Automatically add guides to guide layer
Hi, is there a way to make any guides I create automatically go into a guide layer? the main reason for this is that I always forget to highlight the guides layer when drawing guides and it's also extra clicking, and I end up with loads of guides clogging up the other layers. And I'd have thought that the program could easily deal with it. Failing that, is there a way to select all the guides so I can move them all in one go?
Cheers,
Jarrick
> is there a way to make any guides I create automatically go into a guide layer?
No.
> is there a way to select all the guides so I can move them all in one go?
Select one guide, then Select > Same Stroke Color, then switch to your guides layer and paste (making sure "Paste Remembers Layers" is not checked in the Layers palette).
Similar Messages
-
Guide layer stops working when I change a movieClip
Hey all,
So I have a few things moving along a common guide layer.
There are 7 objects, and depending on what is happening on screen,
i want to have some of the objects appear and disappear. I have all
of the objects _alpha set to 0, but when something triggers it, I
change a few of them to _alpha=100. The problem is that, at that
point, they stop moving along the guide. I know they move because
they will be halfway across the screen, but then stop moving
immediately after I call the change in _alpha. Any ideas? Can you
not change the properties of a movieClip while it is moving on the
guide? Thanks...Be sure to change the symbol to a button in both the library and in the properties panel. If you only change it in the properties panel, the tmeline will not change.
-
I have a layer used only for audio. For testing purposes, I
wanted to speed up publishing by omitting the audio layer. I simply
turned it into a guide layer. Flash isn't suppose to export content
on guide layers, but yet Flash is still publishes the audio layer.
Why isn't audio being excluded from my published file?Are you using CS3? If so simply turn off the visibility of
the layer. This is a new CS3 feature
(located in Publish settings).
No longer do we have to convert layers to Guide layers to
omit them from publish.
Chris Georgenes
Adobe Community Expert
www.mudbubble.com
www.keyframer.com
www.howtocheatinflash.com
pwmiller wrote:
> I have a layer used only for audio. For testing
purposes, I wanted to speed up
> publishing by omitting the audio layer. I simply turned
it into a guide layer.
> Flash isn't suppose to export content on guide layers,
but it still publishes
> my audio.
>
> Why isn't audio get excluded from my published file?
> -
Adding vector mask as guide layer?
I have a template that uses a vector mask as one of the layers to line up images. What I need to do is have the vector mask serve as a guide layer so when I go to export it does not appear on export. Is this possible?
No its not. You can Action or script a deleting of your "Guide" layer before you export or Save the file. Probably your best option
-
Rectangles can't be moved from guides layer
Using Illustrator CS5 on Mac: When I draw a rectangle it shows up on the guides layer. When I try to move it to the foreground layer it reverts, without warning, back to the guides layer. I need the rectangle to be used as a clipping mask, so it has to be on the foreground (artwork) layer.
Thanks for any help.There's a smell of cheesy Freefoot in the air, f***h***dave :-) *
Scott's right, there ain't no guide layer in Illie.
Never has been, hopefully never will be, although it can occasionally be handy to make one.
I think you must be accidentally hitting a key combination that converts paths to guides.
Illie's default for doing that is Cmd+5.
The default keystroke for Object > Arrange > Bring to Front is Cmd+Shift+]. Is ] somewhere near 5 on your keyboard?
Maybe you should take a look at Edit > Keyboard Shortcuts.
* F***h*** is a bit like Shakespeare's Scottish Play, not to be named in the theatre. -
Should I automatically add 'x86_64' to my PKGBUILDs?
Hi,
i got a question: Should i automatically add x86_64 to my PKGBUILDs or not? I'm only running 32bit.
My default behaviour always was to not add it and wait until somebody sends me a comment like "hi, it's running fine on x86_64, please add..." or "hi, you need to blablabla to get this running on x86_64" and then i would normally drop the package with a comment that i'm unable to maintain 64bit packages.
Now, recently i got a comment for one of my packages like "hi, fix your shit, x86_64 is so common these day".
