Automatically generate email on failed events - SWEQADM

Hi All!
Is there any chance i can generate email notification within the transaction "SWEQADM"?
This should happen on any failed / defective event --> send email to a specific adress.
If there is please let me know. Thanks.
Tatiana

Hi,
I think CCMS alert configuration will help you, find below link for more information.
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm

Similar Messages

How to change the automatically generated email address?

Hello,
The description of the problem is as follows:
When our system sends to the customer the report with account statements (as an attachment) the automatically generated text that he receives in the email is:
"Please respond to "K047472" "
but the text should be:
"Please respond to "(..here must be a certain email address we want the customer to respond)"
Do you have any idea how to change this?
regards,
Slawek

Hi Slawomir
Please go to SE91 and change the message text.
thanks
Ashok
assign points for useful answer

Programmatically generated emails sometime failed with error "Message included an invalid address".

Hi,
I am facing a strange problem. I would appreciate if someone can help me.
Our application sends emails periodically (every 30 minutes). Initially emails send out correct but then the emails stop with error message "Message included an invalid address" after some time.
FYI, the devices are using MDS/BES connection. Contect protection is enable. etc.
Below is the code used to send emails:
Message message = new Message();
Address toAdd = new Address(emailTo, emailTo);
Address toAdds[] = new Address[1];
toAdds[0] = toAdd;
message.addRecipients(Message.RecipientType.TO, toAdds);
message.setSubject(subject);
message.setContent(messageData);
net.rim.blackberry.api.mail.Transport.send(message);
Thanks for your time.
Sali

I enabled the contect protection on my test device and then after few emails the emails show red cross when device was locked with the same error.
So I believe the email does not go out when the content protection is enable and deice is locked.
Any idea to fix our email process?

Wrong URL in automatic generated subscription Email???

Hi,
if i receive an automatically generated Email from the Portal (subscription news) i can not open the URL which was send by the Email. My problem is that the included URL contains always the portnumber and works not with SSL (htts). For example i get the URL: http://company:50200/..... instead of the URL: http<b>s</b>://company/... . How can i change the configuration in order to get the right URL?
regards,
Sharam

Hi,
Refer to this thread
https://www.sdn.sap.com/irj/sdn/thread?messageID=1477594#1477594

I am receiving emails fine but people sending emails are getting "This is an automatically generated Delivery Status Notification."

So people sending me emails are getting this notification even though I am getting all of their emails.
This is an automatically generated Delivery Status Notification.
Delivery to the following recipients was aborted after 1 second(s):
* [email protected]
Reporting-MTA: dns; resqmta-po-10v.sys.comcast.net [96.114.154.169]
Received-From-MTA: dns; resomta-po-03v.sys.comcast.net [96.114.154.227]
Arrival-Date: Fri, 13 Mar 2015 00:11:39 +0000
Final-recipient: rfc822; [email protected]
Action: failed
Status: 5.1.1
Diagnostic-Code: smtp; 550 5.1.1 Recipient address rejected: {Gateway}
Last-attempt-Date: Fri, 13 Mar 2015 00:11:40 +0000
Received: from [10.0.0.4] ([174.63.66.5])
by resomta-po-03v.sys.comcast.net with comcast
id 2oBe1q00S06oTie01oBfmR; Fri, 13 Mar 2015 00:11:39 +0000
X-Authority-Analysis: v=2.1 cv=brXCBSqi c=1 sm=1 tr=0
a=d75dIf30LeQD1RLuRZUoGw==:117 a=d75dIf30LeQD1RLuRZUoGw==:17 a=C_IRinGWAAAA:8
a=GGcpBh7Jt_oA:10 a=73ab78M7B2EA:10 a=r77TgQKjGQsHNAKrUKIA:9
a=9iDbn-4jx3cA:10 a=cKsnjEOsciEA:10 a=gZbpxnkM3yUA:10
a=6BrDaJ5WXvREvQ-J4T4A:9 a=QEXdDO2ut3YA:10 a=jHBHo6-IVdtYVL4fa8AA:9
a=_W_S_7VecoQA:10 a=qOu-Zh59HcEA:10 a=AfkkXffo6PgA:10 a=2rOyub8MfPoA:10
a=MPPUs8NNPK4A:10
Message-ID: <[email protected]>
Date: Thu, 12 Mar 2015 20:11:31 -0400
From: Michael Hamilton <[email protected]>
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.5.0
MIME-Version: 1.0
To: [email protected]
Subject: test
Content-Type: multipart/alternative;
boundary="------------050909070108050106030501"

