Programmatically generated emails sometime failed with error "Message included an invalid address".

Hi,
I am facing a strange problem. I would appreciate if someone can help me.
Our application sends emails periodically (every 30 minutes). Initially emails send out correct but then the emails stop with error message "Message included an invalid address" after some time.
FYI, the devices are using MDS/BES connection. Contect protection is enable. etc.
Below is the code used to send emails:
Message message = new Message();
Address toAdd = new Address(emailTo, emailTo);
Address toAdds[] = new Address[1];
toAdds[0] = toAdd;
message.addRecipients(Message.RecipientType.TO, toAdds);
message.setSubject(subject);
message.setContent(messageData);
net.rim.blackberry.api.mail.Transport.send(message);
Thanks for your time.
Sali

I enabled the contect protection on my test device and then after few emails the emails show red cross when device was locked with the same error.
So I believe the email does not go out when the content protection is enable and deice is locked.
Any idea to fix our email process?

Similar Messages

REP-56071: Security check failed with error message: Error code30009 - Gene

REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
Hello,
I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
one more thing...
We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
Tx,
Diego.

I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
Regards.

REP-56071:Security check failed with error message:No privilege to do oper

Hi
I get the following error when I try to see the job status (..../rwservlet/showjobs?)
REP-56071: Security check failed with error message: No privilege to do the operation
I also get the following error on running any report on this server:
REP-110: Unable to open file 'Test.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'Test.rdf'.
Anyone seen the same issue before?

Fugured it out - had issues with reportserver.conf file.
_*

Installing OS4 - restore fails with error message 1014 - 3GS unusable

I tried to install OS4 on my 3GS iPhone. Process reported that a restore and update were required. The restore failed with error message 1014. This has rendered the phone unusable. Any help for me since Apple technicians from India weren't able to help.

Anyone got this fixed, I also have the same problem. I got an error during update, then the iPhone went into Recovery Mode and iTunes says it has to be restored and updated, but the restore has taken over 15 hours know and Applecare told me to wait or come to an applestore... I'm on holiday in Europe and I have a 12 hour fligth in a few days back to the US...

REP-56071: Security check failed with error message

Hi!
We have an Oracle 9iAS R2 v9.0.2.2 installation on Linux (Red Hat Advanced Server 2.1). We have installed PatchSet 2703110, 2581587 and 2842923.
Oracle9i Reports version is: 9.0.2.2.0
iAS and Infrastructure are on separate hosts.
Trying to run Reports demo test.jsp or test.rdf we get the following message:
javax.servlet.jsp.JspException: REP-56071: Security check failed with error message: Error code30001 - Cannot access the server:rep_dkipcias
In package:wwv_rw_usr function:security_check
Command line is: server=rep_dkipcias report=/repdemo/examples/Tools/test.jsp rundate="29-MAY-03 09:05:01"
Found on Metalink the following Note: 216847.1
This recommends to comment out the security and destination tags in ORACLE_MIDDLETIER_HOME/report/conf/<repserver>.conf file
After commenting them out reports works fine.
BUT
at the end of the note there is a note which states that "Commenting out the security tag removes the integration of the reports server and portal."
We need reports integration with Portal. We need SSO as well.
Could you give any workaround for this problem?
PS.: I have red Note:213171.1, Note:216118.1, http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/securing9i.pdf and BUG:2645629
None of them gave any solution for the problem
Thanks in advance,
Andras Weintrauth

Hi Jeff,
Q(1): Yes.
(Report Name and Servers tab)
Report Server: REP_DKIPCIAS
Oracle Reports File Name: test.jsp
Execute: as JSP
(Other tabs)
Default values. Unchanged.
Q(2): (Acces Tab of Report Component)
Publish to Portal = checked
Inherit Privileges from Portal DB Provider = checked
(Acces Tab of Report Server Component)
Inherit Privileges from Portal DB Provider = checked
(SSO User)
The user I try to run the report with has the following group assignments:
Privilege Group
PORTAL_ADMINISTRATORS
PORTAL_DEVELOPERS
DBA
PORTLET_PUBLISHERS
Additional Info:
To be more specific: The mentioned security check failure exists outside of Portal as well. Eg. when we try to run the default portal test examples (test.jsp, test.rdf) from the iAS home page Demonstartions tab.
Thank You in advance,
Andras

How do I fix Creative Suite CS2 reinstall with error message "Missing or Invalid Personalization Inf

How do I fix Creative Suite CS2 reinstall on same Windows 7 Pro machine, with error message "Missing or Invalid Personalization Information / Missing Resources Library" when I attempt to reinstall from installation disk set? Was having trouble with Adobe Acrobat Pro 8; Uninstalled and am now stuck. You can email me if you like at [email protected] Thank you.

