Automatic start question

How do I disable the automatic start of iPhoto every time I connect a camera? My camcorder is also a camera but I don't want iPhoto to open. Thanks!

I also want to disable auto-start for cameras in iPhoto too, but I cannot find an option in the Preference Menu (iPhoto) or any other menu (iPhoto). Could someone point me in the right direction ???

Similar Messages

  • Reporting Services not automatically starting. System event log 7009, Application event: 18456

    For the past month (since Oct 11,2012)  reporting services (SSRS 2008R2) is not starting after the server is rebooted. The service is set to automatically start and starts manually without a problem.  The system event log contains the following error:
    Event ID 7009: A timeout was reached (30000 milliseconds) while waiting for the SQL Server Reporting Services (MSSQLSERVER) service to connect.
    SQL logs :
    The SQL logs has many "Event 18456 Login Failed, State 38" errors when the database engine starts. I assume clients conections are failing because the databases  aren't online yet. None of these 18456 errors coorespond to the account reporting services
    runs under.
    The SQL logs indication Event 7009 occures before the "ReportingServer" database is online so im assuming there is a dependancy but I don't know how to avoid this.
    This problem is occuring on a number of our servers running SSRS (if not all)
    Any ideas?
    Paul

    Hi A141695,
    For Event ID 7009, you can try to do the steps below to resolve it.
        1. Click Start, click Run, type regedit, and then click OK.
        2. Locate and then click the following registry subkey:
            HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
        3. Right-click Control, point to New, and then click DWORD Value.
        4. In the New Value #1 box, type ServicesPipeTimeout, and then press ENTER.
        5. Right-click ServicesPipeTimeout, and then click Modify.
        6. Click Decimal, type the number of milliseconds that you want to wait until the service times out, and then click OK.
    For example, to wait 60 seconds before the service times out, type 60000.
    Quit Registry Editor, and then restart the computer. For more information about it, please see:
    http://www.sqlservercentral.com/Forums/Topic850540-1550-1.aspx#bm851211
    http://myitforum.com/myitforumwp/2012/08/22/configmgr-2012-sms_srs_reporting_point-component-failure/
    If you have any questions, please feel free to ask.
    Regards,
    Charlie Liao
    TechNet Subscriber Support
    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.

  • Automatically start Front Row

    I've ditched the AppleTV in favour of a second Mac Mini. Much better. I'm streaming HDTV bitstreams and DVD (MPEG) bitsreams from a USB drive attached to Airport Extreme. (Simple alias creation in the MOVIE folder and additional components installed for Quicktime). No loss of quality through converting to h.264. No waiting around 24 hours to encode. Front Row interface is MUCH better than AppleTV interface.
    Two questions which I can't find the answer to: First, is there a way to automatically start front row? I would like the Mac Mini to automatically turn on (easy) and then automatically start the Front Row interface.
    Second, is there a way to modify the Front Row menu structure?
    All I would like is simply Videos: Movies. I would like ro remove (or hide) Sharing... Trailers... etc.
    Any help would be appreciated.
    Many thanks.

    You can write an AppleScript, that you add to your user's login items, that will open Front Row each time you login. You can find the instructions here to write the script:
    http://discussions.apple.com/thread.jspa?messageID=2148108
    I don't think there's anyway to change the built-in menu structure, though. It's hard-coded into Front Row. You can add folders and sub-folders to your user's Movies folder. Front Row will follow them down into all your video files.
    -Doug

  • Equivalent of sessionetc to "automatically" start applications on login ...

    JDS fans and experts:
    I'm in the process of getting our user community to move from CDE to JDS on our Solaris 10 machines.
    Because we have an environment where anyone logging into our machine is likely to want to run a particular application, we "automatically" start it for them in CDE by putting the command uses to start this application in the file named:
    /etc/skel/.dt/sessions/sessionetc
    When we create a new user, then all of the /etc/skel stuff gets copied into their home directory ... and, as a result, they all have a file named ~/.dt/sessions/sessionetc that starts the desired application for them each time they login.
    Is there an equivalent way to do this using JDS? Note: if it matters, we are using the latest JDS3 on Solaris 10u4 on an x86_64 platform.
    Thanks for your help,
    John