So what's your opinion/Is there a default policy that i've overlooked? Should i stick to my old behaviour not adding x86_64 by default at the risk of annoying users and making things more complicated (comment ping-pong) or should i just add it and assume it'll be okay? Is there any guide/article which mentions potential problems with building 64bit packages, so that i can asses if there might occur problems or not?@Masuto
I am one of the people who asked you to add x86_64 to pkgbuilds, more specifically - petri-foo && ebumeter - which both compile fine and work on x86_64. Which is exactly the reason i asked you to add x86_64. ie: i use both of those packages, almost daily on my 64bit system and didn't ask you to add x86_64 without first making sure they worked okay. Also, even if their was a (later) problem of x86_64 version not compiling - the problem would be reported upstream to the developer, as a problem like that should be reported upstream, rather than expecting the packager to have to fix the developers the code.
I'd also like to point something out here; I did not make any demands, nor did i say this;
masuto wrote:hi, fix your shit, x86_64 is so common these day
Now here is actually what i said;
triplesquarednine wrote:
*please* fix your pkgbuild;
==> ERROR: ebumeter is not available for the 'x86_64' architecture.
Note that many packages may need a line added to their PKGBUILD
such as arch=('x86_64').
64bit CPUs are pretty much standard these days, so you should have x86_64 specified in there.
cheerz
I see a big difference in your interpretation of what i said vs. what was actually said;
I politely asked you to fix your pkgbuild and 'cheerz' also indicates a salute / thanks / gratitude / appreciation...
Maybe i am wrong to assume you 'should' have x86_64, using the reasoning that 64bit CPUs dominate the market and are quite common place ~ but when both packages are working fine for 64bit and only require adding x86_64 to the arch=() in order for x86_64 users to use them - i can't imagine any reason to not add them.
do we really need to have separate x86_64 pkgbuilds/AUR for either of those packages?
food for thought.
Last edited by triplesquarednine (2012-07-18 18:03:22) -
Based on wich file information does iTunes sort music in "Automatically add to iTunes" folder?
Hey I have some files ( here 3 for example).
I put them into the "Automatically add to iTunes" Folder.
After that iTunes sorts them without any problem.
But based on which information does iTunes sort them?
I looked into the details of the file but i cannot find the structure.
Look at your self:
File:
M:\Music\Media\Music\Phil Collins\Hits\07 Against All Odds.mp3
StartTag : TagLib.NonContainer.StartTag
EndTag : TagLib.NonContainer.EndTag
TagTypes : Id3v1, Id3v2
Tags : {, }
Title : Against All Odds
Performers : {Phil Collins}
PerformersSort : {}
AlbumArtistsSort : {}
AlbumArtists : {Phil Collins}
Composers : {Phil Collins}
ComposersSort : {}
TitleSort :
AlbumSort :
Album : Hits
Comment :
Genres : {Adult Contemporary}
Year : 1984
Track : 7
TrackCount : 0
Disc : 1
DiscCount : 1
Lyrics :
Grouping :
BeatsPerMinute : 121
Conductor :
Copyright :
MusicBrainzArtistId :
MusicBrainzReleaseId :
MusicBrainzReleaseArtistId :
MusicBrainzTrackId :
MusicBrainzDiscId :
MusicIpId :
AmazonId :
MusicBrainzReleaseStatus :
MusicBrainzReleaseType :
MusicBrainzReleaseCountry :
Pictures : {}
IsEmpty : False
Artists : {Phil Collins}
FirstArtist : Phil Collins
FirstAlbumArtist : Phil Collins
FirstAlbumArtistSort :
FirstPerformer : Phil Collins
FirstPerformerSort :
FirstComposerSort :
FirstComposer : Phil Collins
FirstGenre : Adult Contemporary
JoinedArtists : Phil Collins
JoinedAlbumArtists : Phil Collins
JoinedPerformers : Phil Collins
JoinedPerformersSort :
JoinedComposers : Phil Collins
JoinedGenres : Adult Contemporary
File2:
M:\Music\Media\Music\Compilations\Das Dschungelbuch - Deutscher Original F\06 Ich Wäre Gern Wie Du.mp3
