Automatic update of vendor code during plant to plant Transfer

Hi all,
How to configure automatic update of vendor code during plant to plant Transfer.
Regards
KK

hi,
In transfer posting there is no buying/selling of the goods...there is only transfers may be from plant ot plant...or storage loc to st location...etc...
When you do plant to plant stock transfer, there is no role of the vendor...but the receiving and the destination plant/storage loc plays a big role...
Hope its clear...
Regards
Priyanka.P

Similar Messages

Why is new security update giving error code during download?

Hi All,
I am on 10.8.5 and every time I try to download newest update I am receiving "an error has occurred" message. anyone else have this issue? any fixes?

What are you trying to download? Are you getting an error code?
Try resetting the App Store and Clearing Cookies.
Reset Learned from Old Toad
App Store support. There is troubleshooting and a contact link.
Support

Vendor code in EKKO for STO (Doc UB)

Hi,
I was checking the POs in table EKKO having document type UB i.e. STO within a company code between two plants.
What I have observed is, there is supplying plant which is correct. But for some POs, it is showing plant code (which is my vendor code as a supplying plant) & for some POs it is not.
And this is not for any specific plant. Say for Plant A, it is showing vendor code for one item & not showing for another item.
In which case, vendor code gets updated in table EKKO & in which case , it is not?
Regards,
Piyush

I asked about the order date.
usually UB orders do not need vendors, as it is for intra company transfers only.
however, if your plant starts to do stock transfers (NB) with plants belonging to another company code then a vendor master is needed. And this vendor gets assigned to a plant (in vendor master purchsing data view via menu Extras)
Once this assignment is made, any order will get the vendor number.
Thats why I asked if all orders for the same supplying plant with vendor numbers are younger than the order without vendor number.

Display Vendor Code in FBL3N GL Line Items

I am working on ECC 6 Version. I have observed that in the GL Line Items list ( T code FBL3N) for GR/IR accounts, Vendor Code Field is blank for some of the line items. Mostly the document types involved are RE (MIRO) and WE (Goods Receipt) where vendor code field is blank in the GR/IR Account line item list.
Is there any way that I could update the Vendor Code in all the line lines displayed in the GL Line Items list (FBL3N).
Thank you for the reply.
Gemini

Hi Gemeni,
GO TO FIBF - SETTINGS > PRODUCTS > CUSTOMER
ASSIGN NEW PRODUCT AS ZOFF..OFFSETTING ACCOUNT DETERMINATION
AND ACTIVE THE PRODUCT
COME BACK
SETTINGS > P/S MODULE > CUSTOMER >
EVENT : 00001650............USE FM.......LINE_ITEMS_GET_GKONT
SAVE.....
GO TO GR IR ACCOUNT IN FBL3N AND CHANGE LAYOUT ASSIGN OFFSETTING ACCOUNT
YOU CAN GET OFFSETTING ACCOUNT NUMBER AS VENDOR IN FBL3N
NO NEED ABAP DEVELOPMENT
Rgds
SumaMani

Build number Automatic update.

I need to automatically update build number/code version when each build is performed.
I am primarly looking for Ant support.
If you have good ideas / articles please do fwd me .
Renjith.

if only there was a buildnumber task in ant. Alas.....You'd think they'd have written something like that as a core task, and described it in the freely accessible Ant documentation for Core Tasks....

VAT GL or withhold tax GL text (SGTXT) will be update by Vendor name automatically during posting data

Hi,
When i will execute T.code FB60 for vendor AP generate purpose then VAT GL or Withhold tax GL text (SGTXT) will be update by Vendor name automatically. Anybody there , who can help me?
Best Regards,
Tariq Russel.

Hi Tariq
We had the same requirement and we achieved through Substitution at Complete Doc level using User Exit
You can also achieve through BTE 1120
Br. Ajay M

Automatic VAT code during fixed asset PO creation

Hi all,
We have a classic AUC acquisition process : through MM with IO allocation.
My question is = is it possible to automatically affect one VAT code relating to fixed asset acquisition during purchase order creation? (and not VAT relating to goods and services acquisition, we have to distinguish both with french rules).
The person in charge of PO creation don't have to choice between VAT codes, this is the reason why VAT code has to be affected automatically.
Thanks in advance for your answer.
Best Regards