    JDS community:
    Well, I think that I'm close to being able to answer my own question as to how to set up an application to start automatically.
    As root, I've opened the file browser and pointed it to:
    preferences-all-users:///
    Then I double-clicked the Desktop Preferences icon followed by double-clicking the Sessions icon.
    That opens up a window with 3 tabs .... one being named: "Startup programs". That allows me to add additional programs to be started and assign it an order.
    Great! I added the program that I wanted ... and it starts automatically
    when I login again as root.
    Unfortunately, however, despite having done this in the preferences-all-users:/// section, it seems to only start the application
    when I login as root .... but doesn't seem to start it when I login as a normal user.
    Is there something that I need to restart in order for this to take effect for all users? Or do I have something else messed up that would prevent something that seemed to be added a a startup application for all users from starting for anyone but root?
    Thanks for any additional insights,
    John

  • I just bought macbook pro with 10.8.3 os. When i start the system, all applications automatically start up as well! How can I turn them off. I checked the user settings and no application is set tom open automatically!

    I just bought macbook pro with 10.8.3 os. When i start the system, all applications automatically start up as well! How can I turn them off. I checked the user settings and no application is set tom open automatically!

    You have 14 days to return the computer w/no questions asked.  Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.

  • Automatically start lync 2013

    we have deployed lync 2013 recently and if a user has never logged into a PC they need to launch lync for the first time manually before the program automatically starts.  after a user logs in and launches lync from then on the user will get lync automatically
    to launch after login.
    is there a way to launch lync automatically for everyone that logs into the computer?  that way as new users/profiles are created/used on the PC lync would launch automatically.
    BTW, under settings -- personal lync is setup to automatically start lync when i log on to windows

    Sure, there's a key you can push out with Group Policy:
    http://blogs.technet.com/b/rischwen/archive/2013/06/20/lync-2013-client-auto-start-registry-key.aspx
    HKCU\Software\Microsoft\Windows\CurrentVersion\Run\Lync"C:\Program Files\Microsoft Office 15\root\office15\lync.exe" /fromrunkey
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Can you automatically start programs when you switch on your imac

    can you automatically start programs when you switch on your imac

    Yes, go to: Apple / System Preferences / User Groups / Login Items and add the Application to the list of things automatically set to start at login.
    However, you should limit it to those that you need or use, because adding a lot will needlessly slow down your startup time and use more RAM.
    Message was edited by: den.thed
    Oop'  late on the draw again, glad your question is answered.

  • Three Getting Started Questions with RV180

    I recently purchased the RV180 router. I have a few quick "getting started" questions about using it:
    1. Is the "Static DHCP" the screen I need to use in order to reserve DHCP addresses (see attached)? That's where I've been reserving all my DHCP addresses with. I'm just making sure I have the correct screen.
    2. Do I need to do anything to "backup" my configuration, or will my settings still be around when the RV180 reboots?
    3. Do I need to run a check for firmware update on the RV180, and how do I update the firmware on the RV180 (as well as the SG200-18), or does it usually come with the latest firmware out-of-the-box? If I go ahead and put a service contract on the RV180 and SG200-18, will I receive my firmware updates automatically? Are the part numbers for the service contracts the same for the RV180 and SG200-18?
    Thanks!

    Hello,
    1. Is the "Static DHCP" the screen I need to use in order to reserve DHCP addresses (see attached)? That's where I've been reserving all my DHCP addresses with. I'm just making sure I have the correct screen.
    Yes, that is the correct location to set DHCP reservations.
    2. Do I need to do anything to "backup" my configuration, or will my settings still be around when the RV180 reboots?
    Whenever you hit save after making a change you configuration is saved and will survive a reboot.
    If you would like to save  backup copy of your configration file just go to Administration >> Backup/Restore settings.
    3. Do I need to run a check for firmware update on the RV180, and how do I update the firmware on the RV180 (as well as the SG200-18), or does it usually come with the latest firmware out-of-the-box? If I go ahead and put a service contract on the RV180 and SG200-18, will I receive my firmware updates automatically? Are the part numbers for the service contracts the same for the RV180 and SG200-18?
    You will need to manually update the firmware on the RV180.  That firmware is available here:
    RV180 Firmware
    It is simply one file, that you upload under Administration >> Firmware Upgrade.  There is no bootcode for the routers (like there was with your switch)
    You can locate this in the future the same way you did the SG200 firmware (because this link may change) on the Cisco website.
    As for the service contract, the part number for both of those devices will be CON-SBS-SVC2.
    Hope that helps, and I will try to get to your other questions sometime today as well.  Also since you just bought there you are of course welcome to call in and get some support over the phone, both your devices do come with 1 year of technical support, and it sounds like you are getting or have contracts, so I guess make that 3 years.
    Cisco Small Business Support Center Contact Numbers
    Thanks again for choosing Cisco,
    Christopher Ebert - Advanced Network Support Engineer
    Cisco Small Business Support Center
    *please rate helpful posts*

