Automation not working in multi output stereo?

I changed my stereo outputs into multi output stereo and noticed that the volume automation is not being read any more. All the volume levels are still moving up and down but the sound itself stays at the same level. I tried out what would happen if I set them back to normal stereo and yes, the automation works again. Why is this?

Have you tried opening the file in your browser to see if the bookmarks are working? To open the file in your browser you need to do this:
1) Launch your favorite browser;
2) File >> Open >> Select your pdf file
See this picture to see what I am talking about. You might need to click on it to magnify it:
Good luck.

Similar Messages

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava Chunduri

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

Bookmarks not working in multi-document PDF application

Why are bookmarks not working in multi-document PDF application when uploaded to the web? We created a multi-document PDF application. All bookmarks and links work on our systems. All work on the customer's system. They do not work when uploaded to the customers website. Their IT department says its an issue of relative vs. absolute addressing. We've created applications like this for years without running into this issue. Can't find anything about it in Acrobat Help. Can anyone help or lead me to help? Thx much, Sandy

Have you tried opening the file in your browser to see if the bookmarks are working? To open the file in your browser you need to do this:
1) Launch your favorite browser;
2) File >> Open >> Select your pdf file
See this picture to see what I am talking about. You might need to click on it to magnify it:
Good luck.

Raise form_trigger_failure is not working in multi-record block?

raise form_trigger_failure is not working in multi-record block.
Why?
I am using Form 9i.
Thanks and regards,
Vikas

Here is my code. Workorder_master is single block, workorder_dtls is multi-block.
This code is written in KEY-NEXT-ITEM of labour_code in workorder_dtls.
If suspended labour, invalid labour etc. is selected then it should not leave labour_code, but does not happen as I like. What will be the solution?
DECLARE
v_count                         NUMBER;
v_status                    CHAR(1);
v_workorder_no     VARCHAR2(15);
v_pass_no                    VARCHAR2(15);
v_rec_pos                    NUMBER;
BEGIN
     IF :workorder_dtls.labour_code IS NOT NULL THEN
          v_rec_pos := :SYSTEM.CURSOR_RECORD;
          SELECT COUNT(*) INTO v_count FROM labour_master
                              WHERE labour_code = :workorder_dtls.labour_code;
          IF v_count > 0 THEN --if labour exist.
               SELECT status INTO v_status FROM labour_master
                              WHERE labour_code = :workorder_dtls.labour_code;
               IF v_status = 'I' THEN--'I' stands for busy.
                    --check if labour is for extension i.e. if labour is working for same workorder
                    SELECT COUNT(*) INTO v_count FROM workorder_dtls
                                        WHERE labour_code = :workorder_dtls.labour_code
                                        AND workorder_no = :workorder_dtls.workorder_no
                                        AND to_dt <= SYSDATE;
                    IF v_count > 0 THEN
                         --if working in same workorder then for extension, then give from_dt, to_dt
                         SELECT MAX(TO_DT)+1 INTO :workorder_dtls.from_dt FROM workorder_dtls
                                             WHERE labour_code = :workorder_dtls.labour_code
                                             AND workorder_no = :workorder_dtls.workorder_no
                                             AND to_dt <= SYSDATE;
                    ELSE
                         --if not working in same workorder then give message.
                         SELECT workorder_no, pass_no INTO v_workorder_no, v_pass_no FROM workorder_dtls
                                             WHERE labour_code = :workorder_dtls.labour_code
                                             AND to_dt <= SYSDATE;
                         MESSAGE('This labour is already working through workorder no. '||v_workorder_no||' using pass '||v_pass_no);
                         MESSAGE('This labour is already working through workorder no. '||v_workorder_no||' using pass '||v_pass_no);
                         RAISE FORM_TRIGGER_FAILURE;
                    END IF;
               ELSIF v_status = 'A' THEN--'A' stands for available.
                    :workorder_dtls.from_dt := SYSDATE;
               ELSIF v_status = 'H' THEN--'H' stands for help-up.
                         SELECT workorder_no, pass_no INTO v_workorder_no, v_pass_no FROM workorder_dtls
                                             WHERE labour_code = :workorder_dtls.labour_code
                                             AND to_dt <= SYSDATE;
                    MESSAGE('This labour has been held-up for not submitting gatepass.');
                    MESSAGE('This labour has been held-up for not submitting gatepass.');
                    RAISE FORM_TRIGGER_FAILURE;
               ELSIF v_status = 'S' THEN--'S' stands for suspend.
                         SELECT workorder_no, pass_no INTO v_workorder_no, v_pass_no FROM workorder_dtls
                                             WHERE labour_code = :workorder_dtls.labour_code
                                             AND to_dt <= SYSDATE;
                    MESSAGE('This labour has been suspended through workorder no. '||v_workorder_no||' using pass '||v_pass_no);
                    MESSAGE('This labour has been suspended through workorder no. '||v_workorder_no||' using pass '||v_pass_no);
                    RAISE FORM_TRIGGER_FAILURE;
               END IF;
               IF v_status IN ('A', 'I') THEN
                    :BLK_TEMP_WORKORDER.LABOUR_CODE := :WORKORDER_DTLS.LABOUR_CODE;
                    GO_BLOCK('WORKORDER_DTLS_IMG');
                    EXECUTE_QUERY(NO_VALIDATE);
                    GO_RECORD(v_rec_pos);
                    GO_ITEM('WORKORDER_DTLS.FROM_DT');
                    IF :workorder_dtls.from_dt + 180 <= :workorder_master.to_dt THEN
                         :workorder_dtls.to_dt := :workorder_dtls.from_dt + 180;
                    ELSE
                         :workorder_dtls.to_dt := :workorder_master.to_dt;
                    END IF;
               END IF;
          ELSE --if labour does not exist.
               MESSAGE('Invalid labour code');
               RAISE FORM_TRIGGER_FAILURE;
          END IF;
     END IF;
END;