I have sent you a test message.
added: I got the same Notification from Comcast. If you go to the comcast website, is there a place to request an 'out of office' or 'vacation response'? If so, is that turned on?
Did you receive my email?

Can I automatically generate a contact list from my emails?

I've been using Mail for years. But not Address Book.
I've got about 10,000 emails, and I'm wondering if there's a way to pull all the email addresses from Mail and automatically generate an Address Book out of it?
Or is there a utility somewhere?
Thanks in advance!

Yes there is.
There is a collection of AppleScripts called Mail Scripts available at this link.
http://homepage.mac.com/aamann/Mail_Scripts.html
The script you want to use from the collection of scripts is called Add Addresses.
+*Add Addresses*+
+Select all messages you want to use for creating the mailing list (for creating a mailing list, you would choose all messages in a mailbox which contains all messages on a certain topic).+
+Run the script and you get a list with all addresses contained in the selected messages - mark all the addresses you want to add to the Address Book using the checkboxes.+
+From the popup menu, choose which group you want to update with the selected addresses or select "Create new Group..." and enter the name for the new group to be created.+
+The script checks whether an address is already present before adding it to the Address Book in order to avoid duplicate entries. If additional information is available for an entry already present in the Address Book (e.g., full name information for an entry which had prior been email-only), the entry will be updated.+

Automatically generated site connectors in Active Directory all default to the same site

Greetings,
I have a Single Forest/Single Domain configured with 17 sites. We are currently in 2003 native mode, but are upgrading to 2102R2. The schema has been upgraded and 3 site have been moved to 2012R2 domain controllers.
Each site has one domain controller, most are 2003 but the FSMO roles are on a Windows 2008R2 domain controller in Site1.
Our network is a mesh, but many site have different bandwidth speeds. In this case, Site3 has a 6mb connection to the network.
When I upgraded site3, I couldn't add the renamed replacement server to the domain. The demotion proceeded properly and the objects were removed from sites and services. I found I had problems with duplicate SPNs which were solved by removing the old and
new servers from AD. I still had problems with the new server and found that replication was now broken. We traced it down to to corrupt automatically generated site connectors that all still pointed to the now missing site3 domain controller. I was able to
setup manual replication connectors and then regenerate the automatic connectors, which now pointed to the (in my opinion) proper servers. I only have one manually created site connector to minor site that is not part of the mesh.
This behavior was noticed back in late 2012 when another replication problem occurred during maintenance and was fixed.
This morning I was working on Site4 when I noticed that all the automatically generated site connectors switched back to the new Site3 domain controller.
Can anyone help me determine why the system seems to prefer site3 as a hub. Is there some setting stuck or configured that would make site3 preferential? I want to avoid more down time if site3 has a problem.
Thanks
Derek