  • Hypev "automatic start action" not retained after live motion

    Hi,
    We have a hyper-v cluster of 2 windows 2008 R2SP1 nodes.
    We found that the settings we made in the VMs "automatic start action" were reset to "none" after migration between the nodes .
    We need to have it maintaned
    thanks
    Stefano

    Hi ,
    I think there may be something unclear in my previous email. Ok, I will detail it.
    If you make a virtual machine high available, the Automatic Start Action will not work after you perform a live migration. Which means the following setting will not be "failovered" to another host.
    You should set this via the Cluster Manager by the following setting:
    This is what I said:
    If you change the configuration of a virtual machine, we recommend that you use the Failover Cluster Manager snap-in to access the virtual machine settings. When you do this, the cluster is updated automatically with the configuration changes. However, if
    you make changes to the virtual machine settings from the Hyper-V Manager snap-in, you must update the cluster manually after you make the changes. If the configuration is not refreshed after networking or storage changes are made, a subsequent failover may
    not succeed or may succeed but result in the virtual machine being configured incorrectly.
    Thanks. Feel free to let me know if anything is unclear.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Hi Aaron ,
    yes I think there's a misunderstanding about the question .
    When you say
    "If you make a virtual machine high available, the Automatic Start Action will not work after you perform a live migration. Which means the following setting will not be "failovered" to another host."
    you mean that it is supposed to work this way ?
    I mean , If you make a VM HA with clustering is it an accepted behaviour that the setting of " automatic start action " ( not the stop action you posted the picture of ) is not maintaned after a live migration even if such setting is made through the failover
    cluster manager ?
    If you are telling me that this is what it is supposed to work I don't agree , because I wish I can have a way to set a priority in VM startup in the case of complete shutdown/reboot .
    Working with vsphere as well this is possible and I thought it was the same with Hyper-v
    To solve this problem I had to create a group policy's startup script for the cluster nodes in which I start the VM in the correct order with some timeout .
    Thanks
    Stefano Colombo

  • YouTube Videos on Safari automatically start to reload once iMAC is logged in

    Hello there,
    I have an issue bothering you since I upgraded my iMAC to Lion OS, hope you can help.
    Well previously when I had Snow Leopard as my OS, I could open Safari & view Youtube videos & in fact could have many Tabs in a Safari window, each having a unique YouTube video. Once I finished watching the videos, they could stay there if even the system logged out or went to sleep ... and when I would re-login  all the videos which were completely displayed would remain there & I could watch them rightawat again without having to reload them from Internet. Since I upgraded to Lion, whenever I view YouTube videos in Safari (one unique video on each tabbed page), they would remain there until the system remains logged in ... however if the system automatically logs out (due to prolonged in-activity) or goes to sleep and when I re-login then all the videos which were viewed already would automatically start to reload again.
    This is really frustrating, can you please guide if its some configuration issue? I reckon the videos which once gets into Safari cache should remain there (as was the case in Snow Leopard) but apparently Safari initiates a fresh reload once the system is logged-in & unnecessarily starts downloading vides again.
    Can you advise the solution?
    Thanks.
    MSZ

    Nevermind. I gave up and moved to Chrome. Having a much better time now, no worries.
    But hey, if you want to answer this question for anyone else that might have this problem, then by all means go ahead.

  • Application automatically starts during start-up

    Hi,
    just recently a strange and annoying thing is occurring. When I turn my computer on program I have automatically starts. It is a statistical program and so has absolutely nothing to do with the operation of the computer. I cannot find anything in system preferences that might give me a clue as to how to remove the "rogue automation" that seems to have developed. any suggestions? thanks.
    - Roger Coupal

    Apple menu -> System Preferences -> Accounts -> select the account, you'll find login items under the account in question. If the application isn't there, find out from the vendor of that application where they store their data. You can always use http://www.appzapper.com/ to remove the application as well, but I'd backup my data before trying to use it, just in case it is overzealous*:
    http://www.macmaps.com/backup.html
    * Links to my pages may give me compensation.

  • HelpPane.exe automatically starts with Windows 7 64bit.

    HelpPane.exe automatically starts with Windows 7 64bit.  I have to start task Manager and disable it or else it keeps popping up.  I cant find where to disable this service from startup.  Please Help.

