Automatic Purchase Requisition

Dear Gurus,
Plz. help me out in configuring the scenario
My client had two plants one at Bangalore and the other at Mumbai.
If we rise the sales order from Bangalore Plant, the system should automatically trigger purchase requisition as we procure the goods from third party. And at the same time when we rise the sales order from Mumbai Plant, purchase requisition should not trigger as the goods are readily available at Mumbai Plant.
Thanks in advance.

Hi
This is a challenging scenario
See the PR requisition automatically generated on saving the sales order is triggered from Schedule line category controls
For third party we will have schedule line triggered as CS which has order type as NB(which really triggers PR) and item category as Third party and Account assignment category as X which really controls the whole scenario
My Suggestion
While creating the material for plant Bangalore in MM01 you should have the entire third party settings like for item category group as BANS in sales org 2 data and in the purchasing data Automatic PO ticked like the entire third party settings
While creating the material for plant Mumbai in MM01 you should have the entire Normal settings like for item category group as NORM in sales org 2 data
In CMR and MMR dont maintain the delivering plant
In MMR at sales org data 1 dont maintain delivering plant
In MMR have different MRP types or bangalore plant and mumbai plant while creating MM01
Because this MRP type along with the item category triggers schedule line category
While creating the sales order you have to manually input the plant in the shipping data of item details
You should make customizations so that if you input bangalore plant the item cat triggered should be TAS and if you put Mumbai plant the item cat triggered is TAN
I feel this is possible by customization (right now i dont have access to SAP otherwise  i would have tried out this whole process)
Pls try whether these suggestions are working put?
Have you tried this?
When creating the material in MM01 for  plant bangalore item category group as BANS and its subsequent settings will trigger PR
When creating the material in MM01 for  plant mumbai item category group as NORM and its subsequent settings will not  trigger PR and the same should be a normal process
Regards
Raja

Similar Messages

  • Automatic Purchase Requisition using Reorder Point without MRP Run

    Dear Freinds,
    My client wants Purchase Requisition should be automatically created as soon as the stock falls below reorder level without MRP run.
    Is this possible? if possible then what are the settings required.
    Thanks
    Prashant Atri

    Dear,
    It is not possible in standard SAP.
    What is the problem to take MRP run?
    You can take the MRP run in background through MDBT so system will create automatic Purchase Requisition using Reorder Point.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Automatic Purchase Requisition Creation in MRP run

    Hi,
    1. I create a Sales Order for quantity 20 of main material MAT which has two sub-components - COMP1 and COMP2. The plant in which this sales order is being created does not have any stock quantitiy of the material or its sub-components. For quantity 20 of the main material, quantities required of the sub-components are 40 and 60 respectively.
    2. I run MRP using transaction MD03 for the sub-components. This created purchase requisitions for the sub-components automatically. But, I see that the system creates only one purchase requisition of quantity 40 for COMP1 but two purchase requisitions for COMP2 each having quantity 60.
    Can you please tell me why is the system creating two purchase requisitions for COMP2?
    Thank you,
    Helpful answers will be immediately rewarded!

    Hi Janakiraman,
    I compared the parameters - Safety stock, Lotsize, Maximum Lot Size, Reorder point - between the two components but found all the values to be same.
    The only difference I found in the parameter values was...
    For COMP2 (the one for which 2 PRs were generated) 'Special Procurement' field was blank
    For COMP1 this field had the value 4A which means "STO from X101 plant"
    Do you have any idea what could be the reason?
    Thank you.

  • Automatical Purchase Requisition Creation in MRP run

    Hi,
    1. I create a Sales Order for quantity 20 of main material MAT which has two sub-components - COMP1 and COMP2. The plant in which this sales order is being created does not have any stock quantitiy of the material or its sub-components. For quantity 20 of the main material, quantities required of the sub-components are 40 and 60 respectively.
    2. I run MRP using transaction MD03 for the sub-components. This created purchase requisitions for the sub-components automatically. But, I see that the system creates only one purchase requisition of quantity 40 for COMP1 but two purchase requisitions for COMP2 each having quantity 60.
    Can you please tell me why is the system creating two purchase requisitions for COMP2?
    Thank you,
    Helpful answers will be immediately rewarded!

    Hi Janakiraman,
    I compared the parameters - Safety stock, Lotsize, Maximum Lot Size, Reorder point - between the two components but found all the values to be same.
    The only difference I found in the parameter values was...
    For COMP2 (the one for which 2 PRs were generated) 'Special Procurement' field was blank
    For COMP1 this field had the value 4A which means "STO from X101 plant"
    Do you have any idea what could be the reason?
    Thank you.

  • Automatic purchase requisition created from routing needs to be have material no. information in it.