Re-execution of campaign Automation Not working

Hello
We are using Campaign Automation Process to execute Multi Wave
Campaigns with Campaign Elements.When i use the "Start Process" button
in the Campaign Automation Graphical Modeler to execute the Campaign, it
works fine for the first time.However if i again re-execute the Campaign
Process using "Start Process" button in the Campaign Automation Applet
modeler,re-execution fails and it says that the "Execution of Campaign XXXXXXX has already
started" and "Campaign was not started".Please note that i have re-triggered the execution process only after the First execution has been successfully done.
Is it not possible to re-execute the Campaign once it has been already
executed using Campaign Automation Process?May be i have missed some customizing steps.
We are using SAP CRM 7.0.Any help will be appreciated.
Thanks,
Abhishek

Hi, Abhishek!
Have you found the solution how to restart/re-execute the campaign?
Appreciate any help with this subject!

Automator not working properly while setting comments and moving files to folders, how to proceed?

So, this is my workflow, i've converted it into a folder action and applied it to a folder called "Automator" in my desktop:
i've turned "show this action when the workflow runs" so I can see what is going wrong
here's what I get (each action happens to have a problem to it)
1) Get specified finder items
2/3) Filter / find finder items
those are there just to work for this simple porpouse: identify that i've dropped a pdf file in the "Automator" folder
I move the PDF
The workflows starts
4) Ask for a text
this would be a prompt for me to add a comment to go to the "Spotlight Comment" section when I click on "get info"
put instead I get this...
that's the directiory that the file is in!
so I type some random text that would go to the spotlight comment section
then click OK
5) Set Spotlight Comments for Finder Items
that's the actual action, it should have the text that i've inputted in the last step, but instead it has this:
(Text is the variable that i've setted up to be shown on the ask for text and set spotlight comment...)
so, I have to manually input the comments I want to be on the file
and click continue
6) Label Finder Items
That's the action where i'm suppose to choose the label color, so I do that and click continue
this should work, but the file doesn't change label at all
nothing happens.
7) Move Finder Items
It should move to the "untitled folder", but again, it doesn't.
and that's it.
It's a PDF file, but it's not recognized by the system as a PDF.
When it is recognized, if I move more than one PDF file, the workflow works for just one PDF, instead of working for all of them!
I would reeeeally appreciate any help
the whole point in this was for me not to buy Hazel, but I think I will end up buying it :/
thanks for any help anyone can give me!