Hi Ocean,
if you use as91 you have to enter as followed:
***.acquis.val.     120.242,00 <- enter
***.down paymts
***.reval.of RV
***.invst.grant
Accm.ord.deprec     70.809,18 <- enter
***.Spec.dep.
***.unplnd.dep.
***.reserves
***.reval.O.dep
Net book value     49.432,82 <- calculated automatically
***. interest
Reval. posted
Ord.dep.posted     3.340,06 <- enter
Pstd.spec.dep.
Pstd.unpl.dep.     0,00
Res.posted
Of course SAP reverses the amount because it is entered as ord dep. posted (this means current fiscal year!!!) insted of accm. ord. depr. (depr. up to 31.12.2007)
The ***. depreciation up to 31.12.2007 has to be enterend in ACCM. ord. deprec.
The *** and posted depreciation from the current year has to entered in ORD.DEP.Posted, pls. have a look at my calculation.
How to correct the fields Ord.-dep. posted and Accm ord. dep? This depends on many parameters:
Have you carried out the datantransfer already in the P-System????
Any other postings for SAP AM already carried out
How many assets have to be changed.
You can reset the Companycode in AM (only recommendable if deprun is not posted and no other postings - retirements, aquisitions transfers have been entered). Then start a new upload
Even lsmw and a BI-recording as92 with the last screen could be a solution.
At least if you have only a few assets - correct them manually - it's not worth the effort to create a BIR and a LSMW - the user is faster.
Best regards
   Horst

IE 11 is not blocked during Automatic Update step.

Greetings.
I am experiencing something very strange with our Windows Deployment Servers.
I have WDS 2013 with AIK-8.1 combination server to do our machine deployment. Some of our machines need to have IE11 blocked from installation (for compatability issue). As in case with IE10 before we installed blocker from microsoft and then captured image.
Before capturing it it was tested by runnign auto update and ie 11 is not being installed.
Problem is during deployment during automatic update step (post application) the system picks up and installs ie11.
If I remove it by hand after installation is over and run windows update - it's not installed. If I disable auto-update step in installation - and run them by hand after - it's not installed.
Does anyone else experienced this scenario when blocker doesn't seem to have effect?

Hi,
According to FAQ here:
Internet Explorer 11 Blocker Toolkit: Frequently Asked Questions
http://technet.microsoft.com/en-us/ie/dn449234.aspx
What registry key is being used to disable delivery of Internet Explorer 10?
HKLM\SOFTWARE\Microsoft\Internet Explorer\Setup\10.0
When the installation is over and about to updating, cancel the update and check the registry key.
A value of 1 turns off the automatic delivery
of Internet Explorer 11 using Automatic Updates and turns off the Express install option.
Not providing a registry key, or using a value of anything other than 1,
lets the user install Internet Explorer 11 through Automatic Updates or a manual update.

Automatic vendor creation during BP creation

Hi Experts,
**Please any one of you give me a solution for this **
Automatic vendor creation during BP creation
Thanks & Regards,
Srikanth.M

Hi Experts,
**Please any one of you give me a solution for this **
Automatic vendor creation during BP creation
Thanks & Regards,
Srikanth.M

Power failure during automatic update installation

I had a power failure during the installation of automatic updates. since then Safari will not open, it flashes up on screen then crashes. how can I reinstall the updates? update show as having been successfully installed and I cant see a way of reinstalling them to try to fix the problem.
I have done a disk check and it found no problems

brocko wrote:
Welcome to Apple Discussions:
Help. I was in the middle of loading a system update when I shut the power off.
You mean you forced the computer off with the power button?
When you say the middle of loading a system update, what do you mean? Downloading it, installing it??
Now my MacBook Pro does not boot and only has an error message when I power up. I have read some forum topics on downloading a stand alone installer to fix and another on using my leopard install disk\utilities to "restore from time machine".
You need to boot into the Leopard DVD by inserting the DVD, rebooting and holding down the "C" key. After the language screen, in the menu, top left, under Utilities, run disk utility and repair HD and permissions.
That's the first step.
If that does not work, boot into the safe mode by holding down the shift key on boot. If you get to the login screen, you are probably in good shape - just click restart and let the system reboot normally.

Need to capture Vendor code & Service Order no during Goods Issue

We have a typical req of tracking Goods issued to contractors to whom Service Orders ( Labour jobs ) is awarded. Even though contract is pure labour type , we intend to track materials issued against work orders.Std transaction of Goods issue to Purchase order can not be done here as materials are already lying in stocks but when issue to Contractor who is working in our premises , we need to track Goods issue against Work Order no in SAP as well as Vendor code , If these things get captured , we will customise the report.
Umesh Bagul

Hi,
You can make Goods issue from MIGO with Movement Type-261.
Capture the details as follows
MIGO -> Goods Issue > Other > 261
Maintain Work Order Number in Material Slip
And the maintain Vendor code in Partner Details ,you can find this tab under Item detail field.Field name -Vendor Code
THen there is no need to make seprate Z report.
You can find all these details through MB51.
Regards,
Sandesh Sawant

