave on May 15, 2009 12:53 PM

Hi,
You will first have to CLEAR the credit memo for that vendor (100 Euros) against the invoice raised and then run the payment run for the balance credit amount. Payment run will not execute if it finds any debit balance as open item for the vendor.
Thank You.

Automatic Payment Program Proposal split same vendor invoices

Hello,
We are facing some peculiar issue in Automatic Payment Program,when we run the automatic payment program payment proposal split the same vendor invoices into so many differnt proposals instead of consolidated proposal.
Every time it's not happen to same vendor it's dynamically changing to different vendors.
Eg:We have 10 vendor invoices and when we run the payment run 2 invoices is coming together and 3 invoices coming together not 10 same.
I have checked the vendor master data and payment program configuration for payment method for company code there is no tick selected for individual payment.
Could you some body explain me why system is behaving this way.
Thanks in advance.
Regards,
Satya

Hello Staya
Just check the line items of your vendor. Some line items may have the payment methods and some line items may not have the payment method. When you do the run in f110 it culbs all the invoices which have the same payment methods together and make the payments. Pls check this and see.
It could be the reason if you have not ticked the individual payments in vendor master.
Niranjala

Automatic payment program for customer

Hello!
I have the next issue: I want to pay physically (give money from bank) to somebody (a commission). In the system, this person is defined as customer. Can I use the automatic payment program for a customer(as it is in SAP system) and send the payment to MultiCash in order the money can go out from my account?(I want to really pay somebody defined as a customer and use the APP and Multicash)
Thank you!

Yes, as long you have an open item on the customer account that needs paying.
In F110 you see vendor_and_customer in the parameter screen.
Hth
Hein

Urgent - Automatic Payment program

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hello,
The automatic payment program picks up the documents that have been cleared in the last year.
what could be the reason for this?
Please advise
Regards,
Jay

Hi
Not clear what the issue is. Please explain in detail with details of the run date and id.
Karthik

Related to automatic payment program (F110).

Hi!!
Issue is that :
SAP Automatic Payment Program :F110 creates payment in compliance with country.The has to be saved on SAP server....
(Payments run per company code)company code 230-->>create DME file >> (format per country)BACS (UK)>>then saved to sap server.
I want to know what all has to be done to perform the task & in which format it will be saved to SAP server.
Please reply soon!!
Thank You
Amit.
Edited by: Amit Kumar Singh on Feb 25, 2008 1:14 PM

Please reply soon!!
Thank You..
amit

While Running Automatic payment program can't post any of the vendor docume

Hi Team,
I am Running the Automatic payment program in (F110) by assigning all of my company vendors (Ex. 0 to 9999) Normally i will take 10 to 20 hours time to complete the proposal.
In time of APP running when i am trying to post the any of the vendor document it is not allowing to post and getting the error as " Account .......... is blocked by the payment run"
Please give me the solution.
How can we post any of the the vendor documents when the APP is running.
If the APP runs 20 to 30 hours means we can not stop the vendor transactions.
Thanks in Advance
Vasavi

Hi Vasavi,
I understood your question.
What Iam asking is you to run the APP in background. SAP gives you a option to run the APP in background using T.code F110S.
If you have multiple company codes and multiple vendors you can break the APP into several runs so that system will not take much longer time.
The solution given by me will reduce the time taken for APP but it cant resolve the blocking issue. Once your APP runs with in 12 hrs (May be you can schedule a job in night), this may not interrupt the regular business like posting of Invoices in F-43 etc.
Thanks
Aravind

Question about automatic payment program

Hi Experts,
Need your help to solve below issue.
Compmnay code "1111" is central compasny code,which is making payments to vendor "dddd" through automatic payment program on behalf of other company codes(2222 and 3333).
Issue1:Company code "1111" has open item 1000 with respect to vendor "dddd" and company code "2222" has open item 3000 with respect to same vendor.
when i execute APP it is issuing two different checks though vendor is same.Single check should be issued as per my requirement.
Let me know about the configuration.
issue2: Compnay code has "1111"credit memo amount 10000(debit balance) in vendor "yyyy" in the year 2010 and since 2010 no invoices in comopany code "1111" but company code "2222" has invoice amount 15000 for the same vendor.
My requireemnt is check shoud be issued for the amount ( after diducting credit memo amount from invoice amount) in APP.
Please let me know about configuration.
Regards,
Uma

Hi Expert,
To pay with one check, you need to the below configuration. Go to T-Code:OBVU and do the below steps, according to your requirement.
and Select payment method supplement (check box)
Specify the sending company code if you want to pay using a cross-company code transaction but do not want to pay the items of all participating company codes together.
Examples
Example 1:
Company code 0001 pays its own items and the items of company codes 0002 and 0003. All items are grouped into one payment.
Company code Paying company code Sending company code
0001 0001 0001
0002 0001 0001
0003 0001 0001
Example 2:
Company code 0001 pays its own items and the items of company codes 0002 and 0003. However, a separate payment is created for each company code.
Company code Paying company code Sending company code
0001 0001 0001
0002 0001 0002
0003 0001 0003
Regards,
GK
SAP

FI-AP - (Automatic Payment Program - Vendors) - Cheque Re-Assignment

Hi Experts,
Can some help me on a real-time issue on FI-AP Accounts Payables - Vendors - Automatic Payment Program - Cheque Re-Assignment Problem - which I am facing.
I have assigned a wrong cheque No. to a payment document through automatic payment program. Actually, this Cheque No. should be assigned to some other payment document.
How, can I release / set free this cheque no. and re-assign it to some other payment document.
I will awards points with an open heart.
Thanks & Regards
Rajeev Sharma

HI,
As u r use the automatic payment program - and when u use the automatic payment program the check number are assign in automaticly.
So this are assign when u do the check printing. So once u think the wrong number are printed , u have to void the check number and write manual check and assign to the line item.
FCHE - Voided Checks
FCH5 - Manual Checks : Write manual check
hope this is clear Assign some points.
With regards
Krishna Singareddy

How to put default section code in Automatic payment program(F110)

Hi,
Is it possible to put default section code(BSEG-SECCO) in transaction code F110 for down payment transactions through Automatic payment program.
in our company section code is required field for vendor transactions, if i am doing the transaction F-48 or F-53 or F-58 , i can able to give the input for section code, But when i am executing the auto payment against payment request system showing the error message 'Please Enter 1001 As Section Code" based on my validation rule for section code for posting key 29 with account type K
How to overcome the above section code issue in auto payment without deactivation of validation.

Hi,
Just confirm how many section codes you are having.
If you are having only one section code for your company code then you can achieve this by developing a substitution rule.
T.code GGB1
Prerequisite
BSEG-BUKRS = 1000(give your company code)
Substitution
BSEG-SECCO=1001(give your section code)
Here take constant and give section code manually
If you are using business area then you need to give business area in prerequisite and respective section code in substitution.
After you define the substitution you need to activate for your company code through T.code OBBH.
Revert if you have any queries.
Regards,
Sankar
Edited by: Durgasankar.Innamuri on Jul 30, 2010 12:11 PM

Automatic Payment Program - issue

Similar Messages

Maybe you are looking for