StartTag : TagLib.NonContainer.StartTag
EndTag : TagLib.NonContainer.EndTag
TagTypes : Id3v1, Id3v2
Tags : {, }
Title : Ich Wäre Gern Wie Du
Performers : {Disney}
PerformersSort : {}
AlbumArtistsSort : {}
AlbumArtists : {Disney}
Composers : {R. M. Sherman}
ComposersSort : {}
TitleSort :
AlbumSort :
Album : Das Dschungelbuch - Deutscher Original Film-Soundtrack
Comment :
Genres : {Film-musik}
Year : 2007
Track : 6
TrackCount : 0
Disc : 1
DiscCount : 1
Lyrics :
Grouping :
BeatsPerMinute : 0
Conductor :
Copyright :
MusicBrainzArtistId :
MusicBrainzReleaseId :
MusicBrainzReleaseArtistId :
MusicBrainzTrackId :
MusicBrainzDiscId :
MusicIpId :
AmazonId :
MusicBrainzReleaseStatus :
MusicBrainzReleaseType :
MusicBrainzReleaseCountry :
Pictures : {}
IsEmpty : False
Artists : {Disney}
FirstArtist : Disney
FirstAlbumArtist : Disney
FirstAlbumArtistSort :
FirstPerformer : Disney
FirstPerformerSort :
FirstComposerSort :
FirstComposer : R. M. Sherman
FirstGenre : Film-musik
JoinedArtists : Disney
JoinedAlbumArtists : Disney
JoinedPerformers : Disney
JoinedPerformersSort :
JoinedComposers : R. M. Sherman
JoinedGenres : Film-musik
File3:
M:\Music\Media\Music\Compilations\Album\9999 Title.mp3
StartTag : TagLib.NonContainer.StartTag
EndTag : TagLib.NonContainer.EndTag
TagTypes : Id3v1, Id3v2
Tags : {, }
Title : Title
Performers : {Contributing artists}
PerformersSort : {}
AlbumArtistsSort : {}
AlbumArtists : {Album artist}
Composers : {Composers}
ComposersSort : {}
TitleSort :
AlbumSort :
Album : Album
Comment : Comments
Genres : {Genre}
Year : 2013
Track : 9999
TrackCount : 0
Disc : 0
DiscCount : 0
Lyrics :
Grouping : Group description
BeatsPerMinute : 1111
Conductor : Conductors
Copyright :
MusicBrainzArtistId :
MusicBrainzReleaseId :
MusicBrainzReleaseArtistId :
MusicBrainzTrackId :
MusicBrainzDiscId :
MusicIpId :
AmazonId :
MusicBrainzReleaseStatus :
MusicBrainzReleaseType :
MusicBrainzReleaseCountry :
Pictures : {}
IsEmpty : False
Artists : {Contributing artists}
FirstArtist : Contributing artists
FirstAlbumArtist : Album artist
FirstAlbumArtistSort :
FirstPerformer : Contributing artists
FirstPerformerSort :
FirstComposerSort :
FirstComposer : Composers
FirstGenre : Genre
JoinedArtists : Contributing artists
JoinedAlbumArtists : Album artist
JoinedPerformers : Contributing artists
JoinedPerformersSort :
JoinedComposers : Composers
JoinedGenres : Genre
Thank you for your help in advance.
Mk-maddinPast experience suggests that iTunes doesn't handle files with multiple tags well. I've not worked out which tag gets read when there are multiple tags but I've seen cases where iTunes can update one while reading back unchanged data fom the other.
At the file level iTunes will organize the files first by Album Artist, or if blank, Artist, or if blank use Unknown Artist. If the tracks have the custom iTunes property Part of a Compilation = True then they get stored in the Compilations folder instead of under their artist.
The next layer of folders is based on Album title or Unknown Album if none given.
FIles are stored in the format [[<Disc> ]## ]<Name>.<Ext> where leading disc numbers are omitted if the the disc no. reads 1 of 1 or 1 of <Blank>.
Tracks with the same Album Artist or Artist and the same Album title should be grouped together in iTunes as albums.
Within the iTunes interface sorting is based on the first non-empty value from Sort Album Artist > Album Artist > Sort Artist > Artist and Sort Album > Album.
See Grouping tracks into albums for more info.
tt2 -
Automatically adds a vector mask
It automatically adds a vector mask whenever I use one of the two bottom tools in this image. http://sixpop.com/images/file/56049748.jpg how do I stop it from adding vector masks?
No.
You're creating a "Shape Layer" with your Pen Tool.
Look at the group of 3 buttons near the left side of your Options Bar.
Hover over each of them until the little Tool Tip appears.