Hi Derek,
>>Can anyone help me determine why the system seems to prefer site3 as a hub. Is there some setting stuck or configured that would make site3 preferential?
This should be decided automatically by KCC. The Knowledge Consistency Checker (KCC), a process running on each domain controller, automatically identifies the most efficient replication topology for our network, based on information we provide
about our network in Active Directory Sites and Services.
The KCC runs at specified intervals to adjust the replication topology for changes that occur in Active Directory, such as when new domain controllers are added and new sites are created. The KCC reviews the replication status of existing connections to
determine if any connections are not working. If a connection is not working due to a failed domain controller, the KCC automatically builds temporary connections to other replication partners (if available) to ensure that replication occurs. If all the domain
controllers in a site are unavailable, the KCC automatically creates replication connections between domain controllers from another site.
Regarding Active Directory replication, the following articles can be referred to for more information.
Active Directory Replication Concepts
https://technet.microsoft.com/en-us/library/cc756899(v=ws.10).aspx
Managing replication
https://technet.microsoft.com/en-us/library/cc757117(v=ws.10).aspx
KCC and Topology Generation
https://technet.microsoft.com/en-us/library/cc961781.aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to set a field that automatically generates a unique 'code'/'ID' for fillable PDF form?

Hi,
I'm trying to create a PDF fillable form with Acrobat X Pro.
Can Acrobat allow a function, so that it can automatically generate a 'number'/'code' which I could use as an 'identifier'?
eg. A hidden field named: 'DOC ID' and provide 100001 when added to response file as it's submitted and '100002' to another file when it another is submitted/added onto the response file etc...
I am aware that Response files, if submitted correctly, could automatically generate numbers like 001, 002 etc...
But I'd like to see if I could create a field, that 'numbers' the document for me automatically and uniquely.
Any help and/or suggestions would be appreciated.
Winnie

Hi,
to do this you need kind of interactivity in your form.
You can achieve this either by:
1) using JavaScript onchange-events on forename and surname items, or
2) use the AJAX Computations option of ApexLib, see: http://www.oracle-and-apex.com/ajax-computations-rich-client-feeling/
brgds,
Peter
Blog: http://www.oracle-and-apex.com

Email Sending Fail

I have a problem of sending mail through my NOKIA device 5235 for 30 days,I already complaints by mails & calls more than 10 times for this problem to customer care but not given solution for this matter.when I tried to send the mail below errors is display through mail
(This is an automatically generated Delivery Status Notification
>>530 5.7.0 Must issue a STARTTLS command first)

It's possible that your email account provider has recently begun to use a secure port for sending & receiving emails, try changing the smtp setting to use SSL.

BO Generate Emails

Hi All,
We schedule some webi reports and send out the reports by email. Sometimes the reports do not have data return. Are there any methods to generate emails that only the reports contain data?
Thanks.

Hi,
Could you please explain more on how to use event in my case? I didn't use event before.
Thanks.

Convert email to ical events

I am looking for a way to automatically convert emails i recieve into calendar events in different calendars. I have looked into the mail.app "add invitations automatically" but i dont want all my email accounts to sync with the calendars.
I have tried mail2ical (every event gets put into one calendar, and the event time is the time of the email recieved), eventmaker (it thinks i am making events for the future). I have taken a look into automator, but im not sure if it has the actions im looking for.
I manage 5 different people and their work schedules. At the end of a day, after multiple projects have been worked on, i get 5 different emails each from 5 different people. Each email outlines different projects they worked on ( project name is in the subject line), along with the time they worked and what they did.
My current workflow is i go through each email one by one. I copy the contents of the email, then click on the time they worked to open a ical event. I then paste the contents into the notes and create a event. Each person has their own calendar which show the projects they have worked on for the day.
I will be gettting another 5 more people to manage and with this workflow i will be manually sorting 50 emails a day! In the long run this isnt a effienct workflow, im looking for a way to automate this entirely.

Hi,
I wouldn't expect you are going to find an application to do that, as the format the emails you mention could vary widely. Posibly some sort of bespoke script could do it.
Best wishes
John M

ABAP code to automatic generate an BW Report

HI Sap BW gurus,
Can anyone tell me if exists an abap code to automatic generate an report from a query and save it on an directory in HTML format?
Thanks in advanced,
Pedro Martins

You can use this tool...
/people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-i
but then you would have to store it into an application server directory as HTML - there is also a how to paper by the same author which you can use... which talks about email query results in HTML
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b7658119-0a01-0010-39a9-b600c816f370;jsessionid=%28J2EE3414800%29ID1001478750DB10940138154678751341End

Can I automatically generate documentation from Description and Tip entries?

