Automatically connect to Wireless

I have a network profile setup in ReadyCom 4.0 for my home wireless network, however everytime I reboot, I must go into the ReadyCom software and choose to connect using the profile.  What is the easiest way of making my ideapad always connect to my home wireless network automatically after startup.  I'm running Vista Home Premium.

Easiest way is uninstalling readycomm and using Vista built-in WiFi network manager.
//help will save the world

Similar Messages

  • Macbook no longer automatically connects to wireless

    Hi There - I have a macbook (That I love). Just in the past few weeks since the last OS update I've had problems with my airport. Usually when you open your computer from sleep it automatically connects back to your wireless network. Mine no longer does. i have checked all my wireless settings and my WEP password is still there. If I click on airport and select my network I connect, but it doesn't do it automatically. I have seen a number of other people with the same problem....is anyone else having this issue? How do you solve it?
    Here's some other references I found:
    http://forums.macosxhints.com/showthread.php?t=61850
    http://macosx.com/forums/mac-os-x-system-mac-software/281192-mac-will-not-automa ticcaly-connect-wireless-network.html
    possible solution: http://discussions.apple.com/thread.jspa?messageID=3240817&#3240817
    Macbook   Mac OS X (10.4.8)  

    I am having the same issue here. I have followed the suggested fixes, to no avail. Here's a run down of my symptoms, attempted fixes, and the "fix."
    when coming out of sleep, my wireless connection no longer works. i can connect to a neighbors, but when i attempt to switch back to mine, nada. airport status shows it is connected with full reception. no internet. no network connect. i got nada.
    rebooted the router. nada. rebooted the cable modem. nada. rebooted modem, then the router. nada. (d-link DI-624. also had the Linksys WRTXXX)
    attempted this fix: http://docs.info.apple.com/article.html?artnum=304482 nada
    in order to establish a connection, i go through the following:
    - when the macbook comes out of sleep, i open safari and get the network diagnostic screen prompt.
    - i turn off airport, shut down safari, then turn airport back on.
    - reopen safari and get the network diagnostic prompt.
    - go get a cup of coffee, nature break, etc.
    - come back and my internet start up page is USUALLY waiting on me.
    the problem with this, is that the connection is usually DROPPED five to ten minutes into the connection and everything above is REPEATED.
    my solution? as much as i hate to say it, use the PC. it doesn't have this problem. Apple needs to address this issue with a firmware upgrade NOW.
    MacBook 2GHz Core Duo Mac OS X (10.4.8)
    MacBook 2 GHz Core Duo Mac OS X (10.4.8)
    MacBook 2 GHz Core Duo Mac OS X (10.4.8)

  • T60 does not automatically connect to wireless profile at bootup any more

    Probably my rose-colored-glasses mistake again. 
    I let the ThinkVantage system updater install most of the latest updates last night including the
    wireless adapter software.  Now, when I boot up, my PC no longer automatically connects to
    my wireless profile.  The radio is on and it is obvious it knows the network is there because it
    is highlighted in the Access Connections menu with a Connect option.
    It connects just fine when click Connect. 
    It will still automatically switch between ethernet and wireless when I plug and unplug the
    ethernet cable even if I have specifically disconnected from the wireless connection before
    plugging in the ethernet cable.  It also automatically connects when I log off Windows and log back on.
    Is there a setting some place that controls whether it should automatically connect to a
    wireless profile at bootup?
    I love the brain-dead online FAQ about this exact problem.
    It says to click the Connect button if it happens.
    Well, duh!  What do I do to make it automatically connect like it used to?
    I tried unchecking the "allow computer to turn off the radio" setting as other suggested.
    But, my problem is not the radio being off.
    Thanks 

    Hi sashton,
    When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
    Avoid giving your wireless network a common name (SSID)
    http://support.apple.com/kb/HT4450
    If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
    Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
    Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Thanks,
    Matt M.

  • PC will not automatically connect to wireless network on startup...