Experiment to see how each one affects what happens when you use the Pen Tool or create a Custom Shape. -
Automatically add clear frames between keyframes?
I have several movie symbols with a different bitmap in each keyframe. Since they move too fast to match the other symbols, I want to put clear frames between each keyframe. So far I have just been clicking each keyframe and hitting F5 several times but I thought there might be a better option.
Is there a way to automatically add a number of frames between each keyframe?
ThanksI think the OP doesn't mean empty keyframes (s)he just means to add frames. On my machine, at least, F5 just adds more frames, not an empty keyframe. So the flickering shouldn't be a concern here....
If you are just getting into code tweening I would suggest looking into the TweenLite/Max classes from Green Sock instead of the built in ones.
And Ned is correct, JSFL can automate many mundane tasks that you might perform in the authoring environment. I've only dabbled with it a bit, but it could easily do what you are asking. There might even already be some script out there that adds a certain number for frames at each keyframe in a layer or a timeline or some such. -
Is there a way to automatically add another of the same page while a form is being filled?
Is there a way to automatically add another of the same page while a form is being filled?
I have a two-page form of which the second page is essentially a spreadsheet analog. Often, there is need for for more lines than are available on the page. Is there a way in which to add another or even multiple copies of the second page?
Thanks ahead...
TGYou can do that with a dynamic XFA form created in LiveCycle Designer, which comes with Acrobat Pro for Windows. For more information, you can ask over at the LiveCycle Designer forum.
-
How can I bypass Automatically Add to iTunes?
I have a large CD collection (>3000) that I've ripped to iTunes in ALAC format; I only listen to CD or better quality music, so I don't have any mp3 or AAC files in my iTunes library. I keep my music on an external hard drive. I recently bought a larger external hard drive and moved all of my music to that drive. For some reason, iTunes chose to put all of my music in a folder called "Automatically Add to iTunes". This was fine, except that I could no longer see the contents of the hard drive; however, I did know that the files were there, becasue of the disc space that they consumed.
Today, I ripped two new CDs to the hard drive through iTunes and I noticed that iTunes placed the music folders for those CDs outside of the "Automatically Add to iTunes". I decded to drag the new folders into the "Automatically Add to iTunes" folder. When I did so, all of the previous music disappeared and I cannot recover it. Fortunately, I have a copy of Sentuni, so I'll be able to put the music back on the hard drive from my iPods, but this process will require several hours. In addition, ripping my CD collection to iTunes required a lot of time, so I'm not pleased with the "Automatically Add to iTunes" folder feature. Is there a way to disable this feature, so that I can simply put my music on my external drive and be able to see that the folders are there.
I've been a devoted Apple customer for almost a decade, so I won't get too upset over this issue, but I wish that your developers would have addressed this issue during the development stage. Thanks for your attention to this problem.
Best,
HeathHeath Watts wrote:
If only this were the case. I tried to move several albums into the "Automatically add to iTunes" folder, which resulted in thousands of albums being erased from the folder. One should be able to drag a music folder into the "Automatically add to iTunes" folder without iTunes erasing the original contents of the folder.
It didn't erase anything.
It automatically added them to iTUnes and moved them to the correct folder (Movies, Music, etc.) in the location shown in iTunes prefs > Advanced - iTunes media folder location.
I would like to disable the "Automatically add to iTunes" feature in iTunes,
You "disable" it by not putting anything into it. If you don't want to use it, don't use it.
If you want to manually manage, do not put anything into this folder.
Go to iTunes prefs > Advanced and uncheck Copy files to iTunes media folder when adding to library.
Then File > Add to library adn select what you want to add to iTunes. Do NOT put anything into the Automatically add to iTunes folder
and would like to be able to see the albums and artists on my external hard drive without having to do Spotlight searches
You wouldn't have to do Spotlight searches anyway.
The files are in /Music/Artist/Album folderin the location shown in iTunes prefs > Advanced - iTunes media folder location.
Also, in iTunes, you can select a song, right click - Show in Finder. -
Is there a way to automatically add text to video; the text gleaned from order data?
is there a way to automatically add text to video; the text gleaned from order data?
What is "order data"?
-
Automatically add a current date at the end of the comments
Hi,
I have a form on a table with 5 fields... on one the field I am asking my users to enter comments...
