Hypev "automatic start action" not retained after live motion

Hi,
We have a hyper-v cluster of 2 windows 2008 R2SP1 nodes.
We found that the settings we made in the VMs "automatic start action" were reset to "none" after migration between the nodes .
We need to have it maintaned
thanks
Stefano

Hi ,
I think there may be something unclear in my previous email. Ok, I will detail it.
If you make a virtual machine high available, the Automatic Start Action will not work after you perform a live migration. Which means the following setting will not be "failovered" to another host.
You should set this via the Cluster Manager by the following setting:
This is what I said:
If you change the configuration of a virtual machine, we recommend that you use the Failover Cluster Manager snap-in to access the virtual machine settings. When you do this, the cluster is updated automatically with the configuration changes. However, if
you make changes to the virtual machine settings from the Hyper-V Manager snap-in, you must update the cluster manually after you make the changes. If the configuration is not refreshed after networking or storage changes are made, a subsequent failover may
not succeed or may succeed but result in the virtual machine being configured incorrectly.
Thanks. Feel free to let me know if anything is unclear.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Hi Aaron ,
yes I think there's a misunderstanding about the question .
When you say
"If you make a virtual machine high available, the Automatic Start Action will not work after you perform a live migration. Which means the following setting will not be "failovered" to another host."
you mean that it is supposed to work this way ?
I mean , If you make a VM HA with clustering is it an accepted behaviour that the setting of " automatic start action " ( not the stop action you posted the picture of ) is not maintaned after a live migration even if such setting is made through the failover
cluster manager ?
If you are telling me that this is what it is supposed to work I don't agree , because I wish I can have a way to set a priority in VM startup in the case of complete shutdown/reboot .
Working with vsphere as well this is possible and I thought it was the same with Hyper-v
To solve this problem I had to create a group policy's startup script for the cluster nodes in which I start the VM in the correct order with some timeout .
Thanks
Stefano Colombo

Similar Messages

  • Automatic Start Actions for a Virtual Machine

    Hi ,
    We configure some VMs on a cluster
    the default setting of automatic Start action is set to Nothing
    when the cluster is down of hyper-v service is stopped  , once the problem is solved , All VM will be run as it was running before the problem happened
    So What is different between the following options of automatic Start action
    Nothing
    Automatically start if it was running when the service is stopped
    And do you know why it is st for standalone Host not for the cluster as per this thread

    FYI - Automatic Start Actions in the settings of a VM are different once the VM is HA under Clustering.  Since the job of Clustering and HA is to keep that VM running.
    If you look here:
    http://technet.microsoft.com/en-us/library/cc732181(v=WS.10).aspx#BKMK_Machine
    You find this:
    Automatic actions let you automatically manage the state of the virtual machine when the Hyper-V Virtual Machine Management service starts or stops. However, when you make a virtual machine highly available, the management of virtual machine state should
    be controlled through the Cluster service. In this step, you reconfigure the automatic start action for the virtual machine.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.
    Disclaimer: Attempting change is of your own free will.

  • AM is not retained after deployed the custom pages

    Hi,
    I have two custom pages, Create(page1) and Select Jobs(page2) pages.
    In Create page I've a button called Populate Jobs, Once I click the populate jobs button it will navigate to another page. In page2 I'll select list of jobs using multiple selection.
    Once multiple jobs selected I'm validating those jobs(lines) already added to the page1 when click submit button (available in page2).
    Both pages have same AM and I'm retaining AM when I move from page1 to page2. In page 2 if click submit button I try to get all the existing lines which is arendered in page 1.
    But i'm getting zero count but records are there. It is working very fine in my machine before deployment. But the AM is not retained after deployed to apps.
    Details:
    OA Extension
    10.1.3 (Build OAEXT_MAIN_NT_100429.1954.1314)
    My Jdev Version
    10.1.3.3.0
    EBS - OA Framework
    12.1.3
    EBS- Oracle OA Extension
    10.1.3 - build 1313
    please suggest me do I need to check any profile option to set AM State or any other solution for this.
    Thanks in advance,
    SAN

    Hi.
    Try adding some debugging statements using write diagnostics .
    Check to see if VO is getting cleared on loading 2nd page.
    Alternate solution would be to add these line id's of the selected lines before forwading.
    On 2nd page, get these Id's and do whatever necessary.