    Hi all - I have a WRTG54 wirless router with the latest firmware.  Windows XP Home SP2.  I have a mixed network with two wired PCs and one wireless.  The wireless PC will not automatically connect to the network. To connect to the network i have to go to the wireless network properties box and check "let windows automatically configure network"  Once I do this the wirelss PC connects with no problem.  Unfortunatley, whenever i turn the PC off and turn it back on the "let windows automatically configure network" is unchecked and i have to go through the process of checking it again.  I uninstalled the wireless adapter and reinstalled the drivers only and then ran the windows wireless setup wizard but the problem persists.  Any help on this would be much appreciated.!!!! Thanks!!

    First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    Do not let "Windows automatically configure your network".  Instead do the following:
    Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use.  Delete your current network (this will remove any old settings).  Reboot computer.  Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".  Reboot computer.  It should connect automatically.  If you still have trouble, in the computer, temporarily disable your software firewall, including Windows Firewall, and see if that helps. 
    Some users have reported improved wireless connections by switching to WPA  ( = WPA with TKIP)  encryption.

  • Automatic connection to wireless network

    In FreeBSD I had my wireless connections set up in wpa_supplicant.conf and in rc.conf I had someting like: ifconfig_ath0="WPA DHCP". Nothing else. It would automatically connect to the first available network (according to the settings in wpa_supplicant.conf). I believe it also automatically switched over to another network, as I moved arround with my laptop.
    In Arch I tried the same thing, but I don't think it understood wlan0="wpa dhcp" in rc.conf, because it didn't work. It surprises me that it doesn't seem to be as simple as that.
    I have two questions:
    1) Is there a way to set this up as simple as in FreeBSD - without installation of netcfg or anythink like that - just using wpa_supplicant?
    2) With netcfg I have a long waiting time while wireless profiles fail at boot - one after another. Can I have netcfg do it faster - perhaps by having it do a scan and NOT try to connect to networks that aren't even in the scan results?

    1) Briefly, no. More specifically, you will need netcfg, wicd, networkmanager, or some other similar utility to automate wpa connections. I'm not familiar with FreeBSD, but based on the information provided, I'm absolutely certain that it is using scripting similar to netcfg. The only difference seems to be that they provide it by default, whereas Arch allows the users to install it or not as required.

  • 10.6.7 fails automatic connection to wireless

    Since the 10.6.7 update on my early 2010 MacBook Pro, I have had unreliable networking.  I move between home and work, wireless and wired.  The wireless configuration is saved, and it previously quickly and automatically connected.  Now, at each site when I first connect to the network, it doesn't make a connection and on wireless it doesn't automatically connect.  I have to repeatedly disconnect and reconnect wireless or unplug and replug in the wire.
    This latest time on the wire, I tried four times, and it still would not connect.  So, I tried turning wireless off and on, and the wired then connected.  Before, I only tried unplug/replug the wire, and that worked.
    I've looked at the networking configuration, and the IP address and DNS are correct.  But, I cannot connect to the network.  No web browsing, no email.
    It looks like 10.6.7 introduced a fault in networking related to connecting wirelessly.
    Has anyone else seen this?  Any insights?
    Thanks,
    ==Leonard

    It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
    1) Use the AirPort menu bar item to turn AirPort off, then on again.
    2) Try to select your Wi-Fi network from the AirPort menu.
    3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
    4) In the same panel as (3), define a new location and see if you can make that work.
    5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".  Note that the fix this step implements may be temporary.
    6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
    These steps may not help, but they'll only take a couple of minutes to try.  Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them.  If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

  • Does not automatically connect to wireless network anymore

    Mac Book does not automatically connect to know networks any longer.

    Hi sashton,
    When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
    Avoid giving your wireless network a common name (SSID)
    http://support.apple.com/kb/HT4450
    If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
    Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
    Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Thanks,
    Matt M.

  • Automatic connection to wireless before login?