hey red_menace, thanks veeeery much for your support, I really appreciate it
as you can notice, i'm new to the automator, i'm actually new to the whole software thing, I have no idea what I'm doing so I really appreciated your help, changed my life and made my day
BUT, it didn't work...
well, it did, partially
I still don't get any comments on the "Spotlight comments" area and when I convert the workflow to a folder action, it does not recognize the file!
here's my workflow:
here's what I did, step by step:
first I added find finder's items, that worked really well, but it labeled all the finders files that were in the folder AND subfolders (the ones that were suppose to already be labeled right)
then I removed the find finder's items and tried, worked well, but I hadn't checked the "ignore the input", so the comments weren't working
so then I ignored the input on the actions that didn't require an iput, so my workflow is the same as yours now… and It's not working.
at first it worked for only 1 pdf, but no comments
then it worked for 50% of the pdfs, with comments
then it stopped working at all.
added the find finders items
worked while testing with one
saved
tried with 7 at the same time
worked… but didn't get any spotlight comments
went back on automator
checked "show this action when the workflow runs" for the spotlight comments action
added the variable as an answer on the "ask for text"
the variable ran as expected, I had the same input I've inputed as an answer for the "ask for text" on the "spotlight comments" action, label went okay and stuff, but i did not get any spotlight comment on the spotlight comment section!!
went back on automator and checked out the "append to existing comments" on "set spotlight comments for finder items"
and still didn't get any comments on the files!
btw, I went back on the automator and removed the find finder items
then tried again with only one file, dropping it in the application. it worked, but I still didn't get any spotlight comments!!
I also tried deleting the ask for text and tried just
but it did not work
I also converted the workflow that working for all expect the comments to a folder action, and it DID NOT recognize the pdf I dropped in the folder, what do I do?!

Right Click not working in published output. ??

I'm relatively new to Captivate, and NOT a developer, so please bear with me on this.
I'm recording a training video of a basic application and have a need to use a right-click to bring up a menu. This is a requirement of the app, so I need Captivate to provide the same functionality to avoid confusing the user going through the training video. I have the Click Box options set to Right Click, and it works in the Preview. However, when I Publish the finished video, the right-click does not work - only a left-click will advance to the next slide.
I found a few threads discussing issues with the right-click, but all of them were dealing with permissions issues. I'm saving the output to my desktop (Windows XP) and am launching the HTM file to confirm the video is working properly, so I don't see how a permissions issue would come into play. ?? If it is a permissions issue, how do I fix it within Captivate so that the end user can run this from any PC/MAC, where I have no control of their permissions?
Any suggestions or tips on how to get the right-click working in the final product are greatly appreciated.
D

Hi there
The right-click function relies on JavaScript. JavaScript may also be influenced by the Flash Security Settings.
Please try what is outlined in the link and see if your right-click suddenly begins working. Also note that you don't need to adjust these settings if you are serving content from a server. You only have to worry about it if you are testing by running from your local C drive.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Clear form not working in multi record form 10g.

I have a multi record block form, when sys_indicator is 'Y' in any of the records, user should not be able to delete this record. In Pre_delete trigger, I put this code
below.
IF :CST_REFERENCE_CODE.SYS_INDICATOR = 'Y'
     THEN
     MESSAGE('You cannot delete this record. Consult your Administrator');
     MESSAGE(' ');
     CLEAR_FORM(NO_VALIDATE);           EXECUTE_QUERY;
--     RAISE FORM_TRIGGER_FAILURE;
     END IF;
I want to clear form an re_query, but the clear form is not working. Help

CLEAR_FORM is a restricted built-in and is not allowed on PRE-DELETE trigger.
the purpose of PRE-DELETE trigger is to do some validation before the actual delete happens and may be delete the child records before the master record can be sucessfully deleted.
it will be better if you could explain that why you need some different functionality on PRE-DELETE trigger, which looks strange. Like, user is trying to delete the record and you want to restrict user from deleting the record if some condition is met and want to re-query. what is the main purpose of doing query here again or why you want to clear the form.

Volume Automation Not Working In Logic

So, I have been doing some audio work with about 12 different tracks or so and at certain points, I need to use automation to completely lower the volume at certain points to infinity. Yet whenever I listen to the track, on some tracks, the volume automation will either ignore those points when it's supposed to go down to -infinity, and stay at 0 dB. Or conversely, sometimes it will go down to -infinity and stay at that point when it's supposed to go back up to 0 dB.
Does anyone know what's causing this or what could stop it? I'm using Logic Pro 8. Thanks!