  • Panorama settings are not retained after restart.

    In 4.0, the Panorama settings are not retained after restart. The tabs that make up the Panorama settings are retained after restarting Firefox. Any suggestions?

    App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    * http://kb.mozillazine.org/Session_Restore
    Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed.

  • How to fix "OS X Lion user's custom preferences are not retained after reboots"?

        How to quickly fix "many of user's custom preferences from within OS X Lion 10.7.x and/or MtLion 10.8.x are not retained after Mac reboots and/or log-offs"?

         If many of the user’s custom preferences from within OS X Lion 10.7.x and/or Mountain Lion 10.8.x are not retained on Mac after reboots and/or log-offs, then implement this following QUICK FIX procedure:
    Login to user’s OS X login profile… access & select the Finder pull-down menu Go… next select Library (just user’s Library only available when holding-down the Option key here within OS X Lion + MtLion)… find-select-and move the Preferences folder out from the overall user’s Library to the user’s Desktop area for temporary safe keeping.  Then log-off user and/or reboot Mac… log-in as user, and reset all user’s custom preferences (System Preferences, Dock icons, etc. [OS X system now recreating all user’s login profile preferences]) according to their previous Desktop setup.  Finally reboot after making all new user preferences setting changes… log-in again as user, and check to ensure that all user custom preferences now stays retained.  If all OK, then you may move the corrupted Preferences folder from the user’s Desktop area to the Trash for final deletion.
    *NOTE: Is this above-written QUICK FIX completely acceptable to Apple's OS X Lion + MtLion troubleshooting standards?  So far this solution appears to have fixed a recent iMac user's issues with custom preferences.

  • MP3 song information not retained after iTunes 7.0 - ID3 tags at fault?

    I'm having some strange problems with track information in iTunes. I first noticed it when I tried to copy some mp3's from my Mac to my mobile phone: certain tracks did not retain the song information, like artist, album etc., while others did.
    A similar problem has been discussed in this post:
    http://discussions.apple.com/thread.jspa?messageID=3698498
    However, my problem seems to be a little bit more specific.
    If I look at the music in my library in iTunes, all the track information is there. However, for MP3's encoded after 16th October last year, the "Imported With" field, using Get Info, is shown as "Unknown". Before this date, it is shown as "iTunes v7.0". For all MP3's the ID3 version is v2.2.
    I believe that I must have upgraded to iTunes 7.0.1 around this time, since I have a number of Apple Lossless audio files which have also been imported and don't show this problem.
    The main problem is with the file ID3 tag information (I think). If I select one of the problem tracks, find the original file, open it up in Quicktime and "Get Info", no track/album/artist/composer information is displayed. This is NOT true for 1) MP3's encoded before 16th October 2006 and 2) Apple Lossless files encoded at any time.
    In other words, the track information for songs encoded with iTunes 7.0.1 and later is either encoded in a way that no other application can read, OR is only being stored in the iTunes playlist, NOT the file itself. I can see all the track information for these problem files on my iPod, but NOT my mobile phone (where I have to manually copy them over), even if I drag and drop them directly from iTunes.
    I have this problem with Quicktime, my mobile phone music player and RealPlayer, so I'm assuming it's "system wide". It even occurs if I copy a problem file out of my music folder and onto the the Desktop, then manually add the track to iTunes: all the song information has disappeared.
    I have all my music stored on an external hard disk - 160GB Freecom ToughDrive formatted as HFS+. Previously it was stored on an external disk formatted as FAT32, but copying the files over to the new disk didn't change the problem.
    I considered using the "convert ID3 tags" option to see if it would make a difference, but both the good and bad files are listed as using v2.2. I also don't understand enough about them to feel confident converting them to something different - perhaps to v2.3 or v2.4 - just to see if it makes a difference.
    Any information on how to "recover" the missing information (for anything other than iTunes) would be greatly appreciated!
    MacBook Pro 17" 2.16 GHz 2GB RAM   Mac OS X (10.4.9)   iTunes 7.1.1