    Hello Experts,
    There are some operations in my routing where external service , from an outside vendor shall be required.
    We are doing this by using a particular control key PP02, for this routing, so that purchase requisition is created automatically, when the production order is created.
    Through customization, I have also been able to make the setting so that instead of single, collective requisition gets  created for the entire order.The requisition that is getting created is a service requisition and can be later converted to a Purchase order.
    Requirement :-  I need to enter material information in this requisition automatically. By material, I mean the material no. and preferably qty of the material,  which will have to be sent out to the external vendor for his services.
    How can I achieve this, in SAP?
    Regards
    P.R

    Hello Caetano,
    Right now we are not considering best practices , so not considering BADI implementation as such.
    So far I have done the following:
    I created a subcontracting purchasing info record for the material and a vendor.
    Then, I have created a routing for the material and the operation which expects to go for external processing, I have used control key YBP2 (tried with PP02) in it.
    I have assigned the subcontracting PIR under the external processing section of this operation in the routing.
    My Production version combines the BOM and routing in the material master.
    Now ,,when I try to create the production order, I get the following errors in succession:
    Control key YBP2: Maintain external processing data
    Message no. CO558
    Diagnosis
    The control key specifies that the operation is processed externally. However, not all data relevant to external processing has been maintained.
    respond by entering the material group where the cursor is.
    Then I get the following error.
    Material class differs from material class  from info record
    Message no. 06354
    Diagnosis
    The material class or material group of the info record differs from that of the item.
    I checked in the material master and the material group there is same as the material group in the info record . Field name is MATKL.
    What material class is it talking about?
    I cannot get past this error and therefore cannot complete the order creation.
    Regards
    P.R

  • Sales order - automatic creation of purchase requisition - cost assignment

    Hi
    When the sales order is released, we have an automatic creation of Purchase requisation. We have given "internal order" as the cost obect in the sales order. But when the system has created automatic purchase requisition, it has not picked internal order. What could be the reason?
    Thank you for the help.
    Thanks
    Ram

    Hi
    I feel that it is abug in the development you have carried out for creation of Purchase requisition when a sales order is relased,
    Please check the enhancement, you need to pass the values to the correct table after derivation.
    Thanks & Regards
    Kishore

  • Sales order - automatic creation of purchase requisition - CO assignment

    Hi
    When the sales order is released, we have an automatic creation of Purchase requisation. We have given "internal order" as the cost obect in the sales order. But when the system has created automatic purchase requisition, it has not picked internal order. What could be the reason?
    Thank you for the help.
    Thanks
    Ram

    Hi
    I feel that it is abug in the development you have carried out for creation of Purchase requisition when a sales order is relased,
    Please check the enhancement, you need to pass the values to the correct table after derivation.
    Thanks & Regards
    Kishore

  • Purchase Requisition & Production Order

    Hi all,
    in my system, MRP create automatically Purchase Requisition.
    I would like to know if it is possible to connect Purchase Requisition to number of Purchase Order that have generated MRP requirement.
    For instance, in Transaction Me57, i have a list of Purchare Requisition that can be converted in Purchase Order (Assign & Process Purchase Requisition).
    Can i see in it the Production Order that have generated them???
    Or in another transaction?
    The purchasing office have the need to see which Purchase Requisition are from Production order 1 and which for Production order 2.. and so on..
    Thanks  a lot
    Best regards
    Alba

    HI...
    go to COOIs,
    Give the plant.. and execute.. In the resulting screen of production order, Go to change layout and include Purchase requisition in the list..
    This will feed your requirement..
    karthick

  • Exclude Purchase Requisition as a source of requirement

    Hi All,
    Please help me to configure the scenario.
    Sales order is created - Plant A, Sales Org u2013 A. (Item category u2013 BANC, Plant B is created as a vendor for Stock Transfer Purchase Order)
    Production Happens in - Plant B
    Present scenario u2013 we create sales order in SO u2013A, against plant A----automatic purchase requisition is created in Plant A against vendor Plant B. whenever we run MRP against plant B it create planned order against stock transfer requisition. From that planned order we get prod order and produce the material and deliver STO and finally customer.
    ***but our requirement is whenever we run mrp in Plant B it should not consider purchase requisition as source of requirement and will not create Planned order until or unless PR in plant A is converted to PO.
    I will be waiting for your valuable reply.
    Regards
    Nirmal

    hi,
    I am sorry as I was away  for  2 weeks.
    I think the  OPPQ settings may not do the trick for you  as  that is just stock in transfer  ( not stock transfer request from other plants).
    For the user exit details  which I was talking before,  you can see the link below
    How is the requirement type for STO materials determined
    hope this helps.
    regards
    Rav

