Automator "Connect to Server" doesn't work with spaces in volume name

I'm trying to use an old Automator Workflow I had set up in Snow Leopard that connected to a list of specified server mounts (both Windows smb:// and Apple afp://). It works fine for most of them, until it hits a mount point that has a space in it, where it fails. Looking at the debug area it looks like it's trying to connect to "smb://Server/Example%20Name" instead of "smb://Server/Example Name" and failing. Yet, when I use the "Connect to Server…" functionality in Finder, the same URL works just fine. Is there any syntax that will make this work correctly in Automator?

As I said I never used this before Lion and I don;t have any smb shares to test on but this is what I've found which may be of help:
The following workflow connects to my MB from an iMac:
Notice that the MB name is administrator's MacBook with a space and an apostrophe. Notice the %chars for the space and the apos so I don't think that the %20 for the space in your case is causing the problem.
When I tried this by entering afp://administrator's MacBook it failed. The error message showed the special chars converted as in the url that worked what was missing was the everything after the _ in the name.
When I did a connect to server in the Finder and selected Recent servers from the pull down and selected administrator's MacBook the url in the action above was shown. I copied the url from the server address line and pasted into the Automater action.
This might be of some help in your case at least it might show if the %20 is really causing the problem.
regards

Similar Messages

SYMLINK won't work with space in folder name

Using Terminal commands, I can create a SYMLINK for OS folder if there is no space in folder name, such as -
sudo rm -rf ~/Library/Mail/
ln -s /Volumes/Mr._Mac/Mail/ ~/Library/Mail
But if there is a space in the OS folder name, commands won't work, such as -
sudo rm -rf ~/Library/Application Support/AddressBook/
ln -s /Volumes/Mr._Mac/AddressBook/ ~/Library/Application Support/AddressBook
Terminal returns the following message -
ln: Support/AddressBook: No such file or directory
Is there some sort of symbol that needs to be used instead of a space so that Terminal reads the folder name as one word?
I've tried % which is used for HTML, but that doesn't work.

Put the entire path in single quotes or put a \ before each space. If you drag a file or folder from the Finder, it'll automatically supply the correct path.
(77913)

Connection to VPN doesn't work with exclamation mark on Network symbol

Hello everyone,
I'm new to this forum and not really professional in VPN stuff, though I'm an experienced computer user and programmer. I'm using Cisco VPN
5.0.07.0440-k9-x64 from the Paul Scherrer Institute on Windows 8 64-bit. The program was working previously fine, but at some point, whenever I connect to VPN and login, I lose connection to the internet, and nothing related to my internet connection work, and I see an exclamation mark on the wireless network symbol. And when I disconnect the VPN, I get everything back to normal.
I got almost the same problem when I installed Kaspersky Internet Security due to some suspicion on security, but then I removed it and everything was back to normal. After that, the VPN worked for some time, and again didn't work anymore at some point. First thing I tried is disabling the Windows Firewall, and it didn't help.
My network adapter is: Qualcomm Atheros AR9002WB-1NG Wireless Network Adapter
In my network adapter, I can't change the TCP/IP v4 Configuration. When I double click, it says something like: "For the configuration of TCP/IP, there must be a network device installed and activated" (The sentence is translated from German, my Windows is German).
Is there like a "global reset" that would get the VPN to work again? What should I do?
Please advise, and if you require any piece of information, let me know.
Thank you.

I'm using now VPNC on linux. No more cisco! Crappy program and crappy support!

Camera connection kit (USB) doesn't work with iPhone 3Gs / Canon EOS 30D

When I plug in my iPhone 3Gs or Canon EOS30D to the camera connection kit via USB the iPad behaves strange: One time nothing happens at all. The other time "photo" starts, showing the "camera" button which disappears immediately after a few seconds. Actually I was only able to import photos when I push the connection kit against the iPad o.o ???
Does anybody has had a similar problem ?

Do you have a case on the iPad the is interfering with getting a good connection? What cable are you using: Is the battery in the camera almost fully charged and is it on the right setting? I could no find any previous discussions on your particular camera but other users have reported not being able to download from some cameras.

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that.

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

I configure the JServ , but Oracle HTTP Server doesn't work agian

my Oracle HTTP Server doesn't work after i've configured the JServ by Oracle Enterprise Manager.
when i run flowing command :
D:\oraias\dcm\bin>dcmctl getstate -v
and Error message : "ADMN-100999 Base Exception:
java.lang.ClassCastException:java.lang.Boolean" has shown.
and i navigate Enterprise Manager web site these Error Message showing:
"Your browser or operating system is not a supported client configuration for this version of Enterprise Manager. Using Enterprise Manager with your current client configuration may result in incorrect display of data or incorrect updates to configuration settings. See the release notes for information on supported client configurations. Root Cause: java.lang.Boolean. java.lang.Boolean"
how can i do? please help me.
THX

The key message -
mod_plsql: /pls/htmldb/htmldb_login HTTP-503 ORA-12541
Looking up that error gives -
[jes@spdb1 ~]$ oerr ora 12541
12541, 00000, "TNS:no listener"
// *Cause: The connection request could not be completed because the listener
// is not running.
// *Action: Ensure that the supplied destination address matches one of
// the addresses used by the listener - compare the TNSNAMES.ORA entry with
// the appropriate LISTENER.ORA file (or TNSNAV.ORA if the connection is to
// go by way of an Interchange). Start the listener on the remote machine.So it looks like the listener isn't running for your database to me (i.e. "lsnrctl start")

Does Server Monitor software work with Mac Pros?