    Okay, some more information as I try and track down the source of the problem.
    By using an id3 tag editing program - ID3 Editor - I was able to view the song information for each track, even though all the other music players I had tried would not show it. If I then chose to modify and update the ID3 information, this would somehow modify the tags in such a way that they become readable in all other programs.
    I tried using the "Convert ID3" tags option in iTunes, just on a whim, but without any success. Saving the song information in ID3 Editor doesn't change the version of the ID3 tag - it's still listed as v2.2 in iTunes - but it DOES make it readable in other programs. I also tried the various text conversion options, again without any success.
    This looks to me like a bug in iTunes. While its possible for me to get around it, in an extremely long winded way, I still can't understand why iTunes would be writing ID3 information that other Apple programs cannot read.
    Any suggestions? Should I be posting this question in a different forum perhaps?

  • How do i automatically start the next slide after the video on the prevues slide is finished

    I have slide 1 with a video loop witch tranistion to the next on a click. the next slide (slide2) automaticlly starts plays. I want to know how to start Slide 3 automaticlly after the video on slide 2 is done playing. Slide 3 is also on a loop. and start slide 4 on a click. then repeats......  

    I once had the same problem, but it was worse because the length of the video was more than the maximum delay that could be set (Keynote'08, I do not know if this changed in '09). I was helped by someone of this community. She suggested adding invisible text fields, each having a delay, sequenced one after the other. Together they added up to a sufficient delay to play my video and go to the next slide after that. I hope this information will be of use, if need arises.

  • [SOLVED] Console Font Not Retained After Reboot

    Hi, again.  Happy to report that I successfully installed Arch Linux last night, with no problems whatsoever.  Thanks to those who addressed my concerns.  Still reading up on the package manager, user and group management, etc.
    Anyway, one of the first things I noticed is that the console font gets reset after every reboot.  I need to manually type "setfont Lat2-Terminus16" - which works just fine, except for the annoyance in having to do that each time I boot up.  My /etc/vconsole.conf has the following:
    KEYMAP=us
    FONT=Lat2-Terminus16
    Following the solution described here:
    https://bbs.archlinux.org/viewtopic.php?id=155876
    I added 'consolefont' (without quotes) to the beginning (first item) of the HOOKS line in /etc/mkinitcpio.conf.  Then I rebuilt the initramfs by typing "mkinitcpio -p linux".  Again, no errors during the rebuild.
    I've rebooted several times, but there's no change...  my selected console font is not retained.
    Can anyone point what I'm doing wrong, or offer ideas?  Thanks.
    Last edited by R0b0ty (2013-03-06 16:52:42)

    Have you tried
    If the fonts seems to not change on boot, or change only temporarily, it is most likely that they got reset when graphics driver was initialized and console was switched to framebuffer. To avoid this, load your graphics driver earlier. See for example KMS#Early_KMS_start or other ways to setup your framebuffer before /etc/vconsole.conf gets applied.
    https://wiki.archlinux.org/index.php/Fonts#Examples_2

  • Overridden fields' values not retained after form is saved/reopened

    Hi Everyone,
    Thanks in advance for any help you can provide. I've searched the net, but can't seem to resolve my problem.
    The form itself is somewhat complex. If needed, I can get into the details of how the calculation is done, but may save some time if I just explain the problem:
    I have 3 drop down boxes on my form that are auto-populated based on what is entered in a series of other dropdown boxes. The user is allowed to change the calculated drop downs to another option if they want.
    When the form is saved and reopened, 2 of the 3 drop downs are not retaining the value the user selected if they overrode it. Instead, it's recalculating against the calculation script that's written. Strange thing is that there is 1 of the three drop down retaining it's value perfectly.
    Is there anyway I can save the overridden values, or stop it from recalculating and reverting when the form is saved then reopened? I can't set the fields to disabled/read-only either, in case the user needs to override and save again to something else later.
    Thanks for any help you can provide!!