  • Automatic purchase order deletion after SD order is deleted

    Hi forum,
    I managed to get the automatic purchase order creation to work. Now I have a few issues about it.
    - why is the workflow not deleted after the sd order is deleted?
    - why is the purchase requisition not deleted after the sd order is deleted?
    Thank you for help!
    Regards,
    Florian

    Hi
    If you delete the sd order, then automatically purchase requisition will get deleted.
    First you delete the sales order, and do the MRP Run - MD02 and view the requirement at MD04. Automatically requiement will get deleted.
    Reward if it helps
    Regards
    Prasanna R

  • Automatic Creation of Purchase Orders from Purchase Requisition

    Hi,
    Requirement: When the Purchase requisitions is converted into Purchase Orders using ME59N, the document type of the PO should be ZCO (Z document type for Call off) and not NB.
    Issue:When the Purchase requisitions are converted into PO's using ME59N, noremal PO's(Document type:NB) are getting created.
    As per the business requirements, it should be ZCO.
    Please guide if I am missing anything.
    With regards
       Krishna

    Hi
    Please refer the below thread.
    OSS Note 114213
    [ME59N - Automatic determination of POdocument type|ME59N - Automatic determination of POdocument type]
    Gobinathan G
    Edited by: Gobinathan Govindarajan on Nov 26, 2009 11:15 AM

  • During automatic creation of the purchase requisition to operation 0010

    Hi,
    Problem occurs in automatic cration of PR.
    Error : During automatic creation of the purchase requisition to operation 0010, an error (06 532) occurred:message c2325
    Regards,
    Vivek

    Hi ,
    I am getting error in CO01 Transaction.
    Message no. C2325
    For further proceedings, read the long text of error message (06 532) in transaction SE91. Check the operation affected and change or complete any missing data that led to the error message.
    Regards,
    Vivek Nehete

  • Avoid  automatic creation of purchase requisition for bom item N

    Dear.
    When I create a production order , for the components  with bom item N the system create a purchase requisition. I need to avoid this automatic creation , do you know a solution to obtain this ?
    Thanks.

    For the many people that have asked this question.
    N item category in the BOM is always going to propose direct procurement. Through configuration I have not found a way to make it go away from the planned order. You can make it go away from the production order.
    The IMG path: 
    Plant Maintenance and Customer Service 
    -> Maintenance and Service Processing 
    --> Maintenance and Service Orders 
    ---> Functions and Settings for Order Types 
    ----> Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval
    Under the Res/PurRq -> Specify Never
    In order make this setting effective, you must define the following
    system message to error or warning, as it is stated on note 569984
    Version Appl.A. No. Cat
    00000000 C2 280 W
    Please note that this setting is effective for reservations and
    requisitions.
    The best solution is to use BOM item category L with the bulk indicator set. You will not get any direct procurement proposals or planned orders and you can use long term planning to see the time phased MRP results.

  • Automatic creation of purchase requisition for semi-finished product HALB

    Hi Gurus,
    We want the MRP to generate automatically a purchase requisition, instead of a planned order, for a semi-finished product.  Of course, we still want to be able to convert it to a planned order.
    thanks
    Jean-Francois Millaire

    Hi Jean-Francois Millaire,
    You want a purchase requisition after MRP run & you should also able to convert that purchase requisition to planned order,If i understood correctly, hope this is your requirement
    First one is possible -in MD01/MD02 maintain create purchase requisition as "1"
    Second is not possible,its not possibel to conver a PR(purchase requisition to Planned order where as vice versa is possible
    confirm my understanding,pls revert if you differ
    Regards,
    SVP

  • IW31-Create Purchase Requisition automatically from PM order - Release 5.0

    Dear Experts,
    Currently we are working in the 4.6C Release but we are doing the migration for 5.0. In PM, in the 4.6C release when we
    create a PM Order in tcode IW31 we select a component and the system shows us the screen to inform the quantity and
    automatically the system shows us a  screen to Create Purchase Requisition where we can fill or select some fields.
    However, when we create a PM order in the  5.0 using the same tcode, the same material type, the system creates
    automatically the Purchase Requisition without to show us the screen to fill or select the fieds. I´ve checked the customizing
    comparing the systems but I couldn´t find something.
    I was wondering If you could help me with this issue?
    If my comments are not enough to understand me, please let me know...
    BR
    Valdevair

    Dear friend,
    Do check configuration node at
    plantmaintenance and custonmer service - maintenance and service processing -maintenance and service orders - functions and settings for order types - define change documents,collective pur.requisitionsindicator,operation no.interval
    here for your order type and plant  , check whether generation of PURCGHASE REQUISITION from maintenance order settings.
    there will be three options
    1) never
    2) from release
    3) immediatly.
    hipe this will help you.
    Regards,
    pardhu

Maybe you are looking for