    Hello
    I found a simple yet effective solution for this problem, my friend had the same issue so instinctively as a technician, I suspect this was a malware of somekind so I re-formatted and installed Win7 funny it's still there, so I did a Hard disk wipe using
    Dalvik's and re-partitioned and formatted again, to my surprise it still have the same problem.
    So I ask Mr. Goo' old Mr. Google for answer, but I've found more complications, sorry for the story, so without further a do, the solution.
    Boot to safe mode. (may also work in "normal mode")
    Go to Task Manager>
    Click the Services Tab>
    Right click "HelpPane.exe" or Help and support service>
    Select Properties>
    Click the Security tab>
    Click the Advanced tab (for permissions options)
    Then select the "permissions entries" one at a time>
    Click Change Permissions>
    Then click Edit>
    CLEAR ALL THE CHECK BOX FOR ALL ENTRIES
    This should prevent access to the HelpPane.exe to all users/programs.
    This resolved my friends Windows 7 "Help and Support thingy" issue, hope it does yours too.
    Message me for questions and/or clarifications/corrections.
    Thank you

  • How can I disable iPhoto from automatically starting when I connect my iPhone?

    Whenever I connect my iPhone to my Mac it automatically starts iPhoto?  How can I make this not happen?

    Go into iPhoto's General preference pane and set the Connecting camera opens to No Application:
    OT

  • How can i disable imessage from automatically starting up when i turn on macbook air?

    how can i disable imessage from automatically starting up when i turn on macbook air? i dont know my imessages to pop up on my laptop when it turns on. But i dont want to disable imessage totally on my macbook.

    Welcome to the Apple Support Communities
    First of all, check that Messages is closed when you turn off your MacBook. This is so important because, by default, OS X will reopen all opened apps the next time you start your Mac.
    Apart from that, when you go to  > Shut Down, or  > Restart, in the window you see to restart or turn off your MacBook, unmark "Reopen windows when logging back in". This will avoid that your Mac opens all opened apps the next time you start the MacBook, so Messages won't start automatically at startup

  • SAP system doesn't automatically start after restart (but manual start ok)

    Hi,
    We've got a new production line of SAP EP 7.0 systems, which have CI on HP-UX and DIs on windows. The version is NW2004s SPS09.
    What we see is that after a restart of the windows servers (usually because of windows patching), the SAP system doesn't automatically start up. It doesn't start up if I restart the SAP<SID>_<instance> service either. 
    However, I've got no problem starting the system with the MMC.
    Any idea what I am missing here? is it as simple as a profile parameter ?
    As far as I can see the profile used seem ok.
    After a restart of the windows server the following files have log entries in the c:\usr\sap\<SID>\J<instance>\work folder
    sapstartsrv.log
    trc file: "sapstartsrv.log", trc level: 0, release: "700"
    Fri Nov 17 15:51:26 2006
    <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
    sapstart.log
    Starting WebService thread
    SapSSLInit failed => https support disabled
    Webservice named pipe thread started, listening on port
    .\pipe\sapcontrol_97
    Webservice thread started, listening on port 59713
    sapstart.trc
    Starting WebService thread
    SapSSLInit failed => https support disabled
    Webservice named pipe thread started, listening on port
    .\pipe\sapcontrol_97
    Webservice thread started, listening on port 59713
    The windows event log have the application events
    (first)SAP Service SAP<SID>_<instance> successfully started.
    (at the same time)
    Failed to update service environment from user (STATOIL-NET\<sid>adm) environment. [ntservmgr.cpp 201]
    (note that this doesn't happen for all systems which have this problem, for other there is no entry like this)
    I see no failed login attemps in the security event log, but see the that a login is performed for SAPService<SID>.
    Since it also fails to automatically startup when I restart the service, I am able to use filemon to see what happens at a file level. Here I see that it can access the shared file system without any problems, and can read the profile and everything.
    MOM is running on the server and gets some Access denied errors since it doesn't have access to the shared file system, but I don't think that matters.
    Cheers
    Dagfinn

    hi  we are using sap bw 3.5 . database is oracle 9i
    i applied a kernel patch and when i tried to start the services . there was no problem with the oracle services  and saposcol but the service sap<sid>_nr did not start .
    when i went to check the error in work folder ..
    it say " SapSSLinit failed => https support disabled  .
    then i tried to start sap from cmd pmt . din`t work .
    is there a way to statrt this ...
    thanks alot.
    arjun

Maybe you are looking for