Automation of Batch session
Hi Guys,
One SAP standard program (SAPF120) creating the batch session in SM35, i need to automation the session, Could you please provide step by step process to automation the batch session.
Thanks
Gourisankar
Hi,
Thanks for inputs...
when i exected the program "RSBDCSUB", it is asking the program below things
Session "SAPF120 "
Created on
From Today Date
To 31-12-9999.
Will these inputs sufficient, do i need to provide more info.
Thanks,
Gourisankar.
Similar Messages
-
Error in batch session processing in background mode
Hi ,
I am trying to do data transfer using batch session for transaction FD32.
Here the batch session is executing when I am processing the session in foreground.
Whereas in background mode it is failing.
Please check and assit.
Regards
KishoreHi Kishore,
Probably it will be some information or warning message which is coming in the background execution of the session.
That is the reason your session is going into error. Run the errored out session once again in foreground mode. You will get to know the reason of failure.
Please let us know of any doubts.
Cheers
VJ -
Error While Processing Batch Session in Background Mode
Hi,
I am creating batch input sessions for Transaction FB01. Each Batch Session will have multiple transactions for FB01. My Batch Session is getting created. But when i am trying to process that batch session in backgroung mode ( thru SM35 ), it is failing. The Error says "Transaction Error". And when i process the same session in foreground mode, it is getting successfully processed. Any suggestion in this will be very helpful.Hi,
Check in your program if you have properly handled the OK codes.after every transaction is complete the 'Back' button has to be triggered.That could be the reason it's working in FG mode and not BG mode.Generally,OK Code is '/EBCK'.This should work. -
How to stop the internal batch session
Hi ,
How to stop the internal batch session, which is triggered from the program.
When I execute the program, there is an batch session, which starts processing in parallel with the program, and causes an error message for the program, so the further process is affected.
I tried finding the session through the Transactions - SM35, SM37. However, I could find any session in my name.
However, when I try thro SM04, I could find an session with the same error message. But I am not able to end the session.
Pleas advise.
Thanks,
cartesian.Go through transaction SM50. In case you have more than one application server (transaction SM51 will show) you can also use SM66 which will show all running processes on all application servers.
With SM50 you will only see the process running if it is running on the same application server you are logged on to.
Mark the process and use menu 'Program/Session - End Session' or 'Process - End with or without Core'
Hope that helps,
Michael -
No batch session created for report RFUMSV50
if i execute the report RFUMSV50 for batch session, in sm35 no session is created.
when i first time ran, then batch was created. i have not changed anything in settings. after that
i posted 5 end to end cases from po to payment. now if i run report no batch session is created
where is the problem?
help pleaseOk
But this report is not updating the records and no tax is transferred from interim tax account to final tax account. Also the output of the report is showing no value. It is blank. -
How to read the messages from the processed Batch session log
Hi All,
I am posting an accounting document through FB01 by submitting the report RFBIBL00 along with the file through which a Batch session gets generated in SM35.The Batch session is then processed by submitting the report RSBDCSUB. My code is as shown below:
SUBMIT rfbibl00 WITH ds_name = co_file_output
WITH callmode = co_batch AND RETURN.
Process Batch session
SUBMIT rsbdcsub
WITH mappe = gv_name_jd
WITH von = sy-datlo
WITH bis = sy-datlo
AND RETURN
My requirement is to capture the document number from the log of the processed batch session. Can anyone suggest me how to go about this.
Thanks in Advance,
Vinay BHi,
check the routine read_bdc_log_plain in program rsbdc_protocol.
get the data from table APQL and then use the logic.
bapiret2-id = logtable-logmessage+74(16).
bapiret2-number = logtable-logmessage+94(3).
bapiret2-message_v1 = logtable-logmessage+100(20).
CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
EXPORTING
id = bapiret2-id
number = bapiret2-number
textformat = 'ASC'
message_v1 = bapiret2-message_v1
IMPORTING
message = bapiret2-message.
WRITE: (60) bapiret2-message.
Edited by: Keshav.T on Apr 7, 2010 4:23 PM -
Change name of batch session in fast entry
Hi all,
we want to record changes with PA70 in a batch session. Unfortunatly the system generates a name for this session but our users only have specific authorisations for certain names.
Does anyone know, if I can change the name in the fast entry screen or give any other hint. The authorisations <b>cannot</b> be changed and the users <b>must not</b> use the direct input.
Thanks
MichaelHI Michael,
I don't think you have an option to change the Session name here.. the Groupid ie the session name gets defaulted based on the Infotype you select for input.. which in your case is PA700014.. this happens inside the std function module HR_CONVERT_FIELDS_FROM_INFOSET.. infoset here being the Infotype selected.. You may be better off modifying your checks to allow session names with PA70* for your Users..
~Suresh -
No batch session created for forex run error
Hello
We have run the forex run on 31st may and have included the reversal as well(1st June).This got completed sucessfully with revaluation and its reversal the first day of next month.After a week we reset the forex run,then it should reverse both the revaluation on 31st May and reversal posting on 1st June.However when the reset was run ,the period 31st may was closed which was noticed after the forex reset run was .We selected create postings with the batch session and also checked to create batch session if any errors.
During the reset ,the reversal postings on 1st June got reversed but the forex revaluation on 31st may didnt get reversed(as period was closed).But there is no batch session created.