I'm having the same problem. (Sorta) Automation was working and now it's not. READ is on.

ToolTip_Text not working in multi - record block - Please Help!!

Dear Friends & Gurus,
I'm using Forms Version 6.0.8.21.3 (due to many reasons) in C/S mode. Now I have a multi record block in which I am showing the Employee No. My customer's requirement is when I place the mouse on this Emp no., the emp. name must be displayed. I thought of achieving this by ToolTip_text. For this I'm having a Database function which returns the name (as I use this functionality in many forms), in the When-New-Item-Instance block level trigger I'm calling that function with passing the emp code as below
SET_ITEM_PROPERTY(:SYSTEM.CURSOR_ITEM, TOOLTIP_TEXT, FUNC_DIS_EMP_NAME(:SYSTEM.CURSOR_VALUE));But it is working only when I point the mouse in the first record. When I click on 3 or 4 record and then point to the first record, I'm getting the 3 record's name but in the first record.
Please help me - I searched through the forum and I find no accurate answer. It is urgent - please help.
Thank you.
With Kind Regards,
Perumal Senthil Alagu.

Dear Safwan Bhai,
As salaamo alaikum Rahamatulla hi burakathu!!
Actually I'm having a multi record block in which all the emp no., days of attendance, etc will be displayed when I click on the search button. My requirement is when point the mouse over the emp no, the emp name must be displayed as a Tool tip text. My fields are non-editable, so Post-Change is not working. I placed the coding in the When-new-item-instance - in this case the emp name is displayed, but only for the first field, when I move the mouse to second and third fields, the empname of that particulart field is displayed as a tool tip but in the first field only.
Any other suggestions?
Anyway I would appreciate your help.
Thank you.
With Kind Regards,
Perumal Senthil Alagu.

SubVI with while loop + event structure not working in multi tab VI

Hello Everyone,
I am developing an interface for the control of a prober using Labview 2012, and I am stuck with some issue.
To start with I provide you with a simplified version of my control interface VI, and with the sub-VI used to build and manage the wafer maps.
The VI consists of several tabs: Prober Initialization, Wafer Handling, Wafer Map, Status, Error.
The sub-VI can:
1/ initialize the grid to display the map (sub VI Init Grid not provided here)
2/ import XY coordinates from a txt file (sub VI Wafer Map Import)
3/ display the coordinates and index of the die below the cursor
4/ and when a die position is double clicked, and the boolean "Edit Wafer Map" is true, then the user can change the state (color) of the die between On-wafer die and Selected Die
My issue:
If I use the sub-VI by itself, it works fine. However when I use it as a sub-VI in the tab "Wafer Map", the map does not build up and I can no further use the embedded functionalities in the sub-VI.
I suspect the while loop + event structure of the sub-VI to be the bottleneck here.
However I don't know which way to go, that's why I'd be glad to have some advice and help here.
Thank you.
Florian
Solved!
Go to Solution.
Attachments:
Control Interface.zip ‏61 KB

Hi NitzZ,
Thank you for your reply.
I tried to save the VIs in LV10, please tell me if you can open them now.
Inside he event structure there is quite some code, and since I don't want to make the main vi too bulky, I would like to keep it as a sub-VI.
As you can see from the sub-VI, the event structure is used for extracting cursor position and tracking the double click action. These events are linked, through a property node, to the image "Wafer Map" which is passed to the main vi through connector pane.
All values are passed this way as well (through connector pane). Is there another way?
Maybe "refnum", but I don't really understand how to use them...
If I use the event structure in the main vi, the wafer map is still not working. I tried it earlier.
To implement the multi tab front panel, I used a tab control, and a for loop + case structure. For each element of the case structure, there is a corresponding action.
For the case where I put the code (element=2) for Wafer Map, I also control the execution of the code with a case structure activated by the button "REFRESH". Otherwise I end up with a freezing of the panel right after the start.
I hope these comments help you understand better.
Regards,
Florian
Attachments:
Control Interface.zip ‏104 KB