    Can you email me the document to [email protected] ?

  • Album art not retained after pasting

    No matter how many times I paste the album art into iTunes (in both the display area and in the area provided under get info for the song), it does not retain it. It shows up upon paste, but then it does not stay. Playing the song back in iTunes or on the iPod will then also not show the art. Why won't iTunes hold the pasted art in the song file?

    #1 When using the little bottom left windows to paste artwork make sure it reads "Selected Song"
    #2 Make sure that you have got read & write access to the audio-track you want to alter.

  • Clients Windows automatic update is not working after configured EndPoint 2012

    I have all my client machines to look for Windows update automatically from the internet. After I configured my SCCM 2012 to have EndPoint 2012 Protection and all clients to sync to the SCCM server for new definitions. Now all client machines are
    checking for Windows updates on my SCCM server as well.
    1. How can I have my client machines to still check for Windows update from the internet WHILE synching AV definition from SCCM server?
    THANK YOU FOR ANY HELP.

    I don't believe it's possible to do what you wish. Have a look at the local policy on one of your clients (gpedit.msc).
    Navigate to Computer Configuration > Administrative Templates > Windows Components > Windows Updates > Specify intranet Microsoft update service location
    Does it specify your Primary Site server?
    Endpoint Protection leverages the software update component of ConfigMgr for delivery of definitions. This local Windows Updates policy was created when you configured this component. 
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Automatically start SQL Agent service after SQL Server service fails and starts.

    Hi! 
    I have SQL Server 2008 R2 with two main services - SQL Server and SQL Agent.
    I'll try to describe my situation. It happens very occasionally, but sometimes SQL Server service terminates unexpectedly. It's my log:
    09/13/2013 10:46:21,Service Control Manager,Error,The SQL Server (MSSQLSERVER) service terminated unexpectedly.  It has done this 1 time(s).  The following corrective action will be taken in 120000 milliseconds: Restart the service.
    09/13/2013 10:46:21,,Error,[359] The local host server is not running,,,,
    09/13/2013 10:46:22,MSSQLSERVER,Error,The MSSQLSERVER service terminated unexpectedly.,Server,1073760843,,
    09/13/2013 10:46:22,,Warning,[139] AutoRestart: Attempting to restart the MSSQLSERVER service (attempt #1)...,,,,
    09/13/2013 10:46:27,,Warning,[139] AutoRestart: Attempting to restart the MSSQLSERVER service (attempt #2)...,,,,
    09/13/2013 10:46:32,,Warning,[139] AutoRestart: Attempting to restart the MSSQLSERVER service (attempt #3)...,,,,
    09/13/2013 10:46:32,,Error,[140] AutoRestart: The MSSQLSERVER service could not be restarted after 3 attempts,,,,
    09/13/2013 10:46:32,,Warning,[360] SQLServerAgent initiating shutdown following MSSQLSERVER shutdown,,,,
    As you can see, SQL Server service  terminates unexpectedly. Then SQL Agent service tries to start SQL Server service. After unsuccessfully attempts to start SQL Server service, SQL Agent service stops itself. I have the option setting in SQL Server
    service to start itself after unexpectedly stop within 2 minutes and it is works well. But I have to start my SQL Agent service after this manually. Unfortunately, I can't investigate the reason of my SQL Server stops unexpectedly and in this case I just want
    to make the settings to start both of my services SQL Server and SQL Agent automatically after this.  How can I set up this? How can I make my SQL Agent service starts after SQL Server service?