Hi Bill:
     I don't remember deactivating (after my XP PRO harddrive scattered)
when I did the first Windows 7 pro install of these programs and it went
fairly well except AA8 was a little problematic when converting from MS
Word.
     In my case the AA8 came with a Studio 8 suite of programs as follows:
     1) A Studio 8 installation disk
     2) A Creative Suite CS2 Premium set of installation disks.
     3) A Creative Suite 2.3 Premium upgrade disk with AA8
     I uninstalled AA8 and when I tried reinstallation the directions
said to do the Creative Suite CS2 Premium set of installation disks
first followed by the Creative Suite 2.3 Premium upgrade disk with AA8.
Now I'm stuck; What a mess.
     Thanks for trying to help.
     I will do as you suggest and go to
http://forums.adobe.com/community/creativesuites but FYI:
Bob Lane

Problem replying to emails: Message status "message included an invalid address"

Blackberry Curve 8310 on BIS with OWA on in-house Exchange 2003 (sbs 2003).
We have problem sending BIS email since last few days. The problem usually comes with replies to emails and when you open the unsent email (marked with a red cross) the status reads "Message included an invalid address".
We have tried following so far;
- Recreating account at Vodafone site
- Resent service books
- In Options->Language->Name Display set to ‘First Name Last Name’
- The ‘Workaround’ from the end of blackberry article KB00035, except the ‘Generate new encryption keys’ part as our version of Desktop Manager does not seem to have ‘Redirector Settings’ or ‘Email Settings’ options.
We are rather desperate at this point. Any help to resolve this would be appreciated.
Many Thanks

I have the same exact issue when replying or forwarding from the device. Did you ever find a solution to this?

_Media creation failed with error message: 'The system cannot find the path specified.'

SCCM 2012 R2 CU2 all latest patches.
I attempted to create a task sequence media and I get the error in the screenshot below. I have deleted and recreated the operating system,boot image, driver pack and task sequence. The usb media is 16GB and the task sequence size is 3004MB.
I only see the error in CreateTSMedia.log as below. How do you fix this?
<![LOG[Beginning media generation]LOG]!><time="12:37:44.522+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:418">
<![LOG[Partition activated]LOG]!><time="12:37:47.720+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="diskvolume.cpp:849">
<![LOG[Finished formatting volume F:\]LOG]!><time="12:37:55.723+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:772">
<![LOG[Assigning staging directory to F:\]LOG]!><time="12:37:55.724+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:1122">
<![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:476">
<![LOG[ Beginning pass to compute volume layout]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:479">
<![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:487">
<![LOG[Setting up new volume]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1297">
<![LOG[WriteVolumeId()]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1038">
<![LOG[Failed to create media (0x80070003)]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="3" thread="4668" file="createtsmedia.cpp:345">
<![LOG[CreateTsMedia failed with error 0x80070003, details='']LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="createtsmedia.cpp:355">
<![LOG[MediaGenerator::~MediaGenerator()]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:396">
<![LOG[Media creation process that was started from Admin Console completed.
]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4772" file="createmedia.cpp:1065">
<![LOG[CreateMedia.exe finished with error code 80070003]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="2" thread="4772" file="createmedia.cpp:1123">

Hi,
Error code 0x80070003 = "The system cannot find the path specified."
Have you checked the log file smsAdminUI.log? Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Fiscal Year Change in MM failing with error message

Hi I am with a company that is using SAP R/3 ECC6 Modules SD MM FI CO with COPA (costing based) for reporting. Our fiscal year runs 1 August to 31 July. I am a FICO support analyst, currently also filling in for SDMM until we complete recruitment of a new person in that post.
In MM when trying to open the new period/close the old, we are getting the error message 'The specified year 2009 is not the current calendar year.' the detailed log says 'incorrect period in control record of CoCo. The current period (month/year is 112008)
I have:
1) Maintained our FYV in the IMG and it is set to year independent (tried making it year dependent but that didn't solve the problem)
2)Set the apppropriate periods with correct year shift and texts
3) Assigned the CoCode to the FYV
4) Checked that the proper variant for posting periods are set.
5) Set the Global parameters for the CoCode
Financial postings work fine and there seems to be no problem with the FYV there, and everything worked Ok last year (our first with SAP since Go Live).
I have searched the relevant sections in my SAP Press config manuals for FI and MM and done a search on Google but there must be something I am missing.
Can anyone suggest a solution, please.
Thanks in advance
David