Last time we were purchasing a new server we noticed that Server Monitor doesn't work with Power Macs. Is this still the case with the latest Intel-based Mac Pros?

Hi again Christiaan-
Just to clarify, are you saying that OSX Server is running on the Power Mac and you are using another computer to connect?
If so, which version of each software and which Power Mac?
I am curious as I've had no problem with said configuration.
Luck-
-DaddyPaycheck

ITeufel Radio v2 doesn't work with iOS 5.0.1

My iTeufel Radio v2 doesn't work with iOS 5.0.1.
It does not charge (just a short "beep" when connecting, but then it does not charge) and the audio function also doesn't work.
I already tried to reset the phone, but this didn't help.
Any ideas? Thank you.

I got Wi-Fi to reconnect by restarting my router and re-entering the wireless password. I wonder if the wireless account passwords were lost in the update process? I wonder if I would have just had the phone “forget” the wireless account and reconnect if that would have worked.
On an interesting side note, the exchange server connected after I got Wi-Fi back working! I am wondering if there is a issue with 3G and the new IOS 5.01? I could not get any exchange connectivity after the update on 3G.

Is it true MS Office doesn't work with Lion?

I just purchased OSX Lion and while it was downloading I began to read the reviews. I saw multiple comments that MS Office doesn't work with Lion. I forced a shutdown on my MacBook Pro because I couldn't see any other way to stop the LIon download. Now with it back on, the download is paused. I don't want to resume it until I find out if it's true about office. Any help?

Len , MS2008 does require Rosetta. Ms2011 does not.
W7ox, I tried 2 different licenses. I have 12 licenses here on site. I resorted to reading it straight off the box and still no joy. Very strange!
Incidently. I can not access the Snow leopard Server either via the normal 'Go' and 'connect to Server'.
Have tried afp and SMB. no joy.
I am wondering if the ethernet Dinlge adpater to the Rj45 connector has any hardware issues?? will keep expeirmenting and any feedback appreciated, as I am NOT going ahead with any Lion updates on 12 macs until I know more about its bugs! ciao

The DB tools doesn't work with Microsoft SQL

I am tring to write series of waveforms to a database. The DB tools doesn't work with Microsoft SQL, but when i replace the SQL with Access, it works fine. I have to use SQL in the application.
Any advice pls?
longing for your reply.
Attachments:
test.vi ‏47 KB

Right off hand I would say the problem is that you are connecting through ODBC. Try the native SQL Server driver, your connect string should define the provider as "SQLOLEDB.1".
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

HT5706 I am trying to set up Apple TV with my Uverse WiFi, but I get errors when entering my password. One site said that Apple TV doesn't work with WPA which Uverse uses. Is there anyway around this or will Uverse and Apple TV just not work together.

Trying to set up Apple TV with ATT Uverse. I get errors when trying to enter my WiFi password. One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption. If true, does that mean Uverse subscribers cannot use Apple TV?

Spurs63 wrote:
does that mean Uverse subscribers cannot use Apple TV?
No, that's a rather silly conclusion.
There are two options:
stop using the crappy router provided by the ISP.
Physically connect the ATV to the router via Ethernet.

Wireless Music doesn't work with new software

Hello-
I can't get my wireless music to work after I update the software to the latest version. The only one that will work is when I install it from the CD. But, I would like to use the most recent version of the software. As soon as I update, the Media Server won't launch on my computer. I am using a linksys WRT54G wireless router. If I check DHCP clients, the wireless music receiver is successfully getting an IP address. I have tried all of the things that linksys suggested (disable WEP, firewall, broadcast SSID, etc...) to no avail. Has anyone gotten the latest media server software to work with WRT54G? I have tried it on both my XP and W2K machine, with the same results (doesn't work).
Thanks,
Rich

Hi Jeremy
I have the similar problem, I've installed the software on my desktop, no error messages (apart from the certificate) and everything seems to be fine. After about 2 minutes the message appears that the network is not ready and consequently the media server is not running.
Without the server running I can't setup the Network and the entire system is not working. I could ping it but that was about it.
I've reset my router, renamed the SSID, tried with and without WEP, MAC, without firewall, opened a new account on my desktop with admin rights installed the software again into a new folder - result still not working, same error message.
To make really bad, I installed it on my laptop, same procedure and it works fine! So it seem that it has nothing to do with my wireless devices or configurations, there must be a problem while setting up the software on my desktop.
I really would appreciate your help a lot!

Cheers

Balz

Media Encoder CS4 doesn't work with Premiere (pic related)

Oh hai!
I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
Encoding failed
Could not read from the source. Please check if it has moved or been deleted.
And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Automator "Connect to Server" doesn't work with spaces in volume name

Similar Messages

Maybe you are looking for