Automator not working properly after updating to OS 10.10.2

I just updated to 10.10.2 and Automator in Safari is not working properly. I set up 10 URLs to open but only the first 4 open. The rest give a message "You can't open Safari because it is not responding". Any help would be appreciated.
Thank you
Using an iMac 21.5, late 2013

Happen to me too. Looks like a Bug. Installed 10.9.2 and it turned on Safari in the iCloud Sytem Preferences.
Thank god I had a backup. And then my wife logged into the same computer and it messed them up again.
I wish I knew where the iCloud bookmark file was. I've tried goggling it, ut no luck.
So If at one point in time if you turn it on it uploads the bookmark file somewere in the cloud, then you turn it off then change your bookmarks to something differnet it's OK. Just don't turn it on again.
Hopefully the bug was on the software update!

Dynamic Hyperlink not working in word output

Hi,
I am trying to add employee's mail id as a hyperlink in word output file but it is not working. In the link it is appending the path of server directory where file is getting exported. Please help me with this issue as i am not sure where i am making mistake in the code.
<?variable@incontext:e;.//fields/field[label=’Email’]/value?><fo:basic-link external-destination="{$e}" color="blue" text-decoration="underline"><?$e?></fo:basic-link>
Thanks and regards,
Aditya

ok
<?variable@incontext:e;VAL?>
<fo:basic-link external-destination="mailto:{$e}" color="blue" text-decoration="underline"><?$e?></fo:basic-link>works for me
may be "<?variable@incontext:e;.//fields/field[label=’Email’]/value?>" wrong?
so post sample xml

Reader X: Read Out Loud function not working; no voice output

I was using this function in the Reader 9.4 but the voice got the text a bit garbled at times, so I thought I'd try the latest version of the Reader and see if the passage was less garbled. Reader X has no voice output at all, even after setting and confirming accessability config. I messed with all 3 options of text buffering. I know the pdf file I'm viewing is ocr not image (at least Reader 9.4 could read it w/ a bit of it being garbled). Not sure what else to try; Text Aloud voices still work in that application.

I'm just now bumping into the problem again. I've got choices in "preferences - reading" of 3 AT&T voices and the default MS voice. I prefer the AT&T Voices that I got from text aloud. But they don't work even if I can point to one of them via preferences. But the default MS voice works I found out, eventaully. I guess I'm OK w/ just that voice available to me rather than "enabling protected start up" and reinstalling the AT&T voices (think that's what you suggest to do). BTW, "enabling protected start up" is already set so maybe this would not work. Also not sure I have the voices on disk so... can I even reinstall them?
Thanks for the help.

Azure Pack / SMA Automation not working properly

Hi,
We have setup SMA web services and runbook workers on 3 servers. We configured WAP on one of the servers.
We also load balanced the 3 web services and have just a single url (https://smaws.domain.com)
It seems like the automation piece doesnt work and results in a red exclamation point. Initially it accepted our endpoint URL but now its not working.
Is there a log file that I can look at to see what the problem is?
Is there a way to change the endpoint URL?
Thanks
Thanks Lance

It sounds like Logic's handling of DAE. Not being a Digi guy, I haven't memorized al the differences but I know the implementation is incomplete.
I work in native... I think 7.1.1 was the last version I used on a Logic rig with DAE in real use, actually I know it was not 7.2, because I set that rig up.
7.2.1 stable? I tried it on my system and gave up after a few days of terror. 7.2.0 has been the best L7 for me, personally. For you on a Digi system, it may be completely different. Also, many users are very happy with 7.2.1 so don't let my days of terror change your mind too much. I think the new templates are a good way to go once thigs are configured. Objects get old and cause problems with Logic. With every increment to the tenth, (7.1, 7.2) I update all my templates and afer every minor trash the prefs...
"Too many automation tracks" has never hit me, If my memory serves me well.
I did see:
"Logic Pro found 8 audio files in 24 bit format.
This format is unsupported and cannot be played back
√ Show this message again
OK
I found it so amusing I took a pic of it, and the 16 bit error like it I saw. This was during the 7.2.1 days of terror.
Re: resources.
Definitely sounds strange. New templates, tune the config. I would try 7.2.0. If you still have the app you can just put it in your app folder. AFAIR, this only updated LP7.app contents. If you want to be certain, see the receipt.
Good Luck,
J

Automation not working in multi output stereo?

Similar Messages

Maybe you are looking for