Thanks anyway, Vijay, but OB52 is for changing Fiscal periods. That table is set correctly, the financial postings wouldn't be working if it wasn't.
I hadn't checked OMSY, Syed, thank you for that suggestion. There are no entries in any of the fields for Year or FYr. I am willing to make entries here to try it if there is a good reason but why would it have worked all through FY2008 without any entry in these fields but fail now in the new FY? The period change worked without problem for the past 12 months, isn't this the same as most SAP fields i.e. if you enter nothing then it is open for everything, in this case all years?
I am using MMPV to try to open the new period but it is there that I am getting the error messages.
Edited by: David Crossley on Aug 11, 2008 1:00 PM

Windows 10 upgrade fails with error message "we couldn't update the system reserved partition"

HP and Microsoft both indicated my notebook was ready for upgrade to Windows 10, but when I tried to do the upgrade it failed - repeatedly - with the error message from Microsoft that "we couldn't update the system reserved partition." What to do?

The system reserved partition serves a purpose. If it is deleted, then the OS will not boot back up. In which case you are toast.ON THIS PAGE, it tells what the partition is used for.-The Boot Manager and Boot Configuration Data : When your computer boots, the Windows Boot Manager starts up and reads the boot data from the Boot Configuration Data (BCD) Store. Your computer boots the boot loader off the System Reserved partition, and it boots Windows from your system drive. I advise that you not do what CanhThanh is instructing

Scheduling a Deski report fails with error message: "Failed to get property

Hi,
We have created few Desktop Intelligence report. Now when these report are schedules to be refreshed weekly (on Sunday), it fails with the following error message:
"Failed to Get Property"
Have tried to refresh the reports manually in Full Client too but the report fails there too.
Have checked for the connection information. The servers are up and running.
Have tried to re-create the connection and even tried to re-import and export the Universe.
If we rename the report and save it and export, it works fine. Can not try this workaround as have more that 500 reports.
Please suggest.
regards,

Hi Maria,
usually the message "Failed to Get Property" is followed by an item name such as SI_FILE, or SI_VARIABLE, or SI_USE_ORIGINALDS, and so on.
Could you please specify as much information coming from the error message as you can?
Furthermore, is this issue happening with any Desktop Intelligence reports you schedule?
Are the reports using the same Universe?
Which DB are you using?
Regards,
Samanta F.

SSM BIOS Deployment Ends Sometimes Fails With Error 0x642

Good morning,
I am currently trying to use the SSM software to deploy a BIOS update to my 300 HP Folio 9470m and am running into an intermittent problem. The problem I am seeing is that sometimes the deployment will fail with a 0x642 dependency error. I have not been able to determine a reason for the failure, and the same package deployment will work on a different laptop.
The only consistency I have been able to reproduce is that if the install fails the first time, it will fail every other time on that particular laptop.
I have included log files from a successful and unsuccessful deployment. I have confirmed that it does not appear to be an issue with using the incorrect BIOS password, because I can set the password to the one specified when I created the deployment database and it will still sometimes fail.
Let me know if I can provide any additional information. Any help would be greatly appreciated. I really would like to be able to use this software as it would make my job managing these laptops a whole lot easier.
Thanks,
Raymond Northcott
Log file from successful deployment: https://drive.google.com/file/d/0By0fDHxxVEc6SHhZb0VDRVRMRWc/edit?usp=sharing
Log file from unsuccessful deployment: https://drive.google.com/file/d/0By0fDHxxVEc6NXdEOTV6bnJ3TGc/edit?usp=sharing
This question was solved.
View Solution.

I know it is late but I have only seen this post today.
The team responsible for SSM does not monitor this forum.
According to the logs you have posted, you are using SSM version 2.14 A8.
Your version pre-dates the design and production of the 9470 folio by approximately 3 years.
There have been many changes to SSM since 2.14.
Please update to the latest version.
You can ask questions about SSM and other client management tools in the HP PC Client Management Community forum.
      HP PC Client Management Community forum
The pc client management discussion board is focused on the following topics but is not exclusive to them:
HP Client Catalog
                The HP Client Catalog for Microsoft System Center Configuration Manager products is used in the deployment of HP software updates (SoftPaqs) to HP commercial PCs in a Microsoft System Center environment.
HP Driver Packs
                HP Driver Packs contain the necessary Microsoft Windows drivers required
to support HP hardware platform(s) listed in each of the driver pack’s release notes.
HP Client Integration Kit
The HP Client Integration Kit ( HP CIK ) is a plug-in for Microsoft System Center Configuration Manager.
HP BIOS Configuration Utility
The HP BIOS Configuration Utility ( HP BCU ) provides the ability to manage BIOS settings on HP supported desktop, workstation and notebook computers.
HP System Software Manager
The HP System Software Manager ( HP SSM ) is a utility for updating BIOS and device drivers on your networked PCs.
These tools and more can be found at www.hp.com/go/clientmanagement
Look in the Resources menu for items such as the HP CMS Download Library, HP CMS Whitepapers or HP Driver Packs.
The HP CMS Download Library contains the latest release version of SSM.
      HP CMS Download Library
If you have questions about SSM or any of the other utilities listed, this is the best forum to find answers.
thanks,
Richard
I work for HP but am not a company spokesperson. Participation in the community forums is voluntary.

