Automatic re-route in Maps

How to re-route navigation easily (should do it automatically) in Maps?
Scenario:
1. Set target address and let Maps calculate route. so far, so good
2. Start driving. As long as you stay "on route",things are ok
3. You notice that Maps route is not optimal and start driving your own route. Maps does not care..
4. In order to re-calculate route from your current GPS position to same target address. Maps UI gets very clumsy. First you need clear the map, re-enter the target address (well..luckily it's still in search window), ask to  Maps to re-route. While doing all this, your car is prob. out of the road already..
Why Maps doesn't re-calculate the route automatically when it detects that the GPS position is well "off-the-route". My friend was using his iPhone 3GS + navigation. It did the thing as expected.
is this common behaviour of Nokia Maps, or just the N900 version that lags well behind other versions.

It's just the N900 version that has this "bug", I'm afraid.
We're all waiting for the full version of OVI Maps to come from Nokia, to give us the same as all their other GPS phones, that gives you a Voice Guidance for Turn by Turn.
If you can't wait, then try Sygic's effort, which has now just been updated to version 10.  Shame that you have to pay extra for something that Nokia should be providing free to us, like they have done for all the other phones... 
If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

Similar Messages

  • How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

    how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

    Hi ,
     Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA  outside interface . 
    Accordingly you can configure NAT 
    HTH
    Sandy . 

  • Strange route in Maps 2.0

    If the map itself is wrong Navteq is the one to blame.
    What if the route that Maps 2.0 creates is totaly bizzare?
    Whos fault is that? Nokia?
    Message Edited by smoketoomuch on 07-Nov-2008 02:14 PM
    Solved!
    Go to Solution.

    LOL, Sight seeing mode?
    I can't say I have ever experienced the U-turn back phenomenon although there is a sharp left turn on one of my regular soutes which the voice instruction calls a u-turn but the map still shows just a sharp left turn.
    With regards to the route through housing estates, Maps calculate routes based on road information provided in the map data. It does not know if a road goes through an estate or not. Perhaps the map data specifies the road through the estate as a major road.

  • Routing with Maps and Contacts

    Before 1.1.3 update, I was able to select an address from a contact and use it as source or destination. After installing the 1.1.3 update, nothing gets selected from the contacts while routing with maps.

    Yep...its a glitch of some sort. Go into your contacts and edit the address. Then, select the country from the scroll menu. That should fix it up. Major pain though to do that with every contact for which you have an address.

  • Can't create correct routes in Maps

    Why is it that when I'm creating a route in Maps, the outcome varies dependent on how I created the route, thus using the same route parameters?
    I've created the same route using different ways of creating the route, and the created route is different every time.
    If I create the route in Maps using the search facility, the route is different if I use an address via the people and contacts interface. And again it is different when using Drive.
    I made the discovery when a suggested route made a 16.2 km de-tour on a 11 km stretch. More than a 100%. I'm now wondering if I dare to use NOKIA maps for my summer trip to Italy from Denmark.
    NOKIA -
    Please make a navigation app where I can define my own waypoints. This is essential in every navigation system.
    Please optimize the app, so I can choose an alternative route - this is basic in most modern navigation systems.
    Honest differences are often a healthy sign of progress. - M. Gandhi

    -Rich
    Thanks for your reply. Sorry for not writing phone model and software release.
    It is a Lumia 920 and I'm using Drive +Beta 2.1.0.1451
    I'm also setting the trip options like fastest / shortest, toll roads etc. In this particular case I'm referring to with, a D-tour of more than 16 km on a stretch of 12 km, it doesn't matter how I set my planning options - I'm getting the same result.
    Being well aware that the program makes some mistakes like this one, it would be nice to be able to plane the route in details by using waypoints. That is not possible at the moment with the present software by NOKIA.
    Honest differences are often a healthy sign of progress. - M. Gandhi
    Attachments:
    wp_ss_20130106_0001.png ‏168 KB

  • WRT610N - Storage - Password access to router's mapped drive with XP Home

    Is there a way to bypass the Linksys login screen when clicking on the router's mapped drive in XP Home?

    We might have two things being discussed here - 1) changing a password to a existing storage account and 2) the problem of windows storing the user/password for a mapped drive after a reboot.
    I'm struggling with with windows storing the user /password for my mapped drive (the external hardrive plugged into the router's USB).  If I can't figure this out...I might as well return the router?!  I have the "reconnect button" checked and "connect using a different user name" filled out properly. So what's the deal?  Maybe someone from Linksys should address this problem.  It may seem trivial to login every time but it ruins the way iTunes works and I'm guessing other music/photo software applications.  If itunes can't "see" the drive at login it deafults to your "My Document/My Music" directory so everytime you have to manual re-point the library.  I hope I'm clear.  Linksys please help!

  • How do I adjust the route in Maps?