    Hello,
    SQL server agent service depends on SQL server service so unless SQL server service comes online agent will not come online so agent is depended on SQL server not the other wise.
    Now is your server 2008 R2 patched to latest service pack (SP2).If not please upgrade it to latest SP.Some fixes are there in Sp which will subside this issue.Can you paste output of
    select @@version
    >>Then SQL Agent service tries to start SQL Server service.No this is not the case
    >>Unfortunately, I can't investigate the reason of my SQL Server stops unexpectedly
    Did you checked sql server errorlog and windows event log completely.Please do so and paste if you find some more info
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Automatically start a Managed Sever after a reboot

    I have been tasked with getting some Managed servers to start automatically after reboot, usually when Windows patches are installed. Starting the Managed servers through the GUI works just fine, but I would like for these to start on their own without someone getting involved. The server is Windows 2003 SP2, and the weblogic install should be 8.1.4. Nodemanager is installed as a service on the same server as the Admin servers and the Managed servers. I will try to provide as much info as I can but this is the first time I have worked with weblogic.
    When the server reboots, all services are started and the Admin server is running, but the Managed Server's status is unknown until I manually start it.
    I notice this warning in the Managed server log after the machine reboots and the Managed server status is unknown:
    <Warning> <NodeManager> <QA-WEB01> <ManagedServer1> <Thread-5> <<WLS Kernel>> <> <BEA-300038> <The node manager is unable to monitor this server. Could not create an SSL connection to the node manager. Reason : Connection refused: connect>
    From what I have read about this warning, hostname verification should be turned off. I can confirm that hostname verification is set to none. If anyone could point me in the right direction it would be very much appreciated.

    Hi,
    To overcome this you can create windows services for the managed servers as well.
    Also, a good practice for windows hosts is to implement the graceful shutdown.
    Cheers,
    Vlad
    Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question. If you think this is helpful, please consider giving points

  • Automatic schedule lines not creating after MD03

    HI Gurus,
    When I am running MD03 system is creating Pur. Requisitions instead of Schedule lines
    I am running with
    NETCH
    2
    3
    1
    1
    1
    29102011
    Data maintained
    1.Material master /vendor master Auto po ticked (MRP type VB ROP 500 ,Safety stock 600, current stock 200)
    2.Sch. Agreement created with LP (validity period, Qty ok)
    3.Pur. Info rec maintained for vendor material for the plant.
    4.Source list maintained with Vendor,scheduling agreement no ,item no, MRP indicator 2 Fixed vendor ticked
    Now after Running MD03
    Pur. Req created for 400 qty
    but when I click on Procurement proposal manually I can select Del. Schedule and create
    but system is asking Agreement no. item,qty etc (I already maintained Source list system is asking again )
    Then why not system creating automatically..
    Please help..
    Thanks in advance

    Thanks  Jürgen,
    It was a problem of Date ,validity period of the SA.
    which I sort out any way thank you. for your input

  • Office 2013 (Word, Outlook, Excel, Power point) are not responding after live update

    I had problems all last week with my Office applications not responding. I tried to uninstall and reinstall the software which did not solve the problem. I then did a samsung 5 recovery to factory state and installed office all over again which temporally
    worked. My computer then prompted a windows live update after which the same problem came back with windows application not responding.
    Please help as this is holding up my work.

    Hi,
    Please check your update patch list, if you had installed the Office 2013 SP1. please try to update the display card dirve. See the below thread:
    http://social.technet.microsoft.com/Forums/en-US/34401d63-6c3b-47e6-ab20-9ed9b70d890b/outlook-2013-sp1-unusable-since-sp1-update-?forum=officesetupdep
    Regards,
    George Zhao
    TechNet Community Support

Maybe you are looking for