    Hi all,
    Can anyone tell me how to make my Mac Mini (old PowerPC version) connect to a wireless network at startup, before the user is required to log in? It is running OS X 10.5.8 with a standard configuration.
    I have tried playing with the network settings, but it does not seem to associate itself with the wireless network until after a user account has logged in. (Once I do log in, though, wireless association happens quickly and normally.)
    Any ideas?
    Thanks!
    - Essd

    Ugh! I was hoping to avoid having to do some UNIX hacking, but since no one else has piped up, I figured out a semi-reasonable way to do it.
    In /Library/LaunchDaemons, create a file called "com.example.airport.plist" and place the following in it:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/
    PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Debug</key>
    <false/>
    <key>Label</key>
    <string>com.example.airport</string>
    <key>KeepAlive</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/YOURUSERNAMEHERE/bin/join-wifi.sh</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
    This tells it to run the script /Users/YOURUSERNAMEHERE/bin/join-wifi.sh at start-up. Obviously, replace YOURUSERNAMEHERE with your OS X username so that this corresponds to a folder off your home directory.
    Then, in your home directory, make sure that you have a "bin" folder for storing scripts. Create a file therein called join-wifi.sh that contains this:
    #!/bin/bash
    networksetup -setairportpower en1 on
    networksetup -setairportnetwork en1 your-network-name-goes-here 'your-WPA-key-goes-here'
    In this last file, replace the your-network-name-goes-here with the name of the wireless network, and replace your-WPA-key-goes-here with your wireless network's password.
    The next time you reboot, it should join the wireless network automatically.
    That did it for me, but I sure wish there were a more elegant solution!
    - essd

  • Automatically connecting to wireless router at startup

    Hi,
    I am trying to setup my mac so that it will connect to my wireless router automatically at startup. I have 3 users set up and the first user that logs in needs to authenticate with the admin password in order to connect to the wireless router. For obvious reason, I don't want to give the password away.
    Thanks.

    My bookpro won't auto login to my wireless network at work. The first time it asked me if I want to make the network one of my favorites I said no. Now I have to use the wireless pull down menu to log in.
    It does not ask me for password information -- it is in my keychain.
    How do I make this an automatic sign-in (not having to use pull down menu)?
    Eas

  • Macbook pro doesn't automatically connect to my wireless network

    I have set up my network preferences with my wireless networka the top of the list. This used to ensure I automatically connected, but now I have to manually connect everytime I wake my computer.

    Some possible fixes can be found here:
    https://discussions.apple.com/thread/3194917
    charlie

  • IMac can connect to wireless network automatically

    All of a sudden, my mac won't automatically join my wireless network. I can find the network easily and connect to it, but it doesn't connect automatically like it used to. This seems odd as iphones have no problem finding the wi fi network and connecting. This seems to have cropped up after I added another user account, but that may be totally unrelated. Any ideas how to fix this? Let me know if there are more details I can provide. Thanks.

    I've had this same thing for months now and I have no idea why. I do know that it started right around the time that I upgraded my iMac to Snow Leopard, but laptop (Pro) is still just regular old Leopard and it happens with it as well. I've tried everything - the approach in the previous reply to your question included - and have still had no luck. I tried all the old (2008, etc.) apple discussion forum stuff too. No joy. Please let me know if you figure it out because at this point in time I've tried everything I know. Granted, selecting a network every time I power up or wake a computer from sleep is not going to kill me, it's just....annoying.

  • I can't make my iphone 4 forget the hpsetup network which keeps showing up at work. My phone won't automatically connect to my company's wireless network.

    I can't make my iphone 4 forget the hpsetup network which keeps showing up at work. My phone won't automatically connect to my company's wireless network. I have to reselect it everytime I come to work.

    Settings/General/Reset - Reset network settings will "forget" all WiFi networks so you can select them again.
    If the problem with your company network is not solved by doing this, are there multiple sites that have the same network name for the company network? Or is it the default network name for the router type (e.g., DLINK, LINKSYS, etc)? If so, this is what is causing the problem and there is no solution other than convincing IT that it is a bad idea to have duplicate network names.