Please let us know why the session hasnt got created or what could be the reason why batch session in SM35 is not found,if the period was closed for reversal during reset it should have created batch session.
Please advice.Hi
If your reversal posting have been generated for 1st June, check also in SM35 if there is a batch session in error under Incorrect Tab/In Process/In Background Tab of SM35
Thanks & Regards
Sanil Bhandari -
FM to check status of Batch Session (SM35)
Hello All,
Can you please provide me a FM to check the status of the Batch Session (SM35) whether it is available or not.
Thanks,You can use the function module BDC_PROTOCOL_SELECT
for this pass the session group name you get the details.it will retun the status also. -
Batch session not generated in FF67
Dear All
I have entered some transactions in FF67 and then saved it and posted it. My processing type is 2. I have defined the posting keys for BRS and also assigned the GL account. However the system has not generated a batch input session in SM35. In the over view of the statement, system is showing an entry for IN51 as GL posted and IN01 as Not to be Posted . What could be the error?
Regards
Sanil BhandariHi
With the same config and figures, the batch session is generated and posted in testing. But in prod envior i am not able to generate the session. More ever, there is no statement with the id in FEBA
Regards
Sanil Bhandari -
Please tell me the cases when I will use Call transaction/ Batch Session.
Can you please tell me when I will use Call transaction or Batch Session in the time of uploading data through BDC.
Regards,
SubhasishHi subhasish,
1. One of the main criteria is
2. If error handling facility is required, then batch session is the best,
otherwise if we use call transaction, then error handling code,
has to be written in the program itself.
3. Batch session provides lot of facilities to the user.
regards,
amit m. -
hi experts,
My program is Batch session and the batch session is for posting fi documents(FB01). and iam doing by using rfbibl00 program. Actually there r 3 types of currencies while updation and one of them is company code currency(dmbe2). My requirement is i should not pass the value for company code currency dmbe2 when the currency key is equal to USD.
what they said is check in table T001 for example if the company code(BUKRS) = 1001 then check for company code currency(dmbe2) if it is equal to USD then dont pass the value dmbe2 to session.
please help me with the code.
Thanks and regards,
Ramya.hi
check with this logic
select single * into work area from t001
where company code eq '1001'.
if sy-subrc eq 0 and
workarea-WAERS eq 'USD'.
dmeb2 = ' '.
else
demb2 = 'pass the value'.
end if.
If you are doing this in side the loop, then instead of taking "select single *", write the select statement outside the loop for t001 and take values into internal table. Then inside the loop user Read statement in the place of "select single *"
Reward if it dose.
Thanks
Siva kumar -
Hi gurus ,
I am not getting any batch session when I am running ff67. In sm35 i am not getting related batch session.
Please Guide.
ThanksHi,
Go to below mentioned path and enter the symbols created for bank reco
SAP Customizing Implementation Guide> Financial Accounting (New)> Bank Accounting> Business Transactions> Payment Transactions>Manual Bank Statement> Electronic Bank Statement> Make Global Settings for Electronic Bank Statement> Create keys for posting rule
Best of luck -
Batch Session Errors Notification Program
Does SAP provide a program which will notify users if a batch session has errors? I am looking for something which would send an e-mail or something, if I gave it the session name and the users to notify.
I guess it would be some kind of Batch Session Monitor Program.
thanksI dont think a standard program is available .
the log details you can get from apql table, build a custom program for your requirement.
Check the where used list of apql table for any Fm's available.
For getting the log refer link:[Program To Download Batch Session Log|http://www.sap-basis-abap.com/abap/program-to-download-batch-session-log-into-excel.htm] -
Error while running Batch Session for T.Code F.19
While processing T.Code F.19 in Batch Input Sessions, the log shows following error: "For document type SA, an entry is required in field Reference. Can anyone please help me resolve this issue?
Thanks in advance!
Regards,
AMDHi
If your Batch input data is very less, run in foreground and update it manually or
Goto GGb1 select Fi accounting and create substitution under header of the document and keep necessary settings like below
Prerequisite
BKPF-BUKRS = xyz AND SYST-TCODE = F.19 and SYST-UNAME = your user id
Substitution
BKPF-XBLNR = keep any default value
Reg
Vishnu
Maybe you are looking for
-
I-phone is not recognized by my laptop
I haven't backed up my iphone 3 to my laptop for a while and now it won't recognise it. It won't even charge it. My laptop does for other i-phones. Any suggestions?
-
My iPod 6th Generation has just a white screen
My iPod 6th Generation has just a white screen and I can't do anything with it. What do I do to fix this, and what happened?
-
How to implement drag and drop functionality in a HTML5 webpage using touch events?
Hi all, I need to create a webpage having two parts.One part is having set of SVG images into it and other part is having canvas.I need to drag those image onto the canvas allowing same image for multiple times and those images on the canvas are
-
My files are locked and I can't edit them!
What is happening? I have DW CS4. I am trying to edit a site have used for years - my own site! Every file I try to open, I'm told it is locked and is View Only! This has never happened before. What is going on? Help!
-
Lost settings and import tab on with itunes 10
We've lost the settings and import tabs that are supposed to be at the lower right in itunes. Any idea how to get them back. And/or how else to import music from an old computer to a new one using home sharing.