Is there a way to automatically generate documentation for a LV 6.1 VI from the Description and Tip fields for all the different nodes? Something like JavaDoc or something?
I've seen another note here on the board saying you can do it from within the VI using property nodes, but that seems like a somewhat convoluted way of going about it, especially for a large modular VI.

Also, the LabVIEW Help has step-by-step instructions for generating documentation for VIs. Here's an example:
Generating HTML Documentation for VIs, Templates, and Objects
You can import HTML files into most word processing applications, and you can use HTML files to create compiled help files.
Complete the following steps to generate HTML documentation for a VI, template, or object.
Open any VI, control, global variable, or template file and select File�Print to display the Print dialog box.
In the Select VIs page of the Print dialog box, select the file or files for which you want to generate HTML documentation.
Click the Next button to display the Print contents page.
Select the components you want to include in the documentation.
If you selected Custom, click the Next button to display the Custom details page and select the components you want to include in the documentation. Otherwise, continue to the next step.
Click the Next button to display the Page setup page.
Select the options to set the appearance of the documentation.
Click the Next button to display the Destination page.
Select HTML file.
Click the Next button to display the HTML page.
Select the options for the images.
Click the Save button to display a file dialog box. The dialog box prompts you to name the HTML and image files and select the directory where you want to save the files. The default name of any HTML documentation is the name of the VI with a .html extension.
You also can use the Easy Print VI Panel or Documentation VI or the Print VI to HTML method to generate VI documentation in HTML format programmatically.
This topic in particular links directly to the topics that describe how to use the methods to achieve the same thing programmatically.
If you have any feedback on the content of the LabVIEW Help, please let us know by emailing [email protected]
Thank you,
Kelly Holmes
Kelly H
LabVIEW Documentation
National Instruments

SAP generated Emails to workflow adminitrator: Changing the text

Hello all.
We have configured the 'Event Queus Administration' to send an email to the Workflow Administration if there is an Even Linkage error. My question is does anyone know where SAP sources the mail content from. I need to change the body text so that it is more user friendly to the end user.
Many Thanks
Paul Swinnerton.

Thanks for your reply.
My workflow is not generating the email. It is SAP standard to send an email if an event linkage error is caught by the "Event Queue Administarion' tool. I just want to know where SAP gets the text that is contained in the body of the email. I'm guessing it may be stored in a table somewhere or there is a specific task with placeholders embedded into the task description. Am bleeding profusely after repeatedly hitting my head agianst the wall with this one.
Many Thanks
Paul

Why is the automatically generated RoboHelp TOC limiting itself to the top 2 topic levels?

I'm using TCS 4 with RoboHelp v10.0.1.292 and FrameMaker v 11. I created some dummy DITA files in FrameMaker11 using the default choices and organized them in a ditamap to learn how to work with multiple topic levels. My ditamap has 3 topic levels. All 3 levels display in RoboHelp's Project Manager, however only the first 2 levels display in the automatically generated TOC. (After generating WebHelp output, I can do a search and find the 3rd level content, but the 3rd level topics are not displayed in the WebHelp TOC either.)
First graphic: 3rd level files in Project Manager pod match how they are arranged in FM, and where they failed to show up in the FMTOC pod.
Second graphic: I found that I can get the 3rd level to display in the RoboHelp TOC and in WebHelp output if I click the TOC pod AUTO-CREATE TOC icon - is this the solution or is there something I just haven't got set up yet? If regenerating the TOC in RH is the solution, how do I get the accompanying file name problems to go away, i.e. the ditamap FILE name now replaces the ditamap TITLE, and worse, one of the task file names has replaced its title name.
Thanks for any clues you can provide.

I have moved this to the FrameMaker Integration forum in the hope you get a reply here.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Automatically generate email on failed events - SWEQADM

Similar Messages

Maybe you are looking for