  • Unable to automatically re-connect to wireless network

    When I reboot my iBook, it does not automatically re-connect to my wireless network. I need to click the wireless icon, select "Other", and manually type in the network name and password everytime. I have a standard Linksys Wireless Access Point with SSID Broadcast turned off. Even with the broadcast turned on, it still won't reconnect. I have the password saved in my keychain also, and it is set to automatically connect to it in Network Preferences.
    iBook   Mac OS X (10.3.9)   1.3GHz, 14inch

    I'm having a similar problem, all of the sudden my MacBook won't connect to my Linksys WAP54G, that also has the SSID Broadcast turned off. The difference is that when I turn the SSID Broadcast on it reconnects fine. It's just when it is off that it won't reconnect automatically.
    The weird thing is that at the office I have the same access point with the same settings (SSID Broadcast off, but different WEP passwords) and it connects to it fine.
    Any help would be appreciated.
    Black MacBook, Intel iMac & Mini Dual   Mac OS X (10.4.8)  

  • Is it possible to connect a wireless keyboard so that it works automatically with either macbook pro or iPad depending on which is turned on or do I have to go through the delete one and re-pair the other process every time?

    Is it possible to connect a wireless keyboard so that it automatically connects to whichever previously paired device is turned on?

    Grant Bennet-Alder West of Boston, USA 
    A new 1TB External drive (suitable to replace your current Internal drive if you choose to) and enclosure can be had for under US$160
    Ehh, you meant $60 ,  not $160
    CassHeger 
    I do need to buy an external HD to be used solely for that purpose.
    Yes, quality HD are cheap as dirt.
    however a likewise Toshiba Internal HD 1TB is $70   (same as used by Apple)
    http://www.ebay.com/itm/TOSHIBA-MQ01ABD100-1TB-5400-RPM-8MB-Cache-2-5-SATA-3-0Gb   -s-Internal-Notebook-/121107538930?pt=US_Internal_Hard_Disk_Drives&hash=item1c3 2 9263f2
    best options for the price, and high quality HD:
    Quality 1TB drives are $50 per TB on 3.5" or  $65 per TB on 2.5"
    Perfect 1TB for $68
    http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
    Nice 500gig for $50. ultraslim and perfect
    http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
    2.5" USB portable High quality BEST FOR THE COST, Toshiba "tiny giant" 2TB drive (have several of them, LOT of storage in a SMALL package)    $117
    http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
    *This one is the BEST portable  external HD available that money can buy:
    HGST Touro Mobile 1TB USB 3.0 External Hard Drive  
    $88
    http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+72 00+RPM
    Most storage experts agree on the Hitachi 2.5"

  • Connecting to wireless Networks automatically upon boot

    Hi there all,
    I have a G4 Laptop with a Airport wirless card in it. I have successfully connected to my wireless network in my home, but I was wanting to automate this process upon booting OSX. So what I want to know is how can I config OSX so everytime it boots, it will automatically connected to my wireless network(without manually doing it)
    Thanks for the help!
    jlfutari

    Hello jlfutari. Welcome to the Apple Discussions!
    So what I want to know is how can I config OSX so everytime it boots, it will automatically connected to my wireless network(without manually doing it)
    First, create a new Location with your Wi-Fi as the "Preferred Network."
    Create a new network Location w/Preferred Network
    o System Preferences > Network > Show > AirPort
    o Location: New Location...
    o Name your new location: <enter a location name>
    o Click "OK"
    o Click on the "AirPort" tab to select it.
    o By default, join: Preferred networks
    o Select a "preferred" network from the list, or click "+" to add a new one.
    o Click "Options..."
    o If no preferred networks are found: Ask before joining an open network.
    o Click "OK"
    o Click "Apply Now"
    Second, setup AirPort to default to the "Preferred Network."
    System Preferences > Network > Show > Network Port Configurations
    o Verify that AirPort is "On" (checked)
    o Verify that AirPort is at the top of the list. If it isn't, you can drag it to the top.
    Systems Preferences > Network > Show > AirPort
    AirPort tab
    o By default, join: Preferred networks

Maybe you are looking for