Essbase LCM export on non-foundation machine fails with error message EPMLC

Running an lcm utility command line export on a non- foundation machine fails with an error message:
EPMLCM-30043: Unable to load the plugin class com.hyperion.essbase.lcm.ESBLCMPlugin
bare in mind that:
- other exports like planning and foundation metadata exports run succesfull on this non-foundation machine
- running an essbase export from the foundation user interface succeeds too.
What files can be missing or other issue can cause this?
Detlev

release transfer should work by steps what have you followed only requirement is to have create the similar namespace in the target software component first and then do the release transfer.
one thing just try unchecking the target SWCV (original objects option at down it should work then)
1.To release objectse from one SCV to another you need to follow the following procedure.
Login to Integration Repository.
Click on Tools -> Release Transfer. You can select the source & target interface or select individual objects if you want..
If you need further clarifications do let us know.
2.you may not have authorization to use Release Transfer so i would suggest use copyobject option to copy from one SWCV1 to SWCV2. right click on source select cop option change the SWCV
Select the namespace under your SWCV. Go to Tools->Release Transfer.
It will transfer all the objects under this namespace to the specified SWCV.
For reference plese see the following documents:
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/e8/e8573ba5f13048be50532fc3fcea9c/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/18/23078bdbd241f08efb3e36cf10c9d0/frameset.htm
Or else you can select individual objects under the namespace and right click on the object and select Copy Object. You will get a dialog box where you can select the new location where you want to copy this object.

Project Server 2010 - Update Scheduled Queue job failed with error message" Error no 131- AssignmentAlreadyExists"

Hello,
When I tried to update the schedule of the project , the job failed with the error message " AssignmentAlreadyExists". I further looked into the ULS logs but it wasn't that helpful.
This is the message I found in ULS logs "type = UpdateScheduledProject failed at Message 5 and is blocking the correlation Errors: AssignmentAlreadyExists,Leaving Monitored Scope (FillTypedDataSet -- MSP_WEB_SP_QRY_ReadTimeSheetAssignmentsAndCustomFieldData).
Execution Time=398.730006187937"
Pplease help me to understand the root cause of this problem.
I have verified all the assignments in the plan and I did not find any duplicates.
Thanks in advance.
Sesha

This issue might need detailed troubleshooting, I would suggest you raise a support case with Microsoft.
Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading
the thread.

Time Capsule backup constantly failing with error message - error message 11 but different file.

Hi
I have had problems with my backup failing since 12 June
Most of the time I get error message 11 (have had error message 31 once) and each time it is a different file. The last failure gave this message in console
17/06/2011 13:20:11 com.apple.backupd[1743] Indexing a file failed. Returned 200 for: /Applications/Microsoft Office 2011/Office/CalendarCore.framework, /Volumes/Time Machine Backups/Backups.backupdb/Stephen Dalziel’s iMac/2011-06-16-232227.inProgress/10F26F18-689F-47D2-959E-964D07E82445/Macintos h HD/Applications/Microsoft Office 2011/Office/CalendarCore.framework
I have followed Pondini C3 by excluding the file from the first message but then failure occurred with a different file so excluded that and it failed again.
Went through repair A5 - that took an age even connecting via ethernet - still not working.
I have to confess that before I got to Pondini troubleshooting I googled the problem and a forum said delete latest and partial backups from sparse bundle - I did this via Finder and now I can't get rid of them from trash - discovered via Pondini I shouldn't have done this and tried E6 but without success.
What are my options?
I can use a computer but technical jargon is like Hieroglyphics to me so if you can reply in simple plain English that would be useful

Stephen Dalziel wrote:
a forum said delete latest and partial backups from sparse bundle - I did this via Finder and now I can't get rid of them from trash - discovered via Pondini I shouldn't have done this and tried E6 but without success.
Did you delete the Latest alias, and/or the most reccent time-stamped backup? If so, your backups are toast.
Your only option is to erase the Time Capsule's disk and let Time Machine start fresh. See To erase everything on the Time Capsule’s internal disk in #Q5 of Using Time Machine with a Time Capsule.

Programmatically generated emails sometime failed with error "Message included an invalid address".

Similar Messages

Maybe you are looking for