I am looking for a functionality to automatically add a current date at the end of the comments, only when they are updated or newly filled in...
Please advice how can I do it... I am anticipating some sort of a trigger on column (when the data is modified)...
Thanksautomatically add a current date at the end of the comments, only when they are updated or newly filled inDo you want to add the date to the page item itself and hence show it to the end user as and when its changed, thn
Assuming comments item is named '*P1_COMMENTS* , add the following to the "execute on load"
$('P1_COMMENTS').change( function(){
var d = new Date();
$s('P1_COMMENTS', $v('P1_COMMENTS')+ d.toUTCString() );
});If its to be done only when updating ie in the PLSQL block
UPDATE <table name>
SET <comments _column> = ( SELECT DECODE( NVL(<comments _column>,'')
,NVL(:P1_COMMENTS,'')
,<comments _column>
,:P1_COMMENTS||TOCHAR(SYSDATE,'DD-MON-YYY')
FROM DUAL
WHERE <condition> -
UIX 2.1.21: Date OnBlurValidator automatically add current month or year?
Would be nice if the OnBlurValidator for a UIX Date field could automatically add a missing month or year.
e.g. Format dd.mm.yyyy
When the user enters 01.01. the current year could be added automatically.
Or when the users only enters 01. the current month and year could be added.
Would be a nice feature additionally to the already existing lenient-date-formats = true.
Really great would be to allow entering values like "now" / ".", "yesterday" / "-" or "tomorrow" / "+" that are evaluated to the according dates (of course internationalized).
Thanks, Markushey mill1640,
Did you ever get your iPhone to register with iTunes? I just upgraded as well to Snow Leopard, and my my isn't recognized at all also.
If you did get this resolved, I would appreciate a little suggestion in the right direction.
Many thanks,
Josh -
I love the feature in Outlook that lets me flag a message for follow-up and automatically adds a default reminder at the end of the day. Is this something I can configure my Blackberry 9900 to do (running 7.1)?
As far as I can tell, when I flag something for follow-up, it adds a flag but does NOT add any reminder alerts. If I want to do that, I then need to manually add the reminder and set it (which is a little cumbersome).I guess timed message is on the wish list
However in all my forms I use following scenario to validate all data entry at one time and then submit...
I use regular button and add code in Click event
JS example.....
var errorFlag = 0;
var errorMsg = "";
if (validation expression 1) {
//true/pass
//no need to change following values
errorFlag = errorFlag;
errorMsg = errorMsg;
}else {
//false/fail
//set the flag and message accordingly
errorFlag = errorFlag + 1;
errorMsg = errorMsg + "validation message1" + "\n"; //\n for new line with in the message
if (validation expression 2) {
//true/pass
//no need to change following values
errorFlag = errorFlag;
errorMsg = errorMsg;
}else {
//false/fail
//set the flag and message accordingly
errorFlag = errorFlag + 1;
errorMsg = errorMsg + "validation message2" + "\n"; //\n for new line with in the message
//finally
if (errorFlag > 0) {
//>0 indicates there are one or more errors
xfa.host.message(""+errorMsg);//display all messages at one time
exit; //now since there are validation errors you can stop processing further and exit the event
//add submit code......here....
Maybe you are looking for
-
Here is the breakdown. I just bought my wife a new iPhone 4s and I'm trying to decide how to set it up for her. Should she have her own Apple ID or use mine? If she uses my Apple ID, will that cause issues with iMessage - say when I'm chatting wit
-
Windows 8 does not recognise photosmart 5510
Cannot use my HP Photosmart since installing Windows 8. Printer does not recognise my pc. This question was solved. View Solution.
-
When trying to open a task in a project I am getting an error that states "The program can't start because ATL100.dll is missing from your computer. Try reinstalling the program to fix this problem"
-
Can't seem to erase background
This has got to be SO easy but even following the Help instructions isn't working. I have a photo of a tractor trailer on a totally white background. I want to make the white background transparent so just the truck shows when I place it in InDesig
-
NoValues-Kanäle automatisch erkennen und löschen
Hallo, ich suche eine Möglichkeit, Kanäle in einer Messdatei zu finden, die ausschließlich aus NoValues bestehen um diese dann zu entfernen. Gibt es da eine schnelle Möglichkeit? Gruß Solved! Go to Solution.