    How do you adjust the route in maps. For example, if I wanted directions from my current location (using the crosshair) to a friend's house 5 miles away, the directions given to me by maps has me travel on a freeway.
    How would I adjust the route to avoid the freeway, take different streets etc? Being able to drag google's route on desktop is invaluable, but seems this feature is missing in iPhone 3g

    I hope someone listens to this suggestion - as it is one of the biggest weaknesses of Maps in its current form.

  • AP801 admin status is disable automatically after router reload

    We've got cisco 887VGW with wireless AP801GN and registering to the controller 7510, 
    ap801 admin status is disable automatically after router reload.
    Is there any opportunity to fix it?
    AIR-CT7510-K9 os version: 7.6.100

    (Cisco Controller) >show sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.6.100.0
    RTOS Version..................................... 7.6.100.0
    Bootloader Version............................... 7.3.101.0
    Emergency Image Version.......................... 7.3.101.0
    Build Type....................................... DATA + WPS
    System Name...................................... CNDGIDCWLC01
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1295
    Redundancy Mode.................................. SSO (Both AP and Client SSO)
    IP Address....................................... 10.15.131.46
    System Up Time................................... 3 days 3 hrs 40 mins 22 secs
    System Timezone Location......................... (GMT +8:00) HongKong, Bejing, Chongquing
    System Stats Realtime Interval................... 5
    System Stats Normal Interval..................... 180
    Configured Country............................... Multiple Countries:CN,HK,TH,US
    --More-- or (q)uit
    Operating Environment............................ Commercial (10 to 35 C)
    Internal Temp Alarm Limits....................... 10 to 38 C
    Internal Temperature............................. +22 C
    Fan Status....................................... OK
    RAID Volume Status............................... OK
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 2
    Number of Active Clients......................... 6
    Burned-in MAC Address............................ 64:9E:F3:65:2A:80
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Present, OK
    Maximum number of APs supported.................. 300
    (Cisco Controller) >
    Cisco IOS Software, AP801 Software (AP801-K9W8-M), Version 15.2(4)JB3, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Wed 18-Dec-13 21:56 by prod_rel_team
    ROM: Bootstrap program is AP801 boot loader
    BOOTLDR: AP801 Boot Loader (AP801-BOOT-M) Version 12.4(23c)JX, RELEASE SOFTWARE (fc1)
    NST6839 uptime is 4 hours, 32 minutes
    System returned to ROM by power-on
    System image file is "flash:/ap801-k9w8-mx.152-4.JB3/ap801-k9w8-mx.152-4.JB3"
    Last reload reason:
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AP801GN-A-K9 (PowerPC 8343) processor (revision B0) with 49142K/16384K bytes of memory.
    Processor board ID FGL164624AL
    PowerPC 8343 CPU at 400Mhz, revision number 0x0031
    Last reset from power-on
    LWAPP image version 7.6.100.0
    1 Gigabit Ethernet interface
    1 802.11 Radio
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 70:CA:9B:2F:49:30
    Part Number                          : 73-11027-11
    PCA Assembly Number                  : 800-28807-11
    PCA Revision Number                  : B0
    PCB Serial Number                    : FOC1634C1G6
    Top Assembly Part Number             : 800-33059-04
    Top Assembly Serial Number           : FGL164624AL
    Top Revision Number                  : B0
    Product/Model Number                 : AP801GN-A-K9       
    Configuration register is 0xF

  • Automatic wire routing settings

    Hi,
    I wonder if it is possible to set some settings of the automatic wire routing function in LV7 ?
    In my case the lv chooses always the wrong route�
    Kind regards,

    Here here!
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

  • Automatic update of Key Mapping

    Hello MDM Experts,
    We have got a legacy system which is the master source of information. Now if my repository has 10 fields for a material,and if 6 fields are coming from the legacy system then the rest of the 4 fields are coming from R/3 systems.so the data has to align together for a material in SAP MDM.
    In the legacy system for a material material number and RState(revision state) is the key where as for R/3 systems only the Material number is the key.There are also no global id's concept in this case.
    We need to investigate the posibility to delete key mapping values from MDM records automatically. I wasn't able to find such a functionality in the standard Import manager functionality. The scenario:
    In R3 side there is a record that is dynamic and always keeps the latest R State(revision state). So when we import that record into MDM we have material number and R State as a key mapping value (ROJ786501/1;R1A)
    When the record in R/3 changes the state (R State is changed) it comes to mdm as a new record with a new key mapping (ROJ786501/1;R1B) and the record which had a key mapping (ROJ786501/1;R1A) do not exist in the R/3 anymore so we need to delete the old key mapping value from the old record in MDM. Is this possible to do in an automated way?
    Would allocate points for helpful solutions
    Best Regards,
    CM