Automatic replication of vendor masters from SAP R/3 to EBP

Hi
For this issue I found the below program and steps to do the automatic replication of vendor master from SAP R/3 to EBP
PROGRAM BBP_VENDOR_SYNC
The program BBP_VENDOR_SYNC automatically synchronizes the backend vendors with the SRM system.
To run the program BBP_VENDOR_SYNC, you first have to make the following settings:
Path in the Implementation Guide (IMG):
Supplier Relationship Management --> SRM Server -->Technical Basic Settings -->Settings for Vendor Synchronization --> Make Global Settings
Supplier Relationship Management --> SRM Server -->Technical Basic Settings -->Settings for Vendor Synchronization --> Define Settings for Each Backend System
Then you have to make the following settings in transaction SA38:
· Enter program BBP_VENDOR_SYNC.
· Click on the pushbutton Background.
· Enter the report name BBP_VENDOR_SYNC.
· Either define a new variant or use an existing variant ( The new Variant as Test Vendor)
· Click on the pushbutton Schedule.
· Enter the job.
· Define the start date.
· Either schedule once or schedule periodically. Then you have to define the period interval.
I followed the above mention steps and I am able to setup the Schedule on timely basis and the job was completed successfully, but the vendors are not replicated successfully .
I am receiving the below error in transaction code SLG1.
1.The Specified Node does not Exist in the Org. Plan(Message no. BBP_VENR006).
2.No Vendor Replicated from Backend MD1CLNT(Message no. BBP_VENR017).
Please check and advice.
Thanks & Regards
Sada

Hi Sadasivam,
Make Global Settings
Use
In Customizing for vendor synchronization, you define between which mySAP or ERP backend systems and the EBP System you wish to automatically synchronize the vendor master data. This setting is necessary in order to start a job-based execution of the synchronization, so that the vendor master data that is newly created or changed in the backend is updated regularly in the EBP System.
Requirements
You wish to use the automatic vendor synchronization functionality.
In the Implementation Guide (IMG) activity Define RFC Destinations, you have defined the RFC destinations for your systems.
Under Define Backend Systems, you have defined the backend systems for your systems.
Activities
Customizing for Vendor Synchronization consists of two parts. In the first part you make those settings that are valid for all backend systems. In the activity Make Settings for Each Backend System you can define or display detail data for the individual backend systems.
Make Global Settings
By setting the indicator Create New Vendors Also, you can determine that those vendors newly created in the backend systems are also newly created during the synchronization. If this indicator is not set, the only data updated is that of the vendors in the Enterprise Buyer System whose data was changed in the backend systems.
Note:
If you have not yet made an entry here, an empty screen appears when you start the activity. To make the settings, choose New entries or press F5.
Further Settings:
Carry Out Address Check for Duplicates :
Organizational Unit in EBP for the Vendor
Enter the eight-digit number, for example, 50001234.
Vendor Number Assignment Type
In the dropdown box, choose the method with which the number is to be allocated when a new vendor is created, for example, internal number allocation.
Hope this makes you more clear. My mail i.d is [email protected]
Rgds,
Teja

Update error in RV_SALES_DOCUMENT_ADD during Sales order creation

I get an Update/ ABAP runtime error during Sales order creation. The error occurs during processing of the update module -RV_SALES_DOCUMENT_ADD.
This error does not occuring always, as I am sometimes able to create a Sales order without getting update error. I am getting the error of all types of Sales orders and even contracts.
Am I missing any configuration parameters?
Thanks,
Chitra

Yes , I can see the error in ST22.
While exceuting VA01 (Oder type OR, Entering Sold-to-party, Purchase order NO, Material, Qty, Plant),
- I get run-time error "Run-time error "GETWA_NOT_ASSIGNED" occurred".
    Analysis of error shows:
     Update terminated in "Update module: RV_SALES_DOCUMENT_ADD"
      Fails in the Read table in one of the form
        Termination occurred in the ABAP program "SAPLV45U" - in "VBAP_BEARBEITEN"
The main program was "RSM13000 ". In the source code you have the termination point in
line 147 (READ TABLE FYVBAP WITH KEY VBAP_KEY.)
of the (Include) program "LV45UF0V".
The ABAP's say the functional module is trying to do an 'UPDATE' instead of 'INSERT" in the internal table FYVBAP.
Thanks,
Csuman

Text field update with Vendor Account using APP F110

Hi,
If we want to populate vendor code and vendor name in text field of each payment line item while executing Automatic Payment Program, is it possible?
What configuration changes needs to be done?
I have tried the Substitution at the Complete Document Level but the system is not updating the doc.

Hi
transaction GGb1
New entries - Company code, Line item, Enter a Name
Environment - Substitution - Create yes
Select your substitution name - Select create step on top
Select 'Field assignment' - Text field
Prerequisite - Transaction code = Constant "F110"
Substitution - Text = LIFNR
Activation of subtitution is done in making the Acctivation = 1 and Call up point = 2.
Note : In the Payment Document the Bank account line items is showing Auto. created

Text field getting updated with Vendor account

Hi,
If we want to populate vendor code and vendor name in text field of each payment line item while executing Automatic Payment Program, is it possible?
What configuration changes needs to be done?
I have tried the Substitution at the Complete Document Level but the system is not updating the doc.

hi
in the substitution you have to build your logic

Automatic update of vendor code during plant to plant Transfer

Similar Messages

Maybe you are looking for