    Hello Michael,
    The material number and the RState in the legacy system are two different fields and RState is the Lookup field as of now. But the combination of both is the key in the legacy system.
    The issue is in the R/3, like there are some material which do not have the Rstate in the RState field but in the basic
    data text for the material there is the Rstate mentioned.And there are few materials where this Rstate is not mentioned even.And in the R/3 side Material number is the key.But We can customize the Idocs by putting one more segement for RState and populate the RState field by pulling the data from the basic data text and.So when there is no RState for a particular material then it would be a NULL and in PI we can replace it by using a '/' or something else.
    Now suppose i have a material ROK12456/1  and RSTATE as Z1A and have imported it to the MDM. Now if the RSTATE for
    ROK12456/1 changes to Z2A and in R3 always keeps the latest R State(revision state). So when we import that record into MDM we have material number and R State as a key mapping value (ROK12456/1;Z1A) When the record in R/3 changes the state (R State is changed) it comes to mdm as a new record with a new key mapping (ROK12456/1;Z2A) and the record which had a key mapping (ROK12456/1/1;R1A) do not exist in the R/3 anymore so we need to delete the old key mapping value from the old record in MDM. Is this possible to have this type of functionality and if yes then can we do in an automated way?
    Best Regards,
    CM
    Edited by: chinmoy mohanty on Feb 7, 2008 10:50 AM
    Edited by: chinmoy mohanty on Feb 7, 2008 11:18 AM

  • Is there a way to add a via point to a route in Maps?

    With the addition of Maps to Maverick is there a way to add a via point to a route between 2 points
    I might like to take a scenic highway for part of the trip or stop at a particular restaurant
    I don't see a way

    I was looking for this function to, but don't see it.  Looks like the Maps functions is a little thin right now.  Hopefully it will be expanding in the future.....hopefully near future.

  • Problem in automatic rate routing selection

    Dear all,
    I am using REM and according to that I have maintained REM profile in Material Master, rate routing, line hierarchy, production version, but the time of scheduling of planned order, system is saying " The automatic selection of routing is not possible".
    I suppose I am missing some configuration.
    As also, I have already done the same scenario in other server.
    If u have any suggestion then pl. forward me.
    Thanx,
    Das

    Dear SAP PP,
    1.Check whether have you included the check box for REM allowed indicator in the production version.
    2.Also ensure you have assigned the rate routing option for detailed planning and the correct group and
    group counter in the production version.
    3.Check the valdiity dates of the rate routing,try to create a planned order in some advanced future date
    so that your rate routing is valid for the planned order start date.
    4.Check the status and the usage of the rate routing.
    Regards
    Mangalraj.S

  • WRT54G Wireless Router - cannot map Windows 7 pc to a Western Digital sharespace drive

    I have a WRT54G Wireless Router.  I recently connected a Western Digital Sharespace external storage drive to the router using an ethernet cable.  Initially, I was able to map to the Sharespace device shares and create backup plans.  After a few months, I lost the drive connections (possibly during a power failure) and since then, have not been able to map to the drives again.  I can ping the Sharespace device and I can see the device in the router configuration screens. I have another computer on the same network, running XP, that is functioning perfectly.   I am wondering if I have a problem because my laptop is on Windows7 and this is a fairly old and unsupported router.  Should I change to a newer router? 

    If you are able to ping the drive then your computer is communicating with the drive and your router is working fine.
    Also your another computer is just working fine. I think this must be the issue with the settings on Windows 7 computer.

  • Can I create a multiple waypoint route in Maps?

    I would like to be able to define my own route in the Maps App instead of picking from one of the 3 offered.  Is there any way that I can force a route to go through a specific location?

    Hi HAMADART and welcome to our community
    I'm a bit fuzzy on what you are looking for.
    If you are asking if you can create a hyperlink from a text
    caption that will open a URL or something, the answer is that you
    can, but not like you think. You would insert a caption and place
    it, then insert a click box object and program it to point to the
    URL. Then place the click box object over where you want your user
    to click.
    If you are asking if you can create a link that forces the
    Closed Captioning to display, first off I'd wonder why a link when
    clicking the CC button is so easy. But if you are asking if there
    is a way to cause Closed Captioning to display without user
    intervention, you need to take a look at fellow Adobe Community
    Expert Paul Dewhurst's site and use one of his widgets.
    Click
    here to visit Paul's site.
    Cheers... Rick

  • Can you choose a different route in maps?

    I searched for directions in the maps app and it shows me a route that is way out of the way and is 16 hours compared to mapquest telling me 12 hours and a more direct route.
    I know that online at google maps you can choose from several route options, can we do this on the iPhone app?
    Thanks for anybody's help!

    oh wow, that's pretty disappointing. I'm always using Google maps at work to find places and then dragging the route around different streets to try to find the shortest distance or what *I think* will be the fastest route. That's a pretty major oversight to not let you simply drag the route around like you can on the real version.

Maybe you are looking for